Multifunctional materials based on polyazomethines derived from 2,5‐dihydroxy‐1,4‐benzoquinone and siloxane diamines

New polyazomethines have been synthesized by the reaction between 2,5‐dihydroxy‐1,4‐benzoquinone and siloxane diamines differing by the siloxane sequence length. A dimer has also been prepared as a model compound. The products were characterized by spectral (FTIR and ¹H‐NMR) and elemental analyses, GPC, viscosity measurements, solubility tests, and transmission electron microscopy (TEM). The different properties have been investigated by adequate techniques: thermal (DSC and TGA), spectral (UV–vis and fluorescence spectroscopy), redox (Differential Pulse Voltammetry). pH‐sensitivity and metal complexing ability were also evaluated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1862–1872, 2008     

Chelate polymers. IV. siloxanes functionalized with chelating groups derived from hydroxy‐ketones,their metal complexes and some polymers

New ligands were obtained by the reaction of 1,3‐bis(3‐aminopropyl)tetramethyldisiloxane, with acetylacetone, 2,4‐dihydroxybenzophenone and 2,4‐dihydroxyacetophenone. The structures were confirmed by electronic, IR and ¹H NMR spectroscopy and elemental analysis. The change of the refractive index of the siloxanes by their chemical modification was also examined. These compounds were used for coordination of some divalent metals. The ligands and their metal complexes were both soluble in common solvents, such as CHCl₃, dimethylformamide, dimethylsulfoxide, N‐methyl‐2‐pyrrolidone. Some of the bifunctional chelates were inserted into polymeric structures by polycondensation with the diacid chloride of bis(p‐carboxyphenyl)diphenylsilane. Copyright © 2005 John Wiley & Sons, Ltd.     

Chelate polymers: II. Some novel transition metals complexes with azomethine‐containing siloxanes and their polyesters

New Schiff bases of 2,4‐dihydroxybenzaldehyde with siloxane‐α,ω‐diamines having different numbers of siloxane units in the chain have been synthesized and characterized by spectroscopy, elemental and thermal analyses. These azomethines were found to form complexes readily with copper(II), nickel(II), cobalt(II), cadmium(II) and zinc(II). From IR and UV–Vis studies, the phenolic oxygen and imine nitrogen of the ligand were found to be the coordination sites. Thermogravimetric analysis (TGA) data indicate the chelates to be more stable than the corresponding ligands. The melting points increase with shortening of the siloxane segment from azomethine, as well as the result of complexation. The chelates obtained were covalently inserted in polymeric linear structures by polycondensation through the OH‐difunctionalized ligand with 1,3‐bis(carboxypropyl)tetramethyldisiloxane. Direct polycondensation, assisted either by acetic anhydride or N,N′‐dicyclohexylcarbodiimide as dehydrating agent and the complex 4‐(dimethylamino)pyridinium 4‐toluenesulfonate as catalyst, was used for the synthesis of these compound types. The structures of the polymers obtained were confirmed by IR, UV and ¹H NMR. Characterization was undertaken by TGA, solubility tests and viscosity measurements. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of imidazole‐terminated hyperbranched polymers with POSS‐branching points and their pH responsive and coordination properties

An imidazole‐terminated hyperbranched polymer with octafunctional POSS branching units denoted as POSS‐HYPAM‐Im was prepared by the polymerization of excess amounts of tris(2‐aminoethyl)amine with the first‐generation methyl ester‐terminated POSS‐core poly(amidoamine)‐typed dendrimer, reacting with methyl acrylate, and ester‐amide exchange reaction with 3‐aminopropylimidazole. The imidazole‐terminated hyperbranched poly(amidoamine) denoted as HYPAM‐Im was also synthesized with 1‐(3‐aminopropyl)imidazole from a methyl ester‐terminated hyperbranched poly(amidoamine) by the ester‐amide exchange reaction. The transmittance of the POSS‐HYPAM‐Im solution drastically decreased when the solution pH was greater than 8.2. On the other hand, the transmittance of the HYPAM‐Im solution gradually decreased when the solution pH at 8.5 and was greater than 9. Spectrophotometric titrations of the hyperbranched polymer aqueous solutions with Cu²⁺ ions indicated the variation of the coordination modes of POSS‐HYPAM‐Im from the Cu²⁺–N₄ complex to the Cu²⁺–N₂O₂ complex and the existence of the only one complexation mode of Cu²⁺–N₄ between Cu²⁺ ion and HYPAM‐Im with increasing the concentrations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2695–2701     

