Synthesis of amino‐functionalized latex particles by a multistep method

Cationic latex particles with surface amino groups were prepared by a multistep batch emulsion polymerization. In the first one or two steps, monodisperse cationic latex particles to be used as the seed were synthesized, and in the third step, two different amino‐functionalized monomers [aminoethylmethacrylate hydrochloride (AEMH) and vinylbenzylamine hydrochloride (VBAH)] were used to synthesize the final functionalized latex particles. 2,2′‐Azobisisobutyramidine dihydrochloride was used as the initiator, and different concentrations of two quaternary ammonium emulsifiers with hydrophobic chains of different lengths were examined. To characterize the final latexes yields were obtained gravimetrically, and particle size distributions and average particle diameters were determined by transmission electron microscopy and photon correlation spectroscopy. The amount of amino groups was determined by fluorimetry. The effect of the amino‐functional monomer used on the final latexes and the colloidal behavior of the system were studied. The influence of the different conditions utilized to synthesize the latexes on the colloidal stability of the particles was evaluated in terms of the Fuchs stability ratio and electrophoretic mobility. High yields of the amino‐functional monomers were obtained. Surface amino, amidine, and quaternary ammonium groups provided the cationic character. The colloidal stability behavior of the products obtained was compatible with their cationic character. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2929–2936, 2001     

Kinetics of the batch cationic emulsion polymerization of styrene: A comparative study with the anionic case

An in‐depth study on the kinetics of the cationic emulsion polymerization of styrene in a batch reactor is presented. This study is focused on the effect of the amount of the cationic surfactant dodecyltrimethylammonium bromide (DTAB), using two different cationic initiators: 2,2′‐azobisisobutyramidine dihydrochloride (AIBA), 2,2′‐azobis (N,N′‐dimethyleneisobutyramidine) dihydrochloride (ADIBA), on kinetics and colloidal features such as conversion, number of particles, number average of radicals per particle, mean particle diameter, and particle size distribution (PSD) of the polystyrene latices obtained by emulsion polymerization in a batch reactor. Furthermore, the results of the cationic emulsion polymerization were compared with its homologous anionic case. Using DTAB as cationic surfactant an expected increase in the total rate of polymerization was observed when the DTAB concentration increased. However, the total number of particles increased much more than in the anionic system. On the other hand, a dependence on the particle size of the rate of polymerization per particle together with the average number of radicals per particle was found. These differences between cationic and anionic emulsion polymerizations were explained taking into account the limited particle coagulation observed with cationic surfactants, and the high rate of radical formation of cationic initiators. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4461–4478, 2006     

Synthesis of latex particles with surface amino groups

Monodisperse latex particles with surface amino groups were prepared by a two‐step emulsion polymerization. In the first step, the seeds were synthesized by batch emulsion polymerization of styrene; and in the second step, two different amino‐functionalized monomers [aminoethylmethacrylate hydrochloride (AEMH) and vinylbenzylamine hydrochloride (VBAH)], two different initiator systems (K₂S₂O₈ and K₂S₂O₈/Na₂S₂O₅) and mixtures of emulsifiers sodium dodecylsulfate (SDS) and Tween 21 were used to synthesize the final latexes. To characterize the final latexes, conversions were obtained gravimetrically and particle size distributions and average particle diameters were determined by transmission electron microscopy (TEM) and photon correlation spectroscopy (PCS). The amount of amino groups was determined by the SPDP (N‐succinimidyl 3‐(2‐pyridyldithio)propionate) method. The influence of the different conditions used to synthesize the latexes on the colloidal stability of the particles was evaluated by measuring the diameters of the final latexes dispersed in solutions at different pHs and ionic strengths. The most stable latexes were obtained using the smallest seed, VBAH monomer, and the K₂S₂O₈/Na₂S₂O₅ initiator system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4230–4237, 2000     

