HYDROXYLATION OF n-HEXANE CATALYZED BY SUPPORTED Mn (Ⅲ)—PORPHYRIN COMPLEXES

Water-soluble Mn (Ⅲ)-porphyrins supported on various carriers as monooxygenase—like catalysts were used for n—Hexane hydroxylation by PhIO. The hydroxylation yields and XPS measurement of the catalysts indicate that the carriers containing—OH groups have favorable steric and electronic effect on Mn—porphyrins. Some influencing factors and the role of carriers are discussed.     

SELECTIVE HYDROGENATION OF BENZALDEHYDE TO CYCLOHEXANEMETHANOL CATALYZED BY SILICA－SUPPORTED CARBOXYMETHYL CELLULOSE－PLATINUM COMPLEX

ＳＥＬＥＣＴＩＶＥＨＹＤＲＯＧＥＮＡＴＩＯＮＯＦＢＥＮＺＡＬＤＥＨＹＤＥＴＯＣＹＣＬＯＨＥＸＡＮＥＭＥＴＨＡＮＯＬＣＡＴＡＬＹＺＥＤＢＹＳＩＬＩＣＡ－ＳＵＰＰＯＲＴＥＤＣＡＲＢＯＸＹＭＥＴＨＹＬＣＥＬＬＵＬＯＳＥ－ＰＬＡＴＩＮＵＭＣＯＭＰＬＥＸ￥Ｌｉ...     

CATALYTIC BEHAVIOR OF SILICA-SUPPORTED POLY-γ- AMINOPROPYL- SILOXANE-Co-Ru BIMETALLIC COMPLEX FOR THE HYDROFORMYLATION OF CYCLOHEXENE

The cobalt and ruthenium bimetallic complex of poly-γ-amino-propylsiloxane( abbr. as Si-CH_2-Co-Ru) was prepared, and it was found that it can catalyze the hydroformylation of cyclobexene effectively with the conversion amounting to over 90%. Cyclohexanecarboxaldehyde was first formed in the hydroformylation, and then further hydrogenated to form cylcohexanemethanol. The coversion was affected obviously by the Co/Ru ratio.When Co/Ru molar ratio was 100-150, i.e. in the very low content of noble metal Ru, the catalytic activity of Si-NH_2 -Co-Ru was also very high. The product composition was affected by CO/H_2 ratio in the reaction gas. Aldehyde can be got high selectively by controlling CO/H_2 ratio. Compared with other catalyst system, the Si-NH_2-Co-Ru catalyst has higher catalytic activity and efficiency with very low Ru/Co ratio. The total turnover number was more than 28,800 (based on the amount of ruthenium used).     

TRANSESTERIFICATION OF METHANOL WITH ETHYL ACETATE AND ETHANOL WITH METHYL FORMATE CATALYZED BY DBN

采用三步合成了１，５二氮杂环双环［４，３，０］壬烯５（ＤＢＮ）并考察了其在酯交换反应中的催化活性。结果表明，在没有环氧丙烷（ＰＯ）助剂存在时，ＤＢＮ的催化活性很低；但在有ＰＯ助催化剂存在时，ＤＢＮ对酯交换反应的催化活性极高，其催化活性随ＤＢＮ和ＰＯ浓度的增加而增大。考察了反应温度对ＤＢＮ催化剂的酯交换活性的影响，提出了酯交换反应的催化机理。     

RING-OPENING POLYMERIZATION OF ε-CAPROLACTONE BY LANTHANOCENE CATALYSIS*

Ring-opening polymerization of ε-caprolactone (CL) catalyzed bylanthanocenes, O(C_2H_4C_5H_3CH_3)_2YCl (Cat-YCl) and Me_2Si[(CH_3)_3SiC_5H_3]_2NdCl(Cat-NdCl) has been carried out for the first time. It has been found that both yttroceneand neodymocene are very efficient to catalyze the polymerization of CL, giving high molec-ular weight poly (ε-caprolactone) (PCL ). The effects of [cat] / [ε- CL] molar ratio, polymeriza-tion temperature and time, as well as solvents were investigated and polymerization tem-perature is found to be the most important factor affecting the polymerization. The bulkpolymerization gives higher molecular weight PCL and higher conversion than that in solu-tion polymerization. NaBPh_4 was found to promote the polymerization of ε-caprolactone,and thus to increase both the polymerization conversion and MW of poly (ε- caprolactone ).     

