Synthesis of poly(2‐ethylhexyl acrylate)/clay nanocomposite by in situ living radical polymerization

This investigation reports the preparation of tailor‐made poly(2‐ethylhexyl acrylate) (PEHA) prepared via in situ living radical polymerization in the presence of layered silicates and characterization of this polymer/clay nanocomposite. Being a low T_g (?65 °C) material, PEHA has very good film formation property for which it is used in paints, adhesives, and coating applications. 2‐Ethylhexyl acrylate was polymerized at 90 °C using CuBr and Cu(0) as catalyst in combination with N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. A tremendous enhancement in reaction rate and polymerization data was achieved when acetone was added as additive to increase the efficiency of the catalyst system. PEHA/clay nanocomposite was prepared at 90 °C using CuBr as catalyst in combination with PMDETA as ligand. Different types of clay with same loading were also used to study the effect on reaction rate. The molecular weight (M_n) and polydispersity index of the prepared nanocomposites were characterized by size exclusion chromatography. The active end group of the polymer chain was analyzed by ¹H NMR analysis and by chain extension experiment. Polymer/clay interaction was studied by Fourier Transform Infrared spectrometry and wide‐angle X‐ray diffraction analyses. Distribution of clay in the polymer matrix was studied by the transmission electron microscopy. Thermogravimetric analysis showed that thermal stability of PEHA/clay nanocomposite increases on addition of nanoclay. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polymerization of 2‐hydroxyethyl acrylate in bulk and solution by chemical initiator and by ATRP method

In this study, 2‐hydroxyethyl acrylate (HEA) was polymerized to obtain polymers that can be used as hydrogel and copolymerized for biomedical applications. Bulk, solution, and atom transfer radical polymerization (ATRP) techniques at different temperatures were applied. The polymerization in bulk form was carried out in vacuum and in open atmosphere. The polymerization curves showed autoacceleration mechanism and the limiting conversion was 100%. The polymers obtained were insoluable in most common solvents because of high molecular weights and strong intermolecular hydrogen bonding. They absorb more than 30% (w/w) water as hydrogel. To decrease the molecular weight and obtain soluble polymers, HEA was polymerized in solution by ATRP method, which also gave insoluble hydrogel type polymers. The activation energy for bulk polymerization was 155.8 kJ/mol, which is very high for a free radical polymerization. This is due to the high degree of intermolecular hydrogen bonding, which was also supported by FTIR and TGA analysis. The polymers were characterized by FT‐IR, DSC, TGA, and ¹H NMR techniques. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3957–3965, 2005     

Copper catalyzed atom transfer radical copolymerization of glycidyl methacrylate and 2‐ethylhexyl acrylate

This investigation reports the atom transfer radical copolymerization (ATRcP) of glycidyl methacrylate (GMA) and 2‐ethylhexyl acrylate (EHA). Poly(glycidyl methacrylate) (PGMA) has easily transformable pendant oxirane group and poly(2‐ethylhexyl acrylate) (PEHA) has very low T_g. They are the important components of coating and adhesive materials. Copolymerization of GMA and EHA was carried out in bulk and in toluene at 70 °C at different molar feed ratios using CuCl as catalyst in combination with 2,2′‐bypyridine (bpy) as well as N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. The molecular weight (M_n) and the polydispersity index (PDI) of the polymers were determined by GPC analysis. The molar composition of the copolymers was determined by ¹H NMR analysis. The reactivity ratios of GMA (r₁) and EHA (r₂) were determined using Finemann‐Ross and Kelen‐Tudos linearization methods and those had been compared with the literature values for conventional free radical copolymerization. The thermal properties of the copolymers were studied by DSC and TGA analysis. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6526–6533, 2009     

Polymerization of acrylates by atom transfer radical polymerization. Homopolymerization of 2-hydroxyethyl acrylate