Highly magnetic latexes from submicrometer oil in water ferrofluid emulsions

The synthesis of functionalized submicrometer magnetic latex particles is described as obtained from a preformed magnetic emulsion composed of organic ferrofluid droplets dispersed in water. Composite (polystyrene/γ‐Fe₂O₃) particles were prepared according to a two‐step procedure including the swelling of ferrofluid droplets with styrene and a crosslinking agent (divinyl benzene) followed by seeded emulsion polymerization with either an oil‐soluble [2,2′‐azobis(2‐isobutyronitrile)] or water‐soluble (potassium persulfate) initiator. Depending on the polymerization conditions, various particle morphologies were obtained, ranging from asymmetric structures, for which the polymer phase was separated from the inorganic magnetic phase, to regular core–shell morphologies showing a homogeneous encapsulation of the magnetic pigment by a crosslinked polymeric shell. The magnetic latexes were extensively characterized to determine their colloidal and magnetic properties. The desired core–shell structure was efficiently achieved with a given styrene/divinyl benzene ratio, potassium persulfate as the initiator, and an amphiphilic functional copolymer as the ferrofluid droplet stabilizer. Under these conditions, ferrofluid droplets were successfully turned into superparamagnetic polystyrene latex particles, about 200 nm in size, containing a large amount of iron oxide (60 wt %) and bearing carboxylic surface charges. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2642–2656, 2006     

Preparation and characterization of cationic polystyrene latex particles of different aminated surface charges

Functionalized polystyrene latex particles were obtained either by seed particle functionalization or by the shot-growth procedure using 2,2′-azobis (2-amidino-propane) dihydrochloride as an initiator and vinylbenzylamine hydrochloride as a cationic monomer. The capabilities of both processes to produce functionalized particles in terms of functionalization yields coming from surface amino group titrations were compared. Different titration methods were performed and a new technique was introduced using fluorescamine.     

Synthesis of poly(chitosan‐N‐isopropylacrylamide) complex particles with the method of soapless dispersion polymerization

Crosslinked poly(chitosan‐N‐isopropylacrylamide) [poly(NIPAAM‐chitosan)] complex particles were successfully synthesized with the method of soapless dispersion polymerization. The anionic initiator ammonium persulfate (APS) and the cationic initiator 2,2′‐azobis(2‐methylpropionamidine) dihydrochloride (AIBA) were used to initiate the copolymerization. The poly(NIPAAM‐chitosan) copolymer particles synthesized with APS as the initiator had a homogeneous morphology, whereas the copolymer particles synthesized with AIBA as the initiator showed a core–shell morphology. In addition, various variables such as the particle size, reaction rate, and ζ potential were taken into account. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2053–2063, 2003     

Semicontinuous seeded cationic emulsion polymerization of styrene: The effects of the concentration and type of cationic surfactant

The objective of this work was to analyze the effects of the concentration and type of cationic surfactant on the kinetic features (instantaneous and overall conversions) and colloidal characteristics [mean particle diameter, particle size distribution (PSD), and surface charge density] in the semicontinuous seeded cationic emulsion polymerization of styrene. 2,2′‐Azobis(N,N′‐dimethyleneisobutyramidine)dihydrochloride was used as an initiator. The surfactants were dodecyltrimethylammonium bromide (DTAB) and hexadecyltrimethylammonium bromide (HDTAB). So that the evolution of some polymeric and colloidal characteristics of the synthesized latices could be followed, the overall and instantaneous conversions were defined and determined gravimetrically. The PSDs and average particle diameters were determined by transmission electron microscopy and photon correlation spectroscopy. The surface charge density was determined by conductimetric titration. The evolution of the instantaneous conversions, the total number of particles, and the PSDs of the different reactions were related to the nucleation, growth, and coagulation processes taking place in the semicontinuous seeded emulsion polymerizations. The PSDs obtained from the reactions carried out with the emulsifier DTAB, at a concentration equal to its critical micelle concentration (cmc) and at a concentration twice its cmc, presented more and smaller particles than those obtained by the addition of HDTAB to the polymerization recipe. At lower emulsifier concentrations equal to half of the cmc, the system had lower colloidal stability with DTAB. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2322–2334, 2003     

Polymeric ruthenium bipyridine complexes: New potential materials for polymer solar cells

