Preparation of functionalized montmorillonites and their application in supported zirconocene catalysts for ethylene polymerization

Ethylene polymerization was carried out with zirconocene catalysts supported on montmorillonite (or functionalized montmorillonite). The functionalized montmorillonite was from simple ion exchange of [CH₃O₂CCH₂NH₃]⁺ (MeGlyH⁺) ions with interlamellar cations of layered montmorillonites. The functionalized montmorillonites [high‐purity montmorillonite (MMT)‐MeGlyH⁺] had larger interlayer spacing (12.69 Å) than montmorillonites without treatment (9.65 Å). The zirconocene catalyst system [Cp₂ZrCl₂/methylaluminoxane (MAO)/MMT‐MeGlyH⁺] had much higher Zr loading and higher activities than those of other zirconocene catalyst systems (Cp₂ZrCl₂/MMT, Cp₂ZrCl₂/MMT‐MeGlyH⁺, Cp₂ZrCl₂/MAO/MMT, [Cp₂ZrCl]⁺[BF₄]/MMT, [Cp₂ZrCl]⁺[BF₄]^?/MMT‐MeGlyH⁺, [Cp₂ZrCl]⁺[BF₄]^?/MAO/MMT‐MeGlyH⁺, and [Cp₂ZrCl]⁺[BF₄]^?/MAO/MMT). The polyethylenes with good bulk density were obtained from the catalyst systems, particularly (Cp₂ZrCl₂/MAO/MMT‐MeGlyH⁺). MeGlyH⁺ and MAO seemed to play important roles for preparation of the supported zirconocenes and polymerization of ethylene. The difference in Zr loading and catalytic activity among the supported zirconocene catalysts is discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1892–1898, 2002     

In situ ethylene homopolymerization and copolymerization catalyzed by zirconocene catalysts entrapped inside functionalized montmorillonite

Ethylene homopolymerizations and copolymerizations were catalyzed by zirconocene catalysts entrapped inside functionalized montmorillonites that had been rendered organophilic via the ion exchange of the interlamellar cations of layered montmorillonite with hydrochlorides of L ‐amino acids (AAH⁺Cl^?) or their methyl esters (MeAAH⁺Cl^?), with or without the further addition of hexadecyltrimethylammonium bromide (C₁₆H₃₃N⁺Me₃Br^?; R₄N⁺Br^?). In contrast to the homogeneous Cp₂ZrCl₂/methylaluminoxane catalyst for ethylene homopolymerizations and copolymerizations with 1‐octene, the intercalated Cp₂ZrCl₂ activated by methylaluminoxane for ethylene homopolymerizations and copolymerizations with 1‐octene proved to be more effective in the synthesis of polyethylenes with controlled molecular weights, chemical compositions and structures, and properties, including the bulk density. The effects of the properties of the organic guests on the preparation and catalytic performance of the intercalated zirconocene catalysts were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2187–2196, 2003     

Effects of ethylene polymerization conditions on the activity of SiO2-supported zirconocene and on polymer properties

The effects of polymerization conditions were evaluated on the production of polyethylene by silica-supported (n-BuCp)₂ZrCl₂ grafted under optimized conditions and cocatalyzed by methylaluminoxane (MAO). The Al : Zr molar ratio, reaction temperature, monomer pressure, and the age and concentration of the catalyst were systematically varied. Most reactions were performed in toluene. Hexane, with the addition of triisobutilaluminum (TIBA) to MAO, was also tested as a polymerization solvent for both homogeneous and heterogeneous catalyst systems. Polymerization reactions in hexane showed their highest activities with MAO : TIBA ratios of 3 : 1 and 1 : 1 for the homogeneous and supported systems, respectively. Catalyst activity increased continuously as Al : Zr molar ratios increased from 0 to 2000, and remained constant up to 5000. The highest activity was observed at 333 K. High monomer pressures (≈ 4 atm) appeared to stabilize active species during polymerization, producing polyethylenes with high molecular weight (≈ 3 × 10⁵ g mol⁻¹). Catalyst concentration had no significant effect on polymerization activity or polymer properties. Catalyst aging under inert atmosphere was evaluated over 6 months; a pronounced reduction in catalyst activity [from 20 to 13 × 10⁵ g PE (mol Zr h)⁻¹] was observed only after the first two days following preparation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1987–1996, 1999     