Spectroscopic studies of interactions in poly(N‐acryloyl‐N′‐methylpiperazine)/acidic polymer complexes

Poly(N‐acryloyl‐N′‐methylpiperazine) (PAMP) forms complexes with four strong acidic polymers, namely, poly(styrenesulfonic acid), poly(vinylphosphonic acid), poly(acrylic acid) and poly(methacrylic acid) in ethanol/water (1:1) solution. The nature of interpolymer interactions in various complexes was studied by Fourier transform infrared (FTIR) spectroscopy and X‐ray photoelectron spectroscopy (XPS). Both the carbonyl oxygen and the amide nitrogen of PAMP are involved in hydrogen‐bonding interactions. Some of the amine nitrogens of PAMP are protonated and therefore PAMP also interacts with the acidic polymers through ionic interactions. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 501–508, 2000     

Synthesis of conjugated polymers with pendant ruthenium terpyridine trithiocyanato complexes and their applications in heterojunction photovoltaic cells

Two conjugated polymers based on poly(phenylenethiophene) and poly (fluorenethiophene) main chain functionalized with pendant trithiocyanato ruthenium terpyridine complexes were synthesized by the Suzuki coupling reaction. The ruthenium complexes can extend the absorption band to longer wavelength and enhance the photosensitivity in this region. The polymers exhibit very broad absorption band spanning from 400 to 750 nm due to the presence of π‐conjugated system and the ruthenium complexes. Such enhancement in optical absorption enables the utilization of solar light in the near IR region. By space charge limited current modeling, the hole carrier mobilities of the polymers were calculated to be in the order of 10^?4 cm² V^?1 s^?1, which greatly facilitate the transport of charges after the separation of excitons. Heterojunction photovoltaic cells with simple structure ITO/polymer/C₆₀/Al were fabricated. Under simulated AM1.5 solar light illumination, the short circuit currents, open circuit voltages, and power conversion efficiencies of the photovoltaic cells were measured to be 1.53–2.58 mA cm^?2, 0.12–0.24 V, and 0.084–0.12%, respectively. Deposition of PEDOT:PSS on ITO surface did not show significant difference in device performance. Plot of incident photon to charge efficiency as the function of wavelength suggests that absorption by both conjugated main chain and ruthenium complex are essential to the photocurrent generation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1305–1317, 2008     

Photoelectron spectroscopy on organic surfaces: X‐ray degradation of oxygen‐plasma‐treated and chemically reduced poly(propylene) surfaces in comparison to conventional polymers

The X‐ray‐induced sample damage during mono XPS analysis of an oxygen‐plasma‐oxidized and subsequently wet‐chemically reduced poly(propylene) film was investigated as a showcase for plasma‐modified or plasma‐deposited samples. By doing this, the degradation index approach as introduced by Beamson and Briggs in the Scienta ESCA300 high‐resolution XPS database of organic polymers has been adopted. As to be expected, the sample degrades by loosing oxygen as revealed by observation of decreasing O/C and C OR/C_sum ratios. However, the X‐ray degradation indices are definitely higher than those of conventional reference polymers. Moreover, the C OR/C_sum degradation index is significantly higher in comparison with one obtained for the O/C ratio. In that context, there is no difference between the plasma sample and a conventional poly(vinyl alcohol) polymer. It is concluded that for reliable quantitative surface chemical analysis, the quality of spectra in terms of acquisition times must be optimized aimed to a minimization of X‐ray degradation. Finally, it is proposed to describe the photon flux of an X‐ray gun in an XPS experiment, which defines the degradation rate at the end, by using the sample current simply measured with a carefully grounded sputter‐cleaned reference silver sample. Copyright © 2009 John Wiley & Sons, Ltd.     

