4-羟基苯乙烯基吡啶为HRP底物的酶荧光免疫传感体系测定布氏杆菌抗体

本文合成了一种新型辣根过氧化物酶（HRP）荧光底物—4-羟基苯乙基吡啶（pHSP）,并首次将它运用于酶联荧光免疫传感体系。对pHSP化学性质的研究证实,pHSP在空气中较稳定,对HRP、H2O2的荧光响应性能优于传统HRP荧光底物如对羟苯乙酸、Amplex Red和佳味醇等。pHSP本身只有极弱的荧光,在HRP催化下可被 H2O2氧化成二聚体产物,该二聚体在300 nm的激发光下能发射波长为437 nm的强荧光,并且反应体系的荧光增加与HRP量在一定浓度范围内成线形相关。根据此原理,建立了兔布氏杆菌抗体的酶联荧光传感分析新方法。运用制备的传感装置测定兔布氏杆菌抗体的线形范围为110-5 1.6 10-3 g/L,抗体检出限为110-5 g/L,相对标准偏差为4.1%（n=11）。 pHSP的二聚体产物水溶性很低,利用设计的装置较好地解决了传统测定溶液体系方法灵敏度打折的问题。     

4-羟基苯乙烯基吡啶为辣根过氧化物酶底物的酶荧光免疫传感体系测定布氏杆菌抗体

合成了一种新型辣根过氧化物酶(HRP)荧光底物-4-羟基苯乙基吡啶(pHSP),并首次将它运用于酶联荧光免疫传感体系.对pHSP化学性质的研究证实,pHSP在空气中较稳定,对HRP,H2O2的荧光响应性能优于传统HRP荧光底物,如对羟苯乙酸、Amplex Red和佳昧醇等.在pH 5.8的Britton-Robinson缓冲溶液中,pHSP本身只有极弱的荧光,在HRP-IgG催化下可被H2O2氧化成二聚体产物,该二聚体在300 nm的激发光下能发射波长为437 nm的强荧光,并且反应体系的荧光增加与HRP量在一定浓度范围内成线性相关.根据此原理,建立了兔布氏杆菌抗体的酶联荧光传感分析新方法.运用制备的传感装置测定兔布氏杆菌抗体的线性范围为6.3×10-11～1×10-8mol·L-1,抗体检出限为6.3×10-11mol·L-1,相对标准偏差为4.1%(n=11).pHSP的二聚体产物水溶性很低,利用设计的装置较好地解决了传统测定溶液体系方法灵敏度不高的问题.     

MAP-H2O2-HRP伏安酶联免疫分析新体系的光谱及电化学研究

提出了间氨基酚(MAP)-H2O2-辣根过氧化物酶(HRP)伏安酶联免疫分析新体系.本方法以线性扫描二阶导数伏安法检测HRP催化H2O2氧化MAP的产物,用于游离HRP和各种HRP标记物的测定,灵敏度均高于经典的ELISA显色光度法.测定游离HRP的线性范围为1.0×10-8～1.0×10-6g/L,检测限达3.8×10-9g/L.制备出了HRP催化H2O2氧化MAP的产物纯品,并应用电化学分析,高效液相色谱,元素分析,紫外-可见光谱,红外光谱,1H核磁共振谱,13C核磁共振谱及质谱等技术对体系酶促反应进行了深入的研究.在选择的酶促反应条件下,生成的产物为2-氨基-5-[(3-羟苯基)氨基]-2,5-环己二烯基-1,4-二酮.提出了酶催化反应机理及其产物的电极还原过程.     