The application of atom transfer radical polymerization (ATRP) to the homopolymerization of 2-hydroxyethyl acrylate, a functional monomer, is reported. The polymerizations exhibit first-order kinetics, and molecular weights increase linearly with conversion. Polydispersities remain low throughout the polymerization (M_w/M_n ≈ 1.2). Reactions were conducted in bulk and in 1 : 1 (by volume) aqueous solution; the latter demonstrates the resilience of ATRP to protic media. Analysis of poly(2-hydroxyethyl acrylate) by MALDI-MS and ¹H-NMR shows M_n,exp to be much closer to M_n,th than those observed by SEC using polystyrene standards. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1417–1424, 1998     

Emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate and methyl methacrylate

The emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate (EHMA) and methyl methacrylate (MMA) was carried out with the bifunctional initiator 1,4‐butylene glycol di(2‐bromoisobutyrate). The system was mediated by copper bromide/4,4′‐dinonyl‐2,2′‐bipyridyl and stabilized by polyoxyethylene sorbitan monooleate. The effects of the initiator concentration and temperature profile on the polymerization kinetics and latex stability were systematically examined. Both EHMA homopolymerization and successive copolymerization with MMA proceeded in a living manner and gave good control over the polymer molecular weights. The polymer molecular weights increased linearly with the monomer conversion with polydispersities lower than 1.2. A low‐temperature prepolymerization step was found to be helpful in stabilizing the latex systems, whereas further polymerization at an elevated temperature ensured high conversion rates. The EHMA polymers were effective as macroinitiators for initiating the block polymerization of MMA. Triblock poly(methyl methacrylate–2‐ethylhexyl methacrylate–methyl methacrylate) samples with various block lengths were synthesized. The MMA and EHMA reactivity ratios determined by a nonlinear least‐square method were ～0.903 and ～0.930, respectively, at 70 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1914–1925, 2006     

Synthesis of poly(2‐methoxyethyl acrylate) by single electron transfer—Degenerative transfer living radical polymerization catalyzed by Na2S2O4 in water

Living radical polymerization of 2‐methoxyethyl acrylate (MEA) was achieved by single‐electron‐transfer/degenerative transfer mediated living radical polymerization (SET‐DTLRP) in water catalyzed by sodium dithionate. The poly(2‐methoxyethyl acrylate) is an amphiphilic polymer with a hydrophobic part (polyethylene chain) and a mildly hydrophilic tail. The plots of number‐average molecular weight versus conversion and ln{[M]₀/[M]} versus time are linear, indicating a controlled polymerization. This method leads to the preparation of α,ω‐di(iodo) poly(2‐methoxyethyl acrylate)s (α,ω‐di(iodo)PMEA) macroinitiators that can be further functionalized. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV) and refractive index (RI). The method studied in this work represents a possible route to prepare well‐tailored macromolecules made of 2‐methoxyethyl acrylate (biocompatible material) in an environmentally friendly reaction medium. To the best of our knowledge there is no previous report dealing with the synthesis of PMEA by any LRP approach in aqueous medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4454–4463, 2009     

Polymerization of methyl acrylate with triphenylbismuthonium 1,2,3,4‐tetraphenylcyclopentadienylide as a new radical initiator

Triphenylbismuthonium 1,2,3,4‐tetraphenylcyclopentadienylide in 1,4‐dioxan initiated radical polymerization of methyl acrylate to ～30% conversion without gelation because of autoacceleration. The polymer had a viscosity‐average molecular weight of 200,000. The kinetic expression was R_pα[I]^0.3[M]^1.16, that is, the system followed nonideal kinetics because of primary radical termination and degradative chain‐transfer reactions. The values of kk_t and the energy of activation were computed as 3.12 × 10^?5 Lmol^?1s^?1 and 28 kJ/mol, respectively. The ylide dissociated to form a phenyl radical, which brought about polymerization of methyl acrylate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2060–2065, 2004     

Kinetics of methyl methacrylate and n‐butyl acrylate copolymerization mediated by 2‐cyanoprop‐2‐yl dithiobenzoate as a RAFT agent