Methyl methacrylate‐containing bipyridine monomers were synthesized with a hydoxy‐functionalized bipyridine. The 4′‐methyl group of the 2,2′‐bipyridine was used to introduce hydoxy‐functionalized alkyl spacers of two different lengths. Two, different synthetic routes were applied for the preparation of the hydoxy‐functionalized bipyridine via a bromo‐(C₇ spacer) or a silylated‐(C₃ spacer) intermediate. A copolymer of poly(methyl methacrylate) with bipyridine units in the side chains was prepared by free‐radical copolymerization and characterized with ¹H NMR, ultraviolet–visible, and IR spectroscopy as well as gel permeation chromatography. The bipyridine units of the copolymer were reacted with ruthenium bipyridine precursors. The resulting graft copolymers displayed promising photophysical and electrochemical properties, opening interesting perspectives for applications in the field of solar‐cell devices. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 374–385, 2004     

Nucleation of gold nanoparticles on latex particle surfaces

Gold particles were nucleated on functionalized (i.e., sulfonate or imidazole groups) latex particle surfaces. Gold ions were associated with the functional groups present on the surface of the latex particles by metal‐ligand formation and were then reduced to nucleate gold particles on the particle surface. The use of imidazole groups favored the metal‐ligand formation more effectively compared with sulfonic acid groups, so gold nucleation was investigated on the surface of imidazole‐functionalized model latex particles. The desorption of gold atoms or their surface migration first occurred during the reduction process and then gold nanoparticles were nucleated. The utilization of strong reductants, such as NaBH₄ and dimethylamine borane (DMAB) under mildly acidic conditions (i.e., pH 4) led to the deprotonation of imidazole‐rich polymer chains present on the surface of the model latex particles followed by deswelling of hydrophilic polymer surface layers. As a result, well‐dispersed gold nanoparticles were embedded in the hydrophilic polymer surface. On the other hand, the use of weak reductants led to the formation of localized gold aggregates on the surface of the latex particles. The removal of residual styrene monomer is very important because gold ions can be coordinated with the vinyl groups present in styrene monomer and would then be reduced by nucleophilic water addition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 912–925, 2008     

Preparation and characterization of biotinylated and enzyme‐immobilized heterobifunctional latex particles as nanobio devices

A novel biotinylated and enzyme‐immobilized nanobio device was prepared with heterobifunctional composite latex particles. Hemispherical poly(glycidyl methacrylate‐co‐divinylbenzene)/polystyrene [P(GMA‐DVB)/PSt] particles with epoxy and hydroxyl groups were prepared by soap‐free seeded emulsion polymerization with P(GMA‐DVB) seed particles. Hydroxyl groups were introduced to PSt chain terminals in the seeded stage by adding 2‐mercaptoethanol as a chain‐transfer agent. To obtain the desired hemispherical structure particles, we studied the effects of the preswelling process, the type and amount of solvents added in the seeded polymerization step, the weight ratio of the secondary monomer (styrene) to the seed particle (M/P), and the type of initiators. Under suitable conditions, heterobifunctional P(GMA‐DVB)/PSt was obtained, which was confirmed by observing the binding of streptavidin–colloidal gold with transmission electron microscopy (TEM). To obtain biotinylated and enzyme‐immobilized particles, 5‐(N‐succinimidyloxycarbonyl)pentyl D‐biotinamide was first reacted with the hydroxyl group on the PSt domain of the particle. Pyruvate kinase (PK) was then directly immobilized to the biotinylated particles through a reaction with the epoxy group in the PGMA domain. The monolayer of PK on the latex particle surface was considered to be formed by covalent binding. The activity of immobilized PK was almost conserved, even after being stored at 4 °C for 48 days. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 562–574, 2005     

Tailoring of carboxyl‐decorated magnetic latex particles using seeded emulsion polymerization

