The multiple melting endotherms from poly(butylene terephthalate)

The melting behavior of poly(butylene terephthalate) (PBT) has been investigated, and a simulation has been performed to determine whether the multiple melting endotherms observed during the thermal analysis of PBT can be explained by the simultaneous melting and recrystallization of an initial distribution of crystal melting temperatures that contains only one maximum and two inflection points. Specimens that were cooled at constant rates from the melt showed between one and three melting endotherms upon heating in a differential scanning calorimeter (DSC). The position and breadth of the crystallization exotherms upon cooling from the melt and small-angle x-ray scattering showed that as the cooling rate is increased, the distribution of melting temperatures broadens and shifts to lower temperatures. By combining temperature-dependent recrystallization with an initial distribution of melting temperatures, simulated DSC curves were produced that agreed well with experimental DSC curves. In instances of triple peaked curves, the high temperature peak was due to crystals formed during the scanning process, and the middle and low temperature peaks were due to crystals originally present in the material. Satisfactory agreement between the experimental and simulated curves was found without considering additional crystallization from the amorphous regions during the scanning process.     

Making polymer concrete and polymer mortar using synthesized unsaturated polyester resins from poly(ethylene terephthalate) waste

Depolymerization of poly(ethylene terephthalate), PET, waste was studied in the presence of manganese acetate catalyst and propylene glycol (PG) at different weight ratios. The glycolyzed products were analyzed for hydroxyl value and the amount of free glycol. A series of unsaturated polyesters based on the glycolyzed products, maleic anhydride and styrene, were prepared. Molecular weights and curing behavior of these polyesters were determined. Polymer concrete (PC) and polymer mortars (PM) made with these resins were investigated for their compressive strength. It has been found that the properties of PC and PM obtained from resins based on recycled PET are comparable to PC and PM made from virgin materials.     

New polymer syntheses. CIX. Biodegradable,alternating copolyesters of terephthalic acid,aliphatic dicarboxylic acids,and alkane diols

Copolyesters with an alternating sequence of terephthalic acid and aliphatic dicarboxylic acids were prepared with three different methods. First, dicarboxylic acid dichlorides were reacted with bis(2‐hydroxyethyl)terephthalate (BHET) in refluxing 1,2‐dichlorobenzene. Second, the same monomers were polycondensed at 0–20 °C in the presence of pyridine. Third, dicarboxylic acid dichlorides and silylated BHET were polycondensed in bulk. Only this third method gave satisfactory molecular weights. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry revealed that the copolyesters prepared by the pyridine and silyl methods might have contained considerable fractions of cyclic oligoesters and polyesters despite the absence of transesterification and backbiting processes. The alternating sequences and thermal properties were characterized with ¹H NMR spectroscopy and differential scanning calorimetry measurements, respectively. In agreement with the alternating sequence, all copolyesters proved to be crystalline, but the crystallization was extremely slow [slower than that of poly(ethylene terephthalate)]. A second series of alternating copolyesters was prepared by the polycondensation of silylated bis(4‐hydroxybut‐ yl)terephthalate with various aliphatic dicarboxylic acid dichlorides. The resulting copolyesters showed significantly higher rates of crystallization, and the melting temperatures were higher than those of the BHET‐based copolyesters. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3371–3382, 2001     

Properties of sulfonated poly(butylene terephthalate)

The synthesis, morphology, and mechanical properties of sulfonated poly(butylene terephthalate) (PBT) and its unsulfonated analogs were studied. The morphology of these copolymers crystallized from the melt were examined by a combination of wide-angle x-ray scattering (WAXS), polarized light microscopy, and small-angle light scattering (SALS). Stress-strain measurements are correlated with the morphological results. Spherulitic morphology, with a maltese cross at 45°C with respect to the crossed polars, is formed at low sulfonate levels (≤ 5.0 mol %). At a higher ion content, the maltese cross rotates 45° to form a cross pattern. At still higher sulfonate contents, typically 13 mol %, the light scattering pattern disappears completely. Microscopic and WAXS examination of these functionalized PBT copolymers confirms that the crystallinity level decreases with increasing ion content and is eliminated completely at the higher sulfonation level. The spherulite radius, however, remains invariant until the highest functionalization level. On the contrary, the morphology and properties of the unsulfonated isophthalate copolymer analogs remain relatively constant over the entire composition range examined. In several compositions clearly inferior properties are noted compared with the ion-containing copolymers.     

