Synthesis of amphiphilic poly(para‐phenylene)s by Suzuki polycondensation

1,4‐Dibromobenzenes carrying nonpolar hexoxy and polar oligo(ethylene glycol) side chains were subjected to Suzuki polycondensation with a benzene‐1,4‐bisboronic acid ester to produce high‐molar‐mass poly(para‐phenylene)s. The molar masses were determined with size exclusion chromatography with conventional polystyrene and universal calibration. These novel amphiphilically equipped rigid‐rod polymers have the potential to segregate lengthwise into polar and nonpolar domains, a property that has only rarely been described, and promise to exhibit novel interesting supramolecular properties. The oligo(ethylene gylcol) side chains terminate with a silyl‐protected alcohol group, and its deprotection on the polymer was proven to proceed quantitatively. This not only led to a further polarity increase but allows us to attach even more polar (e.g., charged) units in future projects. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2879–2889, 2003     

Nonpolar second‐order nonlinear and electrooptic materials: Axially ordered chiral polymers and liquid crystals

This article reviews our work on the development and optimization of chiral, nonpolar media with large second‐order nonlinear optical responses. We show how molecular engineering, theory, and measurements can be used to optimize this promising class of nonlinear optical materials. We describe how supramolecular alignment into easily processable materials takes advantage of the relevant molecular hyperpolarizabilities. A wide variety of techniques can be used to fabricate bulk materials belonging to the chiral nonpolar symmetry groups, D_∞ and D₂. The microscopic chromophore alignment schemes that optimize the nonlinear optical response in such materials are deduced from general symmetry considerations for both molecules and bulk. We also speculate on the possible applications of such materials as image‐plane modulators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2744–2754, 2003     

SOLVENT EFFECT ON SPHEROIDENE IN NONPOLAR AND POLAR SOLUTIONS AND THE ENVIRONMENT OF SPHEROIDENE IN THE LIGHT-HARVESTING COMPLEXES OF Rhodobacter sphaeroides 2.4.1 AS REVEALED BY THE ENERGY OF THE 1Ag−→1Bu+ ABSORPTION AND THE FREQUENCIES OF THE VIBRONICALLY COUPLED C=C STRETCHING RAMAN LINES IN THE 1Ag− AND 1Bu− STATES

Abstract –The ¹A_g^?→¹B_u⁺ electronic absorption band and the vibronically coupled, C=C stretching Raman lines in the ¹A_g^? and 2¹A_g^? states were recorded for spheroidene free in nonpolar and polar solvents as well as for spheroidene bound to the LH1 and LH2 complexes of Rhodobacter sphaeroides 2.4.1. The ¹B_u⁺ energy exhibited a linear dependence on R(n) = (n² - 1)/(n²+ 2) in both nonpolar and polar solvents; the line for polar solvents had a gentler slope and crossed the line for nonpolar solvents at R(n) = 0.3. The above characteristic of polar solvents was ascribed to the electric field generated by fluctuation of the solvent permanent dipoles; it stabilizes the ¹B_u⁺ energy and reduces the polarizability of the solvent. The vibronically coupled, C=C stretching frequencies in the ¹A_g^? and 2¹A_g^? states [ν(A_g) and [ν(2A_g)] also showed similar dependence on R(n), which is explained in terms of vibronic coupling among the ¹A_g^?, 2¹A_g^? and 3¹A_g^? states. The environment of spheroidene in the LH2 and LH1 complexes was assessed on the basis of the ¹B_u⁺ energy and the ν(A_g) and [ν(2A_g) frequencies: Spheroidene in the LH2 complex is located in an environment with high polarizability, while spheroidene in the LH1 complex is located in an environment with lower polarizability.     

