Synthesis and copolymerization of fluorinated monomers bearing a reactive lateral group. XX. Copolymerization of vinylidene fluoride with 4‐bromo‐1,1,2‐trifluorobut‐1‐ene

The radical copolymerization of vinylidene fluoride (VDF) with 4‐bromo‐1,1,2‐trifluorobut‐1‐ene (C₄Br) was examined. This bromofluorinated alkene was synthesized in three steps, which started with the addition of bromine to chlorotrifluoroethylene. In contrast to the ethylenation of 1,1‐difluoro‐1,2‐dibromochlorethane, which failed, that of 2‐chloro‐1,1,2‐trifluoro‐1,2‐dibromoethane was optimized and led to 2‐chloro‐1,1,2‐trifluoro‐1,4‐dibromobutane. The kinetics of the copolymerization of VDF with this brominated monomer initiated by t‐butyl peroxypivalate led to an assessment of the reactivity ratios, r_VDF = 0.96 ± 0.67 and r_C4Br = 0.09 ± 0.63, at 50 °C. The suspension copolymerization was also carried out, and the chemical modifications of the resulting bromo‐containing poly(vinylidene fluoride)s were attempted and consisted mainly of elimination or nucleophilic substitution of the bromine. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 917–935, 2005     

Synthesis and polymerization of fluorinated monomers bearing a reactive lateral group. XII. Copolymerization of vinylidene fluoride with 2,3,3‐trifluoroprop‐2‐enol

An improved synthesis of 2,3,3‐trifluoroprop‐2‐enol (FA1) and its copolymerization in solution with vinylidene fluoride (VDF, or 1,1‐difluoroethylene) initiated by tert‐butyl peroxypivalate are presented. A new synthesis of FA1, with NaH and lithium diisopropylamine as bases, from 2,2,3,3‐tetrafluoropropanol is described. A series of nine copolymerization reactions were investigated from initial [VDF]₀/[FA1]₀ molar ratios of 9.1/90.9 to 94.2/5.8. The copolymer compositions were calculated via ¹⁹F NMR spectroscopy. From the Tidwell–Mortimer method, the reactivity ratios of both comonomers were determined (r_FA1 = 0.11 ± 0.22 and r_VDF = 0.83 ± 0.77 at 50°C), and they showed an azeotropic point. Alfrey and Price's Q and e values of FA1 were calculated to be 0.0178 (from Q_VDF = 0.008), 0.039 (from Q_VDF = 0.015), and 0.275 (from Q_VDF = 0.036) and 2.74 (vs e_VDF = 1.20), 2.04 (vs e_VDF = 0.50), and 1.94 (vs e_VDF = 0.4), respectively, and they indicated that FA1 is an electron‐accepting monomer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3634–3643, 2002     

Radical copolymerization of vinylidene fluoride with 1‐bromo‐2,2‐difluoroethylene

The radical copolymerization of vinylidene fluoride (VDF) and 1‐bromo‐2,2‐difluoroethylene (BDFE) in 1,1,1,3,3‐pentafluorobutane solution at different monomer molar ratios (ranging from 96/4 to 25/75 mol %) and initiated by tert‐butylperoxypivalate (TBPPI, mainly) is presented. Poly(VDF‐co‐BDFE) copolymers of various aspects (from white powders to yellow viscous liquids) were produced depending on the copolymer compositions. The microstructures of the obtained copolymers were characterized by ¹⁹F and ¹H NMR spectroscopy and by elementary analysis and these techniques enabled one to assess the contents of both comonomers in the produced copolymers. VDF was shown to be more incorporated in the copolymer than BDFE. From the extended Kelen and Tudos method, the kinetics of the radical copolymerization led to the determination of the reactivity ratios, r_i, of both comonomers (r_VDF = 1.20 ± 0.50 and r_{BDFE =} 0.40 ± 0.15 at 75 °C) showing that VDF is more reactive than BDFE. Alfrey‐Price's Q and e values of BDFE monomer were calculated to be 0.009 (from Q_VDF = 0.008) or 0.019 (from Q_VDF = 0.015) and +1.22 (vs. e_VDF = 0.40) or +1.37 (vs. e_VDF = 0.50), respectively, indicating that BDFE is an electron‐accepting monomer. Statistic cooligomers were produced with molar masses ranging from 1,800 to 5,500 g/mol (assessed by GPC with polystyrene standards). A further evidence of the successful copolymerization was shown by the selective reduction of bromine atoms in poly(VDF‐co‐BDFE) cooligomers that led to analog PVDF. The thermal properties of the poly(VDF‐co‐BDFE) cooligomers were also determined and those containing a high VDF amount exhibited a high thermal stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3964–3976, 2010.     