Preparation of polyethylene block copolymers by a combination of postmetallocene catalysis of ethylene polymerization and atom transfer radical polymerization

The synthesis of block copolymers consisting of a polyethylene segment and either a poly(meth)acrylate or polystyrene segment was accomplished through the combination of postmetallocene-mediated ethylene polymerization and subsequent atom transfer radical polymerization. A vinyl-terminated polyethylene (number-average molecular weight = 1800, weight-average molecular weight/number-average molecular weight =1.70) was synthesized by the polymerization of ethylene with a phenoxyimine zirconium complex as a catalyst activated with methylalumoxane (MAO). This polyethylene was efficiently converted into an atom transfer radical polymerization macroinitiator by the addition of α-bromoisobutyric acid to the vinyl chain end, and the polyethylene macroinitiator was used for the atom transfer radical polymerization of n-butyl acrylate, methyl methacrylate, or styrene; this resulted in defined polyethylene-b-poly(n-butyl acrylate), polyethylene-b-poly(methyl methacrylate), and polyethylene-b-polystyrene block copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 496–504, 2004     

Benzophenone‐functionalized,starlike polystyrenes as organic supports for a tridentate bis(imino)pyridinyliron/trimethylaluminum catalytic system for ethylene polymerization

Starlike polystyrenes composed of a microgel core and arms terminated with benzophenone groups were used as organic supports for a tridentate bis(imino)pyridinyliron catalyst for ethylene polymerization in the presence of trimethylaluminum as a cocatalyst. The microgels were synthesized by the atom transfer radical polymerization of styrene initiated by 4‐(1‐bromoethyl)‐benzophenone, with divinylbenzene as the crosslinker. The bromine polystyrene chain ends prevented the ethylene polymerization reaction and had to be removed. This was readily achieved with Cu⁰ together with dodecanethiol as a transfer agent. When used as supports in the presence of trimethylaluminum and 2,6‐bis[1‐2,6(diisopropylphenyl)imino]ethylpyridynyl iron, these bromine‐free, functionalized polystyrene stars enabled the production of polyethylene beads of a spherical morphology and high bulk density with a catalytic activity similar to that under homogeneous reaction conditions. Moreover, the molar mass distribution of the polyethylene was narrow, suggesting limited transfer to trimethylaluminum. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6997–7007, 2006     

Methylaluminoxane‐free ethylene polymerization with in situ activated zirconocene triisobutylaluminum catalysts and silica‐supported stabilized borate cocatalysts

Heterogenization of tris(pentafluorophenyl)borane [B(C₆F₅)₃] on a silica support stabilized with chlorotriphenylmethane (CICPh₃) and N,N‐dimethylaniline (HNMe₂Ph) creates the following supported borane cocatalysts: [HNMe₂Ph]⁺[B(C₆F₅)₃‐SiO₂]^? and [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^?. These supported catalysts were reacted with Cp₂ZrCl₂ TIBA in situ to generate active metallocene species in the reactor. Triisobutylaluminum (TIBA) was a good coactivator for dichloro‐zirconocene, acting as the prealkylating agent to generate cationic zirconocene (Cp₂ZrC₄H₉⁺). The catalytic performances were determined from the kinetics of ethylene‐consumption profiles that were independent of the time dedicated to the activation of the catalysts. The scanning electron microscopy‐energy dispersive X‐ray measurements showed that B(C₆F₅)₃ dispersed uniformly on the silica support. Under our reaction conditions, the [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? system had higher productivity and weight‐average molecular weight than the [HNMe₂Ph]⁺[B(C₆F₅)₃‐SiO₂]^? system. For the [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? system, the productivity increased with the amount catalyst; however, the polydispersity index of polyethylene synthesized did not change. The final shape of polymer particles was a larger‐diameter version of the original support particle. The polymer particles synthesized with supported [CPh₃]⁺[B(C₆F₅)₃‐SiO₂]^? catalysts had larger diameters. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3240–3248, 2002     