In this research, submicron and carboxyl‐functionalized magnetic latex particles were elaborated by using seeded emulsion polymerization technique in presence of oil‐in‐water (o/w) magnetic emulsion as seed. The polymerization conditions were optimized in order to get well‐defined latex particles with magnetic core and polymer shell bearing carboxylic (–COOH) functionality. Starting from (o/w) magnetic emulsion as seed, synthesis process was performed by copolymerization of styrene (St) monomer with the cross‐linker divinylbenzene (DVB) in presence of 4,4′‐azobis(4‐cyanopentanoic acid) (ACPA) as a carboxyl‐bearing initiator. The prepared magnetic latex particles were first characterized in terms of particle size, chemical composition, morphology, magnetic properties, magnetic content, and colloidal stability using various techniques, e.g. particle size analyzer using dynamic light scattering (DLS) technique, Fourier transform infrared, transmission electron microscopy, vibrating sample magnetometer, thermogravimetric analysis, and zeta potential measurements as a function of pH of the dispersion media, respectively. The prepared magnetic latex particles were then used as second seed for further functionalization with methacrylic acid (MAA) in order to enhance carboxylic groups on the magnetic particle's surface. The results showed that final magnetic latex particles possessed spherical morphology with core‐shell structure and enriched carboxylic acid functionality. More importantly, they exhibited superparamagnetism with high magnetic content (58.42 wt%) and high colloidal stability, which considered as the main requirements for their application in the biomedical diagnostic domains. Copyright © 2017 John Wiley & Sons, Ltd.     

Acetal‐functionalized polymer particles useful for immunoassays. II. Surface and colloidal characterization

Monodisperse polymer colloids with dimethyl and diethyl acetal functionalities were synthesized by a two‐step emulsion polymerization process. The first step consisted of a batch emulsion homopolymerization of styrene (St). The dimethyl and diethyl acetal functionalities were obtained by batch emulsion terpolymerization of St, methacrylic acid (MAA), and methacrylamidoacetaldehyde dimethyl acetal (MAAMA) or methacrylamidoacetaldehyde diethyl acetal (MAADA) in the second step, onto the previously formed polystyrene latex particles. The latexes were characterized by TEM and conductimetric titration, in order to obtain the particle size distribution and the amount of carboxyl and acetal groups on the surface, respectively. The chemical stability of the functionalized surface groups during the storage time was analyzed. The hydrophilic character of the surface of the polymer particles was determined by means of nonionic emulsifier titration. The colloidal stability of the synthesized latexes was studied by measuring the critical coagulation concentration (CCC) against KBr electrolyte, and the existence of a hairy layer on the surface of the latex particles was analyzed by measuring the hydrodynamic particle diameter at several electrolyte concentrations. The surface functionalized groups remained stable for 2 years. The relative hydrophilic character and the colloidal stability were affected by the pH of the medium. On the other hand, the higher the surface charge, the larger the thickness of the hairy layer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 501–511, 1999     

Synthesis and characterization of mid‐ and end‐chain functional telechelics by controlled polymerization methods and coupling processes

Well‐defined polystyrene‐ (PSt) or poly(ε‐caprolactone) (PCL)‐based polymers containing mid‐ or end‐chain 2,5 or 3,5‐ dibromobenzene moieties were prepared by controlled polymerization methods, such as atom transfer radical polymerization (ATRP) or ring opening polymerization (ROP). 1,4‐Dibromo‐2‐(bromomethyl)benzene, 1,3‐dibromo‐5‐(bromomethyl)benzene, and 1,4‐dibromo‐2,5‐di(bromomethyl)benzene were used as initiators in ATRP of styrene (St) in conjunction with CuBr/2,2′‐bipyridine as catalyst. 2,5‐Dibromo‐1,4‐(dihydroxymethyl)benzene initiated the ROP of ε‐caprolactone (CL) in the presence of stannous octoate (Sn(Oct)₂) catalyst. The reaction of these polymers with amino‐ or aldehyde‐functionalized monoboronic acids, in Suzuki‐type couplings, afforded the corresponding telechelics. Further functionalization with oxidable groups such as 2‐pyrrolyl or 1‐naphthyl was attained by condensation reactions of the amino or aldehyde groups with low molecular weight aldehydes or amines, respectively, with the formation of azomethine linkages. Preliminary attempts for the synthesis of fully conjugated poly(Schiff base) with polymeric segments as substituents, by oxidative polymerization of the macromonomers, are presented. All the starting, intermediate, or final polymers were structurally analyzed by spectral methods (¹H NMR, ¹³C NMR, and IR). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 727–743, 2006     