Synthesis and polymerization of fluorinated monomers bearing a reactive lateral group 13. Copolymerization of vinylidene fluoride with 2-benzoyloxypentafluoropropene

The synthesis of 2-benzoyloxypentafluoropropene (BPFP) and its radical copolymerization with vinylidene fluoride (VDF), initiated by tert-butyl peroxypivalate is presented. In a first step, the preparation of two monomers [F₂CC(CF₃)OCOR were R stands for CH₃ or C₆H₅] was attempted. In contrast to the acetoxy derivative that could not be isolated, the benzoyl monomer was purified and then copolymerized with VDF. A series of 11 copolymerization reactions was achieved starting from initial [VDF]₀/([BPFP]₀+[VDF]₀) molar ratios ranging from 19 to 99 mol%. The molar compositions of the obtained copolymers were assessed by means of ¹⁹F nuclear magnetic resonance spectroscopy. From the Tidwell and Mortimer method, this kinetics of copolymerization led to the determination of the reactivity ratios, r_i, of both comonomers (r_VDF=0.77±0.40 and r_BPFP=0.11±0.32). Hence, the Alfrey and Price equation enabled one to assess the Q and e parameters of BPFP as follows: 0.019 (from Q_VDF=0.008), 0.043 (from Q_VDF=0.015) or 0.182 (from Q_VDF=0.036) and 1.97 (vs e_VDF=0.40), 2.07 (vs e_VDF=0.50) or 2.77 (vs e_VDF=1.20), respectively. These Q-e parameters and r_i were compared to those of other fluoroalkenes and are discussed.     

Radical copolymerization of vinylidene cyanide with 2,2,2‐trifluoroethyl methacrylate: Structure and characterization

A novel copolymer of vinylidene cyanide (VCN) and 2,2,2‐trifluoroethyl methacrylate (MATRIF) was synthesized by bulk free radical process in a 52% yield from an equimolar comonomer feed. The copolymer's composition and microstructure were analyzed by FTIR, ¹H‐ and ¹³C‐NMR spectroscopy, SEC, and elemental analysis. The reactivity ratios calculated from both the Q‐e Alfrey‐Price parameters and the Jenkins' Patterns Scheme indicate a tendency to alternation in the copolymerization, the latter method suggesting that MATRIF homopropagation be slightly favoured (r_V = r₁₂ = 0.1, r_M = r₂₁ = 0.3). The molar incorporation of VCN in the copolymer was only 42 mol % according to the 9.0 wt % nitrogen content determined by elemental analysis, in good agreement with the value obtained by ¹H‐NMR. High‐resolution ¹H and ¹³C‐NMR spectra were used to study the microstructure of the copolymer. As an example, the three well‐resolved carbonyl resonances in the ¹³C‐NMR spectrum were assigned to the MATRIF‐centered triads VMV, VMM, and MMM, respectively, (V and M stand for VCN and MATRIF, respectively). The presence of VCN dyads (e.g., in VVM and VVV sequences) was shown to be marginal or absent altogether. Thermogravimetric analysis of poly(VCN‐co‐MATRIF) copolymer showed good thermal stability, and its main pyrolytic degradation taking place only above 368 °C. A 4% weight loss at about 222 °C suggested the presence of a few VCN homodyads, possibly inducing thermal depolymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of fluorinated telomers containing vinylidene fluoride and hexafluoropropene from 1,6‐diiodoperfluorohexane

