Counterdisproportionation between cationic Ni(II) and phosphine Ni(0) complexes

The interaction of Ni(II) bis-tetrafluoroborate complexes [Ni(Dppe)₂](BF₄)₂ and [Ni(CH₃CN)₆](BF₄)₂ (where Dppe = 1,2-bis(diphenylphosphino)ethane)) with Ni(0) phosphine complexes Ni(Dppe)₂ and Ni(PPh₃)₄ in 1 : 1 mixture of toluene-acetonitrile was studied by the EPR method. The counter-disproportionation was shown to occur in a solution between the cationic Ni(II) complexes and the Ni(0) complexes to give Ni(I) complexes almost in quantitative amounts. The structures of the cationic Ni(I) complexes obtained were found to depend on both the solvent nature and the presence of a free phosphine in a solution.     

Spectroscopic studies on copper(II)triphenylarsine oxide square planar complexes

Electronic and ESR spectra of the complexes [Cu(II)(tpa_so)₄][Cu(I)Cl₂]₂,[Cu(tpa_so)₄](NO₃)₂ and [Cu(tpa_so)₄](ClO     

Bond dissociation energies of ligands in square planar Pd(II) and Pt(II) complexes: An assessment using trans influence

DFT calculations using MPWB1K method with COSMO continuum solvation model have been carried out to quantify the trans influence of various X ligands (E_X) in [Pt^IICl₃X]ⁿ⁻ complexes as well as the mutual trans influence of two X and Y ligands (E_XY) in [Pt^IICl₂XY]ⁿ⁻ complexes. A quantitative structure energy relationship (QSER) is derived for predicting the E_XY using E_X and E_Y and this relationship showed a strong similarity to a QSER derived for predicting E_XY of [Pd^IICl₂XY]ⁿ⁻ complexes. Quantification of the contributions of E_X and E_XY to the bond dissociation energy of the ligand X (BDE_X) in complexes of the type [M^IIX(Y)X′(Y′)] (M = Pd, Pt) is also achieved. The BDE_X of any ligand X in these complexes can be predicted using the equations, viz. BDE_X(Pd) = 1.196E_X − 0.603E_XY − 0.118E_X’Y’ + 0.442D_X + 15.169 for Pd(II) complexes and BDE_X(Pt) = 1.420E_X − 0.741E_XY − 0.125E_X’Y’ + 0.498D_X + 13.852 for Pt(II) complexes, where D_X corresponds to the bond dissociation energy of X in [M^IICl₃X]ⁿ⁻ complexes. These expressions suggest that the mutual trans influence from X and Y is more dominant than the mutual trans influence from X′ and Y′ and both factors contribute significantly to the weakening of M-X bond. We also obtained a strong linear relationship between E_X and the electron density ρ(r) at the bond critical point of M-Cl bond trans to the X in [M^IICl₃X]ⁿ⁻ and this allows us to express the BDE_X(Pd) and BDE_X(Pt) in terms of only the ρ(r) and D_X. We have demonstrated that using a database comprising of D_X and the ρ(r), the bond dissociation energy of X in complexes of the type [M^IIX(Y)X′(Y′)] can be predicted.     