The RAFT (co)polymerization kinetics of methyl methacrylate (MMA) and n‐butyl acrylate (BA) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was studied with various RAFT concentrations and monomer compositions. The homopolymerization of MMA gave the highest rate. Increasing the BA fraction f_BA dramatically decreased the copolymerization rate. The rate reached the lowest point at f_MMA ～ 0.2. This observation is in sharp contrast to the conventional RAFT‐free copolymerization, where BA homopolymerization gave the highest rate and the copolymerization rate decreased monotonously with increasing f_MMA. This peculiar phenomenon can be explained by the RAFT retardation effect. The RAFT copolymerization rate can be described by 〈R_p〉/〈R_p〉₀ = (1 + 2(〈k_c〉/〈k_t〉)〈K〉)[RAFT]₀)^?0.5, where 〈R_p〉₀ is the RAFT‐free copolymerization rate and 〈K〉 is the apparent addition–fragmentation equilibrium coefficient. A theoretical expression of 〈K〉 based on a terminal model of addition and fragmentation reactions was derived and successfully applied to predict the RAFT copolymerization kinetics with the rate parameters obtained from the homopolymerization systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3098–3111, 2007     

Polymerization of methyl acrylate mediated by copper(0)/Me6‐TREN in hydrophobic media enhanced by phenols; Single electron transfer‐living radical polymerization

Phenol has been used as an additive to enhance the rate of SET‐LRP in toluene at ambient temperature. A direct relationship between reaction time and amount of phenol added has been found with the optimum amount being ～ 20 equiv. of phenol with respect to initiator. Polymerization of methyl acrylate (MA) has been carried out in the presence of varying amounts of phenol and the rate of polymerization depends on the concentration of phenol relative to initiator. With a 20‐fold excess 93% conversion is observed after 218 min (PDI = 1.06, M_n = 11,500 g mol^?1) when compared with 80% conversion with a 5‐fold excess (PDI = 1.21, M_n = 5310 g mol^?1). When nonsterically hindered phenols are employed in a 20 molar excess with respect to the initiator the polymerizations have good linear first‐order kinetics and give polymers with PDI between 1.06 and 1.16. When a highly hindered phenol is employed there is a significant induction period prior to polymerization taking place which is similar to when using no phenol. Less hindered phenols accelerated the polymerization when compared with polymerizations with no added phenol. Increasing steric hindrance at the ? OH prevents this coordination which indicates that the role of phenol is different with either copper(0) or copper(I). Aliphatic and aromatic esters and amides were used successfully as initiators giving polymers with M_n close to that predicted at ～ 10,000 g mol^?1 and PDI typically less than 1.10. An induction period is observed in most cases which can be removed by a pre‐equilibrium step before the addition of monomer. This results in excellent first‐order kinetics being observed in the polymerization of MA in toluene solution (50 vol %). Here Cu(0) (powder)/Me₆‐TREN with 20 equiv. of phenol and all of the reactants, except the monomer, were added to the reaction flask and stirred for 45 min at 25 °C. The structure of the polymer is shown by MALDI TOF MS to contain bromide chain ends derived from the alkyl bromide initiator. The retention of this end group is consistent with living radical polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7376–7385, 2008     

The application of copper(II) deactivator on the single‐electron transfer living radical polymerization of tert‐butyl acrylate

We demonstrate the living radical polymerization of tert‐butyl acrylate (tBA) applying the SET mechanism, employing methyl 2‐bromopropionate (MBP) as initiator in dimethyl sulfoxide (DMSO) at ambient temperature. It is observed that introducing copper bromide into the catalyst system is necessary for controlling on the SET‐LRP polymerization of tBA. In this work, we make major investigation for the effect of the different stoichiometry quantity of copper bromide on the polymerization. Experiments show that the polymerization achieves better control with increasing the stoichiometry quantity of copper(II) deactivator. The structural analysis of the resulting polymers by ¹H NMR demonstrates the successful synthesis of poly(tBA)s by SET‐LRP in DMSO. Moreover, this work is helpful to the SET‐LRP of other monomers and is expected to expand the application of SET‐LRP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2793–2797, 2010     