Preparation and functionalization of reactive monodisperse macroporous poly(chloromethylstyrene-co-styrene-co-divinylbenzene) beads by a staged templated suspension polymerization

Reactive monodisperse porous poly(chloromethylstyrene-co-styrene-co-divinylbenzene) beads have been prepared by a staged templated suspension polymerization method with different concentrations of linear polystyrene porogen and chloromethylstyrene in the polymerization mixture. The presence of a small amount of linear polystyrene in the polymerization mixture leads to a dramatic increase in both the pore size and the pore volume of the resulting beads. In contrast, addition of chloromethylstyrene leads to lower surface areas and smoother surfaces due to the reduced compatibility between the polystyrene porogen and the newly formed crosslinked chains. The modification of chloromethylstyrene beads by Gabriel synthesis to obtain aminated beads has also been studied. The final number of primary amino groups is related to the starting concentration of functional benzyl chloride moieties rather than to the porous properties. Both π-basic and π-acidic type chiral selectors, (R)-1-(1-naphthyl)-ethylamine and (R)-N-(3,5-dinitrobenzoyl)phenylglycine, respectively, have been attached to the amino functionalized beads, and the resulting chiral beads have been used in the model HPLC separations of enantiomers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2631–2643 1997     

Kinetic modeling studies of ethylene polymerization reactions using supported chromium catalysts

Kinetic models for ethylene polymerization based on a general coordination–insertion mechanism, in which either a monocoordinated species or a bicoordinated species could lead to migratory insertion, were constructed. These models were implemented through the solution of a set of differential equations resulting from the material balances for all the species involved. The application of these kinetic models to monomer consumption for different supported catalysts produced very good fittings and allowed the estimation of the kinetic rate constants of each elementary step. Although the same kinetic scheme was used to describe all the observations, the results of the fitting showed that the supported chromium species behaved very differently according to the support. Only in the case of the silica‐supported catalysts was mechanical fragmentation of the particles observed during the course of the reaction, and this implied the inclusion of a new term in the model. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3464–3472, 2004     

In situ polymerization of ethylene using metallocene catalysts: Effect of clay pretreatment on the properties of highly filled polyethylene nanocomposites

Highly filled polyethylene (PE)‐based nanocomposites were obtained by insitu polymerization technique. An organically modified montmorillonite, Cloisite® 15A (C15A), was previously treated with methylaluminoxane (MAO) to form a supported cocatalyst (C15A/MAO) before being contacted with a zirconocene catalyst. The main features of C15A/MAO intermediates were studied by elemental analysis, TGA, TGA‐FTIR, WAXD, and TEM. MAO reacts with the clay, replaces most of the organic surfactant within the clay galleries and destroys the typical crystrallographic order of the nanoclay. The catalytic activity in the presence of C15A/MAO is higher than in ethylene polymerization without any inorganic filler and increases with MAO supportation time. This indicates that part of the polymer chains grows within the clay galleries, separates them, and makes it possible to tune the final morphology of the composites. The polymerization results and the influence of C15A pretreatment and polymerization conditions on thermal and morphological properties of the hybrid PE/C15A nanocomposites are presented. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5390–5403, 2008     

Study of the composition and morphology of new modifications of titanium‐magnesium catalysts with improved properties in ethylene polymerization

Data on new modifications of supported titanium‐magnesium catalysts (TMCs) with improved performance in ethylene polymerization are reported. These catalysts possess a high and stable activity, an enhanced ability to regulate molecular weight of the polymer by hydrogen, a controllable particle size at a narrow particle size distribution, and the ability to produce the polymer with an increased bulk density. Various physicochemical methods were used to obtain data on the chemical composition of novel supports and catalysts, their phase composition and crystal structure as well as the pore structure. The results obtained were used to discuss possible correlations between composition and structure of TMCs and their catalytic properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2545–2558     