High-spin Ni(II) clusters: triangles and planar tetranuclear complexes

The exploration of the NiX(2)/py(2)CO/Et(3)N (X = F, Cl, Br, I; py(2)CO = di-2-pyridyl ketone; Et(3)N = triethylamine) reaction system led to the tetranuclear [Ni(4)Cl(2){py(2)C(OH)O}(2){py(2)C(OMe)O}(2)(MeOH)(2)]Cl(2)·2Et(2)O (1·2Et(2)O) and [Ni(4)Br(2){py(2)C(OH)O}(2){py(2)C(OMe)O}(2)(MeOH)(2)]Br(2)·2Et(2)O (2·2Et(2)O) and the trinuclear [Ni(3){py(2)C(OMe)O}(4)]I(2)·2.5MeOH (3·2.6MeOH), [Ni(3){py(2)C(OMe)O}(4)](NO(3))(0.65)I(1.35)·2MeOH (4·2MeOH) and [Ni(3){py(2)C(OMe)O}(4)](SiF(6))(0.8)F(0.4)·3.5MeOH (5·3.5MeOH) aggregates. The presence of the intermediate size Cl(-) and Br(-) anions resulted in planar tetranuclear complexes with a dense hexagonal packing of cations and donor atoms (tetramolybdate topology) where the X(-) anions participate in the core acting as bridging ligands. The F(-) and I(-) anions do not favour the above arrangement resulting in triangular complexes with an isosceles topology. The magnetic properties of 1-3 have been studied by variable-temperature dc, variable-temperature and variable-field ac magnetic susceptibility techniques and magnetization measurements. All complexes are high-spin with ground states S = 4 for 1 and 2 and S = 3 for 3.     

金属-血清白蛋白的结构研究II. Cu(II)-BSA和Ni(II)-BSA的四 方锥-四方平面 结构

本文用紫外光谱研究Cu(II)-BSA和Ni(II)-BSA配合物的结构随BSA浓度的变化,发现当浓度增大并>2×10^-^4～3×10^-^4mol.dm^-^3时,这两种配合物从五配位的四方锥构型转变成四配位的四方平面构型,首次提供了BSA的Asp羧基氧参与同Cu(II)和Ni(II)配位的证据。计算并讨论了Cu(II),Ni(II)和有关配体轨道的光学电负性。     

C-F activation of fluorinated arenes using NHC-stabilized nickel(0) complexes: selectivity and mechanistic investigations

The reaction of [Ni2((i)Pr2Im)4(COD)] 1a or [Ni((i)Pr2Im)2(eta(2)-C2H4)] 1b with different fluorinated arenes is reported. These reactions occur with a high chemo- and regioselectivity. In the case of polyfluorinated aromatics of the type C6F5X such as hexafluorobenzene (X = F) octafluorotoluene (X = CF3), trimethyl(pentafluorophenyl)silane (X = SiMe3), or decafluorobiphenyl (X = C6F5) the C-F activation regioselectively takes place at the C-F bond in the para position to the X group to afford the complexes trans-[Ni((i)Pr2Im)2(F)(C6F5)]2, trans-[Ni((i)Pr2Im)2(F)(4-(CF3)C6F4)] 3, trans-[Ni((i)Pr2Im)2(F)(4-(C6F5)C6F4)] 4, and trans-[Ni((i)Pr2Im)2(F)(4-(SiMe3)C6F4)] 5. Complex 5 was structurally characterized by X-ray diffraction. The reaction of 1a with partially fluorinated aromatic substrates C6H(x)F(y) leads to the products of a C-F activation trans-[Ni((i)Pr2Im)2(F)(2-C6FH4)] 7, trans-[Ni((i)Pr2Im)2(F)(3,5-C6F2H3)] 8, trans-[Ni((i)Pr2Im)2(F)(2,3-C6F2H3)] 9a and trans-[Ni((i)Pr2Im)2(F)(2,6-C6F2H3)] 9b, trans-[Ni((i)Pr2Im)2(F)(2,5-C6F2H3)] 10, and trans-[Ni((i)Pr2Im)2(F)(2,3,5,6-C6F4H)] 11. The reaction of 1a with octafluoronaphthalene yields exclusively trans-[Ni((i)Pr2Im)2(F)(1,3,4,5,6,7,8-C10F7)] 6a, the product of an insertion into the C-F bond in the 2-position, whereas for the reaction of 1b with octafluoronaphthalene the two isomers trans-[Ni((i)Pr2Im)2(F)(1,3,4,5,6,7,8-C10F7)] 6a and trans-[Ni((i)Pr2Im)2(F)(2,3,4,5,6,7,8-C10F7)] 6b are formed in a ratio of 11:1. The reaction of 1a or of 1b with pentafluoropyridine at low temperatures affords trans-[Ni((i)Pr2Im)2(F)(4-C5NF4)] 12a as the sole product, whereas the reaction of 1b performed at room temperature leads to the generation of trans-[Ni((i)Pr2Im)2(F)(4-C5NF4)] 12a and trans-[Ni((i)Pr2Im)2(F)(2-C5NF4)] 12b in a ratio of approximately 1:2. The detection of intermediates as well as kinetic studies gives some insight into the mechanistic details for the activation of an aromatic carbon-fluorine bond at the {Ni((i)Pr2Im)2} complex fragment. The intermediates of the reaction of 1b with hexafluorobenzene and octafluoronaphthalene, [Ni((i)Pr2Im)2(eta(2)-C6F6)] 13 and [Ni((i)Pr2Im)2(eta(2)-C10F8)] 14, have been detected in solution. They convert into the C-F activation products. Complex 14 was structurally characterized by X-ray diffraction. The rates for the loss of 14 at different temperatures for the C-F activation of the coordinated naphthalene are first order and the estimated activation enthalpy Delta H(double dagger) for this process was determined to be Delta H(double dagger) = 116 +/- 8 kJ mol(-1) (Delta S(double dagger) = 37 +/- 25 J K(-1) mol(-1)). Furthermore, density functional theory calculations on the reaction of 1a with hexafluorobenzene, octafluoronaphthalene, octafluorotoluene, 1,2,4-trifluorobenzene, and 1,2,3-trifluorobenzene are presented.     

