Stability indicating high-performance thin-layer chromatographic determination of gatifloxacin as bulk drug and from polymeric nanoparticles

A simple, sensitive, selective, precise and stability indicating high-performance thin-layer chromatographic method for determination of gatifloxacin both as a bulk drug and from polymeric nanoparticles was developed and validated as per the International Conference on Harmonization (ICH) guidelines. The method employed thin-layer chromatography (TLC) aluminium plates precoated with silica gel 60F-254 as the stationary phase and the mobile phase consisted of n-propanol-methanol-concentrated ammonia solution (25%) (5:1:0.9, v/v/v). This solvent system was found to give compact spots for gatifloxacin (R_f value of 0.60 ± 0.02). Densitometric analysis of gatifloxacin was carried out in the absorbance mode at 292 nm. The linear regression analysis data for the calibration plots showed good linear relationship with r = 0.9953 with respect to peak area in the concentration range of 400-1200 ng spot⁻¹. The mean value (±S.D.) of slope and intercept were 9.66 ± 0.05 and 956.33 ± 27.67, respectively. The method was validated for precision, accuracy, ruggedness and recovery. The limits of detection and quantitation were 2.73 and 8.27 ng spot⁻¹, respectively. Gatifloxacin was subjected to acid and alkali hydrolysis, oxidation, photodegradation and dry heat treatment. The drug undergoes degradation under acidic and basic conditions and upon wet and dry heat treatment. The degraded products were well separated from the pure drug. The statistical analysis proves that the developed method for quantification of gatifloxacin as bulk drug and from polymeric nanoparticles is reproducible and selective. As the method could effectively separate the drug from its degradation products, it can be employed as stability-indicating one.     

Determination of human IgG by solid-substrate room-temperature phosphorescence immunoassay based on an antibody labeled with nanoparticles containing rhodamine 6G luminescent molecules

Luminescent 50-nm silicon dioxide nanoparticles containing both types of rhodamine 6G (R; particles denoted R-SiO₂) were synthesized by the sol–gel method. In the presence of Pb(Ac)₂ as a heavy atom perturber the particle can emit the intense and stable room-temperature phosphorescence (RTP) signal of R on a polyamide membrane, with _ex^max/_em^max=470/635 nm for R. Our research indicates that the specific immune reaction between goat-anti-human IgG antibody labeled with R-SiO₂ and human IgG can be carried out quantitatively on a polyamide membrane, and the phosphorescence intensity was enhanced after the immunoreaction. Thus a new method for solid-substrate room-temperature phosphorescence immunoassay (SS-RTP-IA) for determination of human IgG was established on the basis of antibody labeled with the nanoparticles containing binary luminescent molecules. The linear range of this method is 0.0624–20.0 pg spot^–1 of human IgG (corresponding to a concentration range of 0.156–50.0 ng mL^–1, sample volume 0.40 L spot^–1). The regression equations of the working curves are I_p=71.27+7.208m_IgG (pg spot^–1) (r=0.9996). Detection limits calculated as 3S_b/k are 0.022 pg spot^–1. Compared with the same IA using fluorescein isothiocyanate (FITC) as the marker the new method was more sensitive and had a wider linear range. After elevenfold replicate measurement RSD are 4.5 and 3.6% for samples containing 0.156 and 50.0 ng mL^–1 IgG, respectively. This method is sensitive, accurate, and of high precision.     

Application of a validated stability-indicating densitometric thin-layer chromatographic method to stress degradation studies on moxifloxacin