基于新型HRP底物白藜芦醇和Ag/SiO_2纳米粒子的酶联荧光免疫传感体系

以一种纯天然产物——白藜芦醇(resveratrol,RST)作为辣根过氧化物酶(HRP)荧光底物运用于酶联荧光免疫传感体系.RST对HRP,H2O2的荧光响应性能优于传统HRP荧光底物,诸如对羟苯丙酸、AmplexRed和佳味醇.RST本身只有极弱的荧光,在HRP催化下可被H2O2氧化成二聚体产物,该二聚体在315nm的激发光下能发射波长为462nm的强荧光,并且反应体系的荧光强度增加值与HRP量在一定浓度范围内成线性相关.根据此关系和竞争型免疫定量原理,以日本血吸虫抗体(SjAb)为模型分析对象,建立了基于新HRP荧光底物的酶联荧光传感分析新方法.运用制备的传感装置测定SjAb的线性范围为1.5×10-6～7.3×10-4g/L,检出限为1.5×10-6g/L,测定浓度为5×10-6g/LSjAb的相对标准偏差为4.7%(n=10).RST的二聚体产物水溶性很低,通过该装置可将酶反应产物沉积在具Ag/SiO2纳米粒子的传感界面上,利用纳米Ag/SiO2对产物吸附富集作用,不仅解决了传统方法不便于测定低水溶性的产物的问题,而且提高了分析灵敏性.     

以邻氨基酚为底物的伏安酶联免疫分析体系酶促反应的研究

辣根过氧化物酶 (HRP)催化H2 O2 氧化邻氨基酚的酶促反应与邻氨基酚的氧化产物的电极还原反应相偶合的伏安酶联免疫分析新体系具有很高的灵敏度 ,测定HRP的检出限为 6 .0× 1 0 -10 g/L ,线性范围为 1 .0× 1 0 -9～ 4.0× 1 0 -6g/L .制备出了HRP催化H2 O2 氧化邻氨基酚的产物纯品 ,并应用电化学分析、高效液相色谱、紫外 可见光谱、红外光谱、13 C核磁共振谱、1H核磁共振谱、质谱、元素分析等技术对体系酶促反应进行了深入的研究 .在所选择的酶促反应条件下 ,生成的产物为 3 氨基吩嗪 .提出了酶促反应及其产物的电极还原过程 .     

基于新型HRP底物白藜芦醇和Ag／SiO2纳米粒子的酶联荧光免疫传感体系

以一种纯天然产物——白藜芦醇（resveratrol,RST）作为辣根过氧化物酶（HRP）荧光底物运用于酶联荧光免疫传感体系．RST对HRP,H2O2的荧光响应性能优于传统HRP荧光底物,诸如对羟苯丙酸、Amplex Red和佳味醇．RST本身只有极弱的荧光,在HRP催化下可被H2O2氧化成二聚体产物,该二聚体在315nm的激发光下能发射波长为462nm的强荧光,并且反应体系的荧光强度增加值与HRP量在一定浓度范围内成线性相关．根据此关系和竞争型免疫定量原理,以日本血吸虫抗体（SjAb）为模型分析对象,建立了基于新HRP荧光底物的酶联荧光传感分析新方法．运用制备的传感装置测定SjAb的线性范围为1．5×10^-6～7．3×10^-4g／L,检出限为1．5×10^-6g／L,测定浓度为5×10^-6g／L SjAb的相对标准偏差为4．7％（n=10）．RST的二聚体产物水溶性很低,通过该装置可将酶反应产物沉积在具Ag／SiO2纳米粒子的传感界面上,利用纳米Ag／SiO2对产物吸附富集作用,不仅解决了传统方法不便于测定低水溶性的产物的问题,而且提高了分析灵敏性．     

用于检测癌胚抗原CEA的丝网印刷免疫传感器

采用溶胶-凝胶技术将电子媒介体亚甲基蓝和辣根过氧化物酶(HRP)标记的癌胚抗原(CEA)固定在一次性丝网印刷碳电极表面,制备了CEA免疫传感器。该免疫传感器在含CEA样品的溶液中培育后,抗原-抗体免疫结合物的形成会阻碍HRP活性中心与亚甲基蓝之间的电子传递,使HRP对H2O2电催化氧化的效率降低。循环伏安和计时电流法用于研究免疫电极的电化学特性,在优化的条件下催化效率的降低与CEA质量浓度分别在1.0~6.0μg/L和6.0~138μg/L范围内成线性关系,检出限为0.4μg/L,测定的组内和组间相对标准偏差分别为7.4%和11.2%。该测定无须分离、洗涤步骤,分析时间短,操作方便,检测成本低,具有实际应用价值。     

