Preparation and characterization of multifunctional maleimide macromonomers and their cured resins

Multifunctional compounds with pendent and terminal maleimide groups were prepared through the reaction of 4‐maleimidobenzoic acid and 5‐maleimidoisophthalic acid with diglycidyl ether of bisphenol A. The ratios of the pendent maleimide groups to the terminal maleimide groups in the obtained compounds were varied to tailor the chain length and properties of the maleimide compounds. The maleimide group ratios, determined from differential scanning calorimetry, showed good coincidence with the values calculated from the charged monomer amounts. The good solubility and low softening points of the maleimide compounds indicated their good processability. High glass‐transition temperatures (220 °C) were observed for the cured resins because of the relatively high crosslinking density. The curing reaction, thermal stability, and degradation behavior of the resins were also studied with differential scanning calorimetry and thermogravimetric analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3178–3188, 2004     

Biobased polyurethanes from polyether polyols obtained by ionic‐coordinative polymerization of epoxidized methyl oleate

A series of poly(ether urethane) networks were synthesized from polyether polyols obtained by ionic‐coordinative polymerization of epoxidized methyl oleate (EMO) using 4,4′‐methylenebis(phenyl isocyanate) or l ‐lysine diisocyanate as coupling agents. Moreover, a variety of segmented poly(ether urethane) networks with different hard segment contents were obtained using 1,3‐propanediol as the chain extender. The materials were characterized by differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical thermal analysis, and tensile properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Phenol‐urea‐formaldehyde cocondensed resol resins: Their synthesis,curing kinetics,and network properties

Several phenol‐urea‐formaldehyde (PUF) cocondensed resol resins were synthesized by different procedures. The curing kinetics and network properties of these PUF resins were examined by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). A kinetic study indicated that the activation energy values of PUF resins are generally higher than those of phenol‐formaldehyde (PF) resins during curing processes, but the curing rates of PUF resins are faster than those of PF resins. The pH values of PUF systems have a significant influence on the rate constants, although they affect the activation energy very slightly. Moreover, the dependence of activation energy on the conversion showed that there are more individual reactions with different activation energies occurring during the curing processes in PUF resins than in PF resins. The decomposition of methylene ether bridges to form methylene bridges probably occurs at high temperature in PUF resins. DMTA data indicated that the network rigidity of PUF resins is slightly lower than that of PF resin. The gel point and T_{tan δ2} transition measured by DMTA were consistent with the kinetic results obtained from the DSC data, but they were also related to the physical and mechanical properties of the network, especially with regard to the T_{tan δ2} transition. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1929–1938, 2003     

Synthesis and characterization of poly(arylene ether)s derived from 4,4′‐bishydroxybiphenyl and 4,4′‐bishydroxyterphenyl

A series of poly(arylene ether)s were successfully prepared by aromatic, nucleophilic substitution reactions with various perfluoroalkyl‐activated bisfluoromonomers with 4,4′‐bishydroxybiphenyl and 4,4′‐bishydroxyterphenyl. 4,4′‐Bishydroxyterphenyl was synthesized through the Grignard coupling reaction of magnesium salt of 4‐bromoanisole with dibromobenzene followed by demethylation with pyridine–hydrochloride. The products obtained by the displacement of fluorine atoms exhibited good inherent viscosity, up to 0.77 dL/g, and number‐average molecular weights up to 69,300. These poly(arylene ether)s showed very good thermal stability, up to 548 °C for 5% weight loss according to thermogravimetric analysis under synthetic air, and high glass‐transition temperatures, up to 259 °C according to differential scanning calorimetry, depending on the exact repeat unit structure. These polymers were soluble in a wide range of organic solvents, such as N‐methylpyrrolidone, dimethylformamide, tetrahydrofuran, toluene, and CHCl₃, and were insoluble in dimethyl sulfoxide and acetone. Thin films of these poly(arylene ether)s showed good transparency and exhibited tensile strengths up to 132 MPa, moduli up to 3.34 GPa, and elongations at break up to 84%, depending on their exact repeating unit structures. These values are comparable to those of high‐performance thermoplastic materials such as poly(ether ether ketone) (PEEK) and Ultem poly(ether imide) (PEI). These poly(arylene ether)s exhibited low dielectric constants. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 55–69, 2002     