Coordination of nickel and copper dithiolate to 2,2′‐bipyridine‐based π‐conjugated polymers

π‐Conjugated polymers (Poly1–Poly3) containing a 2,2′‐bipyridine (bpy) unit were subjected to coordination to nickel and copper dithiolate for the purpose of manipulating the photophysical properties. The absorption maximum peak of Poly1 [maximum wavelength (λ_max) = 446 nm] redshifted by 36 nm upon the coordination of bpy to NiCl₂, which produced Poly1–NiCl₂. A further bathochromic shift was observed in the spectrum of Poly1–mntNi [mntNi = (maleonitrile dithiolate)nickel; λ_max = 499 nm] bearing the dithiolate ligand, which stemmed from the extension of the conjugated system over the nickel dithiolate moiety through the bpy unit. An increase in the [Ni]/[bpy] ratio in Poly1–mntNi rendered the original maximum peak at 446 nm smaller and the lower energy charge‐transfer peak at 499 nm larger; the isosbestic points remained at 380 and 475 nm. The green fluorescence (λ_max = 504 nm) emitted from Poly1 markedly diminished upon the coordination of nickel dithiolate because of the effective energy transfer. The absorption maximum peak of Poly1–mntNi in chloroform at 499 nm blueshifted to 471 nm when the volume ratio of the chloroform/N,N‐dimethylformamide solvent reached 10:90. The coordination of nickel dithiolate to Poly2 and Poly3 also brought about redshifts of the absorption maximum peaks of as much as 55 and 61 nm, respectively. The absorption maximum peak of Poly1–(phenyldithiolate)nickel(pdtNi) (λ_max = 474 nm) redshifted by 28 nm in comparison with that of Poly1, whereas the magnitude of the shift of Poly1–bis(thiophenoxide)nickel(btpNi) bearing two thiophenoxide ligands was 20 nm. Poly1–mntCu with a tetrahedral copper center was also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2631–2639, 2004     

XPS studies of Ni deposition on polymethyl methacrylate and poly(styrene‐co‐acrylonitrile)

Thin Ni layers were deposited onto clean polymethyl methacrylate (PMMA) and poly(styrene‐co‐acrylonitrile) (SAN) surfaces by a high vacuum thermal evaporation process. The resulting interfaces were studied by X‐ray photoelectron spectroscopy. The Ni deposition on PMMA changes the relative intensity of the C1s spectra associated with the O CO and C O carbon species, and modifies the shape of the O1s peak, while the Ni evaporation on SAN alters the C1s band intensity assigned to the CN moiety and gives a second N1s band at low binding energies. These observations suggest the formation of new chemical species at the interface between Ni and the PMMA ester group, and between Ni and the SAN nitrile group, which are the most reactive sites on these two polymers. Copyright © 2000 John Wiley & Sons, Ltd.     

Reactivity of 2,2′‐Bis(2N‐(1,1′,3,3′‐tetramethyl‐guanidino))diphenylene‐amine with CuI and [Cu(MeCN)4][PF6]: Benzimidazole Formation vs. Cu Oxidation

The reaction of 2,2′‐Bis(2N‐(1,1′,3,3′‐tetramethyl‐guanidino))diphenylene‐amine (TMG₂PA) ( 1 ) with CuI in MeCN results in the formation of [Cu^II(TMG₂PA^amid)I] ( 2 ) indicatingthat Cu^I is the target of an oxidative attack of the N‐H proton of the ligand which itself is converted to molecular hydrogen. In contrast, if [Cu(MeCN)₄][PF₆] is used as the Cu^I source, [Cu^I₂(TMGbenz)₂][PF₆]₂ ( 3 ) is obtained instead. The use of the non‐coordinating counterion [PF₆]^– apparently prevents Cu^I from oxidation but induces itself a cyclisation reaction within the ligand which results in the formation of a benzimidazole‐guanidine ligand.     

