Synthesis and Properties of Copolymers Based on Vinyl Chloride

Radical copolymerization of 1-vinylazoles with vinyl chloride and the composition and properties of the resulting copolymers were studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 4, 2005, pp. 647–651.Original Russian Text Copyright © 2005 by Shaglaeva, Lebedeva, Sultangareev, Trofimova.     

Thermal Degradation Behavior of Vinyl Ketone Polymers and Copolymers with Styrene

Thermal degradation behavior of six alkyl vinyl ketone (RVK) polymers and copolymers with styrene was investigated by means of infrared spectrometry (IR), thermogravimetry (TG), derivative TG (DTG), and differential scanning calorimetry (DSC). The observed TG curves of the RVK polymers changed with both structure of their substituents and initiators used, and the temperature of the beginning of weight loss for the radical polymers increased in the order: poly(methyl isopro-penyl ketone) < poly(methyl vinyl ketone) < poly(ethyl vinyl ketone) < poly(isopropyl vinyl ketone) < poly(tert-butyl vinyl ketone). From the infrared spectral determination of thermally degraded polymers, the formation of a cyclized structure was observed. It was also found from the results of thermal degradation of the RVK copolymers with styrene at 210° C that the formation of such a cyclized unit tended to increase in the order: tert-butyl vinyl ketone < isopropyl vinyl ketone < ethyl vinyl ketone < methyl vinyl ketone.     

Novel Highly Unsaturated Macrocyclic and Macrobicyclic Silahydrocarbons Containing Si-H Bonds and Exocyclic Vinyl Groups

The first representative of cycloorganylhydrosilalkynes (C≡CSiHR)_n, tetramethylcyclotetrasilethyne, was prepared by organomagnesium synthesis. The same procedure was used to synthesize 15-membered polyunsaturated silahydrocarbons containing both triple and double bonds in the ring and an exocyclic vinyl group. Organomagnesium synthesis was also used for preparing previously unknown polyunsaturated macrobicyclic silahydrocarbons containing a -CH₂CH₂- bridge. The ¹H, ¹³C, and ²⁹Si NMR and IR spectra of the synthesized compounds were studied.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 7, 2005, pp. 1157–1160.Original Russian Text Copyright © 2005 by O. Yarosh, Zhilitskaya, Istomina, N. Yarosh, Albanov, Voronkov.     

Derivatives of <Emphasis Type="Italic">ortho</Emphasis>- and <Emphasis Type="Italic">para</Emphasis>-Naphthoquinones and Monoethanolamine Vinyl Ether in Radical Copolymerization with Acrylic Acid

Radical copolymerization of new redox monomers based on derivatives of monoethanolamine vinyl ether and naphthoquinones with acrylic acid was studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 1, 2005, pp. 151–154.Original Russian Text Copyright © 2005 by Ergozhin, Mukhitdinova, Shoinbekova, Nikitina, Nuranbaeva, Zhunusova.     

Syntheses of Vinyl Sulfoxide/Vinyl Acetate-Type Copolymers

The homopolymerization of a series of alkyl vinyl sulfoxides (CH₂[dbnd]CHSOR; R = CH₃ (MVSO), C₂H₅ (EVSO), t-C₄H₉ (BVSO)) and their copolymerization with vinyl acetate (VAc) with 2,2′-azobisisobutyronitrile (AIBN) as initiator at 60°C was attempted. MVSO was found to homopolymerize radically, but EVSO and BVSO were not. Poly-MVSO is soluble in chloroform, methanol, DMSO, and water, but insoluble in acetone and benzene. MVSO and EVSO were found to copolymerize with VAc, but BVSO was not. The copolymerization parameters obtained for both systems were as follows; r₁(MVSO) = 2.23, r₂ (VAc) = 0.09, and r₁(EVSO) = 3.40, r₂ (VAc) = 0.11, respectively. MVSO/vinyl alcohol (VA) copolymers were obtained through the saponification of MVSO/VAc copolymers by sodium hydroxide in methanol. The solubility of MVSO/VAc and of MVSO/VA copolymers toward various solvents was examined, and it was observed that the sulfoxide comonomer has a tendency to give amphiphilicit to poly(vinyl acetate) and poly(vinyl alcohol). The 24 mol% MVSO containing VAc copolymer is soluble in both benzene and water.     

Cyclopropanation of Vinyl Sulfides and Vinyl Sulfones

Cyclopropanation of vinyl sulfones and vinyl sulfides can be achieved by phase transfer catalysis where other cyclopropanation methods have failed.     