Synthesis of a new zirconium catalyst for ethylene polymerization

A novel complex dichlorobis(2‐ethyl‐3‐hydroxy‐4‐pyrone)zirconium(IV) (ZrCl₂(ethylpyrone)₂) was synthesized. Complexation of the pyrone ligand to the zirconium was confirmed by UV, ¹H and ¹³C‐NMR, and electrochemical studies. NMR showed the presence of four isomers and density functional theory calculations indicated that the main isomer had a cis configuration. The catalyst was shown to be active in ethylene polymerization in the presence of the cocatalyst methylaluminoxane. The highest catalyst activity for the zirconium complex was achieved at Al/Zr = 2500, 70 °C and when a small concentration of catalyst was used (1 μmol). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3830–3841, 2008     

Preparation of molecularly imprinted polymers for strychnine by precipitation polymerization and multistep swelling and polymerization and their application for the selective extraction of strychnine from nux‐vomica extract powder

Monodisperse molecularly imprinted polymers for strychnine were prepared by precipitation polymerization and multistep swelling and polymerization, respectively. In precipitation polymerization, methacrylic acid and divinylbenzene were used as a functional monomer and crosslinker, respectively, while in multistep swelling and polymerization, methacrylic acid and ethylene glycol dimethacrylate were used as a functional monomer and crosslinker, respectively. The retention and molecular recognition properties of the molecularly imprinted polymers prepared by both methods for strychnine were evaluated using a mixture of sodium phosphate buffer and acetonitrile as a mobile phase by liquid chromatography. In addition to shape recognition, ionic and hydrophobic interactions could affect the retention of strychnine in low acetonitrile content. Furthermore, molecularly imprinted polymers prepared by both methods could selectively recognize strychnine among solutes tested. The retention factors and imprinting factors of strychnine on the molecularly imprinted polymer prepared by precipitation polymerization were 220 and 58, respectively, using 20 mM sodium phosphate buffer (pH 6.0)/acetonitrile (50:50, v/v) as a mobile phase, and those on the molecularly imprinted polymer prepared by multistep swelling and polymerization were 73 and 4.5. These results indicate that precipitation polymerization is suitable for the preparation of a molecularly imprinted polymer for strychnine. Furthermore, the molecularly imprinted polymer could be successfully applied for selective extraction of strychnine in nux‐vomica extract powder.     

Preparation and application of a novel core–shell‐particle‐supported zirconocene catalyst

The use of functional groups bearing silica/poly(styrene‐co‐4‐vinylpyridine) core–shell particles as a support for a zirconocene catalyst in ethylene polymerization was studied. Several factors affecting the behavior of the supported catalyst and the properties of the resulting polymer, such as time, temperature, Al/N (molar ratio), and Al/Zr (molar ratio), were examined. The conditions of the supported catalyst preparation were more important than those of the ethylene polymerization. The state of the supported catalyst itself played a decisive role in both the catalytic behavior of the supported catalyst and the properties of polyethylene (PE). IR and X‐ray photoelectron spectroscopy were used to follow the formation of the supports. The formation of cationic active species is hypothesized, and the performance of the core–shell‐particle‐supported zirconocene catalyst is discussed as well. The bulk density of the PE formed was higher than that of the polymer obtained from homogeneous and polymer‐supported Cp₂ZrCl₂/methylaluminoxane catalyst systems. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2085–2092, 2001     

Preparation and characterization of core–shell polymer particles with protonizable shells prepared by oxyanionic polymerization

A series of polystyrene (PS)/poly(vinyl acetate) (PVAc) crosslinked particles (240, 210, or 90 nm) with different concentrations of PS (75, 50, or 25 wt %) were prepared by soap‐free emulsion polymerization. Based on the crosslinked polymer particles, three series of monodisperse core–shell particles with pH‐sensitive poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) shells were synthesized by oxyanionic polymerization. During the oxyanionic polymerization, the acetate groups of PVAc were hydrolyzed, and the hydroxyl groups that formed on the surfaces of the particles, acting as initiators, were transferred to ? O^?K⁺ by DMSO^?K⁺ (where DMSO is dimethyl sulfoxide) at the same time; then, ? O^?K⁺ initiated the polymerization of 2‐(dimethylamino)ethyl methacrylate. ¹H NMR and Fourier transform infrared studies confirmed the existence of PDMAEMA shells, and the contents of PDMAEMA were measured by elemental analysis. Because the PDMAEMA chain could be protonated at a low pH, these core–shell particles could adsorb negatively charged modified magnetite particles, and at higher pHs, the magnetite particles could be released again; this process was reversible. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6081–6088, 2004     

