Influence of deposition conditions on electrical and mechanical properties of Sm2O3 doped CeO2 thin films prepared by EB-PVD (+IBAD) methods part 2. Indentation hardness and effective elastic modulus

The study of polycrystalline CeO₂ + xSm₂O₃ (x = 0, 10.9–15.9 mol %) thin films deposited by Electron Beam Physical Vapour Deposition (EB-PVD) and Ionic Beam Assisted Deposition (IBAD) techniques on the Si substrate was devoted to the influence of deposition conditions used, namely composition x, deposition temperature T _dep and Ar⁺ ion bombardment, on the (micro)hardness, H _pl and elastic modulus, Y with respect to the film structure and microstructure. These mechanical characteristics were investigated by the depth sensing indentation (DSI) technique as the functions of relative indentation depth h _rel = h _max/t and the values obtained were compared with those obtained by the classical Vickers technique. Results of this study are described and discussed.     

Effect of composition changes on properties and defect structure of crystalline Sm-doped ZrO<Subscript>2</Subscript>

Polymorphous structure, electrical conductivity, absorption coefficient, refractive index, and mechanical characteristics of crystalline system ZrO₂ + x Sm₂O₃ (x = 4–43 mol %) is investigated. Vickers microhardness is investigated by the well-known quasi-static indentation method. Plastic microhardness and the effective elastic modulus are studied by the depth-sensing indentation technique. Special attention is devoted to the ordered defect fluorite structure, pyrochlore phase Sm₂Zr₂O₇, observed for x = 43 mol %. Potential applications of the investigated system are discussed. Published in Russian in Elektrokhimiya, 2007, Vol. 43, No. 4, pp. 402–411. The text was submitted by the authors in English.     

Physicochemical and catalytic properties of systems based on CeO<Subscript>2</Subscript>

The effect of synthesis conditions, the nature of components, and the ratio between the components on the phase composition, the texture, and the redox and catalytic properties of the Ce-Zr-O, Ce-Zr-M₁-O (M₁ = Mn, Ni, Cu, Y, La, Pr, or Nd), N/Ce-Zr-O (N = Rh, Pd, or Pt), and Pd/Ce-Zr-M₂-O/Al₂O₃ (M₂ = Mg, Ca, Sr, Ba, Y, La, Pr, Nd, or Sm) was considered. A cubic solid solution with the fluorite structure was formed on the introduction of <50 mol % zirconium into CeO₂, and the stability of this solid solution depended on preparation procedure and treatment conditions. The presence of transition or rare earth elements in certain concentrations extended the range of compositions with the retained fluorite structure. The texture of the Ce-Zr-O system mainly depended on treatment temperature. An increase in this temperature resulted in a decrease in the specific surface area of the samples. The total pore volume varied over the range of 0.2–0.3 cm³/g and depended on the Ce/Zr ratio. The presence of transition or rare earth elements either increased the specific surface area of the system or made it more stable to thermal treatment. The introduction of the isovalent cation Zr⁴⁺ into CeO₂ increased the number of lattice defects both on the surface and in the bulk to increase the mobility of oxygen and facilitate its diffusion in the Ce_{1 − x} Zr _x O₂ lattice. The catalytic properties of the Ce-Zr-M₁-O or N/Ce-Zr-M₂-O systems were due to the presence of anion vacancies and the easy transitions Ce⁴⁺ ai Ce³⁺, M₁²ⁿ⁺ ai M₁ ⁿ⁺, and N ^δ+ → N ⁰ in the case of noble metals.     

Preparation and radioluminescent characteristics of Li<Subscript>2</Subscript>O-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript>-CaF<Subscript>2</Subscript> glasses doped with Ce(III) and Gd(III)

A method has been developed for the preparation of homogeneous moisture-resistant glasses with the composition Li₂O-B₂O₃-P₂O₅-CaF₂ : Ce³⁺-Gd³⁺. Energy transfer from Gd³⁺ to Ce³⁺ was noted in a study of the radioluminescence spectra of these samples using ²⁴¹Am as the excitation source (60 keV). The decay time of the Ce³⁺ radioluminescence in the glasses obtained was 20-25 ns.     