A simple, sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic (HPTLC) method for densitometric determination of moxifloxacin both as a bulk drug and from pharmaceutical formulation was developed and validated as per the International Conference on Harmonization (ICH) guidelines. The method employed TLC aluminium plates pre-coated with silica gel 60F-254 as the stationary phase and the mobile phase consisted of n-propanol-ethanol-6 M ammonia solution (4:1:2, v/v/v). Densitometric analysis of moxifloxacin was carried out in the absorbance mode at 298 nm. Compact spots for moxifloxacin were found at R_f value of 0.58 ± 0.02. The linear regression analysis data for the calibration plots showed good linear relationship with r = 0.9925 in the working concentration range of 100-800 ng spot⁻¹. The method was validated for precision, accuracy, ruggedness, robustness, specificity, recovery, limit of detection (LOD) and limit of quantitation (LOQ). The LOD and LOQ were 3.90 and 11.83 ng spot⁻¹, respectively. Drug was subjected to acid and alkali hydrolysis, oxidation, dry heat, wet heat treatment and photodegradation. All the peaks of degradation products were well resolved from the standard drug with significantly different R_f values. Statistical analysis proves that the developed HPTLC method is reproducible and selective. As the method could effectively separate the drug from its degradation products, it can be employed as stability-indicating one. Moreover, the proposed HPTLC method was utilized to investigate the kinetics of the acidic and alkaline degradation processes at different temperatures. Arrhenius plot was constructed and apparent pseudo-first-order rate constant, half-life and activation energy were calculated. In addition the pH-rate profile for degradation of moxifloxacin in constant ionic strength buffer solutions within the pH range 1.2-10.8 was studied.     

Determination of traces of bismuth by quenching of solid-substrate room-temperature phosphorescence from morin-labeled silicon dioxide nano-particles

Silicon dioxide nano-particles, diameter 50 nm, containing morin (morin–SiO₂) have been synthesized by the sol–gel method. They emit strong and stable room-temperature phosphorescence (SS-RTP) on filter paper as substrate, and bismuth can quench the intensity of the SS-RTP. On this basis a new morin–SiO₂ solid-substrate room-temperature phosphorescence-quenching method has been established for determination of traces of bismuth. Reduction of phosphorescence intensity (I_p) is directly proportional to the concentration of bismuth in the working range 0.16–14.4 ag spot^–1 (sample volume 0.40 L spot^–1, corresponding to the concentration range 0.40–36.0 fg mL^–1). The regression equation of the working curve is I_p=14.86+5.279×[Bi³⁺] (ag spot^–1) (n=6, r=0.9982). The detection limit of this method is 0.026 ag spot^–1 (corresponding to a concentration of 6.5×10^–17 g mL^–1).This sensitive, reproducible and accurate method has been used for successful analysis of real samples.     

Stability indicating HPTLC determination of clopidogrel bisulphate as bulk drug and in pharmaceutical dosage form

A sensitive, selective, precise and stability indicating high-performance thin layer chromatographic method of analysis of clopidogrel bisulphate both as a bulk drug and in formulations was developed and validated in pharmaceutical dosage form. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of carbon tetrachloride-chloroform-acetone (6:4:0.15, v/v/v). This system was found to give compact spots for clopidogrel bisulphate (R_f value of 0.30±0.01). Clopidogrel bisulphate was subjected to acid and alkali hydrolysis, oxidation, photodegradation and dry heat treatment. Also the degraded products were well separated from the pure drug. Densitometric analysis of clopidogrel bisulphate was carried out in the absorbance mode at 230 nm. The linear regression data for the calibration plots showed good linear relationship with r²=0.999±0.001 in the concentration range of 200-1000 ng. The mean value of correlation coefficient, slope and intercept were 0.999±0.001, 0.093±0.011 and 8.83±0.99, respectively. The method was validated for precision, accuracy, ruggedness and recovery. The limits of detection and quantitation were 40 and 120 ng per spot, respectively. The drug undergoes degradation under acidic and basic conditions, oxidation and dry heat treatment. All the peaks of degraded product were resolved from the standard drug with significantly different R_f values. This indicates that the drug is susceptible to acid-base hydrolysis, oxidation and dry heat degradation. Statistical analysis proves that the method is reproducible and selective for the estimation of the said drug. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one.     

