含有长烷氧链混合醚一酯类苯并菲盘状液晶的合成及其介晶性研究

本文合成了含有不同柔链的对称和非对称苯并菲盘状液晶：sym-C18H6（OC11H23），（02CR）3和nsym-C18H6（OCIIH23）3（02CR）3，R=（CH20C2H5），CH20C3H7，CH20C4H9，CH20C5H11,C3H7，C4H9，C5Hll,C6H13，C7H15。通过偏光显微镜（POM）和差视扫描量热法（DSC）对它们的热致液晶性性进行了研究，结果显示：非对称性化合物比它们相应的对称性化合物有更高的熔点和清亮点。对于同一系列的化合物G18H6（OC11H23），（OOCR）3随取代基R的增长，其熔点下降，清高点反而升高。无论对称和非对称苯并菲衍生物G18H6（OC18H23）3（02CR）3，（R=CH20C2H5，CH20C3H7，CH20C4H9，CH20C5H11），与有同样软链长度的苯并菲衍生物G18H5（OC11H23）3（O2CR）3，（R=C4H9，CK5H11,C6H13C，H15）相比较，大都有更高的熔点和清亮点。另外，有足够长度软链的苯并菲衍生物在室温下就显示介晶相。     

含有长烷氧链混合醚-酯类苯并菲盘状液晶的合成及其介晶性研究

本文合成了含有不同柔链的对称和非对称苯并菲盘状液晶:sym-C18H6(OC11H23)3(O2CR)3和asym-C18H6(OC11H23)3(O2CR)3,R=(CH2OC2H5),CH2OC3H7,CH2OC4H9,CH2OC5H11,C3H7,C4H9,C5H11,C6H13,C7H15。通过偏光显微镜(POM)和差视扫描量热法(DSC)对它们的热致液晶性性进行了研究,结果显示:非对称性化合物比它们相应的对称性化合物有更高的熔点和清亮点。对于同一系列的化合物G18H6(OC11H23)3(OOCR)3,随取代基R的增长,其熔点下降,清高点反而升高。无论对称和非对称苯并菲衍生物G18H6(OC11H23)3(O2CR)3,(R=CH2OC2H5,CH2OC3H7,CH2OC4H9,CH2OC5H11),与有同样软链长度的苯并菲衍生物G18H6(OC11H23)3(O2CR)3,(R=C4H9,CK5H11,C6H13,C7H15)相比较,大都有更高的熔点和清亮点。另外,有足够长度软链的苯并菲衍生物在室温下就显示介晶相。     

二乙炔桥连苯并菲盘状液晶二聚体的合成及其介晶性

通过桥链将2个盘状介晶基元相连,不仅可以稳定盘状液晶柱状相,还有利于玻璃态柱状相的形成,提高盘状液晶作为有机半导体材料的实用性．为此,通过铜盐催化的Eglinton偶联反应合成了8个二乙炔桥连的苯并菲盘状液晶二聚体化合物[C18H6（OCnH2n＋1）4（OMe）O2C—C8H16-C--C-]2,3（n）,（n=4-8）,[C18H6（OC6H13）5O2C—C8H16-C-C-]2,（6）和[C18H6（oc6H13）5O-（CH2）m-C-=C-]2,8（m）,（m=1,3）．差示扫描量热法（DSC）和热台偏光显微镜（POM）对其介晶性进行研究发现：（1）苯并菲周边柔链长度对液晶二聚体化合物的介品性有影响;（2）二聚体化合物3（n）和6具有玻璃态柱状相,并且所有苯并菲二聚体化合物在降温至-50℃均未出现结晶现象;（3）与二聚体3（6）相比,分子对称性较高的化合物6具有较稳定的柱状相,及较宽的介晶温度范围;（4）连接基、中心桥链的长度和刚性对苯并菲盘状液晶二聚体介晶性有重要影响．     

