Synthesis and enzymatic degradation of 2‐methylene‐1,3‐dioxepane and methyl acrylate copolymers

Copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and methyl acrylate (MA) containing ester units both in the backbone and as pendant groups were synthesized by free‐radical copolymerization. The influence of reaction conditions such as the polymerization time, temperature, initiator concentration, and comonomer feed ratio on the yield, molecular weight, and copolymer composition was investigated. The structure of the copolymers was confirmed by ¹H NMR, ¹³C NMR, and IR spectroscopy. Differential scanning calorimetry indicated that the copolymers had a random structure. An NMR study showed that hydrogen transfer occurred during the copolymerization. The reactivity ratios of the comonomers were r_MDO = 0.0235 and r_MA = 26.535. The enzymatic degradation of the copolymers obtained was carried out in the presence of proteinase K or a crude enzyme extracted from earthworms. The experimental results showed that the higher ester molar percentage in the backbone caused a faster degradation rate. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2898–2904, 2003     

Grafting of commercially available amines bearing aromatic rings onto poly(vinylidene‐co‐hexafluoropropene) copolymers

The grafting of poly(VDF‐co‐HFP) copolymers with different amines containing aromatic rings, such as aniline, benzylamine, and phenylpropylamine, is presented. ¹⁹F NMR characterization enabled us to show that the sites of grafting of aromatic‐containing amines were first difluoromethylene of vinylidene fluoride (VDF) in the hexafluoropropene (HFP)/VDF/HFP triad and then that of VDF adjacent to HFP. The kinetics of grafting of benzylamine, monitored by ¹H NMR spectroscopy, confirmed those sites of grafting and showed that all VDF units located between two HFPs were grafted in the first 150 min, whereas those adjacent to one HFP unit were grafted in the remaining 3000 min. Parameters such as the temperature or the molar percentage of HFP in the copolymer had an influence on the maximum rate of grafted benzylamine. The higher the temperature, the higher the molar percentage of grafted benzylamine. Furthermore, the higher the molar percentage of HFP in the copolymer, the higher the molar percentage of VDF in the HFP/VDF/HFP triad, and the higher the molar percentage of grafted benzylamine. The spacer length between the aromatic ring and the amino group had an influence on the kinetics of grafting: aniline (pK_a = 4.5) could not add onto the polymeric backbone, whereas phenylpropylamine was grafted in the first 150 min, and benzylamine required 3000 min to reach the maximum amount of grafting. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1855–1868, 2006     

Synthesis and properties of vinyl‐terminated and silicon‐containing polysulfones and polyketones

4‐Fluorophenylsulfonylphenyl‐terminated polysulfone and 4‐fluorobenzoylphenyl ketone were prepared with bisphenol A and an excess of bis‐(4‐fluorophenyl)sulfone or 4,4′‐difluorobenzophenone, respectively, at 160 °C using potassium carbonate in N,N‐dimethylacetamide. The resulting polymers were reacted with 4‐hydroxystyrene to synthesize vinyl‐terminated polysulfones and ketones. The silicon‐containing polysulfones and ketones were prepared from the vinyl‐terminated polymer precursor and various H‐functional silanes or siloxanes. The synthesis of silicon‐containing polymers was achieved by hydrosilation with a rhodium catalyst. It was shown that the hydrosilation reaction proceeds with 55:45 chemoselectivity. The resulting polymers were investigated by ¹H NMR spectroscopy, DSC, and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2937–2942, 2001     

Polymeric ruthenium bipyridine complexes: New potential materials for polymer solar cells

Methyl methacrylate‐containing bipyridine monomers were synthesized with a hydoxy‐functionalized bipyridine. The 4′‐methyl group of the 2,2′‐bipyridine was used to introduce hydoxy‐functionalized alkyl spacers of two different lengths. Two, different synthetic routes were applied for the preparation of the hydoxy‐functionalized bipyridine via a bromo‐(C₇ spacer) or a silylated‐(C₃ spacer) intermediate. A copolymer of poly(methyl methacrylate) with bipyridine units in the side chains was prepared by free‐radical copolymerization and characterized with ¹H NMR, ultraviolet–visible, and IR spectroscopy as well as gel permeation chromatography. The bipyridine units of the copolymer were reacted with ruthenium bipyridine precursors. The resulting graft copolymers displayed promising photophysical and electrochemical properties, opening interesting perspectives for applications in the field of solar‐cell devices. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 374–385, 2004     

