Study on the preparation and the self‐assembly of poly(propyleneimine)–poly(styrene) nanoparticles

Using 2‐chloropropionamide derivative of poly(propyleneimine) dendrimer DAB‐dendr‐(NH₂)₃₂ (DAB‐32‐Cl) as the macroinitiator, atom transfer radical polymerization of styrene was successfully carried out in DMF medium. The monodisperse poly(propyleneimine)–polystyrene (dendrimer–PSt) particles with diameters smaller than 100 nm could be prepared. The morphology, size, and size distribution of the dendrimer–PSt particles were characterized by transmission electron microscopy (TEM) and photon correlation spectroscopy (PCS). The effects of reaction temperature, the ratio of St/macroinitiator, and reaction time on the size, and size distribution of the dendrimer–PSt nanoparticles were investigated. In a selective solvent (DMF/H₂O), polymers can self‐assemble into different aggregate configurations such as regular microsphere and wire‐like thread. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2658–2666, 2008     

Branched poly(styrene‐b‐tert‐butyl acrylate) and poly(styrene‐b‐acrylic acid) by ATRP from a dendritic poly(propylene imine)(NH2)64 core

With the aim of creating highly branched amphiphilic block copolymers, the primary amine end groups of the poly(propylene imine) dendrimers DAB‐dendr‐(NH₂)₈ and DAB‐dendr‐(NH₂)₆₄ were converted to 2‐bromoisobutyramide groups. Poly (styrene‐b‐tert‐butyl methacrylate) (PS‐b‐PtBMA) was synthesized by ATRP from the eight end group initiator, and poly(styrene‐b‐tert‐butyl acrylate) (PS‐b‐PtBA) was synthesized from the 64 end group initiator. The tert‐butyl groups were removed to produce poly(styrene‐b‐methacrylic acid) (PS‐b‐PMAA) and poly(styrene‐b‐acrylic acid) (PS‐b‐PAA). Comparison of size exclusion chromatography (SEC) absolute molecular weight analyses of the polystyrenes with calculated molecular weights showed that the eight end group initiator produced a polystyrene with about eight branches, and that the 64 end group initiator produced polystyrene with many fewer than 64 branches. The PS‐b‐PtBA materials also have many fewer than 64 branches. The PS‐b‐PAA samples dissolved molecularly in DMF but formed aggregates in water even at pH 10. AFM images of the PS‐b‐PtBAs spin coated from THF and DMF onto mica showed aggregates. AFM images of the PS‐b‐PAAs spin coated from various mixtures of DMF and water at pH 10 showed flat disks and worm‐like images similar to those observed with linear PS‐b‐PAAs. Use of a PS‐b‐PAA and a PS‐b‐PMAA as templates for emulsion polymerization of styrene produced latexes 100–200 nm in diameter. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4623–4634, 2007     

Quaternary ammonium ion dendrimers from methylation of poly(propylene imine)s

The poly(propylene imine) dendrimers DAB‐dendr‐(NH₂)₈, DAB‐dendr‐(NH₂)₃₂, and DAB‐dendr‐(NH₂)₆₄ were fully converted with iodomethane to quaternary ammonium ions at both chain ends and branch points and, with less iodomethane, were partially converted to quaternary ammonium ions mainly at end groups. Amidation of the primary amine ends followed by treatment with iodomethane gave the first dendrimers with quaternary ammonium ions only at branch points. After an exchange of iodide counterions for chloride, all of the quaternary ammonium ion dendrimers slightly increased the rate of decarboxylation of 6‐nitrobenzisoxazole‐3‐carboxylate ion in an aqueous solution. Similar quaternary ammonium ion dendrimers with more hydrophobic interiors or more hydrophobic chains on the ends were much more active catalysts for the decarboxylation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 821–832, 2001     

Preparation of monodisperse nanoparticles containing poly(propylene imine)(NH2)32‐polystyrene