Novel amphiphilic network polymers consisting of nonpolar,short primary polymer chains and polar,long crosslink units: Influence of characteristic dangling chains on swelling behavior of resulting amphiphilic gels

Novel amphiphilic network polymers consisting of nonpolar, short primary polymer chains and polar, long crosslink units were prepared, and the swelling behavior of resulting amphiphilic gels is discussed by focusing on the influence of characteristic dangling chains; that is, benzyl methacrylate (BzMA) was copolymerized with tricosaethylene glycol dimethacrylate [CH₂?C(CH₃)CO(OCH₂CH₂)₂₃OCOC(CH₃)?CH₂, PEGDMA‐23] in the presence of lauryl mercaptan as a chain‐transfer agent because BzMA forms nonpolar, short primary polymer chains and PEGDMA‐23 as a crosslinker contains a polar, long poly(oxyethylene) unit. The enhanced incorporation of dangling chains into the network polymer was brought by shortening the primary polymer chain length, and copolymerization with methoxytricosaethylene glycol methacrylate, a mono‐ene counterpart of PEGDMA‐23, enforced the incorporation of flexible dangling poly(oxyethylene) chains into the network polymer, although the former dangling chains as terminal parts of primary poly(BzMA) chains were rather rigid. Then, the influence of characteristic dangling chains on the swelling behavior of amphiphilic gels was examined in mixed solvents consisting of nonpolar t‐butylbenzene and polar methanol. The profiles of the solvent‐component dependencies of the swelling ratios were characteristic of amphiphilic gels. The introduction of dangling poly(oxyethylene) chains led not only to an increased swelling ratio but also to sharpened swelling behavior of amphiphilic gels. The swelling response of amphiphilic gels was checked by changing the external solvent polarity. The dangling chains with freely mobile end segments influenced the swelling response of gels. The amphiphilic gels with less entangled, collapsed crosslink units exhibited faster swelling response than the ones with more entangled, collapsed primary polymer chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2192–2201, 2004     

Amphiphilic polymethacrylates as crosslinked polymer precursors obtained by free‐radical monomethacrylate/dimethacrylate copolymerizations

As an extension of our work on the elucidation of the mechanism and control of 3‐dimensional network formation in the free‐radical crosslinking polymerization and copolymerization of multivinyl compounds with the aim to molecularly design vinyl‐type network polymers, novel amphiphilic polymers were prepared as crosslinked polymer precursors. Thus, benzyl methacrylate, a nonpolar monomer, was copolymerized radically with 5 mol % of triicosaethylene glycol dimethacrylate [CH₂C(CH₃)CO(OCH₂CH₂)₂₃OCOC(CH₃)CH₂], a polar monomer, in the presence of lauryl mercaptan as a chain transfer agent. The resulting prepolymers (i.e., vinyl‐type network‐polymer precursors or amphiphilic polymers) were characterized mainly by viscometry using t‐butylbenzene (t‐BB) and a t‐BB/MeOH (80/20) mixture as solvents. The viscosities in the t‐BB/MeOH (80/20) mixture were quite high compared with those in t‐BB, and completely reversed concentration dependencies were observed in the solvents. These are discussed by considering the difference in conformation and the shrinkage of polar, flexible polyoxyethylene units or the entanglement of nonpolar, rigid primary chains. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4396–4402, 2000     

Manipulation of the molecular weight and branching structure of hyperbranched poly(arylene ether phosphine oxide)s prepared via an A2 + B3 approach

A series of hyperbranched poly(arylene ether phosphine oxide)s (HB PAEPOs) were prepared via an A₂ + B₃ polymerization scheme with tris(4‐fluorophenyl)phosphine oxide as B₃, and a variety of bisphenols as A₂. The effects of the reactivity of the A₂ monomer, the A:B ratio, the addition mode, the solvent, and the concentration on the final molecular weight, polydispersity index (PDI), and degree of branching (DB) were studied. Soluble HB PAEPOs with weight‐average molecular weights of up to 299,000 Da were achieved. Reactions in which the A₂ component was added slowly resulted in lower DBs (0.2–0.5), whereas the slow addition of the B₃ component provided samples with DBs of approximately 0.75. Reactions performed under high‐dilution conditions afforded completely soluble materials with weight‐average molecular weights of 9000–12,100 Da and PDI values as low as 2.20. The molecular weights achieved under high‐dilution conditions were independent of the mode of monomer addition. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3871–3881, 2003     

Fluorescent polymer particles by emulsion and miniemulsion polymerization

We describe the synthesis and characterization of latex particles labeled with a brightly fluorescent yellow dye (HY) based on the benzothioxanthene ring structure. Three dye derivatives were synthesized with different spacers connecting the HY nucleus to a methacrylate group. For one of the dyes (HY2CMA, r_A), we show that the reactivity ratios with styrene (r_A = 0.71, r_B = 0.25) and butyl methacrylate (r_A = 0.87, r_B = 0.14) should lead to random dye incorporation if the amount of dye in the feed is small. Seeded emulsion polymerization fails to lead to significant dye incorporation unless large amounts of nonionic surfactant are present. In contrast, miniemulsion polymerization worked well to yield latex particles of polystyrene, poly(butyl methacrylate), and poly(methyl methacrylate) with high monomer conversion and essentially quantitative dye incorporation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 766–778, 2003     