Synthesis and characterization of halogen‐containing poly(ether ketone ketone)s

A series of novel poly(ether ketone ketone)s (PEKKs) were synthesized from diphenyl ether and isophthaloyl chloride derivatives such as 5‐halo‐ and 5‐tert‐butyl‐isophthaloyl chloride. The aromatic electrophilic substitution route to polyketones was a convenient route for the preparation of the polymers in high yields via precipitation polycondensation at a low temperature with aluminum trichloride as a catalyst. High molecular weight PEKKs were achieved with number‐average molecular weights of 15,000–100,000 g/mol for polymers that showed good solubility in organic solvents. The presence of substituents greatly modified the spectroscopic features in comparison with those of unsubstituted isophthaloyl poly(ether ketone ketone)s, particularly for the series containing halogens, for which significant variations of the chemical shifts in both ¹H and ¹³C NMR spectra were observed; these shifts could be related to the nature of the halogen. Thermal properties were also affected by the presence of pendent substituents, with clear enhancements of the glass‐transition temperatures, which could be ascribed to the nature and bulkiness of the substituents. Thermogravimetric analyses showed that the new polymers had good thermal resistance, although an important drop in thermal resistance was observed for polymers bearing large halogen atoms, such as bromine and iodine. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2601–2608, 2002     

Isothermal melt and cold crystallization kinetics of poly(aryl ether ketone ether ketone ketone)

The isothermal melt and cold crystallization kinetics of poly(aryl ether ketone ether ketone ketone) are investigated by differential scanning calorimetry over two temperature regions. The Avrami equation describes the primary stage of isothermal crystallization kinetics with the exponent n ≈ 2 for both melt and cold crystallization. With the Hoffman–Weeks method, the equilibrium melting point is estimated to be 406 °C. From the spherulitic growth equation proposed by Hoffman and Lauritzen, the nucleation parameter (K_g) of the isothermal melt and cold crystallization is estimated. In addition, the K_g value of the isothermal melt crystallization is compared to those of the other poly(aryl ether ketone)s. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1992–1997, 2000     

Hydrogen-bonded supramolecular poly(ether ketone)s

The preparation of 2,4-diamino-1,3,5-triazine telechelic poly(ether ketone)s (triazine PEKs) and the formation of supramolecular polymers with dodecyl-(α-ω)-bis(5-methyl-1,3-pyrimidine-2,4-dione) were investigated. Both structures interacted by complementing hydrogen-bonding units present at their respective chain ends, this being reminiscent of triple hydrogen bonding in DNA. The preparation of the triazine PEKs started from hydroxyl-terminated poly(ether ketone)s by a nucleophilic displacement reaction with 2,4-diamino-6-(4-fluorophenyl)-1,3,5-triazine. With this method and molecular weight control via the Carothers equation, a series of triazine PEKs with a complete degree of end-group functionalization were prepared. The structure of the polymers was proven by ¹³C NMR spectroscopy and matrix-assisted laser desorption/ionization spectroscopy. When mixed as a 1:1 complex in solution with dodecyl-(α-ω)-bis(5-methyl-1,3-pyrimidine-2,4-dione), short triazine PEKs (molecular weight = 5700 or 10,000) showed a temperature-dependent association behavior visible via dynamic NMR spectroscopy. Additional proof of the formation of a supramolecular, hydrogen-bonded network was derived from solid-state NMR spectroscopy, differential scanning calorimetry, and rheological investigations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 661–674, 2004     