Electrical conductivity studies in the system Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript>-Li<Subscript>1.33</Subscript>Ti<Subscript>1.67</Subscript>O<Subscript>4</Subscript>

Electrical conductivity in the monoclinic Li₂TiO₃, cubic Li_1.33Ti_1.67O₄, and in their mixture has been studied by impedance spectroscopy in the temperature range 20–730 °C. Li₂TiO₃ shows low lithium ion conductivity, σ₃₀₀≈10^–6 S/cm at 300 °C, whereas Li_1.33Ti_1.67O₄ has 3×10^–8 at 20 °C and 3×10^–4 S/cm at 300 °C. Structural properties are used to discuss the observed conductivity features. The conductivity dependences on temperature in the coordinates of 1000/T versus log_e(σT) are not linear, as the conductivity mechanism changes. Extrinsic and intrinsic conductivity regions are observed. The change in the conductivity mechanism in Li₂TiO₃ at around 500–600 °C is observed and considered as an effect of the first-order phase transition, not reported before. Formation of solid solutions of Li_{2– x} Ti_{1+ x} O₃ above 900 °C significantly increases the conductivity. Irradiation by high-energy (5 MeV) electrons causes defects and the conductivity in Li₂TiO₃ increases exponentially. A dose of 144 MGy yields an increase in conductivity of about 100 times at room temperature. Electronic Publication     

Structure and surface properties of ZrO<Subscript>2</Subscript>, CeO<Subscript>2</Subscript>, and Zr<Subscript>0.5</Subscript>Ce<Subscript>0.5</Subscript>O<Subscript>2</Subscript> prepared by a microemulsion method according to X-ray diffraction,TPR, and EPR data

It was established by X-ray diffraction, TPR, and EPR that microemulsion (m.e.) synthesis yields the binary oxides ZrO₂(m.e.) and CeO₂(m.e.) and the mixed oxide Zr_0.5Ce_0.5O₂(m.e.) in the form of a tetragonal, cubic, and pseudocubic phase, respectively, having crystallite sizes of 5–6 nm. The bond energy of surface oxygen in the (m.e.) samples is lower than in their analogues prepared by pyrolysis. Hydrogen oxidation on the oxides under study occurs at higher temperatures than CO oxidation. ZrO₂(m.e.) and CeO₂(m.e.) are active in O₂⁻ formation during NO + O₂ adsorption, while CeO₂ is active during CO + O₂ adsorption, too. However, its amount here is one-half to one-third its amount in the pyrolysis-prepared samples, signifying a reduced number of active sites, which are Zr⁴⁺ and Ce⁴⁺ coordinatively unsaturated cations and Me⁴⁺-O²⁻ pairs. O₂⁻ radical anions are stabilized in the coordination sphere of Zr⁴⁺ coordinatively unsaturated cations via ionic bonding, and in the sphere of Ce⁴⁺ cations, via covalent bonding. Ionic bonds are stronger than ionic-covalent bonds and do not depend on the ZrO₂ phase composition. Zr_0.5Ce_0.5O₂ is inactive in these reactions because of the strong interaction of Zr and Ce cations. It is suggested that Ce^{(4 + β)+} coordinatively unsaturated cations exist on its surface, and their acid strength is lower than that of Zr⁴⁺ and Ce⁴⁺ cations in ZrO₂ and CeO₂, according to the order ZrO₂ > CeO₂ ≥ Zr_0.5Ce_0.5O₂. Neither TPR nor adsorption of probe molecules revealed Zr cations on the surface of the mixed oxide.     

Study on the oxygen exchange capacities of Ce<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> pyrochlore

Ce₂Sn₂O₇ pyrochlore was synthesized by a hydrothermal method. X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were used to characterize the composition and valence state of the sample. The oxygen exchange property of the Ce₂Sn₂O₇ phase was measured by an oxidation reaction in sealed air atmosphere and a followed reduction reaction in 5% H₂-95% N₂ atmosphere. Gas chromatography (GC) was used to analyze the oxygen change in the reaction. The results show that Ce₂Sn₂O₇ sample has excellent oxygen absorption capacity at 250°C as Ce³⁺ ions are oxidized to Ce⁴⁺ ions. The oxidized sample can be reduced by 5% H₂-95% N₂. The refreshed sample remains the capacity of oxygen absorption, while the oxygen exchange capacity degrades with the reduction times.     