POLYMERIZATION OF γ-STEARYL-α,l-GLUTAMATE N-CARBOXYANHYDRIDE USING RARE EARTH COORDINATION CATALYSTS*

A rare earth coordination system was first investigated as a new type of catalyst for the ring-openingpolymerization of α-amino acid N-carboxyanhydrides (NCAs). The results for the polymerization of γ-stearyl-α,L-glutamate(SLG) NCA using neodymium acetylacetonate (Nd(acac)_3)- or neodymium tris(2-ethylhexylphosphonate) (Nd(P_(204))_3)-triethylaluminum-water as catalysts were compared with those using conventional catalysts. It was found that the helicalpoly(γ-stearyl-L-glutamate) with high molecular weight as well as narrow molecular weight distribution can be obtained inthe presence of Nd(acac)_3/AlEt_3-1/2H_2O. The polymer obtained was characterized by IR and NMR spectroscopy.     

CHARACTERIZATION OF γ-IRRADIATED CRYSTALLINE POLYMERS Ⅱ ISOTHERMAL CRYSTALLIZATION KINETICS OF γ-RADIATION INDUCED CROSSLINKED POLYAMIDE 1010

Polyamide 1010 is a γ-radiation crosslinkable polymer. After irradiation, it is possible to raise its service temperature up to 240℃. Network formation greatly changes the crystallization behaviour of the polymer. In the present work, DSC was used to examine its isothermal crystallization kinetics. It is found that in addition to the necessity of more undercooling and the lowering of crystallization rate, the primary crystallization stage of the irradiated polymer is shortened. This effect is more evident with increasing radiation dose and content of enhanced difunctionai erosslinking agent. However, the crystallization mechanism of the primary stage is not changed as evidenced by the constancy of Avrami exponent. The lamella end surface free energy σ_e calculated according to Hoffman's equation is very sensitive to γ-radiation. It increases abruptly in 2—3 fold even though the radiation dose is not high enough. The origin of this phenomenon may be accounted for in terms of network structure of the polymer.     

SYNTHESIS OF POLYMERIC β-CYCLODEXTRIN SUPPORTED BY CROSSLINKED POLY(ACRYLAMIDE-co-VINYLAMINE)AND ITS CATALYSIS OF THE HYDROLYSIS OF p-NITROPHENYL ACETATE

Polymeric β-cyclodextrin (β-CD) supported by crosslinked poly(acrylamide-co-vinylamine) was synthesized as anartificial analog of hydrolytic enzyme and its catalysis of the hydrolysis of p-nitrophenyl acetate (p-NPA) was theninvestigated. The result showed that the polymer-supported β-CD could accelerate the hydrolytic reaction of p-NPA morequickly than β-CD itself and crosslinked poly(acrylamide-co-vinylamine) alone. The acceleration rate of the polymer-supported β-CD was about 10 times as fast as that of free β-CD in 0.01 mol/L phosphate buffer (pH 7.4) containing 32%DMSO at 37±0.1℃ when the molar amount of β-CD units in the polymer was equal to that of free β-CD in the experiments.The enhanced acceleration of thc polymer-supported β-CD should be ascribed to the cooperative contribution of theinclusion effect of β-CD ring and the nucleophilic effect of amino groups on the polymeric support.     

Comparison of dry reforming of methane in low temperature hybrid plasma-catalytic corona with thermal catalytic reactor over Ni/γ-Al2O3

In the current study,the hybrid effect of a corona discharge and γ-alumina supported Ni catalysts in CO2 reforming of methane is investigated.The study includes both purely catalytic operation in the temperature range of 923-1023K,and hybrid catalytic-plasma operation of DC corona discharge reactor at room temperature and ambient pressure.The effect of feed flow rate,discharge power and Ni/γ-Al2O3 catalysts are studied.When CH4/CO2 ratio in the feed is 1/2,the syngas of low H2/CO ratio at about 0.56 is obtained,which is a potential feedstock for synthesis of liquid hydrocarbons.Although Ni catalyst is only active above 573K,presence of Ni catalysts in the cold corona plasma reactor(T≤523K) shows promising increase in the conversions of methane and carbon dioxide.When Ni catalysts are used in the plasma reaction,H2/CO ratios in the products are slightly modified,selectivity to CO increases whereas fewer by-products such as hydrocarbons and oxygenates are formed.     

Enhanced catalytic performance for direct synthesis of dimethyl ether from syngas over a La2O3 modified Cu-ZrO2/γ-Al2O3 hybrid catalyst

A series of hybrid catalysts were made by physically mixing Cu-ZrO 2 and γ-Al 2 O 3,for former it was modified with different loadings of La 2 O 3 prepared by co-precipitation method.The catalysts were characterized by BET,XRD,N 2 O-adsorption,EXAFS,H 2-TPR,NH 3-TPD techniques and evaluated in the synthesis of dimethyl ether from syngas.The results show that La 2 O 3 promoted catalysts displayed a significantly better catalytic performance compared with Cu-ZrO 2 /γ-Al 2 O 3 catalyst in CO conversion and DME selectivity,and the optimum catalytic activity was obtained when the content of La 2 O 3 was 12 wt%.The characterizations reveal that high copper dispersion,facile reducibility of copper particles and appropriate amount of acidic sites are responsible for the superior catalytic performance.     