New super‐tough poly(butylene terephthalate) materials based on compatibilized blends with metallocenic poly(ethylene‐octene) copolymer

New super‐tough poly(butylene terephthalate) (PBT)/poly(ethylene‐octene) copolymer (PEO) blends containing 2 wt% poly(ethylene‐co‐glycidyl methacrylate) (EGMA) as a compatibilizer were obtained by extrusion and injection molding. The blends comprised of an amorphous PBT‐rich phase with some miscibilized EGMA, a pure PEO amorphous phase, and a crystalline PBT phase that was not influenced by the presence of either PEO or EGMA. The blends showed a fine particle size up to 20 wt% PEO content. Super‐tough blends were obtained with PEO contents equal to or higher than 10%. The maximum toughness was very high (above 710 J/m) and was attained with 20% PEO without chemical modification of the commercial components used. Copyright © 2003 John Wiley & Sons, Ltd.     

Blends of a thermotropic liquid‐crystalline polymer and a poly(butylene terephthalate)/organoclay nanocomposite

Blends were synthesized via the melt blending of a thermotropic liquid‐crystalline polymer (TLCP) and a poly(butylene terephthalate) (PBT) hybrid containing 2 wt % organoclay. A TLCP was also synthesized with side groups based on a nematic liquid‐crystalline phase. The blends of TLCPs with PBT hybrids were melt‐spun with different concentrations of the liquid‐crystalline polymer and different draw ratios (DRs) to produce monofilaments. Regardless of the TLCP concentration in the hybrids, transmission electron microscopy photographs proved that the clay layers of the organoclay were intercalated and partially exfoliated in the PBT matrix. At DR = 1, the maximum enhancement in the ultimate tensile strength was observed for blends containing 8% TLCP, and the tensile strength decreased with further increases in the TLCP concentration. The initial modulus monotonically increased with increasing TLCP concentration. When DR increased from 1 to 44, the increased stretching caused the tensile property to decrease significantly, debonding to occur, and voids to form. These trends with increasing DR were observed in all the systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3667–3676, 2004     

Complete miscibility of ternary aryl polyesters demonstrating a new criterion and horizon for miscibility characterization

A ternary miscible blend system comprising only crystallizable aryl polyesters [poly(ethylene terephthalate), poly(trimethylene terephthalate), and poly(butylene terephthalate)] was characterized with the criteria of thermal analyses, microscopy, and X‐ray characterizations. The reported ternary miscibility (in the quenched amorphous state of blends of the three aryl polyesters) was truly physical and under the condition of no chemical transesterifications; this justified that transesterification was not a necessary condition for miscibility in polyester blends in this case. This study further proposed and tested a novel concept of a new criterion for miscibility characterization for polymer blends of only crystallizable polymers. A single composition‐dependent cold‐crystallization‐temperature (T_cc) peak in blends of only semicrystalline polymers was taken as an indication of an intimate mixing state of miscibility. The theoretical background for establishing the single composition‐dependent T_cc peak as a valid miscibility criterion for crystallizable polymer blends was examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2394–2404, 2003     

Influence of copolymer composition of polyestercarbonate on miscibility with poly(butylene terephthalate)

Blends of poly(butylene terephthalate) (PBT) and polyestercarbonate (PEC), copolyesters consisting of polycarbonate (PC) and polyarylate (PAr), have been studied by thermal analysis to determine miscibility. The PBT blends with PAr and PEC containing 30 wt % of carbonate unit or less appeared to be miscible, and the tendency for stable single‐phase was observed to decrease as the content of carbonate unit in PEC copolymer increased. As determined with the crystalline phase behavior, the miscibility of PEC with PBT appeared to have a maximum around 10 ∼ 30 wt % of carbonate content in PEC copolymer, and this result was attributed to the internal repulsion effect between ester and carbonate repeating units in PEC copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 803–811, 2000     

用X-射线衍射法测定聚对苯二甲酸乙二醇酯/聚对苯二甲酸丁二醇酯共混体系的结晶度

结晶度是表征聚合物性质的重要参数,它对聚合物的物理和机械性能有很大影响,在测定聚合物的结晶度的各种方法中,X-射线衍射法的意义明确且应用最为广泛。然而,用X-射线衍射法测定聚合物结晶度绝大部分只限于单组份体系,用于共混体系的报道尚不     