Dissociation quotients of malonic acid in aqueous sodium chloride media to 100°C

The first and second molal dissociation quotients of malonic acid were measured potentiometrically in a concentration cell fitted with hydrogen electrodes. The hydrogen ion molality of malonic acid/bimalonate solutions was measured relative to a standard aqueous HCl solution from 0 to 100°C over 25° intervals at five ionic strengths ranging from 0.1 to 5.0 molal (NaCl). The molal dissociation quotients and available literature data were treated in the all anionic form by a seven-term equation. This treatment yielded the following thermodynamic quantities for the first acid dissociation equilibrium at 25°C: logK _1a =-2.852±0.003, H _1a ^/o =0.1±0.3 kJ-mol^–1, S _1a ^o =–54.4±1.0 J-mol^–1-K^–1, and C _p,1a ^o =–185±20 J-mol^–1-K^–1. Measurements of the bimalonate/malonate system were made over the same intervals of temperature and ionic strength. A similar regression of the present and previously published equilibrium quotients using a seven-term equation yielded the following values for the second acid dissociation equilibrium at 25°C: logK_2a=–5.697±0.001, H _2a ^o =–5.13±0.11 kJ-mol^–1, S _2a ^o =–126.3±0.4 J-mol^–1-K^–1, and C _p,2a ^o =–250+10 J-mol^–1-K^–1.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Complex formation between nickel(II) and 2-(2-aminoethyl) benzimidazole: A kinetic and equilibrium study

Summary The reversible complex formation between 2-(2-aminoethyl) benzimidazole (AEB) and nickel(II) was studied by stopped flow spectrophotometry at I = 0.30 mol dm^–3. Both the neutral and monoprotonated form of AEB reacted to give the NiAEB²⁺ chelate. At 25 °C, the rates and activation parameters for the reactions Ni_II + AEB NiAEB²⁺ and Ni^II + AEBH⁺ NiAEB²⁺ + H⁺ are k _f ^L(dm^–3 mol^–1 s^–1) = (2.17 ± 0.24) × 10³, H (kJ mol^–1) = 40.0 ± 0.8, S (JK^–1 mol^–1) = – 47 ± 3 and k _inff ^pHL (dm³ mol^–1 s^–1) = 33 ± 10, H (kJ mol^–1) = 42.0 ±2.7, S (JK^–1 mol^–1) = – 72 ± 9. The dissociation of NiAEB²⁺ was acid catalysed and k _obs for this process increased linearly with [H⁺] in the 0.01–0.15 mol dm^–3 (10–30 °C) range with k _H(dm³ mol^–1s^–1) (25 °C) = 329 ± 6, H (kJ mol^–1) = 40 ± 2 and S (JK^–1 mol^–1) = – 61 ± 8. The results also indicated that the formation of NiAEB²⁺ involves a chelation-controlled, rate-limiting process. Analysis of the S ° data for the acid ionisation of AEBH _inf2 ^p2+ and the formation of NiAEB²⁺ showed that the bulky AEBH⁺ ion has a solvent structure breaking effect as compared to AEB [s _aqS ° (AEBH⁺) – s _aq ° (AEB) = 69 JK^–1 mol^–1], while AEBH _inf2 ^p2+ is a solvent ordering ion relative to NiAEB²⁺ [s _aq° (NiAEB²⁺) – ovS _aq ° (AEBH _inf2 ^p2+ ) = 11 JK^–1 mol^–1].Author to whom all correspondence should be directed.     

A new route to the asymmetric Schiff base ligands. The ligand exchange in [Mo(CN)<Subscript>3</Subscript>O(salhy)]<Superscript>2−</Superscript> ion. Kinetics and mechanism

The kinetics of the ligand exchange in (PPh₄)₂[Mo(CN)₃O(salhy)]. 6H₂O (Hsalhy = salicylaldehyde hydrazone) by a solvent molecule and by 2,2-bipyridine (bpy) have been studied in EtOH. For the ligand exchange by a solvent molecule the pseudo-first order rate constant equals k _obs = 3.2 (±0.2) × 10^–3 s^–1 (t=25 °C), H =67 (± 7) kJ mol^–1, S =–75 (±23) J mol^–1 K^–1, while for the exchange by a bpy molecule k _obs=3.5 (±0.2) × 10^–3 s^–1 (t=25 °C), H =56 (±7) KJ mol^–1, S = –104 (±8) J mol^–1 K^–1. It was found, that all reactions proceed via the same mechanism which involves the chelate ring opening cis to the Mo=O bond. The mechanism of the reaction was proposed and was proved by the synthesis of (PPh₄)₂[Mo(CN)₃O(N-pic)]. 2.5H₂O (N-pic denotes that the nitrogen of picolinic acid is trans to Mo=O) by ligand exchange in EtOH, while in aqueous solution the O-pic analogue is formed exclusively.     