Formation of highly monodispersed emulsifier-free cationic poly(methylstyrene) latex particles

Highly monodispersed emulsifier-free poly(methylstyrene) (PMS) latex particles were prepared via an emulsifier-free emulsion polymerization in the presence of 2,2′-azobis-(2-amidineopropane) dihydrochloride (V-50) as an initiator. A combination of kinetics and molecular weight distribution studies revealed that the polymerization followed the micellization nucleation mechanism. Results showed that an appropriate initiator concentration was necessary to obtain monodisperse and stable latex particles. Conversion of methylstyrene was found to increase significantly with increasing initiator concentrations. However, the size of PMS latex particles decreased with both the increase of initiator concentration and the reaction temperature at a constant ionic strength. The particle size was increased as the ionic strength of the aqueous phase increased, yet the variation of ionic strength had little effect on the particle size distribution. SEM micrographs showed that an agitation rate of 350 rpm or higher was required in order to produce highly monodispersed poly(methylstyrene) latex particles. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2069–2074, 1999     

Latex particles bearing hydrophilic grafted hairs with controlled chain length and functionality synthesized by reversible addition–fragmentation chain transfer

A method is described for synthesizing latex particles with anchored hairs by the grafting of hydrophilic chains, synthesized by reversible addition–fragmentation chain transfer, onto functionalized latex particles. These have the potential to bind biologically active species. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1188–1195, 2003     

Grafting of amino functional monomer onto initiator-modified polystyrene particles

Polystyrene nanoparticles with grafted chains of an amino functionalized polymer were prepared by a two-step polymerization process. In the first step, the polystyrene seed particles were synthesized by the conventional batch emulsion polymerization using terpolymer HAS (hydroperoxide monomer, acrylic acid, and styrene) as a surface-active initiator. The surface of the obtained particles contains carboxyl groups, which are responsible for the latex stability, and residual undecomposed hydroperoxide groups. Therefore, in the second step, an amino functional monomer was grafted onto the hydroperoxide modified polystyrene particles by a "grafting from" approach. X-ray photoelectron spectroscopy, NMR, and scanning electron microscopy were used to examine the surface of the amino functionalized particles. The amount of incorporated amino groups onto the particles was determined by fluorescenometric titration. In general, the number of amino groups on the particle surface increased with the increase of the functional monomer content in the reaction mixture. The incorporation of the functional monomer was also confirmed by electrophoretic measurements. Final particles possess amphoteric character due to the presence of amino and carboxyl groups on the surface. Adsorption of human immunoglobulins G onto the amino functionalized particles was studied as a function of pH and ionic strength. The covalent binding of human IgG was performed using the glutaraldehyde preactivation method. The immunoreactivity of the latex-IgG complex was examined by the latex agglutination test.     

From hydroxyurethane methacrylates to hybrid nonisocyanate polyurethanes

New hybrid polyhydroxyurethane networks were quantitatively synthesized by radical polymerization of new hydroxyurethane methacrylate (HUMA) prepolymers. These HUMAs were synthesized in several steps. First, bis(cyclic carbonate) poly(propylene oxide) was reacted with two different diamines (ethylene diamine and 2,2′‐(ethylenedioxy)diethylamine) in excess. Then, these end‐functionalized hydroxyurethane prepolymers were converted into end‐functionalized hydroxyl prepolymers by ring opening of ethylene carbonate. Finally, a methacrylate function was grafted to the hydroxyl functions. All these steps were performed at room temperature. These prepolymers were thermally either homopolymerized or copolymerized using benzylmethacrylate or poly(ethylene oxide) bisphenol A dimethacrylate as comonomers, leading to new hybrid nonisocyanate polyurethane networks with various properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Ultrahigh molecular weight polyethylene produced by a bis(phenoxy‐imine) titanium complex supported on latex particles