Polar‐Solvent Effect on the Photocycloisomerization of Symmetrical Bis[anthracenes]: A Transient Ultrafast Kinetic Study

Bis[anthracenes] are the few among the fluorescing nonconjugated bichromophores that possess photoreactive properties. The 9,9′‐[methylenebis(oxy)]bis[anthracenes] 1 (AOCH₂OA) exhibit the highest known intramolecular photocycloaddition quantum yield from the S₁ state and, moreover, display a higher yield in polar solvents, an unexpected result for symmetrical systems. No excimer fluorescence was detected in solution at room temperature. The 10,10′‐dimethoxy derivative 1b was studied by picosecond (ps) laser spectroscopy. In nonpolar solvents (methylcyclohexane), S_n←S₁ was the only transient absorption detected, whereas, in polar solvents (MeCN), the growth and the decay of a second transient were recorded, and the second transient was attributed to a zwitterion A^+.−A^−.. The kinetics data were derived, and it was concluded that electron transfer and ion recombination should be at the origin of the observed rate enhancement of cycloadduct formation in polar solvents.     

Bulk hydrosilylation reaction of poly(dimethylsiloxane) chains catalyzed by a platinum salt: Effect of the initial concentration of reactive groups on the final extent of reaction

Model silicone networks obtained by curing linear poly(dimethylsiloxane) (PDMS) chains with end‐vinyl groups, (B₂), with a polyfunctional silane‐terminated crosslinker of functionality f, (A_f), through a hydrosilylation reaction have been widely used. In these networks, the principal characteristics of their ultimate molecular structure are strongly affected by the final extent of reaction reached during the crosslinking reaction. This work analyzes the effect of the initial concentration of the reactive end groups on the maximum attainable extent of reaction under normal bulk crosslinking conditions. This was accomplished by examining the reaction between linear B₂ PDMS chains with difunctional and trifunctional silanes. The experimental results were fitted by an exponential equation to have an empirical equation able to predict the maximum extent of reaction to be obtained as a function of the initial concentration of reactive groups. Molecular parameters relevant to this study, such as the degree of polymerization, the weight‐average molecular weight for the A₂ + B₂ system, or the weight fraction of solubles for the A₃ + B₂ system, were calculated with a mean field theory (recursive approach). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1099–1106, 2003     

Solution viscosity behavior of polystyrene-based cationic ionomers. Effects of ion content and solvent

Dilute-solution viscosities of polystyrene-based cationic ionomers containing ammonio or phosphonio groups were measured in several solvents. In polar solvents with dielectric constant (ε_r) beyond 10, the ionomers showed a typical polyelectrolyte behavior, indicating that a large part of ionic groups were dissociated into ions. In nonpolar solvents with low ε_r, the reduced viscosity of the ionomers linearly decreased with a decreasing ionomer concentration. At low polymer concentrations, every ionomer gave a reduced viscosity lower than that of the corresponding chloromethylated polystyrene. With an increasing ion content, the intrinsic viscosity progressively decreased if the nonpolar solvents had a low acceptor number (A_N), such as toluene or tetrahydrofran (THF). In the halogenated solvents with high A_N value, such as chloroform, however, the intrinsic viscosity was hardly dependent on the ion content. This indicates that the intramolecular aggregation among the ionic groups is inhibited in the halogenated solvents due to a strong anion solvation. An addition of a protic solvent to a nonpolar solvent eliminates the aggregation between ionic groups and leads to polyelectrolyte behavior. © 1994 John Wiley & Sons, Inc.     