Thermochemistry of Amines: Experimental Standard Molar Enthalpies of Formation of N-Alkylated Piperidines

The standard molar enthalpies of formation _f H _m ^° (l) at the temperature T = 298.15 K were determined using combustion calorimetry for N-methylpiperidine (A), N-ethylpiperidine (B), N-propylpiperidine (C), N-butylpiperidine (D), N-cyclopentylpiperidine (E), N-cyclohexylpiperidine (F), and N-phenylpiperidine (G). The standard molar enthalpies of vaporization _l ^g H ^{m °} of these compounds were obtained from the temperature variation of the vapor pressure measured in a flow system. From these data the following standard molar enthalpies of formation in gaseous phase _f H _m ^° (g) were derived for: A –(61.39 ± 0.88); B –(88.1 ± 1.3); C –(105.81 ± 0.66); D –(126.2 ± 1.3); E ( –88.21 ± 0.75); F –(135.21 ± 0.94); G (70.3 ± 1.4) kJ · mol^–1. They are used to determine the strain enthalpies of the cyclic amines A–G. The N-alkylated piperidine rings have been found to be about strainless.     

Quartz Microbalance Microcalorimetry: A new method for studying polymer-solvent thermodynamics

We have developed a sensitive method of determining enthalpy changes for gas-surface interactions: quartz microbalance microcalorimetry. We mount in an isoperibol environment both sample and reference combinations of a quartz crystal microbalance (QCM) in intimate thermal contact with a heat flow sensor. We coat the sample QCM with a thin (1 µm) polymer film. By exposing the film to ethanol vapor, we measure simultaneously the change in mass per unit area (to ±0.25 ng cm^–2) and the resulting heat flows (to ±50 nW) when the polymer adsorbs or desorbs ethanol. The molar enthalpies of sorption of ethanol vapor in Tecoflex, an aliphatic polyurethane elastomer, are _adsorptionH= –53±8 kJ mol^–1 and _desorptionH=52±3 kJ mol^–1.This revised version was published online in November 2005 with corrections to the Cover Date.     

Kinetics and mechanisms of the oxidation of the octacyanoniobate(III)ion by oxyanions in alkaline aqueous media

Summary The kinetics and mechanisms of the oxidation of Nb(CN) _inf8 ^sup5– by the oxyanions S₂O _inf8 ^sup2– , BrO _inf3 ^sup– , and IO _inf4 ^sup– have been investigated in alkaline aqueous media (pH 12). The second-order rate constant for the electron transfer reaction between Nb(CN) _inf8 ^sup5– and S₂O _inf8 ^sup2– at 25.0 °C, I = 0.36m (K⁺), is 11.1± 0.3 m ^–1 s ^–1 with H = 30 ± 2kJmol^–1 and S = - 125 + 7JK^–1 mol^–1. The rate constant for the oxidation of Nb(CN) _inf8 ^sup5– by BrO _inf3 ^sup– at 25.0 °C, I = 0.20m (Na⁺), is 2.39 ± 0.08m ^–1 s ^–1 with H = 28 ± 2kJmol^–1 and S = -139 ± 7JK^–1mol^–1. The oxidation of Nb(CN) _inf8 ^sup5– by IO _inf4 ^sup– proceeds by two parallel pathways involving the monomeric IO _inf4 ^sup– ion and the hydrated dimer H₂I₂O _inf10 ^sup4– . The second-order rate constant for the oxidation of Nb(CN) _inf8 ^sup5– by monomeric IO _inf4 ^sup– at 5.0 °C, I = 0.050m (Na⁺), is (3.3 ± 0.6) × 10³ m ^–1 s ^–1 with H = 75 ± 6 kJ mol^–1 and S = 94 ± 15 J K^–1 mol^–1, while the rate constant for the oxidation by H₂I₂O _inf10 ^sup4– is (1.8 ± 0.1) × 10³ m ^–1 s ^–1 with H = 97 ± 5 kJ mol^–1 and S = 166 ± 16 J K^–1 mol^–1 under the same reaction conditions. The rate constants for each of the oxidants employed display specific cation catalysis with the order of increasing rate constants: Li⁺ < Na+ < NH _inf4 ^sup+ < K⁺ < Rb⁺ < Cs⁺, in the same direction as the electronic polarizability of the cations. The results are discussed in terms of the outer-sphere electron-transfer processes and compared with the corresponding data and mechanisms reported for other metal-cyano reductants.     