Solid electrolytes based on CeO<Subscript>2</Subscript> for medium-temperature electrochemical devices

CeO₂-based solid solutions with a fluorite structure are promising materials as electrolytes of medium-temperature electrochemical devices: electrolytic cells, oxygen sensors, and solid oxide fuel cells. In this work, studies are presented of the effect of the dopant cation radius and its concentration on the physico-chemical properties of the Ce_{1 − x} Ln _x O_{2 − δ} solid solutions (x = 0–0.20; Ln = La, Nd, Sm, Eu, Gd, Dy, Ho, Er, Yb) and also of multicomponent solid solutions of Ce_{1 − x} Ln _x/2Ln′ _x/2O_{2 − δ} (x = 0–0.20; Ln = Sm, La, Gd and Ln′ = Dy, Nd, Y) and Ce_{1 − x − y} Sm _x M _y O_{2 − δ} (M = Ca, Sr, Ba) obtained using the solid-phase synthesis technique. Electric properties of the samples were studied in the temperature range of 623–1173 K and in the oxygen partial pressure range of 0.01–10⁻²² MPa. The values of oxygen critical pressure ( p_O2 ^* )\left( {p_{O_2 }^* } \right) are presented, at which the ionic and electron conductivity values are equal. The values were calculated on the basis of experimental dependences at 1023 K at the assumption that the ionic conductivity value is determined only by the dopant concentration and its effective ionic radius and is independent of the oxygen partial pressure.     

Cation-anion interactions in [Mo<Subscript>3</Subscript>S<Subscript>7</Subscript>(Et<Subscript>2</Subscript>dtc)<Subscript>3</Subscript>](Et<Subscript>2</Subscript>dtc) solutions

Quantum chemical calculations of the [Mo₃S₇(Et₂dtc)₃](Et₂dtc) complex in different solvents are performed. It is shown that the binding energy between the cluster [Mo₃S₇(Et₂dtc)₃]⁺ cation and the outersphere (Et₂dtc)^? anion exponentially decreases with increase in the solvent dielectric permittivity. By DOSY NMR it is determined that in chloroform, the cationic and anionic moieties of the complex form an associate (contact ion pair), while in strongly polar dimethyl sulfoxide these moieties move independently of one another.     

ESR Study of the Formation of O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> Radical Anions on Oxidized CeO<Subscript>2</Subscript> and CeO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> Adsorbing a CO + O<Subscript>2</Subscript> Mixture

It is demonstrated by ESR measurements that O ₂ ⁻ (CO + O₂) radical anions result from CO + O₂ adsorption on the oxidized surface of CeO₂. These radical anions are stabilized in the coordination sphere of Ce⁴⁺ cations located in isolated and associated anionic vacancies. This reaction shows an activation behavior determined by CO adsorption. The variation of O ₂ ⁻ (CO + O₂) concentration with CO adsorption temperature suggests that surface carbonates and carboxylates participate in this reaction. In the (0.5– 10.0)%CeO₂/ZrO₂ system, O ₂ ⁻ forms on supported CeO₂ and is stabilized on Ce⁴⁺ and Zr⁴⁺ cations. The stability of O ₂ ⁻ -Ce⁴⁺ complexes is lower on supported CeO₂ than on unsupported CeO₂, indicating a strong interaction between the cerium cations and the support.__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 423–429.Original Russian Text Copyright © 2005 by Il’ichev, Kuli-zade, Korchak.     

Photoacoustic and photoluminescence studies on ThO<Subscript>2</Subscript>:Sm<Superscript>3+</Superscript>

Nanocrystalline ThO₂:Sm³⁺ was synthesized using wet-chemical route and characterized using X-ray diffraction (XRD), photoacoustic (PA) and photoluminescence (PL) spectroscopy. PA absorptions of Sm³⁺ doped samples are found to be quite weak as compared to Nd³⁺, while PL of Sm³⁺ was intense. As the energy gap between lowest luminescent levels and highest non-luminescent level in samarium ion is around 7000 cm^?1; it is highly fluorescing compared to Nd³⁺ which has close by levels. Through photoacoustic data it was pointed out that large covalent character exists in ThO₂:Nd³⁺ compared to ThO₂:Sm³⁺.     