含氟链不对称苯并菲盘状液晶的合成及疏氟效应对介晶性的影响

盘状液晶分子中引入氟代烃链并利用疏氟效应（fluorophobic effect）能有效稳定分子的柱状堆积;低对称性的盘状分子有较低的熔点和宽的介晶相温度范围．基于此,本文设计并合成了一系列半氟酯链的不对称苯并菲化合物C18H6（OCnH2n＋1）4（OCH3）（O2CC2H4C6F13）（1）,及相对应的不含氟化合物C18H6（OCnH2n＋1）4（OCH3）（O2CC8H17）（2）,n=4—8．化合物结构通过核磁和质谱表征．介晶性通过差示扫描量热法和偏光显微镜进行了研究．结果显示：化合物均为柱状互变热致液晶．含氟链化合物1a—1e与相对应的化合物2a-2e比较,有更高的熔点和清亮点．合成的多数化合物为室温液晶．     

不对称苯并菲盘状液晶的合成及取代基对介晶性的影响

合成了一系列新型含间位二硝基苯甲酸酯不对称苯并菲盘状液晶化合物2-(3,5-二硝基苯甲酰氧基)-3,6,7,10,11-五烷氧基苯并菲(3a～3f). 通过偏光显微镜(POM)和差示扫描量热计(DSC)对其介晶性进行了研究. 结果显示: 此类化合物有高的清亮点, 稳定的六方柱状相以及较宽的介晶相范围, 且随着软链碳原子数的增加, 化合物的熔点和清亮点均出现下降趋势, 但六方柱状相的有序性却没有发生很明显的变化. 同时通过与其它三类苯并菲盘状液晶2-苯甲酰氧基-3,6,7,10,11-五烷氧基苯并菲(4a～4f), 2-二茂铁甲酰氧基-3,6,7,10,11-五烷氧基苯并菲(5a～5f), 2,3,6,7,10,11-六烷氧基苯并菲(6a～6f)的对比研究, 探讨了酯基, 强吸电子基团, 以及取代官能团体积对介晶性的影响. 证实了苯并菲化合物中分子结构小的变化将引起介晶性大的改变.     

苯并菲衍生物的电荷传输性质

使用密度泛函理论在B3LYP/6-31G**理论水平计算7个含6条烷氧基链的苯并菲衍生物分子的电荷传输速率。结果显示,引入手性C2H5CH(CH3)CH2O链和OC3H6CH=CH2、OC3H6C≡CH、OC2H4OCH CH2不饱和链的苯并菲分子,将通过改变电荷传输矩阵元来影响电荷传输性能。含2-甲基丁氧基手性基团的苯并菲衍生物,甲基同向堆积方式的空穴或电子传输速率最大。7个分子中空穴和电子传输速率最大值分别为5.58×10-2和4.55×10-2cm2·v-1·s-1。     

含有酯基及酰胺基柔链的苯并菲盘状液晶的合成、分子间氢键对柱状介晶性的影响

合成了三个系列, 共二十四个有两种不同软链的对称和非对称苯并菲盘状液晶化合物, C₁₈H₆(OR)₃- (OCH₂COOEt)₃, C₁₈H₆(OR)₃(OCH₂COOBu)₃, C₁₈H₆(OR)₃(OCH₂CONHBu)₃, 其中R＝C₅H₁₁, C₆H₁₃, C₇H₁₅, C₈H₁₇. 化合物通过柱层析纯化, 结构通过¹H NMR, IR, 元素分析等确证. 化合物热稳定性通过TGA测定, 并显示出较高的热稳定性. 通过偏光显微镜和差视扫描量热法对这些化合物的热致液晶性进行了研究. 结果显示: 对于苯并菲液晶化合物C₁₈H₆(OR)₃(OCH₂COOEt)₃, 非对称性化合物较之对称异构体化合物有更低的熔点和更高的清亮点, 因而非对称性化合物有更宽的介晶温度范围. 对于分子中含有酰胺基的苯并菲液晶化合物C₁₈H₆(OR)₃(OCH₂CONHBu)₃, 对称化合物有比非对称异构体更高的清亮点和更有序的六方柱状介晶相, 且其与具有同样软链长度的分子中不含酰胺基的化合物系列C₁₈H₆(OR)₃(OCH₂COOBu)₃相比较, 由于柱内分子间氢键的形成, 不仅有更高的熔点和清亮点, 而且有更丰富的柱状介晶相.     