基于丝网印刷工艺的安培型酶免疫传感器的研究

研究了一种一次性安培型免疫传感器,检测辣根过氧化物酶(HRP)。用丝网印刷工艺制备三电极结构的传感器,工作电极是碳电极,银电极是伪参比电极。采用电荷传递系数、评估厚膜电极的一致性。通过戊二醛交联法,把抗HRP酶抗体固定在电极表面。加入底物H2O2和电子介体邻苯二胺,分别用安培法和比色法进行检测和比较分析。安培法测定HRP的测量范围10μg/L~10 mg/L,检出限10μg/L;比色法测定范围为2~40 mg/L,检出限2 mg/L。同时分析了湿度对传感器寿命的影响。     

2-氨基-3-羟基吡啶-过氧化氢-辣根过氧化物酶伏安酶联免疫体系分析人血清癌胚抗原

以氮杂环化合物为电化学分析底物的2-氨基-3-羟基吡啶-H2O2-辣根过氧化物酶(HRP)伏安酶联免疫体系测定人血清癌胚抗原(CEA).HRP催化H2O2氧化2-氨基-3-羟基吡啶的酶促反应产物,在缓冲液中-0.36 V处产生一个灵敏的伏安还原峰,借助此峰可以测定游离的HRP,进而可用于以HRP为标记物的酶联免疫分析.对酶促反应条件和测定条件的优化反应条件为:以B-R缓冲液(pH 6.0)为反应介质,在10 mL总反应液中含有1.0 mL 0.2 mol/L B-R缓冲液、3.0 mL 8.0 mmol/L 2-氨基-3-羟基吡啶溶液以及1.5 mL 0.5 mmol/L H2O2溶液,反应温度37 ℃,反应时间30 min.最佳测定条件为:B-R缓冲液(pH 7.0)为支持电解质,在10 mL总测定溶液中含有5 mL上述总反应液、1.0 mL 0.2 mol/L B-R缓冲液.测定仪器条件:起始电位0.00 V,终止电位-0.80 V,电位扫描速度400 mV/s,滴汞静止时间7 s.在最佳的反应条件和测定条件下,新体系测定游离HRP的线性范围为4.0×10-4～1.0 μg/L; 对HRP的检出限为0.12 ng/L.新体系对CEA测定的线性范围为0.50～80.0 μg/L; 检出限为0.50 μg/L.为经典ELISA法的检出限的1/10.     

以OT为底物固体电极伏安法测定辣根过氧化物酶及其标记物的研究

以玻碳电极为工作电极研究了邻联甲苯胺(OT)为底物微分脉冲伏安法测定辣根过氧化物酶(HRP)及其标记物的方法。HRP能够催化H2O2氧化OT,其反应产物在玻碳电极上-0.58V(vs.Ag/AgCl)左右被还原产生一个灵敏的还原峰,还原峰电流随着酶浓度的增大而增大,借助此还原电流可以测定HRP,并进而可用于以HRP为标记物的酶免疫分析。对酶催化反应条件和酶催化反应产物的测定条件进行了详细的研究,在最佳实验条件下测定游离HRP的线性范围是2.0×10-9～4.0×10-8g/mL,检出限为1.6×10-9g/mL;测定游离的酶标记物(IgG HRP),稀释范围为1∶2000～1∶400000,最大稀释比为1∶400000。     

Electroanalytical and chromatographic determination of pentachlorophenol and related molecules in a contaminated soil: a real case example

Electroanalytical and chromatographic methodologies have been applied for the determination of pentachlorophenol (PCP) and some of its derivatives in real soil samples contaminated by industrial discharge. The analytes were extracted with hexane from soil samples collected at different points of the site and mixed to produce a representative sample. Square wave voltammetry (SWV) experiments were carried out on either a boron-doped diamond (BDD) electrode or a gold ultramicroelectrode (Au-UME) in an analyte composed by the Britton-Robinson (B-R) buffer at pH 5.5 with the direct addition of proper amounts of the extract. The voltammetric responses revealed an irreversible anodic peak at approximately 0.80 V vs. Ag/AgCl with a peak current showing a linear dependence on PCP concentration. This linear relationship yielded a detection limit (DL) of 2×10⁻⁸ mol l⁻¹ (or 5.5 μg l⁻¹) for the BDD electrode and 6.9×10⁻⁸ mol l⁻¹ (18.4 μg l⁻¹) for the Au-UME, while the independently measured HPLC detection limit was 1.1×10⁻⁸ mol l⁻¹ (3.0 μg l⁻¹). The application of electroanalytical and chromatographic methodologies in the analysis of soil extracts revealed, besides the PCP responses, signals for some related molecules such as o-tetrachlorobenzoquinone (o-chloranil), hexachlorobenzene and tetrachlorophenol. Recovering experiments for PCP showed a concentration of 27.5 mg kg⁻¹ for the electroanalytical determinations and 26.8 mg kg⁻¹ for the HPLC analysis, values exceedingly high if considering that the maximum residue limit established for natural waters by the Brazilian Environmental Agency is 10 μg l⁻¹.     