Synthesis and characterization of tetrahedral and square planar Bis(iminopyrrolyl) complexes of cobalt(II)

A series of 2-iminopyrrole ligand precursors with increasing bulkiness [HNC4H3C(R)=N-2,6-R'2C6H3] (R = R' = H, 1a; R = Me, R'= H, 1b; R = H, R' = Me, 1c; R = R' = Me, 1d; R = H, R' = iPr, 1e; R = Me, R' = iPr, 1f) were synthesized and deprotonated with NaH to give the corresponding iminopyrrolyl sodium salts 2a-f. A set of homoleptic bis-ligand Co(II) complexes of the type [Co(kappa2N,N'-NC4H3C(R)=N-2,6-R'2C6H3)2] (R = R'= H, 3a; R = Me, R'= H, 3b; R = H, R' = Me, 3c; R = R' = Me, 3d; R = H, R' = iPr, 3e; R = Me, R' = iPr, 3f) was prepared by reaction of CoCl2 with the corresponding iminopyrrolyl sodium salts 2a-f. The new complexes were characterized by elemental analysis, magnetic susceptibility measurements, in powder and in solution, UV/vis/NIR, and, in some cases, X-ray crystallography. According to X-ray diffraction and magnetic measurements, the Co complexes 3a-e proved to be tetrahedral, which is the preferred geometry for Co(II) compounds. However, a square planar geometry is observed in the case of 3f, as determined by several characterization techniques. In this case, DFT calculations suggest the square planar geometry is slightly more stable than the tetrahedral one probably due to a combination of steric and electronic reasons.     

Metal complexes of some asymmetric diaminodiamide ligands—III1,2: Rates of conversion from octahedral to square planar complexes of Ni(II)

Dissociation of the two amide protons from complexes of asymmetric diaminodiamides with Ni(II) in aqueous solution occurs under moderately basic conditions. The loss of the protons is accompanied by a conversion of the complex from octahedral to square planar. The rates of conversion for complexes NiL²⁺ were measured spectrophotometrically and were found to depend linearly on [OH^?]. The diaminodiamide ligands used were S, R, S- and S, S, S-N, N′-dialanylpropylenediamine (DAPN), S, S-N, N′-dialanylethylenediamine (DAEN), R-N, N′-diglycylpropylenediamine (DGPN), and N, N′-diglycylethylenediamine (DGEN). The rates varied in the order SS-DAEN > DGEN > SRS-DAPN > R-DGPN ≈ SSS-DAPN.     