氢键稳定的苯并菲盘状液晶的合成及介晶性

盘状液晶分子能自组装成高度有序的六方柱状介晶相. 其各向异性的载流子高速迁移率使其成为较理想的有机光电子材料. 采用分子间氢键锚定柱状相, 获得介晶相温度范围宽、有序度高的苯并菲盘状液晶是本研究的目的. 本文通过分子设计, 合成了3个系列, 共18个有两种不同软链的苯并菲盘状液晶化合物C₁₈H₆(OR)₅(OCH₂COOEt), C₁₈H₆(OR)₅(OCH₂COOBu)和C₁₈H₆(OR)₅(OCH₂CONHBu), 其中R＝C_nH_2n＋1, n＝4～9. 化合物的纯度和结构通过¹H NMR和元素分析确证. 化合物热稳定性通过热重分析(TGA)测定, 并显示出较高的热稳定性. 通过偏光显微镜(POM)和差示扫描量热法(DSC)对这些化合物的热致液晶性进行了研究. 结果显示对于分子中含有酰胺基的苯并菲液晶化合物C₁₈H₆(OR)₅(OCH₂CONHBu), 与具有同样软链长度的分子中不含酰胺键的化合物系列C₁₈H₆(OR)₅(OCH₂COOBu)相比较, 前者由于柱内分子间氢键的形成, 具有更高的熔点和清亮点.     

丙基联苯酯型液晶的合成:不饱和端基及氧原子对介晶性的影响

本文以对溴苯甲醚为原料制备成格氏试剂,与4-丙基环己酮亲核加成,脱水,Pd/C催化脱氢芳基化,L iPPh2脱甲基得到了4-正丙基-4’-羟基联苯。该联苯与酰氯酯化反应合成了系列丙基联苯酯类液晶化合物C3H7-C6H4-C6H4-OC(O)R。通过差示扫描量热法和热台偏光显微镜对其介晶性研究发现,当R=CnH2n 1(n=3,4)时,化合物无液晶性;但n=5-7、10,C8H16CH=CH2,C8H16C≡CH时,化合物具有SA相;当R=CH2OCmH2m 1(m=2-5),CH2OCH2CH2OCH3时,化合物呈有序度较较高的SB相。这类化合物的液晶相较窄,多在25℃-100℃范围内。TGA测试的化合物热分解温度都高于200℃。     

苯丙炔酸和苯丙烯酸酯苯并菲盘状液晶的合成及介晶性

合成了7个含苯丙炔酸和苯丙烯酸酯链的苯并菲盘状液晶化合物C₁₈H₆(OC_nH_2n＋1)₅O₂CR' [R'＝C≡CC₆H₅, n＝4～9 (1a～1f); R'＝CH＝CHC₆H₅, n＝6 (1g)]. 该系列化合物结构通过¹H NMR, IR和元素分析表征. 液晶性通过差示扫描量热法和偏光显微镜进行了研究, 结果显示: 化合物均为六方柱状相热致型液晶; 含苯丙炔酸酯链苯并菲盘状液晶化合物1a～1f, 随着烷氧链的增长, 清亮点呈现逐渐下降的趋势; 对于含苯丙烯酸酯链苯并菲化合物1g与具有同样软链长度的炔基酯链苯并菲化合物1c比较, 具有更低的熔点和结晶点, 而它们的清亮点几乎一致, 因而化合物1g有更宽的介晶性温度范围.     

