丙烯酸甲酯与醋酸乙烯酯的种子乳液聚合

以过硫酸铵（ＡＰＳ） 为引发剂,合成了粒径分布较均匀的聚醋酸乙烯酯种子乳液（ＰＶＡｃ） ,然后以丙烯酸甲酯（ ＭＡ） 为第二单体和以油溶性偶氮二异丁腈（ＡＩＢＡ） 为引发剂,分别进行不溶胀与溶胀条件下的无皂种子乳液聚合,并用透射电子显微镜（ＴＥＭ） 表征了胶粒形态．表明在不溶胀条件下,胶粒形态随ＰＶＡｃ／ ＭＡ 重量比的不同而变化,当ＰＶＡｃ／ ＭＡ 为１／２ 时,形成以ＰＭＡ 为核,ＰＶＡｃ 为壳的胶粒．在溶胀条件下则得到类似互穿网络型乳胶粒．     

氯丁胶乳-聚甲基丙烯酸甲酯复合乳胶粒结构形态

以氯丁胶乳（Pa）为种子乳液,甲基丙烯酸甲酯（Pb）为第二单体,采用种子乳液聚合法,制备了氯丁胶乳-聚甲基丙烯酸甲酯复合乳胶粒。 热力学分析表明,当Pb的体积分数Φb＜0.69时,可同时形成Pa-Pb型正核-壳和（Pa＋Pb）分离型乳胶粒,当Φb＞0.69时,形成Pb-Pa型翻转型核壳结构乳胶粒,并伴有Pa-Pb型正核-壳结构乳胶粒的形成。 动力学分析表明,引发剂类型、第二单体的加入方式、种子乳胶粒的交联、单体/聚合物质量比是影响乳胶粒形态的主要因素。 采用水溶性引发剂过二硫酸钾（KPS）,以饥饿态方式加入单体,氯丁胶乳 聚甲基丙烯酸甲酯(PCR-PMMA)复合乳胶粒呈现正核-壳结构,以充溢态方式加入单体则不能形成明显的核-壳结构;而以油溶性偶氮二异丁腈（AIBN）为引发剂时,单体无论以充溢态方式加入还是饥饿态加入均倾向于形成翻转核-壳型粒子。 在种子乳胶粒中加入一定量交联剂二缩三乙二醇二甲基丙烯酸酯,有利于形成明显的正核壳结构。 以饥饿态进料,KPS为引发剂时,随着单体用量增加,壳层变厚,仍呈正核-壳结构,与热力学分析结果相吻合;以AIBN为引发剂时,随着单体用量增加,PCR-PMMA复合乳胶粒逐渐由翻转核壳型结构变为互穿结构。     

一种具有核-壳结构的聚合物纳米胶粒的制备及其药物运载性能

以丙烯酸异丁酯(IBA)、甲基丙烯酸二甲氨乙酯(DMAEMA)、丙烯酸羟乙酯(HEA)作为聚合单体,利用种子微乳液聚合制备了一种具有核-壳结构的聚合物纳米胶粒P(DMAEMA-co-IBA)/P(IBA-co-HEA);采用红外光谱仪、动态激光光散射仪、透射电镜分析了所得胶粒的结构和形貌;将叶酸成功嵌入聚合物胶粒,得到直径约293nm的球形载药胶粒,利用药物体外释放测定了药物运载性能.结果表明,所制备的共聚物纳米胶粒呈球形,直径约275nm,粒径分布较窄,并具有核-壳结构;其对药物具有缓释性和pH响应性.     

Fe3O4／P（St—AA）核—壳复合微球的制备和表征

以磁性氧化铁胶体粒子为种子，运用分散聚合法，制备出具有磁响应性的Ｆｅ３Ｏ４／Ｐ（Ｓｔ－ＡＡ）核－壳复合微球，考察了复合微球的形态及结构，测定了复合微球的粒径和磁响应性，研究了分散介质，引发剂，聚合单体和种子粒子等因素对复合微球形成的影响。     