The applicability of latex particle supports for non‐Cp type metallocene catalysts for ethylene polymerization is presented. Polystyrene latex particles were prepared by miniemulsion polymerization and functionalized with poly(ethyleneoxide)chains and pyridyl groups on the surface. These latex particles were chosen to demonstrate that a support with nucleophilic substituents on the surface can act as a carrier for a (phenoxy‐imine) titanium complex (titanium FI‐catalyst) to produce ultrahigh molecular weight polyethylene (UHMWPE). The composition of the support, the concentration of pyridyl groups on the surface, and the crosslinking of the support were optimized to provide a system where the FI‐catalyst resulted in the formation of polyethylene with a M_w of more than 6,000,000 and a relatively narrow molecular weight distribution of 3.0 ± 0.5. High activities for long polymerization times greater than 6 h resulted in a catalyst system exhibiting productivities of up to 15,000 g PE/g cat. or 7,000,000 g PE/g Ti. The resulting polymer properties showed that nucleophilic groups on the latex particle support did not negatively impact the catalyst by blocking the active site but instead created a stable environment for the titanium catalyst. In particular, pyridyl groups on the surface of the latex particle stabilized the catalyst system probably by trapping trimethylaluminium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3103–3113, 2006     

High‐throughput experimentation in atom transfer radical polymerization: A general approach toward a directed design and understanding of optimal catalytic systems

High‐throughput experimentation (HTE) was successfully applied in atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) for the rapid screening and optimization of different reaction conditions. A library of 108 different reactions was designed for this purpose, which used four different initiators [ethyl 2‐bromoisobutyrate, methyl 2‐bromopropionate, (1‐bromoethyl)benzene, and p‐toluenesulfonyl chloride], five metal salts (CuBr, CuCl, CuSCN, FeBr₂, and FeCl₂), and nine ligands (2,2′‐bipyridine and its derivatives). The optimal reaction conditions for Cu(I) halide, CuSCN, and Fe(II) halide‐mediated ATRP systems with 2,2′‐bipyridine and its 4,4′‐dialkyl‐substituted derivatives as ligands were determined. Cu(I)‐mediated systems were better controlled than Fe(II)‐mediated ones under the examined conditions. A bipyridine‐type ligand with a critical length of the substituted alkyl group (i.e., 4,4′‐dihexyl 2,2′‐bipyridine) exhibited the best performance in Cu(I)‐mediated systems, and p‐toluenesulfonyl chloride and ethyl 2‐bromoisobutyrate could effectively initiate Cu(I)‐mediated ATRP of MMA, resulting in polymers with low polydispersities in most cases. Besides, Cu(I) halide‐mediated ATRP with 4,5′‐dimethyl 2,2′‐bipyridine as the ligand and p‐toluenesulfonyl chloride as the initiator proved to be better controlled than those with 4,4′‐dimethyl 2,2′‐bipyridine as the ligand, and polymers with much lower polydispersities were obtained in the former cases. This successful HTE example opens up a way to significantly accelerate the development of new catalytic systems for ATRP and to improve the understanding of structure–property relationships of the reaction systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1876–1885, 2004     

Reverse atom transfer radical polymerization of butyl methacrylate in a miniemulsion stabilized with a cationic surfactant

The miniemulsion reverse atom transfer radical polymerization of butyl methacrylate was carried out with cetyltrimethylammonium bromide (CTAB) as the sole surfactant. The polymerizations were initiated with 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane] dihydrochloride and mediated with copper(II) bromide/tris[2‐di(2‐ethylhexyl acrylate)aminoethyl]amine. The living character was demonstrated by the linear increase in the number‐average molecular weight with conversion and the decreasing polydispersity index with conversion. The polymerizations were conducted at 90 °C with 1 wt % CTAB with respect to the monomer and produced a coagulum‐free latex with a mean particle diameter of 155 nm. The resulting latexes exhibited good shelf‐life stability. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1628–1634, 2006