An insight into molecular motions and phase composition of gliadin/glutenin glycerol blends studied by 13C solid‐state and 1H time‐domain NMR

Monitoring of the molecular motions and secondary structures of gliadin (Gli) and glutenin (Glu) in blends with 10, 20, 30, and 40% glycerol was performed by solid‐state (SS) and time domain (TD) NMR spectroscopy. Increasing the glycerol content increased the relative amount of β‐sheets and disordered structures, while decreasing α‐helices in Gli/Glu–glycerol blends studied by ¹³C CPMAS NMR. For ≥20% glycerol samples, the protein side‐chain mobility increased similarly for Gli and Glu. A higher proportion of α‐helices versus β‐sheets was found in Gli‐glycerol blends compared with Glu–glycerol blends. Glycerol acted as “immobilized” in 10–20% glycerol Gli samples and was found mainly “free” in 30 and 40% glycerol Gli/Glu samples. During temperature experiments, 30 and 40% glycerol amounts impacted the dynamic molecular behavior of the Gli and Glu proteins differently than lipids, as observed by TD‐NMR. The combination of TD‐NMR together with SS‐NMR showed details of the dynamic molecular variations in Gli/Glu protein structure and are promising techniques to monitor the molecular dynamics of plasticized proteins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 739–750     

Substituent effect of the ester moiety of epoxysuccinates on the polycondensation with diamine

Di‐2,2,2‐trichloroethyl cis‐epoxysuccinate, di‐2‐cyanoethyl cis‐epoxysuccinate, and di‐2‐methoxyethyl cis‐epoxysuccinate were synthesized, and the substituent effect of the epoxysuccinates on the polycondensation with diamine was studied. The order of reactivities of the epoxysuccinates with m‐xylylenediamine was as follows: di‐trichloroethyl ester ≫ di‐cyanoethyl ester > di‐methoxyethyl ester, such was also confirmed by the model reaction of the epoxysuccinate with benzylamine. ¹H NMR and IR spectroscopic study and ab initio calculation also well explained the reactivity order. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 504–508, 2000     

Synthesis and characterization of benzimidazolium‐functionalized polysulfones as anion‐exchange membranes

Anion‐exchange membranes containing pendant benzimidazolium groups were synthesized from polysulfone by chrolomethylation followed by nucleophilic substitution reaction with 1‐methylbenzimidazole. The structures of the polymers were characterized by ¹H‐NMR and FTIR analysis. The resulting membranes showed high thermal stability below 200 °C. The values of water uptake and swelling degree increased with the ion‐exchange capacity of the polymeric membrane. The ionic conductivity was measured by means of impedance spectroscopy in aqueous solution of potassium hydroxide (10^?4?10^?1 M). The results show not only a clear correlation between the membrane's electrochemical behavior with the electrolyte solution embedded in the membrane, but also with the degree of the polysulfone's chloromethylation.Thus, the ionic conductivity increased more than two orders of magnitude when the degree of chloromethylation increased from 40 to 140%. Benzimidazolium‐functionalized polysulfones exhibited better thermal, mechanical, and electrochemical properties than the widely used polymeric membranes containing quaternary ammonium groups. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2363–2373     

Conjugation of arginine–glycine–aspartic acid peptides to thermoreversible N‐isopropylacrylamide polymers

Thermoreversible polymeric biomaterials are finding increased acceptance in tissue engineering applications. One drawback of the polymers is their synthetic nature, which does not allow direct interaction of mammalian cells with the polymers. This limitation may be alleviated by grafting arginine–glycine–aspartic acid (RGD) containing peptides onto the polymer backbone to facilitate interactions with cell‐surface integrins. Toward this goal, N‐isopropylacrylamide (NiPAM)‐based thermoreversible polymers containing amine‐reactive N‐acryloxysuccinimide (NASI) groups were synthesized. Conjugation of RGD‐containing peptides to polymers was demonstrated with ¹H NMR spectroscopy and reverse‐phase high‐pressure liquid chromatography. The conjugation reaction was optimal at 4 °C and pH of 8.0, and increased with the increasing NASI content of polymers. With a peptide grafting ratio of 0.25 mol %, there was no significant change in the lower critical solution temperature of the polymers. Finally, the NASI‐containing polymers, cast as films, on tissue culture polystyrene, were shown to conjugate to RGD‐containing peptides and support C2C12 cell attachment. We conclude that NASI‐containing thermoreversible polymers are amenable for grafting biomimetic peptides to impart cell adhesiveness to the polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3989–4000, 2003     