Fe_3O_4／P（St－AA）核－壳复合微球的制备和表征

以磁性氧化铁胶体粒子为种子，运用分散聚合法，制备出具有磁响应性的Ｆｅ_３Ｏ_４／Ｐ（Ｓｔ－ＡＡ）核－壳复合微球。考察了复合微球的形态及结构，测定了复合微球的粒径和磁响应性，研究了分散介质、引发剂、聚合单体和种子粒子等因素对复合微球形成的影响。     

种子乳液聚合法制备多孔乳胶粒

用批量乳液聚合法制备了苯乙烯（Ｓｔ）———甲基丙烯酸甲酯（ＭＭＡ）二元共聚种子乳液Ｓ１以及Ｓｔ ＭＭＡ 丙烯酸（ＡＡ）三元共聚种子乳液Ｓ２,通过连续法无皂种子乳液聚合合成了一系列不同ＡＡ或ＭＡＡ（甲基丙烯酸）含量的Ｓｔ、ＭＭＡ三元共聚乳液．将所得复合胶乳进行碱／酸分步处理,得到具有多孔结构的乳胶粒．用透射电镜对胶粒形态进行了表征,考察了不饱和酸种类和用量、碱处理初始ｐＨ值及溶胀剂对胶粒成孔的影响．     

核／壳结构聚丙烯酸酯增韧剂改性PVC的研究

用核／壳结构聚丙烯酸酯增韧剂对ＰＶＣ进行了抗冲击改性，研究了增韧剂的组成结构与增韧效果之间的关系，通过实验发现在本工作所考察的范围内，增韧剂粒径越大，其增韧效果越好．电镜观察证实共混体系的形态为弹性体粒子均匀地分散在ＰＶＣ基体中．     

四元胶乳互穿聚合物网络的组成对其性能的影响

用分步乳液聚合法合成了具有核壳结构的胶乳互穿聚合物网络ＬＩＰＮ（ＰＭＭＡ－ＰＳ）／（Ｐｎ－ＢＡ－ＰＡＡ）；讨论了ＬＩＰＮ组成对乳液与膜性能的影响，提出了四元ＬＩＰＮ核壳结构的基本轮廓，探讨了软硬单体最佳配比及丙烯酸单体用量。     

致孔剂对HP（MA—VAc—MMA）载体孔结构的影响

以二乙烯苯和双丙烯酸多缩乙二醇酯为交联剂、聚醋酸乙烯酯（ＰＶＡｃ）或它与醋酸丁酯（ＢＡＣ）的混合物为致孔剂、ＢＰＯ为引发剂，用悬浮聚合随后水解的方法制得了部分水解聚（丙烯酸甲酯－醋酸乙烯酯－甲基丙烯酸甲酯）［ＨＰ（ＭＡ－ＶＡｃ－ＭＭＡ）］多孔载体，研究了ＰＶＡｃ及（ＰＶＡｃ＋ＢＡＣ）用量、分子量及混合比对ＨＰ（ＭＡ－ＶＡｃ－ＭＭＡ）孔结构的影响。结果表明，当ＰＶＡｃ的Ｍ＞２．５×１０５，ＰＶＡｃ／ＢＡＣ为２．３，用量为１０～２０％时，可制得孔隙率较高，孔径分布较窄，孔表面积较大的多孔载体。这种载体适用于微生物固定化。     

交联剂对无皂P(MMA-EA-MAA)种子聚合乳胶粒成孔的影响

采用完全无皂种子乳液聚合技术合成了粒径窄分布的P(MMA-EA-MAA)乳胶粒,通过对上述胶乳进行碱处理,制备出了具有空腔结构和多孔结构的聚合物乳胶粒,研究了交联剂的种类和用量对聚合过程、胶粒特性及胶粒结构形态的影响.结果表明,体系中加入交联剂后,单体转化率都有不同程度的提高;随交联剂用量的增加,乳胶粒粒径略有减小,交联剂用量较高时,乳胶粒粒径分布加宽;二乙烯基苯(DVB)的交联效率稍高于双甲基丙烯酸乙二醇酯(EGDMA);不加入交联剂及EGDMA用量低于0.5%时,处理后乳胶粒呈空腔结构,加入DVB及EGDMA用量高于1.0%时,处理后乳胶粒呈多孔结构,并且乳胶粒体积增量随交联剂用量的增加而减小.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.