毛细管电泳-安培法测定复方磺胺甲噁唑片中的有效成分

采用毛细管电泳-安培法(CE-AD)同时分离测定了磺胺甲噁唑(sulfamethoxazole,SMZ)、磺胺嘧啶(sulfadiazine,SD)和抗菌增效剂甲氧苄胺嘧啶(trimethoprim,TMP)3种常用磺胺类抗菌药物成分,考察了实验参数对分离、检测体系的影响。在优化实验条件下,以300μm碳圆盘电极作为工作电极,检测电位为1050mV(vs.SCE),在Na2B4O7(13mmol/L)-KH2PO4(18mmol/L)(pH5.8)的缓冲溶液中,分离电压18kV,进样6s,3组分在14min内可实现基线分离。上述3组分浓度分别在5×10-4~5×10-2、5×10-4~0.1和5×10-4~5×10-2g/L范围内与其峰电流强度呈线性关系,检出限达5.1×10-5~8.0×10-5g/L(S/N=3)。该方法已成功应用于复方磺胺甲噁唑片中抗菌活性成分的含量测定,结果令人满意。     

Direct electrochemical reduction of hemin in imidazolium-based ionic liquids

The direct electrochemical reduction of hemin, protoporphyrin(IX) iron(III) chloride, ligated with strong or weak heterocyclic bases, was investigated in the ionic liquids (IL), 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF₆]), using cyclic voltammetry and chronocoulometry. Hemin complexed with N-methylimidazole (NMI) or with pyridine had E_1/2 values slightly (4–59 mV) more positive in IL (without electrolyte) than in methanol (1.0 M electrolyte) using a gold electrode. NMI-ligated hemin had a lower E_1/2 than pyridine-ligated hemin in either IL, consistent with the stronger electron donor characteristic of NMI. [Bmim][PF₆] solutions consistently yielded E_1/2 values 30 mV more negative than [omim][PF₆] solutions. The diffusion coefficients D_o of hemin in the IL ranged between 1.50 and 2.80×10⁻⁷ cm² s⁻¹, while the heterogeneous electron-transfer rate constants k_s ranged between 3.7 and 14.3×10⁻³ cm s⁻¹. Cyclic voltammetry of hemin adsorbed to a gold surface through 4,4′-bispyridyl disulfide (AT4) linkages showed a large positive shift in the oxidation wave, indicating that adsorption stabilizes the reduced hemin state. The surface concentration Γ_o of the adsorbed hemin was determined to be 1.21×10⁻¹⁰ mol cm⁻², indicating the presence of one or more complete monolayers of hemin. These findings suggest that while hemin is electrochemically active in IL, its behavior is modified by the ligand field strength and surface adsorption phenomena.     

Evaluation of a chloramine-T-selective electrode for catalytic titration of silver and mercury(II) based on iodide-catalyzed chloramine-T reactions

Semiautomatic methods are described for the catalytic titrimetric determination of microamounts of silver and mercury(II) using a chloramine-T-selective electrode as monitor. The methods are based on the inhibitory effect of Ag(I) and Hg(II) on the iodide-catalyzed chloramine-T-arsenite and chloramine-T-H₂O₂ reactions. Microamounts of silver in the range 0.2–200 μg (1 × 10⁻⁷−1 × 10⁻⁴ M) and of mercury(II) in the range 0.1–200 μg (2.5 × 10⁻⁸−5 × 10⁻⁵ M) were determined using the chloramine-T-As(III) indicator reaction. Mercury(II) in the range 4–2000 μg (1 × 10⁻⁶−5 × 10⁻⁴ M) was also determined using the chloramine-T-H₂O₂ indicator reaction. The accuracy and precision were in the range 0.1–1%.     