Atom‐Transfer Radical Polymerization of 2‐(N,N‐Dimethylamino)ethyl Acrylate

ATRP of 2‐(N,N‐dimethylamino)ethyl acrylate (DMAEA) was investigated using CuBr or CuCl with different multidentate ligands. The catalyst was found active for DMAEA polymerization when ligated with tris[2‐(N,N‐dimethylamino)ethyl]amine. Good control over molecular weight was achieved, but quaternization of the terminal monomeric/polymeric tertiary amine by the C Br group of polyDMAEA caused chain termination. Using a chloride‐based system helped to suppress chain termination. Amphiphilic poly(methyl acrylate)‐block‐polyDMAEA was synthesized using polyMA as a macroinitiator.

Molecular weights and polydispersities of polyDMAEA versus DMAEA conversion for different catalyst systems.     

Synthesis of double hydrophilic poly(ethylene oxide)‐b‐poly(2‐hydroxyethyl acrylate) by single‐electron transfer–living radical polymerization

In this study, the polymerization of (2‐hydroxyethyl) acrylate (HEA), in polar media, using Cu(0)‐mediated radical polymerization also called single‐electron transfer–living radical polymerization (SET‐LRP) is reported. The kinetics aspects of both the homopolymerization and the copolymerization from a poly(ethylene oxide) (PEO) macroinitiator were analyzed by ¹H NMR. The effects of both the ligand and the solvent were studied. The polymerization was shown to reach very high monomer conversions and to proceed in a well‐controlled fashion in the presence of tris[2‐(dimethylamino)ethyl]amine Me6‐TREN and N, N,N′, N″, N″‐pentamethyldiethylenetriamine (PMDETA) in dimethylsulfoxide (DMSO). SET‐LRP of HEA was also led in water, and it was shown to be faster than in DMSO. In pure water, Me₆‐TREN allowed a better control over the molar masses and polydispersity indices than PMDETA and TREN. Double hydrophilic PEO‐b‐PHEA block copolymers, exhibiting various PHEA block lengths up to 100 HEA units, were synthesized, in the same manner, from a bromide‐terminated PEO macroinitiator. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Evidence of Branching in Poly(butyl acrylate) Produced in Pulsed‐Laser Polymerization Experiments

Branched poly(butyl acrylate) was obtained from pulsed‐laser polymerizations carried out in bulk and in solution between −16 and 60 °C. The predominantly short branches are formed by backbiting. The Arrhenius temperature dependence of the backbiting rate is calculated, and the activation energy of this process was found to be remarkably higher than that of propagation. Branching thus increases with temperature leading to broader SEC traces and difficulties in the accurate determination of k_p.

Arrhenius plot of k_fp2 versus 1/T determined experimentally.     

Novel polymers based on atom transfer radical polymerization of 2‐methoxyethyl acrylate

Atom transfer radical polymerization (ATRP) has been employed in the polymerization of 2‐methoxyethyl acrylate (MEA) initiated by ethyl 2‐bromoisobutyrate in bulk or in toluene solution at 90–95 °C with the catalytic systems Cu(I)Br/PMDETA or HMTETA. Kinetics investigations revealed that ATRP of MEA proceeds in a controlled manner with a first‐order plot of monomer consumption, an almost linear molecular weight evolution and polydispersities < 1.29 in the entire conversion range. Well‐defined diblock copolymers with PMMA, PMEA‐b‐PMMA have been produced by use of both PMEA and PMMA macroinitiators, however, for the latter the controlled conditions were somehow difficult to maintain. The amphiphilic behavior of the diblock copolymers lead to phase separation resulting in two glass transition temperatures as detected by DSC. Contact angle (Θ) investigations with water on PMEA, PMMA, and diblock copolymers surfaces reveal PMEA as an intermediate hydrophilic with Θ ～ 50°, whereas PMMA and the diblock copolymers all fall in the hydrophobic region with Θ > 70°. © 2006 Wiley Periodicals, Inc. J Polym Sci Part Polym Chem45: 333–340, 2007     