Polypropylenimine dendrimer (DAB‐Am‐32, generation 4.0) was converted into a macroinitiator DAB‐Am‐32‐Cl via reaction with 2‐chloropropionyl chloride. Monodisperse nanoparticles containing poly(propylene imine)(NH₂)₃₂‐polystyrene were prepared by emulsion atom transfer radical polymerization (ATRP) of styrene (St), using the DAB‐Am‐32‐Cl/CuCl/bpy as initiating system. The structure of macroinitiator was characterized by FTIR spectrum, ¹H NMR, and ¹³C NMR. The structure of poly(propylene imine)(NH₂)₃₂‐polystyrene was characterized by FT‐IR spectrum and ¹H NMR; the molecular weight and molecular weight distribution of poly(propylene imine)(NH₂)₃₂‐polystyrene were characterized by gel permeation chromatograph (GPC). The morphology, size and size distribution of the nanoparticles were characterized by photon correlation spectroscopy (PCS), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The effects of monomer/macroinitiator ratio and surfactant concentration on the size and size distribution of the nanoparticles were investigated. It was found that the diameters of the nanoparticles were smaller than 100 nm (30–80 nm) and monodisperse; moreover, the particle size could be controlled by monomer/macroinitiator ratios and surfactant concentration. With the increasing of the ratio of St/DAB‐Am‐32‐Cl, the number‐average diameter (D_n), weight‐average diameter (D_w) were both increased gradually. With enhancing the surfactant concentration, the measured D_h of the nanoparticles decreased, while the polydispersity increased. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2892–2904, 2009     

Polyelectrolyte behavior and interpolyelectrolyte matching of AstramolTM poly(propylene imine) dendrimers

Polyelectrolyte behavior of Astramol^TM poly(propylene imine) dendrimers of five generations, G1‐G5, namely DAB‐dendr‐(NH₂)_x (where x is equal to 4, 8, 16, 32 or 64) was studied by means of potentiometric titration in salt‐free water solutions and also in the presence of a shielding low molecular electrolyte (NaCI). In addition to x outer primary amine groups the dendrimer molecule contains x‐2 inner tertiary amine groups. The repeating unit, the core molecule and the fifth generation dendrimer structure are shown in the following Scheme.     

Blends of fatty‐acid‐modified dendrimers with polyolefins

Blends were made by solution and melt‐mixing fatty‐acid‐modified dendrimers with various polyolefins. Small‐angle neutron scattering (SANS) was used to determine the miscibility of the blends. Poly(propylene imine) (PPI) dendrimers G1, G3, and G5 [DAB‐dendr‐(NH₂)_y] with y = 4, 16, and 64, were reacted with stearic acid or stearic acid‐d₃₅ forming amide bonds. The modified dendrimers were then blended with high‐density polyethylene (HDPE), high‐density polyethylene‐d₄ (HDPE‐d₄), low‐density polyethylene (LDPE), amorphous polypropylene (PP), or an ethylene–butylene copolymer (E‐co‐B). Limiting power law behavior shows that all of the blends are immiscible. It is likely that the dendrimers form a second phase, being finely dispersed, but thermodynamically immiscible. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 95–100, 2000     

Nanostructured latexes made by a sequential multistage emulsion polymerization

A series of linear and lightly crosslinked nanostructured latices was prepared by a sequential multistage semicontinuous emulsion polymerization process alternating styrene (S) and n‐butyl acrylate (BA) monomer feeds five times, that is ten stages, and vice versa, along with several control latices. Transmission electron micrographs of the RuO₄‐stained cross sections of nanostructured and copolymer latex particles and films showed that their particle morphologies were not very different from each other, but the nanostructured latex particles were transformed into a nanocomposite film containing both polystyrene (PS) and poly(n‐butyl acrylate) (PBA) nanodomains interconnected by their diffuse polymer mixtures (i.e. interlayers). The thermal mechanical behaviors of the nanostructured latex films showed broad but single T_gs slightly higher than those of their counterpart copolymer films. These single T_gs indicated that their major component phases were the diffuse interlayers and that they behaved like pseudopolymer alloys. The minimum film formation temperatures of nanostructured latices capped with PBA and PS, respectively, were 15 °C lower than and equal to those of their counterpart copolymer latices, but their T_gs were about 10 °C higher. Consequently, nanostructured latices enabled us to combine good film formation with high strengths for adhesives and coatings applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2826–2836, 2006     