Influence of composition on corroding process of Na<Subscript>2</Subscript>O-K<Subscript>2</Subscript>O-CaO-ZrO<Subscript>2</Subscript>-SiO<Subscript>2</Subscript> glasses

The corroding process of six glasses of the Na₂O-K₂O-CaO-ZrO₂-SiO₂ system with ZrO₂content 0–2.13 mass % by water was observed during static tests at 121°C and pressure of 0.25 MPa in steam sterilizer. Significant increase of Na⁺ and K⁺ content in leachates was observed after the addition of ZrO₂ into glass. Further increase of the content of ZrO₂ in glasses slowed down the rate of Na⁺ and K⁺ leaching. The leaching process of SiO₂ as well as Na⁺, K⁺, and Ca²⁺ ions was evaluated on the basis of comparison with model leaching processes. Variation of the concentrations of Na⁺, K⁺, Ca²⁺, and SiO₂ in leachates with time was described by empirical equation. Observed changes in the initial leaching rates of Na⁺, K⁺, Ca²⁺, and SiO₂ can be ascribed to the content of ZrO₂ in glasses. The presence of ZrO₂ in glasses reduced the overall rate of glass dissolution.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.     

Ion state of atoms and the properties of perovskite-like compound CaCu<Subscript>3</Subscript>V<Subscript>4</Subscript>O<Subscript>12</Subscript>

The binding energies and valence state of atoms in the perovskite-like compound CaCu₃V₄O₁₂ have been determined using XPS spectroscopy. The stoichiometry of this phase is formulated as Ca²⁺Cu²⁺Cu ₂ ⁺ (V ₂ ⁵⁺ V ₂ ⁴⁺ O₁₂). Under an air atmosphere, the phase interacts with water vapor and oxygen. As a result, Ca(OH)₂ is formed on its surface, the Cu⁺ and V⁴⁺ ion concentrations decrease, and the Cu²⁺ and V⁵⁺ concentrations increase in association. Raman spectra show shortened cation-anion bond lengths and cation-anion-cation bond angles in CaCu₃V₄O₁₂ compared to perovskite CuVO₃; the two structures are alike. The electrical conductivity, magnetic susceptibility, thermal and sensor properties of CaCu₃V₄O₁₂ in aqueous salt solutions have been studied.     

Conductivity of molten LiF-ZrF<Subscript>4</Subscript>, NaF-ZrF<Subscript>4</Subscript>, KF-ZrF<Subscript>4</Subscript>, RbF-ZrF<Subscript>4</Subscript>, and CsF-ZrF<Subscript>4</Subscript> systems

Specific conductivity of molten salt mixtures of the LiF-ZrF₄, NaF-ZrF₄, KF-ZrF₄, RbF-ZrF₄, and CsF-ZrF₄ systems is measured in the whole concentration range using the reference capillary technique. The results are presented in the form of equations of the χ = a + bT + cT ² [S m^?1] type. The concentration dependences of molar conductivity are calculated on the basis of the density data. The obtained regularities are explained in the terms of the complex model of ion melt structures.     

Composition and structure of solid solutions in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>-V<Stack><Subscript>2</Subscript><Superscript>5+</Superscript></Stack>O<Subscript>5</Subscript> system with the structure sillenite

In the Bi₂O₃-SiO₂-V₂⁵⁺+O₅ system, single crystal solid solutions of the sillenite family of the general composition Bi₂₄(Bi,Si,V)₂O₄₀ are obtained by a hydrothermal method and for the first time characterized by neutron and X-ray diffraction analysis. The tetrahedral position is found to contain vanadium ions with different formal charges (V⁴⁺ and V⁵⁺) responsible for green and orange colors, respectively, of the samples. For the first time, for some sillenites of this system dissymmetrization of the structure (a transition from the I23 space group into P23) is revealed, which is caused by the presence of several atoms in one crystallographic position and also by crystal growth conditions.     