Fluorescein labeling of estrogen for application of fluorescence polarization binding assays for antibody and receptor

The fluorescence polarization binding assay (FPBA) using fluorescein-labeled estrogen tracer is a homogeneous assay applicable to both estrogen antibody and estrogen receptor-binding assays. Two estrogen-ethylendiamine fluoresceinthiobamyl (E-EDF) tracers were synthesized; estrogen-6-EDF (E-6-F) derived from 6-ketoestradiol 6-(o-carboxymethyl) oxime and estrogen-17-EDF (E-17-F) was from 17β-estradiol 17-hemisuccinate. In both FPBAs using antibody and receptor, E-6-F tracer (Rf_365nm=0.58) showed a better binding response than E-17-F (Rf_365nm=0.70) indicating that the 17-position of estrogen seems to play an essential role as a binding site for antibody or receptor. In the optimized conditions of FPBA for E₂ using E-6-F tracer, antibody binding (K_d=9.4×10⁻⁹ M) is 50 times sensitive than receptor binding (K_d=4.6×10⁻⁸ M). Binding responses of estrogen and its related chemicals by FPBA indicate that antibody binding assay is able to screen the structural similarity of estrogen showing some response with methyltestosterone (K_i=2.1×10⁻⁵ M). On the other hand, the receptor assay is able to screen for estrogenic chemicals such as tamoxifen (K_i=4.5×10⁻⁹ M) and diethylstilbesterol (K_i=8.1×10⁻⁷ M). Therefore, E-6-F tracer is useful as a tracer for FPBA that is able to screen for chemicals structurally similar to estrogen using antibody, and that is able to screen for chemicals functionally similar to estrogen using receptor binding assay.     

Studies on Intramolecular Charge Transfer Fluorescence Probe and DNA Binding Characteristics

An intramolecular charge transfer fluorescence probe of 4′-N,N-dimethylamino-4-amino-chalcone(DMAC) exhibits characteristics clearly correlated with the polarity of solvents. The interaction of this fluorescence probe with calf thymus DNA has been investigated. Generally, DMAC bound to DNA shows marked changes in fluorescence and absorbance properties compared to the spectral characteristics of the free form in solution phase. In the presence of DNA the fluorescence intensity of DMAC is greatly increased with a large bathochromic shift of excitation and emission wavelengths. A hypochromism in absorption spectrum was also observed. The absorption and fluorescence spectra, salt concentration effect, and KI quenching experiments demonstrate that DMAC molecule as an intercalator is inserted into the base-stacking domain of DNA double helix, and the interaction of the nucleobases with DMAC molecule causes the increase of fluorescence intensity and hypochromism in absorption spectrum. The intrinsic binding constant and the binding site number were estimated to be 7.04 × 10⁶ mol L⁻¹ in base pairs and 0.065, respectively. The I/I₀ vs DNA concentration plot shows a linear range covering 1.98 × 10⁻⁶ to 2.08 × 10⁻⁴ mol L⁻¹ in base pairs which can be used for determining DNA with a detection limit of 6.0 × 10⁻⁷ mol L⁻¹ in base pairs (0.6 μg ml⁻¹).     

Determination of benzhexol hydrochloride by capillary zone electrophoresis with an end-column electrochemiluminescence detection

A capillary zone electrophoresis with end-column electrochemiluminescence (ECL) detector was described for the determination of benzhexol hydrochloride. The detection was based on the tris(2,2′-bypyridine)ruthenium(II) [Ru(bpy)₃²⁺] ECL reaction with the analyte. Electrophoresis was performed using a 25 μm i.d. uncoated capillary. 10 mM sodium phosphate buffer (pH=8.0) was used as the running buffer. The solution in the detection cell was 80 mM sodium phosphate (pH=8.0) and 5 mM Ru(bpy)₃²⁺. A linear calibration curve of three-orders of magnitude was obtained (with a correlation coefficient of >0.999) from 1.0×10⁻⁸ to 1.0×10⁻⁵ M and the limit of detection was 6.7×10⁻⁹ M (S/N=3). This just provides an easy and sensitive method to determine the active ingredient in pharmaceutical formulations.     