The synthesis of original fluorinated (co)telomers containing vinylidene fluoride (VDF) or VDF and hexafluoropropene (HFP) was achieved by radical telomerizations and (co)telomerizations of VDF (or VDF and HFP) in the presence of 1, 6‐diiodoperfluorohexane via a semisuspension process. tert‐Butyl peroxypivalate (TBPPi) was used as an efficient thermal initiator. The numbers of VDF and VDF/HFP base units in the (co)telomers were determined by ¹⁹F and ¹H NMR spectroscopy. They ranged from 10 to 190 VDF base units. Fluorinated telomers of various molecular weights (1200–12,600 g/mol) were obtained by the alteration of the initial [1,6‐diiodoperfluorohexane]₀/[fluoroalkenes]₀ and [TBPPi]₀/[fluoroalkenes]₀ molar ratios. The thermal properties of these fluorinated (co)telomers, such as the glass‐transition temperature and melting temperature, were examined. As expected, these telomers exhibited good thermal stability. They were stable at least up to 350 °C. The compounds containing more than 30 VDF units were crystalline, whereas all those containing VDF‐co‐HFP were amorphous with elastomeric properties, whatever the number was of the fluorinated base units. The structures of I–(VDF)_n–R_F–(VDF)_m–I and I–(HFP)_x(VDF)_n–R_F–(VDF)_m(HFP)_y–I (co)telomers were obtained, and the defects of the VDF chain and the ? CH₂CF₂I and ? CF₂CH₂I functionalities were studied successfully (where R_F = C₆F₁₂). The functionality in the iodine atoms was modified: the higher the VDF content in the telomers, the lower the normal end functionality (? CH₂CF₂I) and the higher the reversed extremity (? CF₂CH₂I). In addition, the percentage of defects increased when the number of VDF units increased. The molecular weights and molecular weight distributions of different telomers and cotelomers were also studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1470–1485, 2006     

Synthesis and copolymerisation of fluorinated monomers bearing a reactive lateral group : Part 21. Radical copolymerisation of vinylidene fluoride with 2-hydroperfluorooct-1-ene

The synthesis and the radical copolymerisation of 2-hydroperfluorooct-1-ene (HPO) with vinylidene fluoride (VDF), initiated by tertio-butyl peroxypivalate (TBPPI) at 75 °C, are presented. That fluorinated alkene (HPO) was synthesised in two steps starting from the thermal or redox telomerisation of VDF with C₆F₁₃I (after purification of the monoadduct compound by rectification) followed by a dehydroiodination in the presence of various alkalies. Their influences are discussed toward the yield of the reaction. The compositions of the resulting random-type copolymers were calculated by means of ¹⁹F NMR spectroscopy and allowed one to quantify the respective amounts of each monomeric unit in the copolymer. From the Tidwell and Mortimer method, the reactivity ratios (r_i) of both comonomers for this copolymerisation were determined showing a higher incorporation of VDF: r_VDF = 12.0 ± 3.0 and rF₂CCHC₆F13=0.9±0.4 at 74 °C.     

Fluorinated copolymers and terpolymers based on vinylidene fluoride and bearing sulfonic acid side‐group