Interactions and Encapsulation of Vitamins C,B3, and B6 with Dendrimers in Water

Titrations of commercial diaminobutane (DAB) and polyamidoamine (PAMAM) dendrimers by vitamins C (ascorbic acid, AA), B₃ (nicotinic acid), and B₆ (pyridoxine) were monitored by ¹H NMR spectroscopy using the chemical shifts of both dendrimer and vitamin protons and analyzed by comparison with the titration of propylamine. Quaternarizations of the terminal primary amino groups and intradendritic tertiary amino groups, which are nearly quantitative with vitamin C, were characterized by more or less sharp variations (Δδ) of the ¹H chemical shift (δ) at the equivalence points. The peripheral primary amino groups of the DAB dendrimers were quaternarized first, but not selectively, whereas a sharp chemical‐shift variation was recorded for the inner methylene protons near the tertiary amines, thereby indicating encapsulation, when all the dendritic amines were quaternarized. With DAB‐G5‐64‐NH₂, some excess acid is required to protonate the inner amino groups, presumably because of basicity decrease due to excess charge repulsion. On the other hand, this selectivity was not observed with PAMAM dendrimers. The special case of the titration of the dendrimers by vitamin B₆ indicates only dominant supramolecular hydrogen‐bonding interactions and no quaternarization, with core amino groups being privileged, which indicates the strong tendency to encapsulate vitamins. With vitamin B₃, a carboxylic acid, titration of DAB‐G3‐16‐NH₂ shows that only six peripheral amino groups are protonated on average, even with excess vitamin B₃, because protonation is all the more difficult due to increased charge repulsion, as positive charges accumulate around the dendrimer. Inner amino groups interact with this vitamin, however, thus indicating encapsulation presumably with supramolecular hydrogen bonding without much charge transfer.     

Hyperbranched polymers as scaffolds for multifunctional reversible addition–fragmentation chain‐transfer agents: A route to polystyrene‐core‐polyesters and polystyrene‐block‐poly(butyl acrylate)‐core‐polyesters

Polydisperse hyperbranched polyesters were modified for use as novel multifunctional reversible addition–fragmentation chain‐transfer (RAFT) agents. The polyester‐core‐based RAFT agents were subsequently employed to synthesize star polymers of n‐butyl acrylate and styrene with low polydispersity (polydispersity index < 1.3) in a living free‐radical process. Although the polyester‐core‐based RAFT agent mediated polymerization of n‐butyl acrylate displayed a linear evolution of the number‐average molecular weight (M_n) up to high monomer conversions (>70%) and molecular weights [M_n > 140,000 g mol^?1, linear poly(methyl methacrylate) equivalents)], the corresponding styrene‐based system reached a maximum molecular weight at low conversions (≈30%, M_n = 45,500 g mol^?1, linear polystyrene equivalents). The resulting star polymers were subsequently used as platforms for the preparation of star block copolymers of styrene and n‐butyl acrylate with a polyester core with low polydispersities (polydispersity index < 1.25). The generated polystyrene‐based star polymers were successfully cast into highly regular honeycomb‐structured microarrays. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3847–3861, 2003     

Self‐diffusion of styrene, 2,2′‐azobisisobutyronitrile,and polystyrene in bulk polymerization by pulsed‐gradient spin‐echo nuclear magnetic resonance spectroscopy

The self‐diffusion of styrene, polystyrene, and 2,2′‐azobisisobutyronitrile has been determined in the bulk polymerization of styrene with pulsed‐gradient spin‐echo nuclear magnetic resonance at 25 °C. Data on small molecules are discussed with respect to recent diffusion models. They can fit self‐diffusion coefficient data of small molecules in dilute or semidilute polymer solutions; in concentrated solutions, however, there is a breakdown. A semiempirical model based on scaling laws is used to describe the self‐diffusion of styrene and 2,2′‐azobisisobutyronitrile over the whole range of concentrations studied. The dependence of the polystyrene self‐diffusion coefficient on the polymer concentration is described with a stretched exponential function, D = D₀ exp(?αc^ν), where α depends on the molecular weight of the polymer and ν depends on the kind of solvent. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1605–1614, 2003     

Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007     

Synthesis of high molecular weight polymer nanoparticles by [Cp2ZrCl2] catalyzed emulsion polymerization

An early transition metal metallocene compound, Cp₂ZrCl₂, with an anionic surfactant, sodium n‐dodecyl sulfate (SDS) as emulsifier and NaBPh₄ as cocatalyst has been found to be an effective catalytic system for polymerization and copolymerization of monomers like styrene and methyl methacrylate in aqueous medium. The diameters of the latex particles were found to be in between 20 and 40 nm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

An iminophosphine dendrimeric ligand and its evaluation in the Heck reaction

DAB-dendr-(NH₂)₃₂ has been modified to produce two novel dendrimeric P,N-ligands, DAB-dendr-[1,2-(NCHC₆H₄PPh₂)]₃₂ and DAB-dendr-[1,2-(NHCH₂C₆H₄PPh₂)]₃₂. These were both found to activate electron rich aryl bromides in the Heck reaction. The reactions seem to proceed better in a novel solvent system consisting of an equimolar mixture of a tertiary amine with acetic acid. A marked dependence of the conversion on the [equivalents of dendrimeric ligand]/[Pd] ratio has been observed with conversion decreasing as the ratio of dendrimer equivalents to Pd increases. This phenomenon is attributed to interactions of the arms bearing the metal with neighboring ones within the dendrimer.     