Hydrothermal synthesis of core-shell structured PS@GdPO<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript>/Ce<Superscript>3+</Superscript> spherical particles and their luminescence properties

Non-aggregated spherical polystyrene (PS) particles were coated with GdPO₄:Tb³⁺/Ce³⁺ phosphor layers by a conventional hydrothermal synthesis using poly(vinylpyrrolidone) (PVP) as an additive without further annealing treatment. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), photoluminescence (PL), as well as luminescence decay experiments were used to characterise the resulting core-shell structured PS@GdPO₄:Tb³⁺/Ce³⁺ samples. The results of XRD indicated that the PS particles were successfully coated with the GdPO₄:Tb³⁺/Ce³⁺ phosphor layers, which could be further verified by the images of FESEM. Under ultraviolet excitation, the PS@GdPO₄:Tb³⁺/Ce³⁺ phosphors show Tb³⁺ characteristic emission, i.e. ⁵D₄-⁷F_J (J = {6, 5, 4, 3}) emission lines with green emission ⁵D₄-⁷F₅ (543 nm) as the most prominent group. The core-shell phosphors so obtained have potential applications in field emission display (FED) and plasma display panels (PDP).     

Master sintering curve for Gd-doped CeO<Subscript>2</Subscript> solid electrolytes

The sintering behavior of gadolinia-doped ceria powders was studied by the master sintering curve (MSC). Dilatometric analyses of powders produced by a soft chemical method were performed to provide the experimental data set for the construction of the MSC. The assumed model provided good fittings of the MSC and the activation energy for the sintering of Ce_1−x Gd _x O_3−δ, with x = 0, 0.05, 0.1, and 0.2 were found to be in the 218–325 KJ/mol range, depending on the dopant content. The results supported that both the nanometric size of the particles and the difference in ionic radii between Gd³⁺ and Ce⁴⁺ affects the sintering of Gd-doped CeO₂.     

Conductivity and thermal expansion of the Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>1.9</Subscript> solid electrolyte in the oxidizing and reducing atmospheres

Highly compact (99%) solid electrolyte Ce_0.8Gd_0.2O_1.9 with submicron (0.3 μm) grains is synthesized. The dilatometric (20–850°C) and conductivity (180–350°C) measurements are performed on the electrolyte in air and as a function of the partial oxygen pressure \(p_{O_2 } \) (0.21?1×10^?25 atm) at 600, 700, and 800°C. An inflection is found in the temperature dependences of the thermal coefficient of linear expansion and conductivity (impedance measurements) at ～230°C, which is the evidence for a phase transition. The activation energies for conduction in the grain bulk and boundaries differ only slightly, indicating that the grain boundaries’ resistance is caused not by the precipitation of the second phase at the boundaries, but most probably by the presence of intergranular nanopores. The dilatometric measurements confirm a significant increase in the linear dimensions of Ce_0.8Gd_0.2O_1.9 in the reducing atmospheres with a parallel increase in its electron conductivity. The electron conductivity and specific elongation increase proportionally to \(p_{O_2 }^{ - 1/4} \) at all temperatures. The \(p_{O_2 } \) values, at which the transport numbers of ions t _i = 0.5, are determined. They are 10^?22.5, 10^?20, and 10^?18 atm at 600, 700, and 800°C, respectively.     

Silicate complexation of NpO<Subscript>2</Subscript><Superscript>+</Superscript> ion in perchlorate media

Complexation behavior of NpO₂ ⁺ with ortho-silicic acid (o-SA) has been studied using solvent extraction at ionic strengths varying from 0.10 to 1.00M (NaClO₄) at pcH 3.68±0.08 and 25 °C with bis-(2-ethylhexyl) phosphoric acid (HDEHP) as the extractant. The stability constant value (log β₁) for the 1:1 complex, NpO₂(OSi(OH)₃), was found to decrease with increase in ionic strength of the aqueous phase [6.83±0.01 at I=0.10M to 6.51±0.02 at I = 1.00M]. These values have been fitted in the SIT model expression and compared with similar values of complexation of the metal ions Am³⁺, Eu³⁺, UO₂ ²⁺, PuO₂ ²⁺, Np⁴⁺, Ni²⁺ and Co²⁺. The speciation of NpO₂ ⁺-o-silicate/carbonate system has been calculated as a function of pcH under ground water conditions. On leave from Radiochemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai-400 085, India.