Thermal expansion of epoxide–amine networks in the glassy state

The dilatometric curves of 21 epoxide–amine network samples made from five distinct epoxide–amine pairs, with variable amine/epoxide functional ratio values for three of these pairs, were recorded in the 200 K to T_g (glass‐transition temperature) − 50 K temperature range. The curves display a quasiparabolic shape consistent with an expansion law derived from a thermodynamic study [Bongkee, C. Polym Eng Sci 1985, 25(18), 135]: where V and V₀ are the volumes at T and 0 K, respectively, and A is a coefficient that varied for the studied samples between 2.5 × 10⁻⁷ and 5.0 × 10⁻⁷ K⁻². A tentative study of the structure–property relationships in this field revealed that A does not depend significantly on the crosslink density, the cohesive energy density, the T_g, or the local mobility. In contrast, A seems to be sharply related to the chain flexibility, which essentially depends on the aromatic content in the studied structural series. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 537–543, 2000     

Mass spectrometric characterization of telechelic prepolymers and addition polymers of DGEBA–aliphatic amines

Plasma desorption (PD) mass spectra of high molecular weight addition polymers of 2.2-bis-[4-(2.3-epoxypropoxy)phenyl]propane (DGEBA) and benzylamine show protonated molecular ions of the intact polymers and oligomer molecules. In the spectrum of a DGEBA/N,N′-dibenzyl-5-oxanonanediamine-1.9 addition polymer only fragments of the oligomers and a cyclic oligomer are observed. In both polymer spectra there is no indication for side reactions during the addition polymerization such as ether formation. Fast-atom bombardment (FAB) spectra of telechelic prepolymers having amino end groups show the regular oligomers with increasing degree of polymerization and the expected fragmentation products. Only prepolymers with epoxide end groups contain the regular prepolymers as well as side reaction products which are formed by reactions of the telechelics and DGEBA or by reaction of themselves. © 1996 John Wiley & Sons, Inc.     

Polyester polyols: Synthesis and characterization of diethylene glycol terephthalate oligomers

The composition of polyester polyols derived from terephthalic acid (TPA) and diethylene glycol (DEG) was examined. The synthesis of individual oligomers 1 , n is described. The compounds were characterized with ¹H and ¹³C NMR, mass spectrometry, and elemental analyses. The resonance signals arising from aromatic protons in 1 , n = 1–3 were identified in ¹H NMR spectra of TPA‐DEG condensates. From ¹H NMR studies and chromatographic separation, it was concluded that the condensation of TPA and DEG in a 1:2 molar ratio results in a mixture of linear oligomers 1 with the average ñ varying from 1.1 to 2.2, and containing about 2% of cyclic oligomer 2 . © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1114–1123, 2003     

Dehydrocoupling and Diels–Alder reactions on siloxane polymers

Dehydrocoupling reactions between linear poly(methylhydrosiloxane) {Me₃SiO–[MeSi(H)O]_n–SiMe₃} and alcohols such as cholesterol, anthracene‐9‐carbinol, (12‐crown‐4)‐2‐carbinol, pyrene‐1‐carbinol, 4‐methyl‐5‐thiazoleethanol, and 4‐pyridilpropanol were introduced under catalytically mild conditions. The degrees of conversion of Si? H bonds in polysiloxane were monitored with ¹H NMR spectra. The reaction of the 9‐methoxyanthracene adduct on siloxane polymers and maleimide derivatives (maleimide, N‐ethylmaleimide, and maleic acid anhydride) produced [2+4]‐cycloadducts in very high yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4013–4019, 2002     

Visible light‐induced thiol‐ene reaction: A new strategy to prepare Α,ω‐dithiol and Α,ω‐divinyl telechelic polythiolether oligomers

A new strategy is developed to prepare both α,ω‐dithiol and α,ω‐divinyl linear telechelic polythiolether oligomers by visible light induced thiol‐ene chemistry in the presence of a fac‐Ir(ppy)₃ photoredox catalyst. Polythiolether oligomers of well‐defined end groups and controlled molecular weights have been successfully synthesized at varying monomer molar ratios of 1,4‐benzenedimethanethiol (BDMT) to diethylene glycol divinyl ether (DEGVE). ¹H NMR and MALDI‐TOF MS analyses demonstrate that as‐prepared polythiolethers possess high end‐group fidelity, which is further supported by the successful polyaddition of polythiolethers bearing α,ω‐dithiol and α,ω‐divinyl groups. For example, with the α,ω‐dithiol‐ (M_n = 1900 g mol^?1, PDI = 1.25) and α,ω‐divinyl‐terminated (M_n = 2000 g mol^?1, PDI = 1.29) polythiolethers as macromonomers, the molecular weight of resulting polythiolether is up to 7700 g mol^?1 with PDI as 1.67. The reactivity of the terminal thiol group is further confirmed by the addition reaction with N‐(1‐pyrenyl)maleimide. UV‐vis spectra and fluorescene measurements suggest that fac‐Ir(ppy)₃ undergo a redox quenching process reacted with BDMT to generate thiyl free radicals. With these results, the mechanism of the thiol‐ene reaction catalyzed by photoredox catalyst is proposed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 740–749     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