TNT determination based on its degradation by immobilized HRP with electrochemical sensor

Based on the mechanism of 2,4,6-Trinitrotoluene (TNT) degradation, an amperometric hydrogen peroxide biosensor was constructed for the determination of trace amounts of TNT by immobilization of MWCNTs, HRP and Nafion onto the surface of glassy carbon electrode (GCE). The Nafion/MWCNTs/HRP biosensor was capable of degrading TNT with the consumption of H₂O₂ and HRP in 0.2 mol/L PBS (pH 7.0). Trace TNT was quantitative analyzed by the current decrease of H₂O₂ at the reductive potential of −0.35 V using cyclic voltammetry (CV). Effect of the ratio of MWCNTs/HRP, initial concentration of H₂O₂ and electrolyte’s pH were also optimized by CV. Under the optimal conditions, the current decrease of H₂O₂ that was consumed by TNT degradation was proportional to TNT ranging from 8.8 × 10⁻⁹ mol/L to 2.64 × 10⁻⁷ mol/L with a detection limit of 3.0 × 10⁻⁹ mol/L (S/N = 3). It developed a new way for simple, rapid and sensitive measurement of trace TNT.     

Palladized aluminum electrode covered by Prussian blue film as an effective transducer for electrocatalytic oxidation and hydrodynamic amperometry of N-acetyl-cysteine and glutathione

The mediated oxidation of N-acetyl cysteine (NAC) and glutathione (GL) at the palladized aluminum electrode modified by Prussian blue film (PB/Pd–Al) is described. The catalytic activity of PB/Pd–Al was explored in terms of Fe^III[Fe^III(CN)₆]/Fe^III[Fe^II(CN)₆]¹⁻ system by taking advantage of the metallic palladium layer inserted between PB film and Al, as an electron-transfer bridge. The best mediated oxidation of NAC and GL on the PB/Pd–Al electrode was achieved in 0.5 M KNO₃ + 0.2 M potassium acetate of pH 2. The mechanism and kinetics of the catalytic oxidation reactions of the both compounds were monitored by cyclic voltammetry and chronoamperometry. The charge transfer-rate limiting step as well as overall oxidation reaction of NAC or GL is found to be a one-electron abstraction. The values of transfer coefficients α, catalytic rate constant k and diffusion coefficient D are 0.5, 3.2 × 10² M⁻¹ s⁻¹ and 2.45 × 10⁻⁵ cm² s⁻¹ for NAC and 0.5, 2.1 × 10² M⁻¹ s⁻¹ and 3.7 × 10⁻⁵ cm² s⁻¹ for GL, respectively. The modifying layers on the Pd–Al substrate have reproducible behavior and a high level of stability in the electrolyte solutions. The modified electrode is exploited for hydrodynamic amperometry of NAC and GL. The amperometric calibration graph is linear in concentration ranges 2 × 10⁻⁶–40 × 10⁻⁶ for NAC and 5 × 10⁻⁷–18 × 10⁻⁶ M for GL and the detection limits are 5.4 × 10⁻⁷ and 4.6 × 10⁻⁷ M, respectively.     

The reduction mechanism of the C=O group. Part 2. The electrochemical reduction of p-diacetylbenzene in aqueous medium

A detailed study of the electrochemical reduction of diacetylbenzene A in aqueous medium between H_o = −5 and pH 14 is presented. The reactants are strongly adsorbed, so that the reactions are of a surface nature. From H_o = −5 to pH 6, a global 2e⁻ reduction yielding an enediol-type intermediate occurs. Analysis using the theory of the square schemes with protonations at equilibrium shows that, up to pH 4, the reaction is controlled by the first electron uptake, the paths being successively H⁺e⁻ and e⁻H⁺. The elementary electrochemical surface rate constants are 9.6 × 10⁷ s⁻ and 1.2 × 10⁶ s⁻ for AH⁺ and A respectively. From pH 6 to 14, a le⁻ adsorption wave, corresponding to the formation of (a) monoradical(s), appears and is followed by a le⁻ wave due to the reduction of the radical(s). A dimerization occurs, due to the coupling A⁻ + AH, as in the case of the monocarbonyl compounds. The rate of this surface process, k_d = 5 × 10¹³ cm² mol⁻¹ s⁻¹, is markedly smaller than the rate of the homogeneous reaction obtained in alkaline ethanol by Savéant et al. for the coupling of the radicals of benzaldehyde, benzophenone and acetophenone.