Dye sensitization of nanocrystalline titanium dioxide with square planar platinum(II) diimine dithiolate complexes

A series of platinum-based sensitizers of the general type Pt(NN)(SS), where NN is 4,4'-dicarboxy-2,2'-bipyridine (dcbpy) or 4,7-dicarboxy-1,10-phenanthroline (dcphen) and SS is ethyl-2-cyano-3,3-dimercaptoacrylate (ecda), quinoxaline-2,3-dithiolate (qdt), 1,2-benzenedithiolate (bdt), or 3,4-toluenedithiolate (tdt), that have various ground-state oxidation potentials has been synthesized and anchored to nanocrystalline titanium dioxide electrodes for light-to-electricity conversion in regenerative photoelectrochemical cells with an I(-)/I(-)(3) acetonitrile electrolyte. The intense mixed-Pt/dithiolate-to-diimine charge-transfer absorption bands in this series could be tuned from 440 to 580 nm by choosing appropriate dithiolate ligands, and the highest occupied molecular orbitals varied by more than 500 mV. Spectrophotometric titration of the Pt(dcphen)(bdt) complex exhibits a ground-state pK(a) value of 3.2 +/- 0.1, which can be assigned to the protonation of the carboxylate group of the dcphen ligand. Binding of Pt(dcbpy)(qdt) to porous nanostructured TiO(2) films was analyzed using the Langmuir adsorption isotherm model, yielding an adsorption equilibrium constant of 4 x 10(5) M(-1). The amount of dye adsorbed at the surface of TiO(2) films was 9.5 x 10(-8) mol/cm(2), which is ca. 50% lower than the full monolayer coverage. The resulting complexes efficiently sensitized TiO(2) over a notably broad spectral range and showed an open-circuit potential of ca. 600 mV with an impressive fill factor of > 0.70, making them attractive candidates for solar energy conversion applications. The visible spectra of the 3,4-toluenedithiol-based sensitizers showed an enhanced red response, but the lower photocurrent efficiency observed for these sensitizers stems in part from a sluggish halide oxidation rate and a fast recombination of injected electrons with the oxidized dye.     

Solvent effects in square planar complexes: Kinetics of substitution at [1-(2-hydroxyphenyl)-3,5-diphenylformazanato]palladium(II) complexes

Summary A kinetic study is reported on the substitutions: FoPdX+YFoPdY+X (H₂Fo=l-(2-hydroxyphenyl)-3,5-diphenylformazan) with X=NH₃ and py and Y = thiourea, tetramethylthiourea, triphenylphosphine and the thiocyanate ion, in seven nonaqueous pure solvents. Under pseudo first-order conditions a two-term rate-law is obeyed: k(obs)= k₁+k₂ [Y]. The results in terms of reactivity pattern and solvent effects on initial and transition states are very similar to the ones found for the analogous substitutions at platinum(II). The rate of solvolysis (k₁) is determined by the donor number of the solvent and is not related to the transfer free energy of solvation of the substrate. Nonspecific solvation effects dominate. The entropy of activation for the direct nucleophilic displacement, FoPdNH₃+Ph₃P, is found to lie between –110 and –20 JK^–1 mol^–1, indicating the associative character of the substitutions. The named reaction exhibits an isokinetic relationship in the various solvents. In spite of that, an initial state — transition state — final state comparison shows the position of the transition state on the reaction coordinate to be solvent dependent. The importance of charge transfer from the donor solvent to the metal ion in determining the Gibbs free energy of the transition state is emphasized.     