苯并菲盘状液晶的合成、亲氟效应及分子对称性对介晶性的影响

New symmetrical and asymmetrical triphenylene-containing discotic liquid crystals with two different peripheral alkyl chains, known as sym-TP(OC6H13)3(OR)3 and asym-TP(OC6H13)3(OR)3, were synthesized. Their thermotropic liquid crystal properties were investigated through polarizing optical microscopy (POM), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analyses. The asyrranetdcal discogens are 2,6,11-rialkoxy-3,7,10-trihexyloxytriphenylenes, with the alkyl chain carbon numbers varying from 3-10, 12, and 14, while the symmetrical compounds are 2,6,10-trialkyloxy-3,7,11-trihexyloxytriphenylene. Two fluoroalkoxy substituted triphenylene discogens, 2,6,10-td(4,4,4-trifluorobutoxy)-3,7,11-trihexyloxytriphenylene and its asymmetrical isomer 2,6,11-tri(4,4,4-trifluorobutoxy)-3,7,10-trihexyloxytdphenylene were prepared. These two compounds show higher melting and clearing points than their alkoxy analogs, which implies that fluorophilic effect exists in the formation and stabilization of discotic columnar mesophase. The triphenylene derivatives TP(OC6H13)3(OR)3 with two different peripheral chains, symmetrically or asymmetrically attached on triphenylene cores, have lower melting points and clearing points than those of the higher symmetrical compounds TP(OR)6 with the same total chain carbon numbers. The mixed-chain-triphenylenes with longer alkoxy chains (n=9,10,12,14) show columnarmesophase at room temperature.     

The facile preparation of weakly coordinating anions: structure and characterisation of silverpolyfluoroalkoxyaluminates AgAl(ORF)4, calculation of the alkoxide ion affinity

Purified LiAlH4 reacts with fluorinated alcohols HORF to give LiAl(ORF)4 (RF=-CH(CF3)2, 2a; -C(CH3)(CF3)2, 2b; -C(CF3)3, 2c) in 77 to 90% yield. The crude lithium aluminates LiAl(ORF)4 react metathetically with AgF to give the silver aluminates AgAl(ORF)4 (RF=-CH(CF3)2, 3a; -C(CH3)(CF3)2, 3b; -C(CF3)3, 3c) in almost quantitative yield. The solid-state structures of solvated 3a-c showed that the silver cation is only weakly coordinated (CN(Ag)=6-10; CN = coordination number) by the solvent and/or weak cation - anion contacts Ag-X (X=O, F, Cl, C). The strength of the Ag-X contacts of 3a-c was analysed by Brown's bond-valence method and then compared with other silver salts of weakly coordinating anions (WCAs), for example [CB11H6Cl6]- and [M(OTeF5)n]- (M=B, Sb, n=4, 6). Based on this quantitative picture we showed that the Al[OC(CF3)3]4 anion is one of the most weakly coordinating anions known. Moreover, the AgAl(ORF)4 species are certainly the easiest WCAs to access preparatively (20 g in two days), additionally at low cost. The Al-O bond length of Al(ORF)4- is shortest in the sterically congested Al[OC(CF3)3]4- anion-which is stable in H2O and aqueous HNO3 (35 weight%)--and indicates a strong and highly polar Al-O bond that is resistant towards heterolytic alkoxide ion abstraction. This observation was supported by a series of HF-DFT calculations of OR-, Al(OR)3 and Al(OR)4- at the MPW1PW91 and B3LYP levels (R= CH3, CF3, C(CF3)3). The alkoxide ion affinity (AIA) is highest for R=CF3 (AlA=384 +/- 9 kJ x mol(-1)) and R= C(CF3)3 (AIA=390 +/- 3 kJ x mol(-1)), but lowest for R=CH3 (AIA=363 +/- 7 kJ X mol(-1)). The gaseous AL(ORF)4-anions are stable against the action of the strong Lewis acid ALF3(g) by 88.5 +/- 2.5 (RF=CF3) and 63 +/- 12 kJ X mol(-1) (RF=C(CF3)3), while AL(OCH3)4- decomposes with -91 +/- 2 kJ X mol(-1). Therefore the presented fluorinated aluminates AL(ORF)4- appear to be ideal candidates when large and resistant WCAs are needed, for example, in cationic homogenous catalysis, for highly electrophilic cations or for weak cationic Lewis acid/base complexes.     