Hybrid polystyrene based electrospun fibers with spin‐crossover properties

We have succeeded in the preparation of electrospun fibers of polystyrene incorporating a metallo‐organic polymer of [Fe (II) (4‐octadecyl‐1,2,4‐triazole)₃(ClO₄)₂]n. The obtained fibers have diameters in the range 2–4 µm and show the characteristic spin‐crossover transition associated with the metallo‐organic polymer. The structure of both, polystyrene and the metallo‐organic polymer, in the fibers was also studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 814–821     

Divergent synthesis of dendrimer‐like macromolecules through a combination of atom transfer radical polymerization and click reaction

This article describes a divergent strategy to prepare dendrimer‐like macromolecules from vinyl monomers through a combination of atom transfer radical polymerization (ATRP) and click reaction. Firstly, star‐shaped polystyrene (PS) with three arms was prepared through ATRP of styrene starting from a three‐arm initiator. Next, the terminal bromides of the star‐shaped PS were substituted with azido groups. Afterwards, the azido‐terminated star‐shaped PS was reacted with propargyl 2,2‐bis((2′‐bromo‐2′‐methylpropanoyloxy)methyl)propionate (PBMP) via click reaction. Star‐shaped PS with six terminal bromide groups was afforded and served as the initiator for the polymerization of styrene to afford the second‐generation dendrimer‐like PS. Iterative process of the aforementioned sequence of reactions could allow the preparation of the third‐generation dendrimer‐like PS. When the second‐generation dendrimer‐like PS with 12 bromide groups used as an initiator for the polymerization of tert‐butyl acrylate, the third‐generation dendrimer‐like block copolymer with a PS core and a poly (tert‐butyl acrylate) (PtBA) corona was afforded. Subsequently PtBA segments were selectively hydrolyzed with hydrochloric acid, resulting an amphiphilic branched copolymer with inner dendritic PS and outer linear poly(acrylic acid) (PAA). Following the same polymerization procedures, the dendrimer‐like PS and PS‐block‐PtBA copolymers of second generation originating from six‐arm initiator were also synthesized. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3330–3341, 2007     

Synthesis,characterization, and fluorescence of pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer with pentaerythritol core

Novel and well‐defined pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymers were successfully achieved by combination of esterification, atom transfer radical polymerization (ATRP), divergent reaction, ring‐opening polymerization (ROP), and coupling reaction on the basis of pentaerythritol. The reaction of pentaerythritol with 2‐bromopropionyl bromide permitted ATRP of styrene (St) to form four‐arm star‐shaped polymer (PSt‐Br)₄. The molecular weights of these polymers could be adjusted by the variation of monomer conversion. Eight‐hydroxyl star‐shaped polymer (PSt‐(OH)₂)₄ was produced by the divergent reaction of (PSt‐Br)₄ with diethanolamine. (PSt‐(OH)₂)₄ was used as the initiator for ROP of ε‐caprolactone (CL) to produce eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL)₂)₄. The molecular weights of (PSt‐b‐(PCL)₂)₄ increased linearly with the increase of monomer. After the coupling reaction of hydroxyl‐terminated (PSt‐b‐(PCL)₂)₄ with 1‐pyrenebutyric acid, pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL‐pyrene)₂)₄ was obtained. The eight‐arm star‐shaped dendrimer‐like copolymers presented unique thermal properties and crystalline morphologies, which were different from those of linear poly(ε‐caprolactone) (PCL). Fluorescence analysis indicated that (PSt‐b‐(PCL‐pyrene)₂)₄ presented slightly stronger fluorescence intensity than 1‐pyrenebutyric acid when the pyrene concentration of them was the same. The obtained pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer has potential applications in biological fluorescent probe, photodynamic therapy, and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2788–2798, 2008     

Polymeric nanocomposite comprising gold nanoparticles and bilaterally sulfur‐functionalized polystyrene