Electron spin resonance and electronic spectral investigation on square planar copper(II) complexes ofN-ethyl- andN-propylimidazole

Summary Electron spin resonance studies have been carried out onN-ethylimidazole andN-propylimidazole 4 : 1 complexes of CuX₂ salts (X = ClO ₄ ^– , NO ₃ ^– , , Br^– or Cl^–) in their polycrystalline and undiluted form at 295 K and 77 K. Cupric ion hyperfine structural resolution is observed for all the complexes at 295 K and the spectra are characteristic of a CuN₄ chromophore with axial symmetry. In complexes involving ClO , Br^– and Cl^– the anions are nonbonding, whereas those with the NO ₃ ^– anion are weakly bonding. The electronic and e.s.r. spectral data have been correlated. The resolution of Cu²⁺ ion hyperfine structure in these complexes is attributed to a decrease in the dipolar interaction and has been observed for the first time since the first resolution reported in 1954 for CuN₄ coordination with square planar symmetry for ,,,-tetraphenylporphyrincopper (CuTPP).     

The electrochemistry of square planar macrocyclic nickel complexes and the reaction of Ni(I) with alkyl bromides: Nickel tetraamine complexes

The electrochemistry of nine cyclic tetraamine complexes of Ni(II) in aprotic solvents has been investigated. It is shown that all form Ni(I) complexes which react with alkyl bromides, but only with some complexes are the reactions catalytic with respect to the nickel complex. The dependence of the electrochemical parameters and the mechanism and kinetics of the coupled chemical reactions on the structure of the ligands are discussed.     

Synthesis and characterization of square planar nickel(II)-arylthiolate complexes with the biphenyl-2,2'-dithiolate ligand

Two new NiIIS4 complexes with the biphenyl-2,2'-dithiolate ligand (L) are reported. The dinuclear complex 1, [Ni2L3]2-, was formed in the reaction of 2-3 equiv of Na2L and [NiCl4]2- and the mononuclear complex [NiL2]2- (2) by using 4-10 equiv of Na2L. Complexes 1 and 2 have been crystallographically characterized. (Et4N)2[1].0.5S2Ph2, CH3CN: C60H71N3Ni2S7, triclinic, P1, a = 13.806(2) A, b = 14.267(2) A, c = 16.873(2) A, alpha = 69.263(10) degrees, beta = 69.267(8) degrees, gamma = 83.117(10) degrees, Z = 2, R1 = 0.0752 (wR2 = 0.2011). (Et4N)(Na.CH3CN)[2]: C34H39N2NaNiS4, triclinic, P1, a = 9.9570(10) A, b = 13.2670(10) A, c = 13.9560(10) A, alpha = 108.489(7) degrees, beta = 90.396(6) degrees, gamma = 103.570(4) degrees, Z = 2, R1 = 0.0390 (wR2 = 0.0995). Both complexes are square planar about the nickel ion in the solid state as well as in solution. Most Ni(II)-thiolate complexes are square planar except the tetrahedral mononuclear complexes with monodentate arylthiolate ligands that cannot force a square planar geometry. The ligand (L) has some flexibility to change its bite angle via the phenyl-phenyl bond and should not force a planar geometry on its complexes either. Therefore, it is interesting that 2 has adopted a square planar structure. Complex 2 readily converts to 1 in solution when not in the presence of excess L in a process that is presumably similar to that known for other mononuclear, bidentate ligated Ni(II) complexes. Both complexes, at least in the solid state, appear to have an inclination to bind another metal ion on one face of the complex (Ni2+ in 1, Na+ in 2). We hope to take advantage of this in future work to synthesize relevant model complexes for the active sites of the nickel-iron hydrogenases after suitable modifications are made to L.     

Square planar Ni(II) thiosemicarbazone complexes as functional models for carbon monoxide dehydrogenase

Two Ni(II) complexes, [Ni(dmoTSCH)Cl] (1) and [Ni(dmoPhTSCH)Cl] (2) of the tridentate thiosemicarbazone ligands diacetylmonooxime thiosemicarbazone (dmoTSCH₂) and diacetylmonooxime (4-phenyl)thiosemicarbazone (dmoPhTSCH₂) have been synthesized. X-ray crystal structure of [Ni(dmoTSCPhTSCH)Cl] (2) indicates that the Ni(II) assumes a square planar geometry in the complexes, with the ligand coordinated in a monoanionic N,N,S donor mode and the fourth coordination position of Ni(II) is occupied by a chloride ion. Cyclic and differential pulse voltammetric experiments suggest that the Ni(II) complexes can undergo a two electron reduction at about ?1.0V. It is shown that the Ni(II) complexes in DMF or DMSO solutions can mimic CO-dehydrogenase activity by oxidizing CO to CO₂ in presence of a base like NaOAc and a sacrificial electron acceptor like methyl viologen and the colour of the resultant MV^.+ can be used to monitor the reaction.     