Polytetrahydrofuran amphiphilic networks. IV. Swelling behavior of poly(acrylic acid)‐l‐polytetrahydrofuran and poly(methacrylic acid)‐l‐polytetrahydrofuran networks

Poly(acrylic acid)‐l‐polytetrahydrofuran (PAA‐l‐PTHF) and poly(methacrylic acid)‐l‐polytetrahydrofuran (PMAA‐l‐PTHF) networks were synthesized by the free‐radical copolymerization of hydrophobic polytetrahydrofuran diacrylates with hydrophilic acrylic acid and methacrylic acid. Their swelling behavior was studied. Both PAA‐l‐PTHF and PMAA‐l‐PTHF networks had four solubility parameters, which indicated that they exhibited not only the properties of both hydrophobic and hydrophilic segments but also the combined properties of these two segments. The swell of these two series of networks was composition‐dependent in organic solvents and water. The relationship between the equilibrium swelling ratio (SR_e) in nonpolar solvents and the composition of the networks [the weight fraction of the PTHF segment (PTHF%)] may be expressed with a linear equation: SR_e = A × PTHF% + B. A and B are parameters that relate to the interaction of hydrophilic and hydrophobic segments with nonpolar solvents and to the properties of the networks, respectively. Because of the presence of a ? COOH group, these two network series were pH‐sensitive when the content of hydrophilic segments was higher. The pH sensitivity of networks could be controlled not only by the composition of the networks but also by the hydrophobic degree of the hydrophilic segments. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1784–1790, 2001     

Synthesis of star poly(1,3‐cyclohexadiene): Grafting reaction of poly(1,3‐cyclohexadienyl)lithium onto C60

The grafting reaction of poly(1,3‐cyclohexadienyl)lithium onto fullerene‐C₆₀ (C₆₀) was strongly affected by the nucleophilicity of poly(1,3‐cyclohexadiene) (PCHD) carbanions and the polymer chain microstructure, and progressed via step‐by‐step reactions. A star‐shaped PCHD, having a maximum of four arms, was obtained from poly(1,3‐cyclohexadienyl)lithium composed of all 1,4‐cyclohexadiene (1,4‐CHD) units. The rate of the grafting reaction was accelerated by the addition of amine. The grafting density of PCHD arms onto C₆₀ decreased with an increase in the molar ratio of 1,2‐cyclohexadiene (1,2‐CHD) units. The electron‐transfer reaction from PCHD carbanions to C₆₀ did not occur in either a nonpolar solvent or a polar solvent. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3282–3293, 2008.     

Unique dual function of La(C5Me5)[CH(SiMe3)2]2(THF) for polymerizations of both nonpolar and polar monomers

A half‐metallocene‐type complex, La(C₅Me₅)[CH(SiMe₃)₂]₂tetrahydrofuran (THF) 1 , showed the dual function of performing the controlled polymerizations of nonpolar monomers such as ethylene and styrene as well as polar monomers like methyl methacrylate, hexyl isocyanate, and acrylonitrile in high yields. On the other hand, the metallocene‐type rare‐earth metal complexes, [(C₅H₄SiMe₃)₂Y(μ‐Me)]₂ 2 and (C₅Me₅)₂YMe(THF) 3 , showed relatively low catalytic activity. The structure of complex 2 was characterized by X‐ray analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1382–1390, 2001     

Synthesis,characterization, and optimum reaction conditions of oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol

The reaction conditions of the oxidative polycondensation of 2‐[(pyridine‐2‐yl‐methylene) amino] phenol (2‐PMAP) with air O₂, H₂O₂, and NaOCl were studied in an aqueous alkaline medium between 60 and 90 °C. Oligo‐2‐[(pyridine‐2‐yl‐methylene) amino] phenol (O‐2‐PMAP) was characterized with ¹H NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography (SEC), and elemental analysis techniques. Moreover, solubility testing of the oligomer was performed in polar and nonpolar organic solvents. With the NaOCl, H₂O₂, and air O₂ oxidants, the conversions of 2‐PMAP into O‐2‐PMAP were 98, 87, and 62%, respectively, in an aqueous alkaline medium. According to SEC, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of O‐2‐PMAP were 2262 g mol^?1, 2809 g mol^?1, and 1.24 with NaOCl, 3045 g mol^?1, 3861 g mol^?1, and 1.27 with air O₂, and 1427 g mol^?1, 1648 g mol^?1, and 1.16 with air H₂O₂, respectively. Also, thermogravimetric analysis showed that O‐2‐PMAP was stable against thermooxidative decomposition. The weight loss of O‐2‐PMAP was 96.68% at 900 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2717–2724, 2004     