Atom transfer radical polymerization of n‐butyl acrylate catalyzed by CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine

The homogeneous atom transfer radical polymerization (ATRP) of n‐butyl acrylate with CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine as a catalyst and ethyl 2‐bromoisobutyrate as an initiator was investigated. The kinetic plots of ln([M]₀/[M]) versus the reaction time for the ATRP systems in different solvents such as toluene, anisole, N,N‐dimethylformamide, and 1‐butanol were linear throughout the reactions, and the experimental molecular weights increased linearly with increasing monomer conversion and were very close to the theoretical values. These, together with the relatively narrow molecular weight distributions (polydispersity index ～ 1.40 in most cases with monomer conversion > 50%), indicated that the polymerization was living and controlled. Toluene appeared to be the best solvent for the studied ATRP system in terms of the polymerization rate and molecular weight distribution among the solvents used. The polymerization showed zero order with respect to both the initiator and the catalyst, probably because of the presence of a self‐regulation process at the beginning of the reaction. The reaction temperature had a positive effect on the polymerization rate, and the optimum reaction temperature was found to be 100 °C. An apparent enthalpy of activation of 81.2 kJ/mol was determined for the ATRP of n‐butyl acrylate, corresponding to an enthalpy of equilibrium of 63.6 kJ/mol. An apparent enthalpy of activation of 52.8 kJ/mol was also obtained for the ATRP of methyl methacrylate under similar reaction conditions. Moreover, the CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine‐based system was proven to be applicable to living block copolymerization and living random copolymerization of n‐butyl acrylate with methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3549–3561, 2002     

Synthesis and enzymatic degradation of 2‐methylene‐1,3‐dioxepane and methyl acrylate copolymers

Copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and methyl acrylate (MA) containing ester units both in the backbone and as pendant groups were synthesized by free‐radical copolymerization. The influence of reaction conditions such as the polymerization time, temperature, initiator concentration, and comonomer feed ratio on the yield, molecular weight, and copolymer composition was investigated. The structure of the copolymers was confirmed by ¹H NMR, ¹³C NMR, and IR spectroscopy. Differential scanning calorimetry indicated that the copolymers had a random structure. An NMR study showed that hydrogen transfer occurred during the copolymerization. The reactivity ratios of the comonomers were r_MDO = 0.0235 and r_MA = 26.535. The enzymatic degradation of the copolymers obtained was carried out in the presence of proteinase K or a crude enzyme extracted from earthworms. The experimental results showed that the higher ester molar percentage in the backbone caused a faster degradation rate. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2898–2904, 2003     

Alkyl chloride initiators for SET‐LRP of methyl acrylate

Single‐electron transfer living radical polymerization (SET‐LRP) proceeds by an outer‐sphere single‐electron transfer mechanism that induces a heterolytic bond cleavage of the initiating and propagating R‐X (where X = Cl, Br, and I) species. Therefore, unlike the homolytic bond cleavage mechanism claimed for ATRP, SET‐LRP is expected to show a small dependence of the nature of the halide group on the apparent rate constant of activation. This means the R‐X with X = Cl, Br, and I must all be efficient initiators for SET‐LRP and no chain transfer must be observed in the case of initiators with X = Br and I. Here, we report the SET‐LRP of methyl acrylate initiated with the alkyl chlorides methyl‐2‐chloropropionate (MCP) and chloroform (CHCl₃) and catalyzed by Cu(0)/Me₆‐TREN/CuCl₂ in DMSO at 25 °C. A combination of kinetic and structural analysis was used to elucidate the MCP and CHCl₃ initiating behavior under SET‐LRP conditions, and to demonstrate the very small dependence of the SET‐LRP apparent rate constant of propagation on X while providing polymers with well defined architecture. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4917–4926, 2008     