The radical co‐ and terpolymerization of perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride (PFSVE) with 1,1‐difluoroethylene (or vinylidene fluoride, VDF or VF₂), hexafluoropropene (HFP), chlorotrifluoroethylene (CTFE), and bromotrifluoroethylene (BrTFE) is presented. Although PFSVE could not homopolymerize under radical initiation, it could be copolymerized in solution under a radical initiator with VDF, while its copolymerizations with HFP or CTFE led to oligomers in low yields. The terpolymerizations of PFSVE with VDF and HFP, with VDF and CTFE, or with VDF and BrTFE also led to original fluorinated terpolymers bearing sulfonyl fluoride side‐groups. The conditions of co‐ and terpolymerization were optimized in terms of the nature and the amount of the radical initiators, of the nature of solvents (fluorinated or nonhalogenated), and of the initial amounts of fluorinated comonomers. The different mol % contents of comonomers in the co‐ and terpolymers were assessed by ¹⁹F NMR spectroscopy. A wide range of co‐ and terpolymers containing mol % of PFSVE functional monomer ranging from 10 to 70% was produced. The kinetics of copolymerization of VDF with PFSVE enabled to assess the reactivity ratios of both comonomers: r_VDF = 0.57 ± 0.15 and r_PFSVE = 0.07 ± 0.04 at 120 °C. The thermal and physicochemical properties were also studied. Moreover, the glass transition temperatures (T_gs) of poly(VDF‐co‐PFSVE) copolymers containing different amounts of VDF and PFSVE were determined and the theoretical T_g of poly(PFSVE) homopolymer was deduced. Then, the hydrolysis of the ? SO₂F into ? SO₃H function was investigated and enabled the synthesis of fluorinated copolymers bearing sulfonic acid functions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1814–1834, 2007     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Synthesis and polymerization of fluorinated monomers bearing a reactive lateral group—part 8—study of the tetrafluoroethylene-propylene rubber modification by 4,5,5-trifluoro-4-penten-1-ol as a comonomer

The radical terpolymerization of tetrafluoroethylene (TFE) with propylene (P) and 4,5,5-trifluoro-4-penten-1-ol (FA3) for the synthesis of fluorinated polymers bearing hydroxy side groups is presented. The polymerization was carried out in emulsion and in a batch operation, initiated by a redox system containing tert-butylperoxybenzoate. The reaction proceeded without any induction period and in a stationary state at low conversion (up to 12%). The presence of the trifluorovinyl hydroxy monomer in the ternary system sharply decreased the polymerization rate, in contrast to that of the TFE/P binary one. The order of the reaction about FA3 was 1.25. The terpolymer compositions were determined by elemental analysis by ¹H- and ¹⁹F-NMR spectroscopy. An almost equimolar ratio of TFE and P base units in the terpolymer was found, while the FA3 was inserted between TFE/P blocks. The presence of P increased the polymerization rate and lowered the chain transfer coming from FA3 when compared to the TFE/FA3 binary system. Thermal properties were assessed. The glass transition temperatures (T_g) slightly decreased with the FA3 content. The decomposition temperatures were also affected, showing two steps of decomposition related to the amount of FA3 in the copolymer, and is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3991–3999, 1999     

Synthesis,characterization, thermal properties,and antimicrobial activity of 4‐chloro‐3‐methyl phenyl methacrylate/8‐quinolinyl methacrylate copolymers

4‐Chloro‐3‐methyl phenyl methacrylate (CMPM) and 8‐quinolinyl methacrylate (8‐QMA) were synthesized through the reaction of 4‐chloro‐3‐methyl phenol and 8‐hydroxy quinoline, respectively, with methacryloyl chloride. The homopolymers and copolymers were prepared by free‐radical polymerization with azobisisobutyronitrile as the initiator at 70 °C. Copolymers of CMPM and 8‐QMA of different compositions were prepared. The monomers were characterized with IR spectroscopy and ¹H NMR techniques. The copolymers were characterized with IR spectroscopy. UV spectroscopy was used to obtain the compositions of the copolymers. The monomer reactivity ratios were calculated with the Fineman–Ross method. The molecular weights and polydispersity values of the copolymers were determined with gel permeation chromatography. The thermal stability of the polymers was evaluated with thermogravimetric analysis under a nitrogen atmosphere. The homopolymers and copolymers were tested for their antimicrobial activity againstbacteria, fungi, and yeast. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 157–167, 2005     

Synthesis of functional polymers—Vinylidene fluoride based fluorinated copolymers and terpolymers bearing bromoaromatic side‐group