Vinyl Triflimides—A Case of Assisted Vinyl Cation Formation

A new concept for selectivity control in carbocation‐driven reactions has been identified which allows for the chemo‐, regio‐, and stereoselective addition of nucleophiles to alkynes—assisted vinyl cation formation—enabled by a Li⁺‐based supramolecular framework. Mechanistic analysis of a model complex (Li₂NTf₂⁺?3 H₂O) confirms that solely the formation of a complex between the incoming nucleophile and the transition state of the alkyne protonation is responsible for the resulting selective N addition to the vinyl cation. Into the bargain, a general, operationally simple synthetic procedure to previously inaccessible vinyl triflimides is provided.     

Vinyl Chloride-Vinyl Bromide Copolymers

Abstract

Radical copolymerization kinetics of vinyl chloride (VC) and vinyl bromide (VB) lead to the following reactivity ratios r_VC=0.825 r_VB=1.05 Vinyl bromide acts as a chain transfer agent, more powerful than vinyl chloride, the transfer constant for VC radicals being 8.5 × 10^?3 at 40° C. Neither thermal nor ionic degrad-ation produce controlled distribution of short diene sequences in the copolymer. In the ionic process initiated with LiCl or LiBr in dimethylformamide solution, substitution of halogen atoms as well as acid elimination takes place.     

Vinyl sulfones

Four neutral vinyl sulfones, two of which are paired with phosphonate groups, are described. The compounds are diisopropyl (2‐phenylethenylsulfonylmethyl)phosphonate, C₁₅H₂₃O₅PS, (I), diisopropyl {[2‐(7‐methoxy‐1,3‐benzodioxol‐5‐yl)ethenylsulfonyl]methylsulfonylmethyl}phosphonate, C₁₈H₂₇O₁₀PS₂, (II), bis(trans‐2‐phenylethenyl) sulfone, C₁₆H₁₄O₂S, (III), and bis(trans‐2‐phenylethenylsulfonyl)methane, C₁₇H₁₆O₄S₂, (IV). Their structures can be considered as highly functionalized mimics of mono‐, di‐ and triphosphates. These phosphate isosteres are currently of interest as agents for enzyme inhibition in both cancer and HIV therapy. All except one of the compounds has Z′ > 1. The lone exception is (IV), a disulfone with twofold crystallographic symmetry. Geometrically, the sulfone functionality is found to be a good mimic for phosphate. The principal effect of the vinyl group is to shorten the S—C(vinyl) distance relative to the S—CH₂ distance by ca 0.05 Å. The S—C—S and S—C—P backbones resemble the P—O—P backbone but are not identical because the S—C and P—C distances are longer than the P—O distance and the S—C—S and S—C—P angles are more acute than the P—O—P angle. No prior crystal structures of comparable compounds have been published.     

Gamma-Ray Induced Polymerization of Vinyl Monomers in Bagasse

Vinyl monomers such as vinyl acetate, vinyl chloride, methyl methacrylate and styrene etc., can be polymerized without catalyst into the composites of bagasse material by gamma-radiation induced in situ liquid polymerization process. The fundamental factors, such as polymerization-rate, effect of swelling agent, molecular weight of vinyl polymers and graft reaction between bagasse cellulose and vinyl polymers, have been investigated and discussed. The use of suitable low G-value polar swelling agents and the application of suitable gamma dose-rate are two key factors found to control the smooth in situ liquid polymerization system of vinyl monomers in bagasse.     

Vinyl hydrogen acidities of two stereoisomers

The gas-phase acidities of the vinyl hydrogens of cis- and trans-2-butene were measured by the silane kinetic method in a Fourier-transform ion cyclotron resonance spectrometer. The acidities of ethene and the secondary vinyl hydrogen of propene were measured by the same method. The method was calibrated using the known acidities of methane and benzene. The vinyl hydrogens of trans-2-butene are more acidic than the vinyl hydrogens of cis-2-butene by 4.5 kcal/mol; the acidities of ethene and the secondary vinyl hydrogen of propene are between those of the two butenes. The acidity of cis-2-butene is 409 +/- 2 kcal/mol, and the acidity of trans-2-butene is 405 +/- 2 kcal/mol. Density functional theory calculations are in good agreement with the experiments. The results are discussed in terms of steric interactions, polarizabilities, dipole-dipole interactions, and charge-dipole interactions.     