Curing studies of epoxy resins with phosphorus‐containing amines

The curing system of diglycidyl ether of bisphenol A (DGEBA) with two phosphorus‐containing amine compounds—bis(3‐aminophenyl)methyl phosphine oxide and bis(4‐aminophenyl)‐bis(9,10‐dihydro‐9‐oxa‐10‐oxide‐10‐phosphaphenanthrene‐10‐yl)methane—was studied with differential scanning calorimetry under isothermal and nonisothermal conditions and compared with the DGEBA/diamino diphenyl methane system. The isoconversional method was used to evaluate the dependence of the effective activation energy on the extent of conversion. Modulated differential scanning calorimetry and dynamic mechanical thermal analysis were used to study the phenomena of vitrification and gelation. The thermal and flame‐retardant properties were evaluated, and the limiting oxygen index values of the phosphorylated resins, above 30, confirmed that phosphorus‐containing epoxy resins are effective flame retardants. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1676–1685, 2006     

Synthesis and thermal properties of poly(arylene ether ketone)s containing phthalazinone moieties

A series of novel poly(arylene ether ketone)s were synthesized from the reaction of hydroquinone and 4-(4-hydroxyphenyl)-2,3-phthalazin-1-one with 4,4′-difluorobenzophenone in N-cyclohexylpyrrolidinone containing anhydrous potassium carbonate. The polymers exhibited high glass transition temperatures together with excellent thermooxidative stability. The chain structure of these polymers was studied by means of differential scanning calorimetry (DSC), wide-angle X-ray diffraction techniques (WAXD), and matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF-MS). The experimental results indicated that these “as-made” copoly(aryleneketone)s containing hydroquinone moieties exhibited a block chain structure with segments which mainly consisted of hydroquinone and 4,4′-difluorobenzophenone. These chain segments resulted in crystallites in the polymers although they are thermodynamically unstable. The polymers showed thermal properties comparable to commercial PEEK, but the conditions for synthesis are much milder. The glass transition temperatures and solubilities of the copoly(arylene ketone)s tended to increase with increasing phthalazinone moiety content, while the crystallite melting points and crystallinity appeared to decrease. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1781–1788, 1999     

Synthesis and characterization of soluble copoly(ether ketone)s containing double bonds

A series of copoly(ether ketone)s containing double bonds along the polymer chains were synthesized from the condensation polymerization of hydroquinone with 4,4′‐difluorobenzophenone and 4,5‐bis(4‐fluorobenzoyl)‐1‐methylcyclohexene in sulfolane containing anhydrous potassium carbonate. The presence of methylcyclohexene in the polymer chains resulted in an improvement in the solubility of poly(ether ketone)s in organic solvents such as chloroform, chlorobenzene, and sulfolane. As a result, the conditions for synthesizing these polymers were much milder than those for poly(ether ether ketone). The new copoly(ether ketone)s also showed good tensile properties and reasonable thermal stability. New polyethers containing pyrazine unites were obtained from the cyclization reaction of these copoly(ether ketone)s with hydrazine. The hydrazine cycloderivatives led to an increase in the glass‐transition temperatures and a decrease in solubility in organic solvents. © 2002 Government of Canada. Exclusive world‐wide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3449–3454, 2002     

Polymer-polymer miscibility in blends of a new poly(aryl ether ketone) with poly(ether imide)

Polymer miscibility was found for a blend system comprising of a new poly(aryl ether ketone) and a poly(ether imide). Phase homogeneity was preliminarily confirmed using optical and scanning electron microscopy, indicating that the scales of phase homogeneity in the blends were beyond the resolution limits of either microscopy. A composition-dependent, single glass transition temperature (T_g) in the PAEK/PEI blends within the full range of composition was observed using differential scanning calorimetry (DSC). The thermal transition breadth also suggests that the scales of mixing are fine and uniform.     