Metal‐template synthesis of cyclic epoxide–amine oligomers: Uncrosslinked epoxide–amine addition polymers, 47

The addition reaction of 2,2‐bis‐[4‐(2,3‐epoxypropoxy)‐phenyl]‐propane (DGEBA) and preformed complexes of metal ions and disecondary diamines led to a large quantity of cyclic epoxide–amine oligomers. As shown by gel permeation chromatographic analysis, cycles of n = 1, 2, and 3 were formed. Functional epoxide end groups of the prepared oligomers were completely missing in the IR and ¹H NMR and ¹³C NMR spectra. In the fast atom bombardment and matrix‐assisted laser desorption/ionization mass spectra, the molecular ions of the n = 1, 2, 3 cycles of DGEBA and N,N′‐dibenzyl‐5‐oxanonanediamine‐1,9 were detected at m/z = 680, 1361, and 2042. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2047–2052, 2003     

Synthesis and characterization of hyperbranched aromatic poly(ether imide)s with terminal amino groups

We synthesized an AB₂‐type monomer, 4‐{4‐[di(4‐aminophenyl)methyl]phenoxy}phthalic acid, which contained one phthalic acid group and two aminophenyl functionalities. The direct self‐polycondensation of the AB₂‐type monomer in the presence of triphenylphosphite as an activator afforded a hyperbranched poly(ether imide) with a large number of terminal amino groups. This polymer was characterized with ¹H NMR and IR spectroscopy. The degree of branching of the hyperbranched poly(ether imide) was approximately 56%, as determined by a combination of model compound studies and an analysis of ¹H NMR spectroscopy integration data. The terminal amino groups underwent functionalization readily. The solubility and thermal properties of the resulting polymers depended on the nature of the chain end groups. In addition, the hyperbranched poly(ether imide) was grafted with polyhedral oligomeric silsesquioxane (POSS). Transmission electron microscopy analysis revealed that the grafted POSS molecules aggregated to form a nanocomposite material. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3726–3735, 2003     

Synthesis of biodegradable amphiphilic AB‐type diblock copolymers of lactide and depsipeptide with pendant reactive groups

The syntheses of amphiphilic AB‐type diblock copolymers composed of hydrophobic polylactide segment and hydrophilic polydepsipeptide segment with amino or carboxyl groups were performed. The protected cyclodepsipeptides cyclo[Glc‐Lys(Z)] and cyclo[Glc‐Asp(OBzl)] (where Glc is glycolic acid, Lys is lysine, Asp is aspartic acid, Z is benzyloxycarbonyl, and OBzl is benzyl) were first polymerized in tetrahydrofuran (THF) with potassium ethoxide as an initiator to obtain the corresponding protected polydepsipeptides. After the terminal hydroxyl groups of the protected polydepsipeptides were converted into the potassium alcoholates with K/naphthalene, L ‐lactide was polymerized in the presence of the corresponding polymeric alcoholates as macroinitiators in THF to obtain poly[Glc‐Lys(Z)]‐block‐poly(L ‐lactide) and poly[Glc‐Asp(OBzl)]‐block‐poly(L ‐lactide). Subsequent deprotection of Z and OBzl groups gave the objective amphiphiles poly(Glc‐Lys)‐block‐poly(L ‐lactide) and poly(Glc‐Asp)‐block‐poly(L ‐lactide), respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1218–1225, 2002     

New soluble functional polymers by free‐radical copolymerization of methacrylates and bipyridine ruthenium complexes

The luminescent complex [4‐(3‐hydroxypropyl)‐4′‐methyl‐2,2′‐bipyridine]‐bis(2,2′‐bipyridine)‐ruthenium(II)‐bis(hexafluoroantimonate) and its methacrylate derivative were successfully synthesized and fully characterized by two‐dimensional ¹H and ¹³C{¹H} NMR techniques [correlation spectroscopy (COSY) and heteronuclear multiple‐quantum coherence experiment (HMQC)], as well as matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry. The respective labeled methyl methacrylate‐ruthenium(polypyridyl) copolymers were obtained by free‐radical copolymerization with methyl methacrylate and were characterized utilizing NMR, IR, and UV–visible spectroscopy and gel permeation chromatography. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3954–3964, 2003     