Sol-Gel Method for Preparation of LiLaNiO/γ-Al_2O_3 Catalyst over Monoliths used in POM Reaction

Partial oxidation of methane (POM) has several advantages over the traditional industrial method of steam reforming, such as much higher space velocity, reduced capital and operation cost and optimized the ratio of the products (H2/CO). Many investigators are interested in the POM reaction over monolith now1-3. Monolith is a kind of ceramic-like metal oxide material. It has relative high surface to volume ratio compared to commercial pellets, low pressure drop during the reaction process2,…     

SYNTHESIS AND PROPERTIES OF METAL COMPLEXES OF β-DIKETONE BASED SIDE CHAIN LIQUID CRYSTAL POLYSILOXANE

A new type of metal coordinated liquid crystalline polymers has been synthesized by complexation of metal ions with β-diketone based side chain liquid crystal polysiloxane (DKLCP). The complexation of copper ions with DKLCP greatly increases the phase transition temperature T_k from crystalline state to liquid crystalline state and T_(cl) from LC to isotropic state and makes the range of phase transition ΔT (ΔT=T_(cl)-T_k) widened. These complexes are soluble in common organic solvents. However, the incorporation of europium ions into DKLCP molecules gives rise to reduction in liquid crystallinity and crosslinking in some cases. The DKLCP coordinated with suitable amount of Eu ions can show good liquid crystallinity and fluorescent property.     

In situ carbon nanotube synthesis by the reduction of NiO/γ-Al2O3 catalyst in methane

The synthesis of carbon nanotubes (CNTs) via chemical vapour deposition of methane on NiO/γ-Al2O3 catalyst has been investigated. The reduction behavior of NiO/γ-Al2O3 by methane was studied using thermogravimetric (TG) and X-ray diffraction (XRD) techniques. It was found that the NiO supported on γ-Al2O3, was reduced to Ni⁰ in methane atmosphere in the temperature range of 710--770 ℃. The catalytic activity of NiO/γ-Al2O3 for CNTs synthesis by in situ chemical vapour deposition of methane during the reduction was also investigated. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to observe the CNTs produced at various reduction temperatures. The results indicated that the reduction temperature exhibits obvious influence on the morphology and the yield of CNTs. CNTs with the diameter of about 20 nm were obtained at reduction temperature of 750 ℃, and higher reduction temperature (such as 800 and 850 ℃) led to an increase in CNTs diameter and a decrease in CNTs yield.     

沉淀法结合超临界CO2干燥制备纳米γ-Al2O3

纳米γ-Al2O3具备多孔性、高比表面积、良好的吸附性、热稳定性和表面酸性[1,2],用作吸附剂和催化剂(及其载体),是催化剂载体领域应用最为广泛的品种[3～6].制备纳米氧化铝的方法有很多,大致可分为固相法、液相法、气相法等.     

THE EFFECT OF POLAR ADDITIVES ON THE γ RADIATION INDUCED POLYMERIZATION OF STYRENE*

The γ induced polymerization of styrene in the presence of polar additives such as tributylphosphate, triethyl amine and ethanol was studied at dose rate of 5.0×10~(17) eV/ml. min. The re-sult shows that radiation induced polymerization of styrene was sensitized by the three kinds ofadditives at the approximate same rate and the experimental results were in agreement with thetheoretical calculation of WAS equation. The cause of sensitization is due to the proton transfer.     

Fe2(SO4)3/γ-Al2O3固体超强酸的Mössbauer谱研究

采用浸渍法制备了一系列Fe2(SO4)3/ γ-Al2O3型固体超强酸样品,用Moessbauer谱和XRD研究了不同温度处理对样品中铁组分的存在状态及稳定性的影响。结果表明,随Fe2(SO4)3含量的变化,铁组分可以在γ-Al2O3表面以单层分散和无定形形式存在;当温度≥600℃时,无定形状态的Fe2(SO4)3又生成晶态的Fe2(SO4)3,而形成的晶态Fe2(SO4)3即使在700℃时也不分解。     

Comparing the deactivation behaviour of Co/CNT and Co/γ-Al2O3 nano catalysts in Fischer-Tropsch synthesis