Bis[(2-diphenylphosphino)phenyl]mercury: a P-donor ligand and precursor to mixed metal-mercury (d(8)-d(10)) cyclometalated complexes containing 2-C(6)H(4)PPh(2)

Treatment of HgCl(2) with 2-LiC(6)H(4)PPh(2) gives [Hg(2-C(6)H(4)PPh(2))(2)] (1), whose phosphorus atoms take up oxygen, sulfur, and borane to give the compounds [Hg[2-C(6)H(4)P(X)Ph(2)](2)] [ X = O (3), S (4), and BH(3) (5)], respectively. Compound 1 functions as a bidentate ligand of wide, variable bite angle that can span either cis or trans coordination sites in a planar complex. Representative complexes include [HgX(2) x 1] [X = Cl (6a), Br (6b)], cis-[PtX(2) x 1] [X = Cl (cis-7), Me (9), Ph (10)], and trans-[MX(2) x 1] [X = Cl, M = Pt (trans-7), Pd (8), Ni (11); X = NCS, M = Ni (13)] in which the central metal ions are in either tetrahedral (6a,b) or planar (7-11, 13) coordination. The trans disposition of 1 in complexes trans-7, 8, and 11 imposes close metal-mercury contacts [2.8339(7), 2.8797(8), and 2.756(8) A, respectively] that are suggestive of a donor-acceptor interaction, M --> Hg. Prolonged heating of 1 with [PtCl(2)(cod)] gives the binuclear cyclometalated complex [(eta(2)-2-C(6)H(4)PPh(2))Pt(mu-2-C(6)H(4)PPh(2))(2)HgCl] (14) from which the salt [(eta(2)-2-C(6)H(4)PPh(2))Pt(mu-2-C(6)H(4)PPh(2))(2)Hg]PF(6) (15) is derived by treatment with AgPF(6). In 14 and 15, the mu-C(6)H(4)PPh(2) groups adopt a head-to-tail arrangement, and the Pt-Hg separation in 14, 3.1335(5) A, is in the range expected for a weak metallophilic interaction. A similar arrangement of bridging groups is found in [Cl((n)Bu(3)P)Pd(mu-C(6)H(4)PPh(2))(2)HgCl] (16), which is formed by heating 1 with [PdCl(2)(P(n)()Bu(3))(2)]. Reaction of 1 with [Pd(dba)(2)] [dba = dibenzylideneacetone] at room temperature gives [Pd(1)(2)] (19) which, in air, forms a trigonal planar palladium(0) complex 20 containing bidentate 1 and the monodentate phosphine-phosphine oxide ligand [Hg(2-C(6)H(4)PPh(2))[2-C(6)H(4)P(O)Ph(2)]]. On heating, 19 eliminates Pd and Hg, and the C-C coupled product 2-Ph(2)PC(6)H(4)C(6)H(4)PPh(2)-2 (18) is formed by reductive elimination. In contrast, 1 reacts with platinum(0) complexes to give a bis(aryl)platinum(II) species formulated as [Pt(eta(1)-C-2-C(6)H(4)PPh(2))(eta(2)-2-C(6)H(4)PPh(2))(eta(1)-P-1)]. Crystal data are as follows. Compound 3: monoclinic, P2(1)/n, with a = 11.331(3) A, b = 9.381(2) A, c = 14.516 A, beta = 98.30(2) degrees, and Z = 2. Compound 6b x 2CH(2)Cl(2): triclinic, P macro 1, with a = 12.720(3) A, b = 13.154(3) A, c = 12.724(2) A, alpha = 92.01(2) degrees, beta = 109.19(2) degrees, gamma = 90.82(2) degrees, and Z = 2. Compound trans-7 x 2CH(2)Cl(2): orthorhombic, Pbca, with a = 19.805(3) A, b = 8.532(4) A, c = 23.076(2) A, and Z = 4. Compound 11 x 2CH(2)Cl(2): orthorhombic, Pbca, with a = 19.455(3) A, b = 8.496(5) A, c = 22.858(3) A, and Z = 4. Compound 14: monoclinic, P2(1)/c, with a = 13.150(3) A, b = 12.912(6) A, c = 26.724(2) A, beta = 94.09(1) degrees, and Z = 4. Compound 20 x C(6)H(5)CH(3).0.5CH(2)Cl(2): triclinic, P macro 1, with a = 13.199(1) A, b = 15.273(2) A, c = 17.850(1) A, alpha = 93.830(7), beta = 93.664(6), gamma = 104.378(7) degrees, and Z = 2.     