Unusual inorganic phase formation in ultraviolet‐curable organic–inorganic hybrid films

Inorganic–organic hybrid materials were prepared with a cycloaliphatic epoxide adduct of linseed oil with tetraethylorthosilicate (TEOS) oligomers via a cationic UV‐curing process. The TEOS oligomers were prepared in the presence of water and ethanol with hydrochloric acid as a catalyst. The TEOS oligomers were characterized with ¹H and ²⁹Si NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. Hybrid films were cured, and the dynamic mechanical and thermal properties of the hybrid films were evaluated as a function of the TEOS oligomer content. The morphology of the hybrid films was examined with atomic force microscopy, transmission electron microscopy, and small‐angle light scattering. The microscopy and dynamic mechanical data indicated that the hybrid films were heterogeneous materials with various inorganic particle sizes dispersed within the organic matrix. In addition, ²⁹Si solid‐state NMR spectroscopy was used to investigate the coupling between the silicate region and organic regions. A schematic model is proposed to address structural features of hybrid materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1607–1623, 2005     

Darstellung,Kristallstrukturen und Schwingungsspektren von [Pt(N3)6]2– und [Pt(N3)Cl5]2–, 195Pt‐ und 15N‐NMR‐Spektren von [Pt(N3)nCl6–n]2– und [Pt(15NN2)n(N215N)6–n]2–, n = 0–6

Synthesis, Crystal Structures, and Vibrational Spectra of [Pt(N₃)₆]^2– and [Pt(N₃)Cl₅]^2–, ¹⁹⁵Pt and ¹⁵N NMR Spectra of [Pt(N₃)_nCl_6–n]^2– and [Pt(¹⁵NN₂)_n(N₂¹⁵N)_6–n]^2–, n = 0–6 By ligand exchange of [PtCl₆]^2– with sodium azide mixed complexes of the series [Pt(N₃)_nCl_6–n]^2– and with ¹⁵N‐labelled sodium azide (Na¹⁵NN₂) mixtures of the isotopomeres [Pt(¹⁵NN₂)_n(N₂¹⁵N)_6–n]^2–, n = 0–6 and the pair [Pt(¹⁵NN₂)Cl₅]^2–/[Pt(N₂¹⁵N)Cl₅]^2– are formed. X‐ray structure determinations on single crystals of (Ph₄P)₂[Pt(N₃)₆] ( 1 ) (triclinic, space group P1, a = 10.175(1), b = 10.516(1), c = 12.380(2) Å, α = 87.822(9), β = 73.822(9), γ = 67.987(8)°, Z = 1) and (Ph₄As)₂[Pt(N₃)Cl₅] · HCON(CH₃)₂ ( 2 ) (triclinic, space group P1, a = 10.068(2), b = 11.001(2), c = 23.658(5) Å, α = 101.196(14), β = 93.977(15), γ = 101.484(13)°, Z = 2) have been performed. The bond lengths are Pt–N = 2.088 ( 1 ), 2.105 ( 2 ) and Pt–Cl = 2.318 Å ( 2 ). The approximate linear azido ligands with N^α–N^β–N^γ‐angles = 173.5–174.6° are bonded with Pt–N^α–N^β‐angles = 116.4–121.0°. In the vibrational spectra the PtCl stretching vibrations of (n‐Bu₄N)₂[Pt(N₃)Cl₅] are observed at 318–345, the PtN stretching modes of (n‐Bu₄N)₂[Pt(N₃)₆] at 401–428 and of (n‐Bu₄N)₂[Pt(N₃)Cl₅] at 408–413 cm^–1. The mixtures (n‐Bu₄N)₂[Pt(¹⁵NN₂)_n(N₂¹⁵N)_6–n], n = 0–6 and (n‐Bu₄N)₂[Pt(¹⁵NN₂)Cl₅]/(n‐Bu₄N)₂[Pt(N₂¹⁵N)Cl₅] exhibit ¹⁵N‐isotopic shifts up to 20 cm^–1. Based on the molecular parameters of the X‐ray determinations the vibrational spectra are assigned by normal coordinate analysis. The average valence force constants are f_d(PtCl) = 1.93, f_d(PtN^α) = 2.38 and f_d(N^αN^β, N^βN^γ) = 12.39 mdyn/Å. In the ¹⁹⁵Pt NMR spectrum of [Pt(N₃)_nCl_6–n]^2–, n = 0–6 downfield shifts with the increasing number of azido ligands are observed in the range 4766–5067 ppm. The ¹⁵N NMR spectrum of (n‐Bu₄N)₂[Pt(¹⁵NN₂)_n(N₂¹⁵N)_6–n], n = 0–6 exhibits by ¹⁵N–¹⁹⁵Pt coupling a pseudotriplett at –307.5 ppm. Due to the isotopomeres n = 0–5 for terminal ¹⁵N six well‐resolved signals with distances of 0.03 ppm are observed in the low field region at –201 to –199 ppm.     