Alternating π‐conjugated copolymer of dithiafulvene with 2,2′‐bipyridyl units

A π‐conjugated polymer containing a dithiafulvene unit and a bipyridyl unit was prepared by cycloaddition polymerization of aldothioketene derived from 5,5′‐diethynyl‐2,2′‐bipyridine. Ultraviolet–visible (UV–vis) absorption spectra showed that the π‐conjugation system of the polymer expanded more effectively than that of a benzene analogue of poly(dithiafulvene) obtained from 1,4‐diethynylbenzene. Cyclic voltammetry measurements indicated that the dithiafulvene–bipyridyl polymer was a weaker electron‐donor polymer than the benzene analogue. These results supported the idea that the incorporation of the electron‐accepting bipyridyl moiety into conjugated poly(dithiafulvene) induced an intramolecular charge‐transfer (CT) effect between the units. Treatment of the dithiafulvene–bipyridyl polymer with bis(2,2′‐bipyridyl)dichlororuthenium (II) [Ru(bpy)₂Cl₂] afforded a ruthenium–polymer complex. A cyclic voltammogram of the complex showed broad redox peaks, which indicated electronic interaction between the dithiafulvene and tris(bipyridyl) ruthenium complex. The dithiafulvene–bipyridyl polymer formed CT complexes with 7,7,8,8‐tetracycanoquinodimethane (TCNQ) in dimethyl sulfoxide. The UV–vis absorption indicated that the resulting CT complex contained anion radical of TCNQ and partially charge‐transferred TCNQ. The polymer showed an unusually high electrical conductivity of 3.1 × 10^?4 S/cm in its nondoped state due to the effective donor–acceptor interaction between the bipyridine unit and the dithiafulvene unit. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4083–4090, 2001     

A detailed surface analytical study of degradation processes in (meth)acrylic polymers

The present study investigates the degradation behavior of various high‐molecular‐weight acrylic polymers (50,000 < M_n/g mol^?1 < 100,000), namely poly(methyl methacrylate) (PMMA), poly(n‐butyl methacrylate) (PBMA), poly(n‐butyl acrylate) (PBA), and poly(lauryl methacrylate) (PLMA), under extreme environmental conditions. These polymers were synthesized via various polymerization techniques to create different end‐groups. The polymers chosen are readily applicable in the formulation of surface coatings and were degraded under conditions which replicate the harsh Australian climate, where surface coatings may reach temperatures of up to 95 °C and are exposed to broad‐spectrum UV radiation of up to 1 kW m^?2. The degradation behavior of the polymeric materials on their surface was followed via ATR‐IR spectroscopy, high resolution FTIR microscopy, and X‐ray photoelectron spectroscopy. The extent of the observed thermal and photo‐oxidation is directly related to the length of the ester side group, with the degradation susceptibility decreasing in the order of PLMA > PBMA/PBA > PMMA, with PMMA still stable even after 5 months exposure to the harshest condition used (UV light at 95 °C). The general degradation mechanism involves the loss of the ester side groups to form methacrylic acid followed by cross‐linking. The effect of the variable end groups was found to be minimal. The results from this study are in good agreement with previous studies of low‐molecular‐weight model polymers under identical conditions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

New Rh(III) complexes of 5‐methyl‐5‐(pyridyl)‐2,4‐imidazolidenedione: Synthesis,X‐ray structure,electrochemical study and catalytic behaviour for hydrogenation of ketones