Preparations and properties of uniform size macroporous polymer beads prepared by two-step swelling and polymerization method utilizing divinyl succinate or divinyl adipate as a crosslinking agent

Uniform size macroporous polymer beads were prepared through a typical two-step swelling and polymerization method utilizing divinyl succinate or divinyl adipate as well as ethylene dimethacrylate as crosslinking agents. Stable macroporous polymer beads with good size monodispersity and a slightly nonspherical shape were obtained by homopolymerization of divinyl succinate in cyclohexanol as porogen. BET measurements indicated that the beads prepared by homopolymerization of divinyl succinate and copolymerization of divinyl succinate with vinyl p-tert-butylbenzoate, as well as homopolymerization of ethylene dimethacrylate had relatively large specific surface area. In contrast, copolymerization of divinyl succinate with methyl methacrylate afforded beads having a very small specific surface area. Similarly, all the beads prepared using divinyl adipate had very small specific surface area, while size exclusion chromatography in tetrahydrofuran suggested that these beads acquired a porous structure as a result of swelling. When used as packing materials for high-performance liquid chromatography, the beads prepared with divinyl adipate showed unexpected molecular recognition toward flat solutes in reversed phase liquid chromatography in contrast to those prepared with ethylene dimethacrylate. Copolymerizations with methyl methacrylate led to a decrease in molecular recognition, while those with vinyl p-tert-butylbenzoate enhanced the selectivity. © 1996 John Wiley & Sons, Inc.     

In situ polymerization of ethylene with bis(imino)pyridine iron(II) catalysts supported on clay: The synthesis and characterization of polyethylene–clay nanocomposites

Polyethylene–clay nanocomposites were synthesized by in situ polymerization with 2,6‐bis[1‐(2,6‐diisopropylphenylimino)ethyl] pyridine iron(II) dichloride supported on a modified montmorillonite clay pretreated with methylaluminoxane (MAO). The catalysts and the obtained nanocomposites were examined with wide‐angle X‐ray scattering. The exfoliation of the clay was further established by transmission electron microscopy. Upon the treatment of the clay with MAO, there was an increase in the d‐spacing of the clay galleries. No further increase in the d‐spacing of the galleries was observed with the iron catalyst supported on the MAO‐treated clay. The catalyst activity for ethylene polymerization was independent of the Al/Fe ratio. The exfoliation of the clay inside the polymer matrix depended on various parameters, such as the clay content, catalyst content, and Al/Fe ratio. The crystallinity percentage and crystallite size of the nanocomposites were affected by the degree of exfoliation of the clay. Moreover, when ethylene was polymerized with a mixture of the homogeneous iron(II) catalyst and clay, the degree of exfoliation was significantly lower than when the polymerization was performed with a preformed clay‐supported catalyst. This observation suggested that in the supported catalyst, at least some of the active centers resided within the galleries of the clay. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 304–318, 2005     