Preparation and Crystal Structure of Hetero-metal Clusters [h5-C5H4C(O)CH2CH2C(O)OCH3]FeCoM(m3-S)(CO)8 (M = Mo or W)

The hetero-metal clusters [h5-C5H4C(O)CH2CH2C(O)OCH3]FeCoM(m3-S)(CO)8 (M = Mo 1, M = W 2) were prepared by thermal reactions of FeCo2(CO)9(m3-S) with metal exchange reagent [h5-C5H4C(O)CH2CH2C(O)OCH3]M(CO)3Na (M = Mo or W) in THF. Cluster 1 reacted with 2,4-dinitrophenylhydrazine at room temperature to yield the cluster hydrazone derivative (m3-S)CoFeMo(CO)8[h5-C5H4C(NR)Me] [R = NHC6H3-2,4-(NO2)2] 3. All the compounds were characterized by elemental analyses, IR and NMR spectra. Cluster 1 was determined by single crystal X-ray diffraction. Crystal data: C18H11O11SCoFeMo, Mr = 646.05, triclinic, space group P_1, a = 8.148(2), b = 10.685(3), c = 13.410(4) ?, a = 100.077(5), b = 102.452(5), g = 91.108(6)°, V = 1120.4(5) ?3, Z = 2, Dc = 1.915 g/cm3, F(000) = 636, m = 2.071 mm-1, the final R = 0.0378 and wR = 0.0968 for 5074 observations with (I > 2s(I)).     

Substituted N-picolylethylenediamines of the type (ArNHCH2CH2){(2-C5H4N)CH2}NR [R = Me, 4-CH2=CH(C6H4)CH2, (2-C5H4N)CH2] and their transition metal(II) halide complexes

Alkylation of (ArNHCH2CH2){(2-C5H4N)CH2}NH with RX [RX = MeI, 4-CH2=CH(C6H4)CH2Cl) and (2-C5H5N)CH2Cl] in the presence of base has allowed access to the sterically demanding multidentate nitrogen donor ligands, {(2,4,6-Me3C6H2)NHCH2CH2}{(2-C5H4N)CH2}NMe (L1), {(2,6-Me3C6H3)NHCH2CH2}{(2-C5H4N)CH2}NCH2(C6H4)-4-CH=CH2 (L2) and (ArNHCH2CH2){(2-C5H4N)CH2}2N (Ar = 2,4-Me2C6H3 L3a, 2,6-Me2C6H3 L3b) in moderate yield. L3 can also be prepared in higher yield by the reaction of (NH2CH2CH2){(2-C5H4N)CH2}2N with the corresponding aryl bromide in the presence of base and a palladium(0) catalyst. Treatment of L1 or L2 with MCl2 [MCl2 = CoCl2.6H2O or FeCl2(THF)1.5] in THF affords the high spin complexes [(L1)MCl2](M = Co 1a, Fe 1b) and [(L2)MCl2](M = Co 2a, Fe 2b) in good yield, respectively; the molecular structure of reveals a five-coordinate metal centre with bound in a facial fashion. The six-coordinate complexes, [(L3a)MCl2](M = Co 3a, Fe 3b, Mn 3c) are accessible on treatment of tripodal L3a with MCl2. In contrast, the reaction with the more sterically encumbered leads to the pseudo-five-coordinate species [(L3b)MCl2](M = Co 4a, Fe 4b) and, in the case of manganese, dimeric [(L3b)MnCl(mu-Cl)]2 (4c); in 4a and 4b the aryl-substituted amine arm forms a partial interaction with the metal centre while in 4c the arm is pendant. The single crystal X-ray structures of , 1a, 3b.MeCN, 3c.MeCN, 4b.MeCN and 4c are described as are the solution state properties of 3b and 4b.     