DSC analysis of post-yield deformed pbt. Effects of thermal history

The effect of the deformation temperature on the energy stored in post-yield deformed poly(butylene terephthalate) PBT, was studied by means of DSC tests. Deformed specimens were rapidly cooled after unloading, in order to avoid the energy relaxation processes occurring before the DSC measurements. Cooling revealed to have a significant contribution on the whole stored energy, as shown by DSC tests conducted on undeformed PBT specimens conditioned at various temperatures. This work is aimed at separating the effects due to cooling and those ascribed to deformation on the energy storage and release processes, permitting to better understand previous findings on post-yield compressed PBT.     

生物可降解聚乙二醇-b-聚对苯二甲酸丁二醇酯共聚物载药微球的制备

嵌段共聚物;生物可降解性;左炔诺孕酮;载药性;生物可降解聚乙二醇-b-聚对苯二甲酸丁二醇酯共聚物载药微球的制备     

Isothermal and non-isothermal crystallisation kinetics of pCBT and PBT

The crystallisation behaviour of in situ polymerised cyclic butylene terephthalates (pCBT) and poly(butylene terephthalate)s (PBT) were studied by differential scanning calorimetry (DSC) both under isothermal and non-isothermal conditions. The crystallisation was analysed by adopting the Avrami, Ozawa and Kissinger methods for the isothermal and non-isothermal crystallisations, respectively. An Avrami exponent n between 2 and 3 was found for the pCBTs whereas the exponent ranged between 3 and 4 for the PBTs. The Ozawa exponent m varied for all materials between 2 and 3. Differences in the crystallisation kinetics were also reflected in the related activation energy data.     

Mechanical properties of dual-phase polymer electrolytes prepared from poly(styrene-co-butadiene) rubber/poly(acrylonitrile-co-butadiene) rubber mixed latices

Mechanical properties of two dual-phase polymer electrolytes (DPEs), prepared from poly(styrene-co-butadiene) rubber (SBR) and poly(acrylonitrile-co-butadiene) rubber (NBR) latices, are studied. Both DPEs are composed of an SBR supporting phase and an ionconductive phase of NBR/lithium salt solution. The first DPE maintains a tensile strength of 0.5 MPa and elongation of 280% with an ionic conductivity of 10^?3 S/cm. Although the glass transition relaxations based on the dual-phase structure are not resolved in this DPE because of the proximity of the glass transition temperatures of the SBR and NBR, the glass transition shifts to a lower temperature due to the plasticization by the lithium salt solution. In the second DPE, two distinctive glass transition relaxations, corresponding to the SBR and NBR phases, are observed in the viscoelasticity versus temperature measurement, indicating the dual-phase structure. A simple equivalent mechanical model, which is modified from the Takayanagi model, is introduced to elucidate the mechanical behavior of the dual-phase structure in the second DPE. According to this model, 8% of DPE is a mechanically continuous SBR phase in the tensile direction, which effectively gives mechanical support to the DPE. © 1995 John Wiley & Sons, Inc.     

The morphological,mechanical, rheological,and thermal properties of PLA/PBAT blown films with chain extender

Biodegradable poly(lactic acid) (PLA)/poly(butylene adipate‐co‐terephthalate) (PBAT) blends and films were prepared using melt blending and blowing films technique in the presence of chain extender‐Joncryl ADR 4370F. The ADR contains epoxy functional groups and used as a compatibilizer. The morphological, mechanical, rheological, thermal, and crystalline properties of the PLA/PBAT/ADR blown films were studied. Scanning electron microscopy micrographs of the films revealed more ductile deformation with increasing PBAT content. The addition of PBAT enhanced the toughness of the PLA film. Tensile tests indicated that the elongation at break increased from 20.5% to 334.6% in the machine direction and from 7.1% to 715.9% in the transverse direction. The Young modulus increased from 2690.5 to 395.6 MPa in the machine direction and from 2623.5 to 154.0 MPa in the transverse direction. The sealing strength of 40/60/0.15 PLA/PBAT/ADR film was the highest among all the samples up to 9.4 N 15 mm⁻¹. These findings gave important implications for designing and manufacturing polymer packaging materials.     