An equilibrium and calorimetric investigation of the hydrolysis of L-tryptophan to (indole + pyruvate + ammonia)

Apparent equilibrium constants and calorimetric enthalpies of reaction have been measured for the reaction L-tryptophan(aq) + H₂O(l) = indole(aq) + pyruvate(aq) + ammonia(aq) which is catalyzed by L-tryptophanase. High-pressure liquid-chromatography and microcalorimetery were used to perform these measurements. The equilibrium measurements were performed as a function of pH, temperature, and ionic strength. The results have been interpreted with a chemical equilibrium model to obtain thermodynamic quantities for the reference reaction: L-tryptophan(aq) + H₂O(l) = indole(aq) + pyruvate^–(aq) + NH ₄ ⁺ (aq). At T=25°C and I_m=O the results for this reaction are: K^o=(1.05±0.13)×10^–4, G°=(22.71±0.33) kJ-mol^–1, H°=(62.0±2.3) kJ-mol^–1, and S°=(132±8) J-K^–1-mol^–1. These results have been used together with thermodynamic results from the literature to calculate standard Gibbs energies of formation, standard enthalpies of formation, standard molar entropies, standard molar heat capacities, and standard transformed formation properties for the substances participating in this reaction.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Hydrogenation of the silanone groups (≡Si-O)2Si=0. Experimental and quantum-chemical studies

The reactivity of bis(siloxy)silanone groups (Si-0)₂Si=O stabilized on a silica surface with respect to H₂ molecules was studied. The reaction was found to give the (Si-O)₂SiH(OH) groups. The rate constant for this process was determined. Its activation energy in the 300–580 K temperature range is 13.4±0.3 kcal mol^–1, and the enthalpy is 54±5 kcal mol^–1. The activation energy for the reverse reaction,viz., elimination of a hydrogen molecule, is equal to 65 kcal mol^–1. Quantum-chemical calculations of hydrogenation of F₂Si=O and (HO)₂Si=O, which are the simplest molecular models of the silanone groups, were performed. Data on the geometrical and electronic structures of transition states and on the effects of substituents at the silicon atom on the reactivity of the silanone groups in this process were obtained. The optical absorption band of the surface silanone groups was quantitatively characterized. Its maximum is located at 5.65±0.1 eV; the extinction coefficient at the maximum (220 nm) is (3±0.5) · 10^–18 cm² molec.^–1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1951–1958, August, 1996.     

Liquid chromatographic–electrospray mass spectrometric determination of cyclosporin A in human plasma