Anionic polymerization technique has been utilized to synthesize a bilaterally sulfur‐functionalized polystyrene, SCH3‐polystyrene‐SH. The synthesis scheme consists of (1) initiation of 4‐vinylbenzylmethyl sulfide with sec‐butyllithium to form a living sulfur‐containing initiator, (2) polymerization of styrene, and (3) termination of growing polystyrene chain with ethylene sulfide. The resulting bilaterally sulfur‐functionalized polystyrene is used to make polystyrene/gold nanoparticles (AuNPs) nanocomposite with AuNPs formed in situ in polymer solution through reduction of AuClO₄. The effects of the polymer/Au molar ratio as well as the molecular weight of polymer on the size and dispersion of formed AuNPs have been studied, and the superiority of bilaterally functionalized polymer to unilaterally functionalized polymer has been demonstrated. The polystyrene/AuNPs composite has been characterized by GPC, ¹H‐NMR, ¹³C‐NMR, EDS, TEM, UV‐Vis, and DSC. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1268–1277     

Membrane osmometer for use at moderate applied pressures

A membrane osmometer designed for use at pressures greater than 0.1 MPa and less than 6 MPa was employed to determine the pressure coefficient of the equilibrium osmotic pressure (?π/?P) of a dilute polystyrene/toluene solution. The pressure coefficient of the second virial coefficient (?A₂/?P), calculated from ?π/?P, was 6 (±4) × 10^?5 cm³ mol g^?2 MPa^?1, which was in reasonable agreement with the value obtained from pressure‐dependent light scattering. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3064–3069, 2003     

Electric,dielectric, and dynamic mechanical behavior of carbon black/styrene‐butadiene‐styrene composites

The conductivity of styrene‐butadiene‐styrene block copolymers containing different amounts of extraconductive carbon black (CB) was investigated as a function of the mold temperature. The composites exhibited reduced percolation thresholds (between 1.0 and 2.0 vol % CB). The dynamic mechanical analysis characterization revealed that the glass‐rubber‐transition temperatures of both segments were not affected by the CB addition, although the damping of the polybutadiene phase displayed a progressive drop with an increase in the CB concentration. The normalized curves of tan δ/tan δ_max (where tan δ represents the value of the loss tangent at any measurement temperature and tan δ_max represents the loss tangent peak value at the corresponding temperature T_max) versus T/T_max (where T is the temperature and T_max is the maximum temperature), corresponding to both polystyrene and polybutadiene phases as well as the activation energy related to the glass‐rubber‐transition process, did not present any significant change with the addition of CB. The dielectric analysis revealed the presence of two relaxation peaks in the composite containing 1.5 vol % CB, the magnitude of which was strongly influenced by the frequency, being attributed to interfacial Maxwell‐Wagner‐Sillars relaxations caused by the presence of different interfaces in the composite. The mechanical properties were not affected by the presence of CB at concentrations of up to 2.5 vol %. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2983–2997, 2003     

Star‐shaped polystyrenes with glycoconjugated periphery and interior: Synthesis and entrapment of hydrophilic molecule

Star‐shaped polystyrenes with acetyl glucose in the periphery and interior were synthesized via two‐steps, 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO)‐mediated living radical polymerizations. In the first step, styrene (St) was polymerized with 4‐[1′‐(2″,2″,6″,6″‐tetramethyl‐1″‐piperidinyloxy)ethyl]phenyl 2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐glucopyranoside, 1 , at 120 °C to afford a TEMPO‐terminated polystyrene with acetyl glucose in the chain‐end, arm‐polymer 2 . Similarly, St was polymerized with 1‐phenyl‐1‐(2′,2′,6′,6′‐tetramethyl‐1′‐piperidinyloxy)ethane, 3 , to obtain a TEMPO‐terminated polystyrene, arm‐polymer 4 . In the second step, the coupling reaction of arm‐polymer 2 was performed using divinylbenzene (DVB) as a linking agent in m‐xylene at 138 °C, giving a star‐shaped polystyrene with acetyl glucose in the periphery, 5 . The coupling reaction of arm‐polymer 4 with DVB was carried out in the presence of 1 , which produced a star‐shaped polystyrene with acetyl glucose in the interior, 6 . Dynamic laser light scattering (DLS) measurements indicated that 5 and 6 existed as the particles in toluene with the average diameters ranging from 12–40 nm. The numbers of the arm (N_arm) were 12–23 and 6–64 for 5 and 6 , respectively, which were determined by their isolated yields and static laser light scattering (SLS) measurements. The numbers of the acetyl glucose units (N₁) were 12–23 and 9–104 for 5 and 6 , respectively, which were determined from specific rotation ([α]₃₆₅). Finally, 5 and 6 were modified by deacetylation using sodium methoxide, producing star‐shaped polystyrenes with glucose in the periphery and interior, 7 and 8 , respectively. The final architectures were found to entrap a hydrophilic molecule at their glycoconjugated periphery or interior in good solvents for polystyrene such as chloroform. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4373–4381, 2005