石墨烯/二氯化镁负载钛系齐格勒-纳塔催化剂制备及其乙烯聚合性能

石墨烯自2004年发现以来,由于其独一无二的优异性迅速成为科学家们的研究热点.由于石墨烯具有极其优异的电学、力学和热学等性能,因此被广泛应用于高性能聚合物基复合材料的制备.众所周知,纳米填料在聚合物中的分散状态以及与基体间的界面作用是构筑高性能聚合物纳米复合材料的关键因素.由于石墨烯极易团聚,难以通过传统的熔融共混法制备均匀分散的石墨烯增强-聚烯烃纳米复合材料.另一方面,聚烯烃通常需要在较高温度下才能溶于部分有毒溶剂(如:三氯苯和二甲苯等),因此溶液共混法也不适用于聚烯烃-石墨烯纳米复合材料的制备.有鉴于此,本文开发了一种共沉积法制备石墨烯/二氯化镁负载钛系齐格勒-纳塔催化剂的路线.通过原位聚合直接制备出石墨烯均匀分散的聚烯烃/石墨烯纳米复合材料.考察了石墨烯的加入量对催化剂形态及其催化乙烯聚合行为的影响.当石墨烯加入量较低时,多个石墨烯片被包裹于较大的催化剂粒子中.随着石墨烯加入量的增加,催化剂趋向于在石墨烯表面聚集.继续增加石墨烯量将导致石墨烯包裹催化剂粒子,降低过渡金属钛的负载效率.通过三乙基铝活化后,所制备的催化剂具有非常高的乙烯催化活性,所生成的聚乙烯/石墨烯纳米复合材料复制了催化剂的片状结构.同时,通过对所制备的聚乙烯/石墨烯纳米复合材料进行电子显微镜和X射线衍射分析可知,石墨烯均匀分散于聚乙烯基体中,并且没有任何团聚现象发生.该复合材料的热重分析表明,仅加入非常少量的石墨烯就可以使其具有比纯聚乙烯更高的热稳定性,当石墨烯加入量为0.66 wt%时,其5 wt%热分解温度较纯聚乙烯升高了54°C.同时,所制备聚乙烯/石墨烯纳米复合材料具有更优异的机械性能.因此,本研究提供了一个简单高效的高性能聚烯烃/石墨烯纳米复合材料的制备方法.     

Synthesis and characterization of a series of 2‐aminopyridine nickel(II) complexes and their catalytic properties toward ethylene polymerization

A series of 2‐aminopyridine Ni(II) complexes bearing different substituent groups {(2‐PyCH₂NAr)NiBr, Ar = 2,4,6‐trimethylphenyl ( 3a) , 2,6‐dichlorophenyl ( 3b ), 2,6‐dimethylphenyl ( 3c) , 2,6‐diisopropylphenyl ( 3d ), 2,6‐difluorophenyl ( 3e ); (2‐PyCH₂NHAr)₂NiBr₂, Ar = 2,6‐diisopropylphenyl ( 4a )} have been synthesized and investigated as precatalysts for ethylene polymerization in the presence of methylaluminoxane (MAO). High molecular weight branched polymers as well as short‐chain oligomers were simultaneously produced with these complexes. Enhancing the steric bulk of the ortho‐aryl‐substituents of the catalyst resulted in higher ratio of solid polymer to oligomer and higher molecular weight of the polymer. With ortho‐haloid‐substitution, the catalysts afforded a product with low polymer/oligomer ratio ( 3b ) and even only oligomers ( 3e ) in which C₁₄H₂₈ had the maximum content. Compared with complex 3d containing ionic ligand, complex 4a containing neutral ligand exhibited obviously low catalytic activity for ethylene polymerization. The molecular weight, molecular weight distribution, and microstructure of the resulted polymer were characterized by gel permeation chromatography and ¹³C NMR spectrogram. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1618–1628, 2008     

Polydispersity of ethylene sequence length in metallocene ethylene/α‐olefin copolymers. I. Characterized by thermal‐fractionation technique

In this article, the polydispersity of the ethylene sequence length (ESL) in ethylene/α‐olefin copolymers was studied by atomic force microscopy (AFM) and the thermal‐fractionation technique. The crystal morphology observation by AFM showed that morphology changed gradually with decreasing average ESL from complete lamellae over shorter and more curved lamellae to a granular‐like morphology, and the mixed morphology was observed after stepwise crystallization from phase‐separated melt. This result indicated that the ethylene sequence with different lengths crystallized into a crystalline phase with a different size and stability at the copolymer systems. The thermal‐fractionation technique was used to characterize the polydispersity of ESL. Three of the following statistical terms were introduced to describe the distribution of ESL and the lamellar thickness: the arithmetic mean L?_n, the weight mean L?_w, and the broadness index I = L?_w/L?_n. It was concluded that the polydispersity of ESL could be quantitatively characterized by the thermal‐fractionation technique. The effects of temperature range, temperature‐dependent specific heat capacity C_p of copolymer, and the molecular weight on the results of thermal fractionation were discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 813–821, 2002