The radical co‐ and terpolymerization of 4‐[(α,β,β‐trifluorovinyl)oxy]bromo benzene (TFVOBB) with 1,1‐difluoroethylene (or vinylidene fluoride, VDF, or VF₂), hexafluoropropene (HFP), perfluoromethyl vinyl ether (PMVE), and chlorotrifluroroethylene (CTFE) is presented. Although TFVOBB could be thermocyclodimerized, it could not homopolymerize under radical initiation. TFVOBB could be copolymerized in solution under a radical initiator with VDF or CTFE comonomers, while its copolymerization with HFP or PMVE were unsuccessful. The terpolymerization of TFVOBB with VDF and HFP, or VDF and PMVE, or VDF and CTFE also led to original fluorinated terpolymers bearing bromoaromatic side‐groups. The conditions of co‐ and terpolymerization were optimized in terms of the nature of the radical initiators, and of the nature of solvents (fluorinated or nonhalogenated). Various monomer concentrations in the co‐ and terpolymers were assessed by ¹⁹F and ¹H‐NMR spectroscopy. The thermal and physico chemical properties were also studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5077–5097, 2004     

Random and sequential radical cotelomerizations of 3,3,3‐trifluoropropene (H2CCHCF3) with vinylidene fluoride (F2CCH2)

The synthesis of original cotelomers based on 3,3,3‐trifluoropropene (TFP) and vinylidene fluoride (VDF) with a general formula: R_F‐[CH₂? CF₂]_n? [CH₂? CH(CF₃)]_m? I (where n = 1–63, m = 2–640, and R_F = (CF₃)₂CF) was achieved by sequential and random cotelomerizations in the presence of R_FI. The radical cotelomerizations were initiated by thermal decomposition of different peroxide and persulfate initiators either in bulk, in solution (in the presence of acetonitrile or 1,1,1,3,3‐pentafluorobutane as the solvents), and in aqueous process (emulsion). Different adducts were obtained in good yield (50–70 wt %) with a relative proportion of each adduct depending on (i) the R₀ = [R_FI]₀/([TFP]₀+[VDF]₀) initial molar ratio, (ii) the reaction temperature, and (iii) C₀ = [In]₀/([TFP]₀+[VDF]₀). Random cotelomerization gave higher yields than those obtained from the sequential cotelomerization. When the concentration of the chain transfer agent increased, the molecular weights of the resulting poly(VDF‐co‐TFP) cotelomers decreased and showed that the R₀ ratio targeted the molecular weights (～700–66,000 g mol^?1). Some of the obtained molecular weights were exceptionally high for a (co)telomerization. The kinetics of the radical cotelomerization of VDF and TFP led to the determination of the reactivity ratios of both comonomers (r_VDF = 0.28 ± 0.07 and r_TFP = 2.35 ± 0.26 at 75 °C). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3964–3981, 2009     

Synthesis and characterization of copolyperoxides of indene with styrene, α‐methylstyrene,and α‐phenylstyrene

The oxidative copolymerization of indene with styrene, α‐methylstyrene, and α‐phenylstyrene is investigated. Copolyperoxides of different compositions have been synthesized by the free‐radical‐initiated oxidative copolymerization of indene with vinyl monomers. The compositions of the copolyperoxides obtained from the ¹H and ¹³C NMR spectra have been used to determine the reactivity ratios of the monomers. The reactivity ratios indicate that indene forms an ideal copolyperoxide with styrene and α‐methylstyrene and alternating copolyperoxides with α‐phenylstyrene. Thermal degradation studies via differential scanning calorimetry and electron‐impact mass spectroscopy support the alternating peroxide units in the copolyperoxide chain. The activation energy for thermal degradation suggests that the degradation is dependent on the dissociation of the peroxide (? O? O? ) bonds in the backbone of the copolyperoxide chain. Their flexibility has been examined in terms of the glass‐transition temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2004–2017, 2002