4-Dimethylaminochalcone as fluorescent probe: effect of the medium polarity on relaxation processes in the excited state

Relaxation processes in a 4-dimethylaminochalcone molecule after excitation with a light pulse of duration 70 fs were studied. During 0.4–1 ps after excitation, an absorbance of an excited state S₁ with a maximum at 460 nm is formed in both polar and nonpolar media. Subsequent relaxation processes depend on the polarity of the medium. In nonpolar hexane, the 4-dimethylaminochalcone molecule transits to the triplet state having an absorption maximum at 570 nm (lifetime longer than 600 ps) for 20 ps. In polar aprotic acetonitrile, the absorbance at 460 nm decreases slowly (during hundreds of picoseconds), indicating that the molecules return to the ground state. The induced emission from the level S₁ in a region of 520–550 nm and fluorescence from the same level with a maximum at 537 nm are also observed in acetonitrile. Thus, a reason for a sharp decrease in the fluorescence yield on going from polar to nonpolar media was found. The mechanism of fluorescence quenching of 4-dimethylaminochalcone in nonpolar media is confirmed by the data on phosphorescence. The phosphorescence of 4-dimethylaminochalcone is observed at–196 °C in nonpolar solvents, indicating a triplet excited state, while no phosphorescence is revealed in polar solvents.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1607–1610, August, 2004.     

Sol–gel coatings with covalently attached methyl,octyl, and octadecyl ligands for capillary microextraction. Effects of alkyl chain length and sol–gel precursor concentration on extraction behavior

Fused silica capillaries with surface-bonded sol–gel coatings containing covalently attached octadecyl, octyl, and methyl groups were prepared for capillary microextraction (CME) hyphenated on-line with high-performance liquid chromatography (HPLC). For this, octadecyltrimethoxysilane (C₁₈TMS), octyltrimethoxysilane (C₈TMS), or methyltrimethoxysilane (MTMS) was used as the respective sol–gel precursor. Hydrolytic polycondensation of these precursors led to the formation of surface-bonded sol–gel sorbents with pendant alkyl groups ready to serve as the extraction medium; no additional surface derivatization reactions were needed to anchor these ligands to the surface. Extraction behaviors of two sets of microextraction capillaries with alkyl-bonded sol–gel coatings were investigated: (a) capillaries prepared with a constant molar concentration of these precursors in the sol solution, and (b) capillaries prepared with varied molar concentrations of C₈TMS in the sol solution. Among the capillaries prepared using sol solutions with the same molar concentration of sol–gel precursor, the detection limits for nonpolar and polar analytes ranged from 0.3 ng/L to 213.9 ng/L. The sol–gel octadecyl-coated capillaries were found to be the most efficient at extracting these analytes, followed by the sol–gel octyl-coated capillaries, followed by the sol–gel methyl-coated capillaries. The results of this study point to the possibility that polar analytes are extracted through synergistic molecular level interactions of the polar and nonpolar parts of the analyte molecules with the alkyl chains and silanol groups within the sol–gel coatings. These coatings also demonstrated run-to-run and capillary-to-capillary reproducibility, with HPLC peak area RSD values ranging from 1.1% to 9.6% and 1.3% to 10.0%, respectively. In the set of sol–gel octyl capillaries with varied molar concentrations, the capillaries prepared with 0.514 M concentration of C₈TMS in the sol solution were most efficient in extracting nonpolar and polar analytes. When higher or lower concentrations of C₈TMS were used in the sol solution, the resulting sol–gel coated capillaries were less efficient in extracting nonpolar and polar analytes.     

Synthesis and characterization of a film‐forming,crosslinked, amphiphilic block copolymer of butadiene and acrylamide

An amphiphilic block copolymer of acrylamide and butadiene was synthesized by the polymerization of acrylamide in the presence of the crosslinker N,N′‐methylene bisacrylamide initiated by a hydroxyl‐terminated polybutadiene/V(V) macroredox initiator. The product had good film‐forming ability. It was characterized by IR and NMR spectroscopy, viscosity, swelling, and microhardness measurements, scanning electron micrography, and differential scanning calorimetry. A good film was obtained from the block copolymer with a greater proportion of butadiene; it had greater permeability for nonpolar solvents, and it was poorly permeable to water and other polar solvents. The film swelled in polar and nonpolar solvents and had almost the same capacity for the loading and release of hydrophilic and hydrophobic dyes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3290–3303, 2006     