We describe the reaction of anion [RhCl₆]³⁻ with a series of hydantoin ligands (HL1, HL2 and HL3 = 5‐methyl‐5‐(2‐, 3‐ and 4‐pyridyl)‐2,4‐imidazolidenedione, respectively). Based on spectroscopic, cyclic voltammetric, elemental and MS analyses, the complexes have the general formula K[RhCl₂(L1)₂] ( 1 ), cis ‐ and trans ‐K[RhCl₄(HL2)₂] ( 2a and 2b ) and cis ‐ and trans ‐K[RhCl₄(HL3)₂] ( 3a and 3b ). Complexes 2a , 2b , 3a and 3b were characterized successfully using infrared, ¹H NMR and ¹³C NMR spectral analyses. Dissolution of complex 1 in dimethylsulfoxide (DMSO) led to elimination of one KL1 ligand and coordination of two DMSO molecules as ligands and transformation of this complex to cis ‐ and trans ‐[RhCl₂L1(DMSO)₂] ( 1a and 1b ). Recrystallization led to separation and isolation of crystals of 1a from the initial mixture. X‐ray analysis results showed that this complex was crystallized as solvated complex cis ‐[RhCl₂L1(DMSO)₂]DMSO. The catalytic activity of these complexes was then evaluated for the hydrogenation of various ketones.     

Mixed‐ligand MnII and CuII complexes with alternating 2,2′‐bipyrimidine and terephthalate bridges

The novel polymeric complexes catena‐poly[[diaquamanganese(II)]‐μ‐2,2′‐bipyrimidine‐κ⁴N¹,N^1′:N³,N^3′‐[diaquamanganese(II)]‐bis(μ‐terephthalato‐κ²O¹:O⁴)], [Mn₂(C₈H₄O₄)₂(C₈H₆N₄)(H₂O)₄]_n, (I), and catena‐poly[[[aquacopper(II)]‐μ‐aqua‐μ‐hydroxido‐μ‐terephthalato‐κ²O¹:O^1′‐copper(II)‐μ‐aqua‐μ‐hydroxido‐μ‐terephthalato‐κ²O¹:O^1′‐[aquacopper(II)]‐μ‐2,2′‐bipyrimidine‐κ⁴N¹,N^1′:N³,N^3′] tetrahydrate], {[Cu₃(C₈H₄O₄)₂(OH)₂(C₈H₆N₄)(H₂O)₄]·4H₂O}_n, (II), containing bridging 2,2′‐bipyrimidine (bpym) ligands coordinated as bis‐chelates, have been prepared via a ligand‐exchange reaction. In both cases, quite unusual coordination modes of the terephthalate (tpht²⁻) anions were found. In (I), two tpht²⁻ anions acting as bis‐monodentate ligands bridge the Mn^II centres in a parallel fashion. In (II), the tpht²⁻ anions act as endo‐bridges and connect two Cu^II centres in combination with additional aqua and hydroxide bridges. In this way, the binuclear [Mn₂(tpht)₂(bpym)(H₂O)₄] entity in (I) and the trinuclear [Cu₃(tpht)₂(OH)₂(bpym)(H₂O)₄]·4H₂O coordination entity in (II) build up one‐dimensional polymeric chains along the b axis. In (I), the Mn^II cation lies on a twofold axis, whereas the four central C atoms of the bpym ligand are located on a mirror plane. In (II), the central Cu^II cation is also on a special position (site symmetry ). In the crystal structures, the packing of the chains is further strengthened by a system of hydrogen bonds [in both (I) and (II)] and weak face‐to‐face π–π interactions [in (I)], forming three‐dimensional metal–organic frameworks. The Mn^II cation in (I) has a trigonally deformed octahedral geometry, whereas the Cu^II cations in (II) are in distorted octahedral environments. The Cu^II polyhedra are inclined relative to each other and share common edges.     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

Molybdenum tetracarbonyl complexes with linear chain polyether‐containing Schiff base ligands and their reactivity in the polymerization of methyl methacrylate