Using diethylphosphites as thermally latent curing agents for epoxy compounds

Diethylphosphite (DEP) and its derivative exhibited thermally latent properties for epoxy curing reactions through the formation of phosphonic acid as an active species from a reaction of ethanol elimination, which was observed with ¹H NMR and pyrolysis gas chromatography/mass spectrometry measurements. The thermally latent properties and curing reaction kinetics of the curing reaction of DEPs with diglycidyl ether of bisphenol A were studied with differential scanning calorimetry. The cured epoxy resins possessed a phosphorous element coming from the DEP derivatives, exhibiting improved flame retardancy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 432–440, 2003     

Synthesis and properties of new adamantane‐based poly(ether imide)s

A new adamantane‐based bis(ether anhydride), 2,2‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]adamantane dianhydride, was prepared in three steps starting from nitrodisplacement of 4‐nitrophthalonitrile with the potassium phenolate of 2,2‐bis(4‐hydroxyphenyl)adamantane. A series of adamantane‐containing poly(ether imide)s were prepared from the adamantane‐based bis(ether anhydride) and aromatic diamines by a conventional two‐stage synthesis in which the poly(ether amic acid)s obtained in the first stage were heated stage‐by‐stage at 150–270°C to give the poly(ether imide)s. The intermediate poly(ether amic acid)s had inherent viscosities between 0.56 and 1.92 dL/g. Except for those from p‐phenylenediamine, m‐phenylenediamine, and benzidine, all the poly(ether amic acid) films could be thermally converted into transparent, flexible, and tough poly(ether imide) films. All the poly(ether imide)s showed limited solubility in organic solvents, although they were amorphous in nature as evidenced by X‐ray diffractograms. Glass transition temperatures of these poly(ether imide)s were recorded in the range of 242–317°C by differential scanning calorimetry and of 270–322°C by dynamic mechanical analysis. They exhibited high resistance to thermal degrdation, with 10% weight loss temperatures being recorded between 514–538°C in nitrogen and 511–527°C in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1619–1628, 1999     

Fully aromatic poly(ether ketone)s bearing macrocycle pendants: Synthesis and crosslinking

This study reports a method to prepare fully aromatic poly(ether ketone) thermosets. The cyclization of 2′,5′‐dimethoxy[1,1′‐biphenyl]‐2,5‐diol and a difluoro monomer was carried out under pseudo high dilution condition. Two types of fully aromatic poly(ether ketone)s with macrocycle were successfully prepared by copolymerization of macrocycle of aryl ether ketone containing hydroxyphenyl groups, 4,4′‐(hexafluoroisopropylidene)diphenol (HFBPA), and 4,4‐difluorobenzophenone. The obtained copolymers have high molecular mass, good solubility, and high glass transition temperatures in the presence of CsF, the crosslinking reaction of copolymers occurred and afforded fully aromatic thermoset poly(aryl ether ketone)s by ring‐opening reaction driven by entropy. After crosslinking, these copolymers show much higher glass transition temperatures, excellent thermal stability, and better mechanical strength. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7002–7010, 2008     

Preparation and characterization of crosslinked poly(N,N‐diethylacrylamide‐co‐2‐hydroxyethyl methacrylate) resins and their application as support in solid‐phase peptide synthesis

Novel hydrophilic and thermosensitive poly(N,N‐diethylacrylamide‐co‐2‐hydroxyethyl methacrylate) resins were prepared by inverse suspension polymerization with N,N′‐methylenebis(acrylamide) as a crosslinker. The effects of chemical composition and degree of crosslinking on the polymerization were investigated. The polymer resins were characterized by elemental analysis, infrared spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The thermosensitivity of the crosslinked resins was demonstrated by their lower critical swelling temperatures. The swelling and deswelling volume of the beads in water varied depending on the molar fraction of the N,N‐diethylacrylamide. These beads swelled extensively in a variety of common solvents. They had high loadings of functional hydroxyl groups and were used as supports in the solid‐phase synthesis of an oligopeptide. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1681–1690, 2003     

Synthesis and properties of poly(ether imide)s based on a benzonorbornane bis(ether anhydride)