Efficient C-F and C-C activation by a novel N-heterocyclic carbene-nickel(0) complex

The NHC-stabilized complex [Ni2(iPr2Im)4(cod)] (1) was isolated in good yield from the reaction of [Ni(cod)2] with 1,3-diisopropylimidazole-2-ylidene (iPr2Im). Compound 1 is a source of the [Ni(iPr2Im)2] complex fragment in stoichiometric and catalytic transformations. The reactions of 1 with ethylene and CO under atmospheric pressure or with equimolar amounts of diphenylacetylene lead to the compounds [Ni(iPr2Im)2(eta2-C2H4)] (2), [Ni(iPr2Im)2(eta2-C2Ph2)] (3), and [Ni(iPr2Im)2(CO)2] (4) in good yields. In all cases the [Ni(iPr2Im)2] complex fragment is readily transferred without decomposition or fragmentation. In the infrared spectrum of carbonyl complex 4, the CO stretching frequencies are observed at 1847 and 1921 cm(-1), and are significantly shifted to lower wavenumbers compared with other nickel(0) carbonyl complexes of the type [NiL2(CO)2]. Complex 1 activates the C--F bond of hexafluorobenzene very efficiently to give [Ni(iPr2Im)2(F)(C6F5)] (5). Furthermore, [Ni2(iPr2Im)4(cod)] (1) is also an excellent catalyst for the catalytic insertion of diphenylacetylene into the 2,2' bond of biphenylene. The reaction of 1 with equimolar amounts of biphenylene at low temperature leads to [Ni(iPr2Im)2(2,2'-biphenyl)] (6), which is formed by insertion into the strained 2,2' bond. The reaction of diphenylacetylene and biphenylene at 80 degrees C in the presence of 2 mol % of 1 as catalyst yields diphenylphenanthrene quantitatively and is complete within 30 minutes.     

Redox-active ligand-mediated Co–Cl bond-forming reactions at reducing square planar cobalt(III) centers

Synthetic routes to new square planar cobalt complexes with redox-active amidophenolate chelates are presented. Contrary to previous reports, steric bulk on the ligands is not a prerequisite to formation of the low-coordinate materials. X-ray crystal structure metrical data of the neutral S = ½ complexes are most consistent with cobalt(III) bound to one iminobenzoseminonate(1–) radical and one amidophenolate(2–) ligand. Addition of 1e⁻ affords reduced congeners that are also square planar cobalt(III) because the redox-active ligand accepts an electron to generate bis(amidophenolate) species. The redox-activity of the ligands facilitates reactions with chlorine electrophiles to generate square pyramidal products containing new Co–Cl bonds. The bond-forming reactions all formally require oxidation of the metal fragment but there is no change in formal cobalt oxidation state. Instead, the reaction proceeds with oxidation of the amidophenolate ligands. Control of ligand oxidation state provides a mechanism for 1e⁻ versus 2e⁻ selectivity in the bond-forming redox reactions.     

The electrochemistry of square planar macrocyclic nickel complexes and the reaction of Ni(I) with alkyl bromides: Tetradentate Schiff base complexes

The electrochemistry of nine square planar macrocyclic Schiff base complexes of Ni(II) has been investigated in aprotic solvents. It is shown that all form Ni(I) complexes, and with one exception these species may be reacted with alkyl bromides in processes which are catalytic with respect to the nickel complex. The dependence of the electrochemical parameters and the mechanism and kinetics of the coupled chemical reactions on the structure of the ligands is discussed.