Mo(CO)₆ was reacted with the Schiff base ligand obtained by condensation reaction of 2‐acetyl‐ or benzoylpyridine with poly(propylene glycol)bis(2‐aminopropyl ether) to obtain polymeric, dinuclear metal tetracarbonyl compounds. The long‐chain Schiff base complexes are highly soluble even in non‐polar solvents such as petroleum ether, diethyl ether and n‐hexane. These complexes, as free‐radical initiators, afforded methyl methacrylate polymerization in chlorinated solvents. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of phenanthroline‐terminated polymers and their Fe(II)‐complexes

Well‐defined mono‐ and bifunctional, phenanthroline‐terminated poly(ethylene glycol) and polyisobutylene capable of polymer network formation were synthesized. The starting materials mono‐ and bi‐phenanthroline‐ (phen) terminated poly(ethylene glycols) (mPEG‐phen, phen‐PEG‐phen) and polyisobutylenes (PIB‐phen, phen‐PIB‐phen) were prepared by the Williamson synthesis and characterized by means of ¹H NMR and MALDI‐TOF mass spectrometry. According to UV–Vis spectrophotometry and ESI‐TOF mass spectrometry, the phenanthroline‐terminated polymers underwent quantitative complex formation with ferrous ions in solution. The aqueous solution of mPEG‐phen shows self‐assembly behavior. Important parameters, such as critical micelle concentration and hydrodynamic radius of the aggregates were also determined. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2709–2715, 2010     

Synthesis of new Azo‐based liquid crystalline polymers and their selective sensing behaviors to alkali metal ions

We report novel liquid crystalline (LC) polymers containing pendant azobenzene moieties with n‐dodecyl substituents and ethyleneoxy spacers of different lengths and describe their selective detection behaviors to alkali metal ions. The new azopolymers produce homogenous smectic phases with a typical fan‐shaped texture. UV‐Vis and ¹H NMR studies confirm that the azopolymers selectively bind to Li⁺ and Na⁺, but do not complex with K⁺, Ba²⁺, Mg²⁺, or Ca²⁺. Both the ethyleneoxy spacer and azobenzene units participate in binding to Li⁺ and Na⁺ cations in solution. Interestingly, after formation of the complexed structure, the ratio of cis to trans conformer is considerably increased suggesting stronger interactions of the cis conformer with alkali metal ions. Irradiation of the complexed structure with 365 nm UV induces conversion of the uncomplexed trans to the cis. These findings suggest a great potential of the LC azopolymers as selective sensors or separation membranes for alkali metal ions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1713–1723     

Three isotypic polymeric complexes with rare earth cations,but‐2‐enoate anions and 4,4′‐(ethane‐1,2‐diyl)dipyridine and 4,4′‐(ethene‐1,2‐diyl)dipyridine bridging ligands

Three isotypic rare earth complexes, catena‐poly[[aquabis(but‐2‐enoato‐κ²O,O′)yttrium(III)]‐bis(μ‐but‐2‐enoato)‐κ³O,O′:O;κ³O:O,O′‐[aquabis(but‐2‐enoato‐κ²O,O′)yttrium(III)]‐μ‐4,4′‐(ethane‐1,2‐diyl)dipyridine‐κ²N:N′], [Y₂(C₄H₅O₂)₆(C₁₂H₁₂N₂)(H₂O)₂], the gadolinium(III) analogue, [Gd₂(C₄H₅O₂)₆(C₁₂H₁₂N₂)(H₂O)₂], and the gadolinium(III) analogue with a 4,4′‐(ethene‐1,2‐diyl)dipyridine bridging ligand, [Gd₂(C₄H₅O₂)₆(C₁₂H₁₀N₂)(H₂O)₂], are one‐dimensional coordination polymers made up of centrosymmetric dinuclear [M(but‐2‐enoato)₃(H₂O)]₂ units (M = rare earth), further bridged by centrosymmetric 4,4′‐(ethane‐1,2‐diyl)dipyridine or 4,4′‐(ethene‐1,2‐diyl)dipyridine spacers into sets of chains parallel to the [20] direction. There are intra‐chain and inter‐chain hydrogen bonds in the structures, the former providing cohesion of the linear arrays and the latter promoting the formation of broad planes parallel to (010).