An extensive study of Fischer-Tropsch (FT) synthesis on cobalt nano particles supported on γ-alumina and carbon nanotubes (CNTs) catalysts is reported.20 wt% of cobalt is loaded on the supports by impregnation method.The deactivation of the two catalysts was studied at 220 C,2 MPa and 2.7 L/h feed flow rate using a fixed bed micro-reactor.The calcined fresh and used catalysts were characterized extensively and different sources of catalyst deactivation were identified.Formation of cobalt-support mixed oxides in the form of xCoO yAl2O3 and cobalt aluminates formation were the main sources of the Co/γ-Al2O3 catalyst deactivation.However sintering and cluster growth of cobalt nano particles are the main sources of the Co/CNTs catalyst deactivation.In the case of the Co/γ-Al2O3 catalyst,after 720 h on stream of continuous FT synthesis the average cobalt nano particles diameter increased from 15.9 to 18.4 nm,whereas,under the same reaction conditions the average cobalt nano particles diameter of the Co/CNTs increased from 11.2 to 17.8 nm.Although,the initial FT activity of the Co/CNTs was 26% higher than that of the Co/γ-Al2O3,the FT activity over the Co/CNTs after 720 h on stream decreased by 49% and that over the Co/γ-Al2O3 by 32%.For the Co/γ-Al2O3 catalyst 6.7% of total activity loss and for the Co/CNTs catalyst 11.6% of total activity loss cannot be recovered after regeneration of the catalyst at the same conditions of the first regeneration step.It is concluded that using CNTs as cobalt catalyst support is beneficial in carbon utilization as compared to γ-Al2O3 support,but the Co/CNTs catalyst is more susceptible for deactivation.     

Ni2+在γ-Al2O3上的分散状态及负载型Ni/γ-Al2O3催化剂的α-蒎烯加氢活性

用X-射线衍射(XRD)、紫外-可见漫散射光谱(UV-Vis DRS)、程序升温还原(TPR)、CO化学吸附和微反测试等方法研究了Ni²⁺在γ-Al₂O₃上的分散状态和负载型Ni/γ-Al₂O₃催化剂的α-蒎烯加氢催化活性。结果表明，当Ni²⁺负载量远低于其在γ-Al₂O₃载体表面分散容量时，Ni²⁺优先嵌入载体表面四面体空位，随着Ni²⁺负载量的增加，嵌入载体表面八面体空位Ni²⁺的比例增大。由于八面体Ni²⁺易被还原为金属态Ni⁰，NiO/γ-Al₂O₃样品的还原度随Ni²⁺负载量的增加而大幅度地增加，经氢还原所得Ni/γ-Al₂O₃催化剂的CO吸附量和α-蒎烯加氢催化活性大幅度增加。对La₂O₃助剂的作用进行了研究，结果表明分散在γ-Al₂O₃上的La³⁺物种可阻止Ni²⁺嵌入γ-Al₂O₃表面四面体空位，增大了八面体Ni²⁺物种所占比例，提高了催化剂的还原度，故Ni-La₂O₃/γ-Al₂O₃催化剂催化活性高于Ni/γ-Al₂O₃催化剂。     

合成大比表面γ-Mo2N的新方法

The production of high specific surface area γ-Mo₂N (up to 165 m²·g^-1, passivated) by temperature programmed reaction of MoO₃ with mixtures of N₂ and H₂ was reported. The synthetic condition of high surface area γ-Mo₂N (usually, S_BET>100 m²·g^-1) were quite difficult and the amount of starting material MoO₃ in each batch was much less than 0.5 gram. However, some synthetic conditions had been greatly improved in our experiments. The crystalline phase and specific surface area had been characterized by XRD and BET. The XRD gave some information for reaction mechanism.     

等离子体协同CuO/TiO2-γ-Al2O3催化CH4脱除NO

对合成的12%CuO/15%TiO2/γ-Al2O3催化剂进行了BET和XRD表征, 并结合等离子体与催化协同脱除NO的反应装置, 考察了单一等离子体、单一催化剂以及等离子体与催化协同脱除NO+CH4+O2的反应结果, 研究了上述三种条件下NO和CH4的转化率. BET表征结果表明, 15%TiO2/γ-Al2O3的孔径分布在微孔和介孔之间; XRD结果表明, 催化剂表面有CuO晶相; 反应活性数据表明, 单一等离子体存在时, NO和CH4的转化率随着等离子体的输入功率增大而逐渐增加, 反应体系引入体积分数为2.5%的O2气促进了NO和CH4的转化; 使用单一催化剂时, NO和CH4的转化率随温度升高而分别增大至30%和20%. 同时NO转化率随O2气浓度的增加先增加后降低, CH4随O2气浓度的增加转化率逐渐增大; 等离子体与催化剂协同作用NO+CH4+O2反应中, NO和CH4的转化率随O2气浓度的增加与只有催化剂存在条件下的变化趋势一致, 但是增大了NO的低温转化率, 同时CH4的转化率提高到了90%.