Transesterification and crystallization behavior of poly(butylene succinate)/poly(butylene terephthalate) block copolymers

The block copolymers of poly(butylene succinate) (PBS) and poly(butylene terephthalate) (PBT) were synthesized by melt processing for different times. The sequence distribution, thermal properties, and crystallization behavior were investigated over a wide range of compositions. For PBS/PBT block copolymers it was confirmed by statistical analysis from ¹H-NMR data that the degree of randomness (B) was below 1. The melting peak (T_m) gradually moved to lower temperature with increasing melt processing time. It can be seen that the transesterification between PBS and PBT leads to a random copolymer. From the X-ray diffraction diagrams, only the crystal structure of PBS appeared in the M1 copolymer (PBS 80 wt %) and that of PBT appeared in the M3 (PBS 50 wt %) to M5 (PBS 20 wt %) copolymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 147–156, 1998     

Nucleation and growth of gas barrier aluminium oxide on surfaces of poly(ethylene terephthalate) and polypropylene: effects of the polymer surface properties

The nucleation and initial stages of growth of aluminium oxide deposited on two different polymer surfaces [poly(ethylene terephthalate), (PET) and amorphous polypropylene, (PP)] have been studied by atomic force microscopy (AFM). The permeation of water vapor and oxygen through the films has been measured. The initial stages of the growth of the oxide consisted of separated islands on the polymer surface. Further growth of oxide depends strongly on the surface morphology and chemical nature of the polymer surface. Growth on PET follows a layer‐by‐layer mechanism that maintains the native surface roughness of the polymer substrate. Growth on PP, however, follows an island mode, which leads to an increase in surface roughness. This may be due to a lack of chemical bonding between the polymer and the arriving metal–oxygen particles. The oxide layer on PET grows more densely than on PP, providing superior barrier to gas permeation. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3151–3162, 2000     

Chain extension of polyesters PET and PBT with two new diimidodiepoxides. II

Two new diglycidyl ester compounds containing preformed imide rings for better thermal stability were prepared to be used as chain extenders for PET and PBT. The preparation of these compounds was carried out in two steps. In the first step, diimidodiacids were prepared from pyromellitic anhydride and 3-aminopropanoic acid or 4-(aminomethyl)benzoic acid. From these diimidoacids, in a second step, diimidodiepoxides were obtained by reaction with epichlorohydrin. The aforementioned diimidodiepoxides were used as chain extenders for poly(ethylene terephthalate) (PET) and poly(butylene terephthalate) (PBT) with satisfactory results. The polyester samples obtained from various residence times in the reactor, were characterized by solution viscosity measurements, carboxyl, and hydroxyl end-group determination. Starting from a PET having intrinsic viscosity ([η]) of 0.60 dL/g and carboxyl content (CC) of 42 equiv/10⁶ g, one could obtain PET with [η] of 1.16 and CC below 5 equiv/10⁶ g. The typical reaction condition for the coupling of PET was its heating with the chain extender under argon atmosphere above its melting temperature (280°C) for several minutes. Analogous results were obtained for PBT. The hydroxyl content in all cases was increased. © 1996 John Wiley & Sons, Inc.     

Reactive blending of functional polysiloxanes with poly(butylene terephthalate): Clarification of reaction mechanisms and kinetics from a model compound study

We clarify the reaction mechanisms and kinetics in melt‐reacted blends consisting of functional polysiloxanes and poly(butylene terephthalate) (PBT) with a model compound study. As models for polysiloxanes, we have selected two monodisperse ω‐functionalized siloxane oligomers with Si? H and Si? vinyl moieties. To mimic PBT, we have chosen low molecular weight compounds representative for in‐chain and end‐functional groups of the polymer; ester, carboxylic acid, alcohol, and vinyl. Uncatalyzed and platinum‐catalyzed reactions have been performed in sealed vials. Reaction products have been characterized by gradient polymer elution chromatography, Fourier transform infrared spectroscopy, and size exclusion chromatography. PBT functional groups reactive toward functional siloxane oligomers at high temperatures in the presence and absence of a catalyst have been identified, and an estimate of relative reaction kinetics has been provided. We suggest reaction mechanisms compatible with our results and with literature data. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1952–1961, 2002