A rapid, sensitive and selective liquid chromatography–mass spectrometry (LC–MS) assay has been developed for determination of cyclosporin A (CyA) in human plasma; cyclosporin B (CyB) was used as internal standard (IS). The method utilized a combination of a column-switching valve and a reversed-phase symmetry column. The mobile phase was a 25:75 (v/v) mixture of 10% aqueous glacial acetic acid and acetonitrile. Running time per single run was less than 10 min. Sample preparation included C₈ SPE of human plasma spiked with the analyte and internal standard, evaporation of the eluate to dryness at 50°C under N₂ gas, and finally reconstitution in the mobile phase. Detection of cyclosporin A and the IS was performed in selected ion-monitoring mode at m/z 601.3 and 594.4 Da for CyA and IS, respectively. Quantitation was achieved by use of the regression equation of relative peak area of cyclosporin to IS against concentration of cyclosporin. The method was validated according to FDA guideline requirements. The linearity of the assay in the range 5.0–400.0 ng mL^–1 was verified as characterized by the least-squares regression line Y=(0.00268±1.9×10^–4)X+(0.00078±1.8×10^–3), correlation coefficient, r=0.9986±1.1×10^–3 (n=48). Intra and inter-day quality-control measurements in the range 5.0–350.0 ng mL^–1 revealed almost 100% accuracy and 9% CV for precision. The mean absolute recovery of CyA was found to be 84.01±9.9% and the respective relative recovery was 100.3±9.19. The limit of quantitation (LOQ) achieved was 5 ng mL^–1. Eventually, stability testing of the analyte and IS in plasma or stock solution revealed that both chemicals were very stable when stored for long or short periods of time at room temperature or –20°C.     

Etude des interactions a l'etat solide du nordazepam III-polyoxyethylene glycol 6000 et nordazepam III-acide succinique

We have determined the eutectic composition nordazépam (NDZ) polyoxyethylene glycol 6000 (PEG): 4% NDZ, 96% PEG (T _f =59,0±0,5°C H _f=155,9±2,4 J·g^–1; NDZ succinic acid: 0,32n (NDZ) and 0,68n (succinic acid) (T _f=163,8±0,4°C and H _f=119,34±2,1 J·g^–1). No solid solution has been found. The negative and high absolute value of mixing enthalpy indicates that the eutectic composition is formed by interactions between OH, CO, NH groups of carrier and drug with hydrogene bonds formation, confirmed by X-ray diffraction.

---

Zusammensetzung Folgende eutektische Zusammensetzungen wurden bestimmt: Nordazepam (NDZ) Polyoxyethylenglykol 6000 (PEG): 4% NDZ, 96% PEG (T_f = 59,0±⁰.5°C H_f=155,9±2.4 J·g^–: NDZ Bernsteinsäure: 0,32n (NDZ) und 0,68 n (Bernsteinsäure) (T _f=163,8±0,4°C und H _f= 119,34±2,4 J·g^–1). Es wurden keine Mischkristalle gefunden. Der negative und absolut gesehen grosse Wert der Mischenthalpie zeigt, dass das Eutektikum durch Wechselwirkungen zwischen den OH CO NH Gruppen von Carrier und Droge in Form von Wasserstoffbrückenbindungen gebildet wird, was durch Röntgendiffraktion bestätigt wurde.

     

Complex equilibria of molybdenum(VI) with 2,3-dihydroxynaphthalene

Equilibria of Mo(VI) in acid aqueous solutions with excess of 2,3-dihydroxynaphthalene (DHN)c _DHN /c _Mo = 2.3–107 (I = 0.6 mol 1^–1 (NaClO₄), 0.6% v/v ethanol) were studied spectrophotometrically. Formation constants of MoO₂R ₂ ^2– (logK ₀₁₂ = 5.89±0.01) and presumed MoO₂(OH)(OH₂)R^– (logK ₁₁₁ = 7.79±0.01) chelates were evaluated using SQUAD-G program.     

Kinetics of the thermal and photochemical decomposition of aquapentacyanoferrate(III) in aqueous solution

Summary The kinetics of the thermal and photochemical decomposition of aquapentacyanoferrate(III) ion in aqueous solution in the presence ofo-phenanthroline was studied spectrophotometrically. The first-order rate constant (k ) at 30° C [I=1 M(NaCl)] for the thermal reaction is (1.49±0.13)×10^–6 s^–1 with H =(158±7)kJ mol^–1 and S=(42±4) JK^–1 mol^–1. The initial quantum yield for the photochemical reaction at pH=7 is independent of the light intensity and is (1.49±0.33)×10^–2 mol einstein^–1.A communication on this subject was presented at the XVI Latinamerican Chemistry Congress held at Rio de Janeiro. Brasil, October 14–20, 1984.     