一种含稀土阳离子的多金属氧酸盐二聚体的合成及晶体结构(英文)

以Na7[α-PW11O39].nH2O,Sm(NO3)3.6H2O和(CH3)4NCl为原料,利用常规的水溶液方法合成了一例新的2∶2型二聚单缺位Keggin结构多金属氧酸盐稀土衍生物[(CH3)4N]6[(α-PW11O39H)Sm(H2O)3]2.9H2O(1);利用X射线单晶衍射表征了其晶体结构.结果表明,该二聚体属单斜晶系,P2(1)/c空间群,晶胞参数为:a=1.300 8(10)nm,b=2.219 0(17)nm,c=2.097 0(16)nm,β=100.992(16),Z=2,R1=0.074 6,wR2=0.182 6.二聚阴离子[{(α-PW11O39H)Sm(H2O)4}2]6-由2个[α-PW11O39H]6-缺位阴离子通过2个[Sm(H2O)4]3+配离子连接形成,Sm3+离子占据[α-PW11O39H]6-阴离子的缺位位置并取八配位单四方反棱柱构型,相邻的2个单取代阴离子[α-PW11O39H]6-通过2个Sm-Ot-W桥连成二聚物.     

Synthesis and Characterization of the Chiral Skeleton Cluster [η~5-C_5H_4C(O)CH_2CH_2C(O)OCH_3]RuCoW(μ_3-Se)(CO)_8

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｒａｎｓｉｔｉｏｎｍｅｔａｌｃｌｕｓｔｅｒｃｏｍｐｌｅｘｅｓｈａｖｅｂｅｅｎｒｅｃｅｉｖｉｎｇｃｏｎｓｉｄｅｒａｂｌｅａｔｔｅｎｔｉｏｎｉｎｒｅｃｅｎｔ ｙｅａｒｓｌａｒｇｅｌｙｂｅｃａｕｓｅｏｆｔｈｅｉｒ ｐｏｔｅｎｔｉａｌａｐｐｌｉｃａｔｉｏｎｓｉｎｃａｔａｌｙｓｉｓａｓｗｅｌｌａｓｔｈｅｎｏｖｅｌｔｙａｎｄｖｅｒｓａｔｉｌｉｔｙｏｆｔｈｅｉｒｒｅａｃｔｉｏｎｓａｎｄｓｔｒｕｃｔｕｒｅｓ.[1～ 4] Ｏｕｒｉｎｔｅｒｅｓｔｉｎｍｅｔａｌｃｌｕｓｔｅｒｃａｔａｌｙｓｉｓｐ…     

Copolymerization of silyl vinyl ethers with olefins by (alpha-diimine)PdR+

This paper reports that (alpha-diimine)PdMe+ catalyzes the copolymerization of olefins and silyl vinyl ethers. The reactions of (alpha-diimine)PdMe+ (alpha-diimine = (2,6-iPr2-C6H3)N=CMe-CMe=N(2,6-iPr2-C6H3)) with excess vinyl ethers CH2=CHOR (1a-d: R = tBu (a), SiMe3 (b), SiPh3 (c), Ph (d)) in CH2Cl2 at 20 degrees C afford polymers for 1a (rapidly) and 1b (slowly) but not for 1c or 1d. The structures of poly(1a,b) indicate a cationic polymerization mechanism. The reaction of (alpha-diimine)PdMe+ with 1-2 equiv of 1a-d proceeds by sequential C=C pi-complexation to form (alpha-diimine)PdMe(CH2=CHOR)+ (2a-d), 1,2 insertion to form (alpha-diimine)Pd(CH2CHMeOR)+ (3a-d), reversible isomerization to (alpha-diimine)Pd(CMe2OR)+ (4a-d), beta-OR elimination to generate (alpha-diimine)Pd(OR)(CH2=CHMe)+ (not observed), and allylic C-H activation to yield (alpha-diimine)Pd(eta3-C3H5)+ (5) and ROH. The reaction of (alpha-diimine)PdMe+ with 1-hexene/1b and 1-hexene/1c mixtures in CH2Cl2 at 20 degrees C affords copolymers containing up to 20 mol % silyl vinyl ether. The copolymers were purified to be free of any -[CH2CHOSiR3]n- homopolymer. The copolymer structures are similar to that of homopoly(1-hexene) generated under the same conditions. The major comonomer units are CH3CH(OSiR3)CH2-, CH2(OSiR3)CH2- and -CH2CH(OSiR3)CH2-. The 1-hexene/CH2=CHOSiR3 copolymers can be desilylated to give 1-hexene/CH2=CHOH copolymers. The results of control experiments argue against cationic and radical mechanisms for the copolymerization, and an insertion/chain-walking mechanism is proposed.