A novel bis(ether anhydride) monomer, 3,6‐bis(3,4‐dicarboxyphenoxy)benzonorbornane dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile with 3,6‐dihydroxybenzonorbornane in the presence of potassium carbonate, followed by the alkaline hydrolysis of the intermediate bis(ether dinitrile) and the cyclodehydration of the resulting bis(ether diacid). A series of poly(ether imide)s bearing pendant norbornane groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were 0.81–1.81 dL/g. The poly(ether imide) with m‐phenylenediamine as a diamine showed good organosolubility. Most of the cast poly(ether imide) films have had high tensile strengths and moduli. The glass‐transition temperatures of these poly(ether imide)s, except for those from rigid p‐phenylenediamine and benzidine, were recorded between 211 and 246 °C by differential scanning calorimetry. The softening temperatures of all the poly(ether imide) films stayed within 210–330 °C according to thermomechanical analysis. No polymers showed significant decomposition before 500 °C in a nitrogen or air atmosphere. A comparative study of the properties with the corresponding poly(ether imide)s without pendant substituents was also made. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1712–1725, 2002     

PPEKK/PEI共混物的相容性及拉伸性能

作为相容体系 ,聚芳醚酮与聚醚酰亚胺 (ＰＥＩ)共混物体系的研究受到了研究者的重视[1～ 4] .由于现在已商品化的聚芳醚酮基本上都是半结晶型聚合物 ,所以有有关无定型聚芳醚酮与聚醚酰亚胺共混物的研究鲜见报道 .含二氮杂萘酮结构聚芳醚酮酮 (ＰＰＥＫＫ)是一种新型耐高温聚合物 ,相比于已经商品化的各种聚芳醚酮 ,ＰＰＥＫＫ除具有优异的综合性能外 ,它最大的特点表现在以下两方面 ,ＰＰＥＫＫ耐热性突出 ,玻璃化转变温度 (Ｔｇ)为 2 4 5℃左右 ,远高于各种商品化的聚芳醚酮 ;ＰＰＥＫＫ为无定型聚合物 ,易溶于多种有机极性溶剂 ,大大的扩…     

Dimeric liquid‐crystalline epoxyimine monomers: Influence of dipolar moments on mesomorphic behavior and the formation of liquid‐crystalline thermosets

We examine some of the structural aspects that influence the mesomorphic behavior of liquid‐crystalline dimeric epoxy resins with imine groups in the mesogens. We synthesized two new series of monomers and compared them with previously synthesized monomers. Compared with previously studied series, the imine group in the new monomers is oriented differently with respect to the ether and ester groups linked to the end of the mesogenic unit. Our results confirmed the importance of polarization of the mesogenic groups and the presence of an ester group in the inner position in the formation of smectic mesophases. By curing with primary and tertiary amines, we demonstrate that these two requirements are necessary if liquid‐crystalline thermosets are to be obtained with different degrees of order. These studies were carried out with differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1465–1477, 2003     

Relationship between molecular structure and thermal properties of poly(aryl ether ketone)s

Five kinds of poly(aryl ether ketone)s (PAEKs) having para-substituted linear molecular chains were synthesized via nucleophilic substitution reaction of the corresponding difluoro- and dihydroxy-compounds. The glass transition temperature and melting temperature of the PAEKs measured through differential scanning calorimetry in addition to those of other PAEKs reported are approximately proportional to the logarithm of the ratio of the mole fractions of ketone and ether groups in the repeating unit of the PEAKs. On the other hand, this ratio does not affect the crystal structure of the PAEKs.     

Synthesis,characterization, and photoreaction of photoreactive liquid crystalline block copolyetheresters

Photo-crosslinkable thermotropic liquid crystalline block copolyetheresters with photoreactive hard segment of poly(hexamethylene p-phenylenediacrylate) and soft segment of poly(tetramethylene ether) were synthesized by melt polycondensation from n-butyl-p-phenylenediacrylate, hexamethylene glycol, and poly(tetramethylene ether) glycol (PTMG, M_n = 1000–3000). The influence of molecular weight and composition of PTMG unit on the thermal behavior was determined by differential scanning calorimetry and polarized optical microscopy. All synthesized block copolymers show thermotropic liquid crystalline phase and can photo-crosslink by UV irradiation. Photoreaction of the copolymer thin film was carried out using Hg-UV light and investigated by FT–IR spectroscopy and a dynamic viscoelastic analyzer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1849–1855, 1997