Preparative Synthesis of Vinyl Diamondoids

We describe a convenient four-step preparation of 1- vinyl adamantane, 1- vinyl diamantane, and 4,9-divinyl diamantane from the respective diamondoid acetic acids in 50–80% isolated yields involving esterification, reduction, and hydrobromination/dehydrobromination.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Asymmetric Claisen Rearrangements on Chiral Vinyl Sulfoxides

Highly diastereoselective Claisen rearrangements of acyclic allyl vinyl ethers bearing a chiral sulfoxide at C‐5 provide γ‐δ‐unsaturated aldehydes or ketones with up to two consecutive asymmetric centers in the molecule whilst preserving a useful vinyl sulfoxide. The reactivity of related vinyl sulfides and sulfones has also been examined in this work.     

Preparation of Vinyl Arenes by Nickel‐Catalyzed Reductive Coupling of Aryl Halides with Vinyl Bromides

This work emphasizes the synthesis of substituted vinyl arenes by reductive coupling of aryl halides with vinyl bromides under mild and easy‐to‐operate nickel‐catalyzed reaction conditions. A broad range of aryl halides, including heteroaromatics, and vinyl bromides were employed to yielding products in moderate to excellent yields with high functional‐group tolerance. The nickel‐catalytic system displays good chemoselectivity between the two C(sp²)‐halide coupling partners, thus demonstrating a mechanistic pathway distinct from other stepwise protocols.     

Fluorine-containing Vinyl Ethers: I. Reactions with Carboxylic Acids

Polyfluoroalkyl vinyl ethers take up aliphatic and aromatic carboxylic acids in the presence of 0.2-5 wt% of trifluoroacetic acid at 55-105°C to give fluorine-containing hemiacetals in 60-100% yields.     

Vinyl Polymerization by Metal Complexes. VII

Abstract

The photopolymerization of vinyl monomers by metal salt-saccharide system was investigated in various solvents. The rate of polymerization in the presence of a iron(III) salt in aqueous media was remarkably accelerated by the addition of saccharides. The acceleration caused by a series of saccharides was found to be in the following order: glucose > fructose > lactose maltose. α-Methyl-d-glucoside and sucrose exhibited very little effect. The overall activation energy for the photopolymerization of acrylonitrile in the presence of glucose was found to be 2.7 kcal/mole, about half of the value obtained in the absence of glucose.     

Enantioselective Organocatalytic Conjugate Addition of Aldehydes to Vinyl Sulfones and Vinyl Phosphonates as Challenging Michael Acceptors

Chiral framework : Chiral amines with pyrrolidine frameworks catalyze the enantioselective conjugate addition of a wide range of aldehydes to various vinyl sulfones and vinyl phosphonates in high yields and with enantioselectivities up to >99 % ee (see scheme). The high versatility of the Michael adducts is exemplified by various functionalizations with conservation of the optical purity.

     

Sulfur-Containing Vinyl Monomers. XV. Kinetic Study of Radical Polymerization of Vinyl Mercaptobenzothiazole and Its Copolymerization

A kinetic study of radical polymerization of vinyl mercaptobenzothiazole (VMBT) with α,α′-azobisisobutyonitrile (AIBN) at 60°C was carried out. The rate of polymerization (R_p) was found to be expressed by the rate equation: R_p = k[AIBN]^0.5 [VMBT]^1.0, indicating that the polymerization of this monomer proceeds via an ordinary radical mechanism. The apparent activation energy for overall polymerization was calculated to be 20.9 kcal/mole. Moreover, this monomer was copolymerized with methyl methacrylate, acrylonitrile, vinyl acetate, phenyl vinyl sulfide, maleic anhydride, and fumaronitrile at 60°C. From the results obtained, the copolymerization parameters were determined and discussed.     

Acyl Iodides in Organic Synthesis: VI. Reactions with Vinyl Ethers

Reactions of acetyl iodide with butyl vinyl ether, 1,2-divinyloxyethane, phenyl vinyl ether, 1,4-di-vinyloxybenzene, and divinyl ether were studied. Vinyl ethers derived from aliphatic alcohols (butyl vinyl ether and 1,2-divinyloxyethane) react with acetyl iodide in a way similar to ethyl vinyl ether, i.e., with cleavage of both O–Csp2 and Alk–O ether bonds. From butyl vinyl ether, a mixture of vinyl iodide, butyl acetate, vinyl acetate, and butyl iodide is formed, while 1,2-divinyloxyethane gives rise to vinyl iodide, vinyl acetate, and 2-iodoethyl acetate. The reaction of acetyl iodide with divinyl ether involves cleavage of only one O–Csp2 bond, yielding vinyl acetate and vinyl iodide. In the reactions of acetyl iodide with phenyl vinyl ether and 1,4-divinyloxybenzene, only the O–CVin bond is cleaved, whereas the O–CAr bond remains intact.