Synthesis,characterization, and physical properties of new copolymers of poly(amino acid)–urethane—copolymers of γ‐methyl‐L‐glutamate‐N‐carboxyanhydride and urethane prepolymer

New copolymers of amino acid and urethane (PAU), in which a polyurethane segment was combined with poly(γ‐methyl‐L‐glutamate) (PMLG) of various contents, were synthesized by the copolymerization of the polyurethane prepolymer (UPP) having isocyanate groups at both terminals of the chain and γ‐methyl‐L ‐glutamate‐N‐carboxyanhydride (NCA) to improve the elastic recovery and adhesion of PMLG for application of PMLG to synthetic leather. The copolymerization of the UPP with NCA was carried out by applying the reactivity of isocyanate and the polymerization mechanism of NCA using the primary amine and tertiary amine as initiators. Infrared (IR) and ¹³C‐NMR spectra of these PAUs as well as the chemical analysis of the PAU intermediates showed that the PAUs would have a multiblock–triblock structure: namely, the PAUs consisted of the block copolymer segments of urethane and a small amount of PMLG at the center of the copolymer chain and most of the PMLG at both terminals of the copolymer chain. The elastic recovery and adhesion of these PAUs were significantly larger than those of the PMLG with the maintenance of a good sense of touch, which was a unique asset of PMLG. Furthermore, it was found that the PAUs had intermediary moisture permeability between that of PMLG and polyurethane. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 383–389, 1999     

Star polymers by cross‐linking of linear poly(benzyl‐L‐glutamate) macromonomers via free‐radical and RAFT polymerization. A simple route toward peptide‐stabilized nanoparticles

Poly(benzyl‐L ‐glutamate) (PBLG) macromonomers were synthesized by N‐carboxyanhydride (NCA) polymerization initiated with 4‐vinyl benzylamine. MALDI‐ToF analysis confirmed the presence of styrenic end‐groups in the PBLG. Free‐radical and RAFT polymerization of the macromonomer in the presence of divinyl benzene produced star polymers of various molecular weights, polydispersity, and yield depending on the reaction conditions applied. The highest molecular weight (M_w) of 10,170,000 g/mol was obtained in a free‐radical multibatch approach. It was shown that the PBLG star polymers can be deprotected to obtain poly(glutamic acid) star polymers, which form water soluble pH responsive nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Ionic organic/inorganic materials. I. Novel cationic siloxane copolymers containing quaternary ammonium salt groups in the backbone

The synthesis and characterization of some novel cationic siloxanes copolymers containing quaternary ammonium salt (QAS) groups in the backbone is reported in this article. One cationic oligomer having QAS in the backbone and reactive groups like 2,3‐epoxypropyl and 2‐hydroxy‐3‐chloropropyl (RCO) as well as 1,3‐bis(3‐aminopropyl)tetramethyldisiloxane or α,ω‐bis(3‐aminopropyl)oligodimethylsiloxane (AP) were used as precursors for this goal. Elemental analysis, IR and ¹H NMR spectroscopy, thermogravimetric analysis, and X‐ray photoelectron spectroscopy were used to characterize the obtained copolymers. The thermal stability of the cationic siloxane copolymer increased when the siloxane oligomer having a high number of siloxane units in the chain (AP) was used as a precursor. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3570–3578, 2002     

Ionic organic/inorganic materials. II. New linear and crosslinked poly(ethylene oxide)‐based ionomers by quaternization with chloroalkyl‐functionalized siloxanes

Siloxane‐modified cationic polyelectrolytes were synthesized through the quaternization reaction of a poly(ethylene glycol)‐based polymer containing tertiary amine groups in the chain with chloroalkyl‐functionalized siloxanes. Linear or crosslinked structures were obtained, depending on the functionality of the siloxane: a chloroalkyl‐monofunctionalized or ‐polyfunctionalized siloxane was used. The reaction occurred in solution with n‐propanol as a solvent and NaI as a catalyst. All products were characterized with elemental analysis and IR and ¹H NMR spectrometry. Viscometric measurements of the linear polymer in dilute aqueous solutions revealed typical polyelectrolyte behavior. The swelling capacities in various solvents of the crosslinked structures were determined. The thermal stability of the crosslinked cationic structures obtained with a polyfunctional siloxane as a quaternization agent was much higher than that of the parent polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3720–3728, 2004     