Kinetic Determination of Mercury(II) at Trace Level from Its Catalytic Effect on a Ligand Substitution Process

A catalytic kinetic method (CKM) is presented for the determination of mercury(II) based on its catalytic effect on the rate of substitution of N-methylpyrazinium ion (Mpz⁺) onto hexacyanoferrate(II). The progress of the reaction was monitored spectrophotometrically at 655 nm by registering the increase in absorbance of the product [Fe(CN)₅(Mpz]²⁻ under the reaction conditions: 5 × 10⁻³ mol L⁻¹ [Fe(CN)₆]⁴⁻), 5 × 10⁻⁵ mol L⁻¹ [Mpz⁺], T = 25.0 ± 0.1°C, pH 5.00 ± 0.02 and ionic strength, I = 0.1 mol L⁻¹ (KNO₃). Quantitative rate data at specified experimental conditions showed a linear dependence of the absorbance after fixed time A _t on the concentration of mercury(II) catalyst in the range 20.06–702.1 ng mL⁻¹. The maximum relative standard deviations and percentage errors for the determination of mercury(II) in the range of 20.06–200.6 ng mL⁻¹ were calculated to be 1.7 and 2.7% respectively. The detection limit was found to be 7.2 ng mL⁻¹ of mercury(II). Accuracy (expressed in terms of recoveries) was in the range of 98–103%. Figures of merit and interference due to many cations and anions was investigated and discussed. The applicability of the method was demonstrated by determining the mercury(II) in different synthetic samples and confirming the results using atomic absorption spectrophotometry. The proposed method allowed determination of mercury(II) in the range 20.06–702.1 ng mL⁻¹ with very good selectivity and an output of 30 samples h⁻¹.__________From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 6, 2005, pp. 654–661.Original English Text Copyright © 2005 by Surendra Prasad.This article was submitted by the author in English.     

Kinetics and mechanism of the reaction between bis 4-(2-pyridylazo) resorcinol ferrate(II) complex and cyanide ion

Summary Cyanide ion reacts with [Fe(Par)₂]^2–,i.e. Par=4-(2-pyridylazo)resorcinol to form a 113 mixed cyanocomplex. The reaction has been studied spectrophotometrically at 720 nm _max, pH=11.5±0.02, and I=0.1 M (NaClO₄) at 25±0.1°C. The order with respect to cyanide varies from one to two at high and low cyanide concentrations respectively. The rate constants for respective reactions are k₁=(6.1±0.3)×10^–2 M^–1 s^–1, k₂=(12.6±1.0) M^–2 s^–1. The reverse reaction does not occur at a measurable rate even in presence of a large excess of Par. These observations suggest that [Fe(Par)₂]^2– forms a mixed [FePar(CN)₃]^3– complex in presence of an excess of cyanide ion. The activation parameters for the reaction have been calculated and used to support a three step mechanism consistent with these results. The effect of ionic strength tends further support to the mechanism.     

Determination of Stability Constants of Copper(I) Chelates with 1,10-Phenanthroline by Thermal Lensing

Using investigations of the copper(I)–1,10-phenanthroline system as an example, it is shown that thermal lensing can be used for determining stability constants at a level of concentrations one–two orders of magnitude lower compared to conventional spectrophotometry, with better precision of measurements. The values of stability constants are log₂= 11.7 ± 0.7 without regard for stepwise chelation, and logK ₁= 5.9 ± 0.3, logK ₂= 5.4 ± 0.3, and log₂= 11.3 ± 0.6 taking into account stepwise chelation. It is shown that, when shifting from microgram to nanogram amounts of reactants in the determination of stability constants by thermal lensing, changes in the kinetic parameters of the reaction studied should be taken into account. The thermal-lens limit of detection of copper(I) is 2 × 10^–8M; the linear calibration range is 4 × 10^–8–2 × 10^–5M (488.0 nm, pump power 120 mW). The data obtained were used for determining copper(I) in the hydrogen sulfide layer of the Baltic Sea.