Radical Ring‐Opening Polymerization Behavior of 1,1‐Dicyano‐2‐Vinylcyclopropane and Its Copolymerization with 1‐Cyano‐1‐Ester‐2‐Vinylcyclopropane

Radical ring‐opening polymerization of 1,1‐dicyano‐2‐vinylcyclopropane 1 was performed in benzonitrile to find the corresponding homopolymer 2 soluble in organic solvents was successfully obtained while that in other solvents gave crosslinked and thus insoluble homopolymer. In addition, 1 underwent radical copolymerization with 1‐cyano‐1‐ester‐2‐vinylcyclopropanes 3 and 4 to afford the corresponding copolymers 7 and 8 . By increasing the content of the 1 ‐derived unit in the resulting copolymers, the solubility of the copolymers in organic solvents became lower and the residual weights at 600 °C and their glass transition temperatures became higher. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1723–1729     

Single‐pulse pulsed laser polymerization–electron paramagnetic resonance investigations into the termination kinetics of n‐butyl acrylate macromonomers

The termination of model mid‐chain radicals (MCRs), which mimic radicals that occur in acrylate polymerization over a broad range of reaction conditions, has been studied by single‐pulse pulsed laser polymerization (SP‐PLP) in conjunction with electron paramagnetic resonance spectroscopy. The model radicals were generated by initiator‐fragment addition to acrylic macromonomers that were preformed prior to the kinetic experiments, thus enabling separation of termination from the propagation reaction, for these model radicals propagate sparingly, if at all, on the timescale of SP‐PLP experiments. Termination rate coefficients of the MCRs were determined in the temperature range of 0–60°C in acetonitrile and butyl propionate solution as well as in bulk macromonomer over the range of 0–100 °C. Termination rate coefficients slightly below those of the corresponding secondary radicals were deduced, demonstrating the relatively high termination activity of this species, even when undergoing MCR–MCR termination. For chain length of 10, a reduction by a factor of 6 is observed. Unusually high activation energies were found for the termination rate coefficient in these systems, with 35 kJ mol^?1 being determined for bulk macromonomer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and optical characterization of photoactive poly(2‐phenoxyethyl acrylate) copolymers containing azobenzene units,prepared by frontal polymerization using novel ionic liquids as initiators

2‐Phenoxyethyl acrylate (2‐PEA) was polymerized alone and in the presence of an azobenzene comonomer derived from Disperse Red‐1, N‐ethyl‐N‐(2‐hydroxyethyl)‐4‐(4‐nitrophenylazo)aniline (MDR‐1), by using the frontal polymerization technique. Two novel ionic liquids, recently synthesized by us, were used as initiators: tetrabutylphosphonium persulfate (TBPPS) and trihexyltetradecylphosphonium persulfate (TETDPPS). Even if their concentrations were smaller than those found when benzoyl peroxide and terbutylperoxy neodecanoate were used, these compounds gave rise to stable propagating polymerization fronts characterized by relatively low maximum temperatures and good velocities. Moreover, at variance to these latter, TBPPS and TETDPPS prevent bubble formation, thus allowing the use of the obtained materials in optical applications. The obtained polymers were characterized by infrared spectroscopy (FTIR), their thermal properties were determined by differential scanning calorimetry, and their optical properties were studied by absorption spectroscopy in the UV–vis region. Finally, the nonlinear optical (NLO) properties of the 2‐PEA/MDR‐1 copolymers obtained with TBPPS and TETDPPS were performed according to the Z‐Scan technique with prepared film samples. It has been proven that samples with higher MDR‐1 content (0.05 mol %) exhibited outstanding cubic NLO activity with negative NLO refractive coefficients around n₂ = ?1.7 × 10^?3 esu. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012