Free radical and thermal curing of terpyridine‐modified terpolymers

Terpolymers bearing terpyridine as well as (meth)acrylates as free radical curable groups (UV‐curing) or hydroxyl groups (thermal curing with bis‐isocyanates) were synthesized and characterized using ¹H NMR, IR and UV‐vis spectroscopy as well as GPC. Subsequently, the ability of covalent crosslinking via the UV‐initiated polymerization of the acrylate groups was investigated. Moreover, the thermal covalent crosslinking via the reaction of hydroxyl functionalized terpolymer and bis‐isocyanate compounds could be successfully achieved. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4028–4035, 2004     

Strontium‐based initiator system for ring‐opening polymerization of cyclic esters

An amino isopropoxyl strontium (Sr‐PO) initiator, which was prepared by the reaction of propylene oxide with liquid strontium ammoniate solution, was used to carry out the ring‐opening polymerization (ROP) of cyclic esters to obtain aliphatic polyesters, such as poly(ε‐caprolactone) (PCL) and poly(L ‐lactide) (PLLA). The Sr‐PO initiator demonstrated an effective initiating activity for the ROP of ε‐caprolactone (ε‐CL) and L‐lactide (LLA) under mild conditions and adjusted the molecular weight by the ratio of monomer to Sr‐PO initiator. Block copolymer PCL‐b‐PLLA was prepared by sequential polymerization of ε‐CL and LLA, which was demonstrated by ¹H NMR, ¹³C NMR, and gel permeation chromatography. The chemical structure of Sr‐PO initiator was confirmed by elemental analysis of Sr and N, ¹H NMR analysis of the end groups in ε‐CL oligomer, and Fourier transform infrared (FTIR) spectroscopy. The end groups of PCL were hydroxyl and isopropoxycarbonyl, and FTIR spectroscopy showed the coordination between Sr‐PO initiator and model monomer γ‐butyrolactone. These experimental facts indicated that the ROP of cyclic esters followed a coordination‐insertion mechanism, and cyclic esters exclusively inserted into the Sr–O bond. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1934–1941, 2003     

Wettability of poly(styrene‐co‐acrylate) ionomers improved by oxygen‐plasma source ion implantation

The surfaces of poly(styrene‐co‐acrylic acid) copolymers and their Na‐ and Cs‐neutralized ionomers were modified by O₂‐plasma source ion implantation (PSII) treatment to improve the surface wettability. The changes in the surface wettability, composition, and structure upon the PSII treatment were examined with contact‐angle measurements and X‐ray photoelectron spectroscopy. The untreated surfaces of the acid copolymers and ionomers exhibited different surface energies; this implied clearly that the type of ion species affects the surface hydrophilicity. Also, the PSII treatment induced oxygen‐containing groups to reside on the surface and ionic groups to come out toward the surface; this made the surfaces of the ionomers more hydrophilic as compared with that of the acid copolymers. The ionomers also showed slow hydrophobic recovery. Thus, it was suggested that the reduced mobility of the polymer chain because of the presence of ionic aggregates results in restricted reorientation of oxygen‐containing groups. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1791–1797, 2003     

Unsaturated alkoxy‐substituted poly(p‐phenylene 1,3,4‐oxadiazole)s: Synthesis and chemical–physical characterization

A new series of alkoxy‐substituted poly(p‐phenylene 1,3,4‐oxadiazole)s modified by the insertion of small percentages of various comonomers were synthesized through the precursor polyhydrazides. The comonomers used contained trans double bonds or meta‐alkoxy‐substituted aromatic rings to improve the solubility of the final polymers. The synthesized copolymers were chemically characterized by ¹H NMR and Fourier transform infrared spectroscopy. In some cases, the copolymers really showed improved solubility in organic solvents. The ¹⁵N solid‐state NMR technique was applied to examine the degree of conversion from the precursor polyhydrazides to the final polymers, which determined the effective conjugated length in the target polyoxadiazoles. Thermal stability and structural characteristics of all the polymers as well as a preliminary investigation on the optical properties of polyoxadiazoles are also reported. The copolymers retained high absorbance in the UV region and high transmission in the whole telecommunication range. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3916–3928, 2003