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s from A2 + B3 approach in poly(phosphoric acid)

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s (HPEKs) were prepared from “A₂ + B₃” approach by using different monomer solubility in reaction medium. 1,3,5‐Triphenoxybenzene as a hydrophobic B₃ monomer was reacted with commercially available terephthalic acid or 4,4′‐oxybis(benzoic acid) as a hydrophilic A₂ monomer in a hydrophilic reaction medium, polyphosphoric acid (PPA)/phosphorous pentoxide (P₂O₅). The resultant HPEKs were soluble in various common organic solvents and had the weight‐average molecular weight in the range of 3900–13,400 g/mol. The results implied that HPEKs were branched structures instead of crosslinked polymers. The molecular sizes and shapes of HPEKs were further assured by morphological investigation with scanning electron microscopy (SEM) and atomic force microscopy (AFM). Hence, the applied polymerization condition was indeed strong enough to efficiently facilitate polycondensation via “direct” Friedel‐Crafts reaction without gelation. It could be concluded that the polymer forming reaction was kinetically controlled by automatic and slow feeding of the hydrophobic B₃ monomer into the hydrophilic reaction mixture containing hydrophilic comonomer. As a result, hyperbranched structures were formed instead of crosslinked polymers even at full conversion (equifunctional monomer feed ratio). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3326–3336, 2009     

Photocycloaddition‐induced preparation of nanostructured,cyclic polymers using biscinnamated or biscoumarinated oligo(ethylene glycol)s

Two types of photoreactive water‐soluble oligo(ethylene glycol)s (OEGs; M_n = ca. 6500) were prepared by derivatization of OEG with photodimerizable groups such as cinnamates or coumarinates at both ends. Upon UV light irradiation of biscinnamated OEG in an aqueous solution, almost all trans‐cinnamate groups were isomerized to cis form in preference to dimerization even in an associated state at high concentrations of cinnamate groups, whereas dimerization via intermolecular photocycloaddition was the dominant process in methanol solution and in the film state. Coumarinate groups attached to OEG were photodimerized by UV irradiation, and this process was enhanced in an aqueous solution and in film cast from a polar solvent by hydrophobic association between coumarinate groups, resulting in the production of macromolecules. Kinetic analysis revealed that for low‐concentration aqueous solutions or a film cast from a nonpolar solvent, predominantly circular trimers to tetramers were produced on average, whereas from high‐concentration aqueous solutions or film cast from a polar solvent, mostly cyclic heptamers were produced. These results suggest that the molecular design of nanostructured, cyclic polymers of various sizes is possible by changing the concentration of aqueous solutions and cast solvents in this photoaddition system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3324–3336, 2005     

Gas transport properties of poly(ether‐b‐amide) segmented block copolymers

The permeation properties of H₂, N₂, and CO₂ were determined at 35 °C and pressures up to 15 atm in phase‐separated polyether‐b‐polyamide segmented block copolymers. These polymers contain poly(ethylene oxide) [PEO] or poly(tetramethylene oxide) [PTMEO] as the rubbery polyether phase and nylon‐6 [PA6] or nylon‐12 [PA12] as the hard polyamide phase. Extremely high values of polar (or quadrupolar)/nonpolar gas selectivities, coupled with high CO₂ permeability coefficients, were observed. CO₂/H₂ selectivities as high as 9.8 and CO₂/N₂ selectivities as high as 56 were obtained in polymers with CO₂ permeability coefficients of approximately 220 × 10⁻¹⁰ cm³(STP) cm/(cm² s cmHg). As the amount of polyether increases, permeability increases. Gas permeability is higher in polymers with less polar constituents, PTMEO and PA12, than in those containing the more polar PEO and PA6 units. CO₂/N₂ and CO₂/H₂ selectivities are higher in polymers with higher concentrations of polar groups. These high selectivity values derive from large solubility selectivities in favor of CO₂. Because CO₂ is larger than H₂ and has, therefore, a lower diffusion coefficient than H₂, the weak size‐sieving ability of the rubbery polyether phase, which is the locus of most of the gas permeation, also contributes to high CO₂/H₂ selectivity. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2051–2062, 2000