Stereospecific styrene polymerization and ethylene–styrene copolymerization with titanocenes containing a pendant amine donor

A series of monocyclopentadienyl titanium complexes containing a pendant amine donor on a Cp group ( A = CpTiCl₃, B = Cp^NTiCl₃, C = Cp^NTiCl₂TEMPO, for Cp = C₅H₅, Cp^N = C₅H₄CH₂CH₂N(CH₃)₂, and TEMPO = 2,2,6,6‐tetramethylpiperidine‐N‐oxyl) are investigated for styrene homopolymerization and ethylene–styrene (ES) copolymerization. When activated by methylaluminoxane at 70 °C, complexes with the amine group ( B and C ) are active for styrene homopolymerization and afford syndiotactic polystyrene (sPS). The copolymerizations of ethylene and styrene with B and C yield high‐molecular weight ES copolymer, whereas complex A yields mixtures of sPS and polyethylene, revealing the critical role that the pendant amine has on the polymerization behavior of the complexes. Fractionation, NMR, and DSC analyses of the ES copolymers generated from B and C suggest that they contain sPS. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1579–1585, 2010     

Synthesis and properties of π‐conjugated dithiafulvene oligomers by addition of a monofunctionalized compound

Dithiafulvene oligomers ( 3 ) were prepared by cycloaddition polymerization of aldothioketenes with their alkynethiol tautomers derived from 1,4‐diethynylbenzene ( 2 ) with the addition of 1‐ethynyl‐4‐methylbenzene ( 1 ) as a monofunctionalized compound. Different feed ratios of 2 / 1 were used to control the molecular weights of 3 . The structures of 3 were confirmed by IR and ¹H NMR spectroscopies in comparison with those of 2‐(4‐tolylidene)‐4‐tolyl‐1,3‐dithiol ( 4 ) as a model compound, which was obtained by the treatment of lithium 2‐tolylethynethiolate with water in Et₂O. The number‐average degree of polymerization (DP) and the number‐average molecular weight were measured by gel permeation chromatographic and ¹H NMR analysis. DP increased with an increasing feed ratio of 2 / 1 . The ultraviolet–visible spectra of 3 in diluted acetonitrile showed that the absorption maxima of 3 increased with an increasing DP of 3 . These redshifts are ascribed to an effective expansion of the π‐conjugation system in 3 . The oligomers exhibited a maximum conjugation length of seven repeating units. The redox properties of 3 were examined by cyclic voltammetry. The oxidation half‐peak potentials (E_p/2) of 3 were slightly cathodically shifted with increasing DP. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 708–715, 2003     

13Carbon nuclear magnetic resonance of ethylene–propylene–1‐decene terpolymers

Many studies have been reported on the ¹³C NMR characterization of ethylene–α‐olefin copolymers, but only a few have been reported on terpolymers. The incorporation of an α‐olefin into the polyethylene chain changes the structure and, consequently, the properties of the polymer obtained. Looking for new products, we obtained a series of ethylene–propylene–1‐decene terpolymers with the metallocenic system rac‐ethylene bisindenyl zirconium dichloride/methylaluminoxane. We performed a complete ¹³C NMR characterization of these terpolymers qualitatively and quantitatively. Here we present a detailed study of the ¹³C NMR chemical shifts, triad sequence distributions, monomer average sequence lengths, and reactivity ratios for these terpolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2531–2541, 2003     

Ring-opening polymerization of cyclic carbonates by alcohol–acid catalyst

Ring-opening reactions of 1,3-dioxepan-2-one ( 1 ) and 1,3-dioxan- 2 -one (2) with several alcohols were examined. The reactions proceeded without trifluoroacetic acid (TFA) in low conversions, while they proceeded smoothly with TFA to afford the ring-opened adducts and oligomers. Ring-opening polymerizations of 1 and 2 were also carried out by alcohol–acid catalysts to afford the corresponding polycarbonates (M _n = 2500−6800). The molecular weights increased with increase of the conversions of 1 and 2. The observed polymerization rates of 1 and 2 were determined as 24.4 × 10⁻⁶ and 0.8 × 10⁻⁶ s⁻¹, respectively. Mechanistic aspects were studied by NMR spectroscopy. The methylene protons α and β to the carbonate moieties shifted to lower fields in 0.06–0.11 ppm in the ¹H-NMR spectra by the addition of TFA. Downfield shifts of the carbonyl carbon signals of 1 and 2 were observed in 3.94–4.15 ppm in the ¹³C-NMR spectra. These results strongly suggest that the cyclic carbonates are activated by TFA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2463–2471, 1998     

Solid polymer electrolytes. VI. Microstructure of organic–inorganic hybrid networks composed of 3‐glycidoxypropyltrimethoxysilane and LiClO4 and affected by different synthetic routes

Hybrid organic–inorganic materials derived from 3‐glycidoxypropyltrimethoxylsilane were prepared via two different synthetic routes: (1) the HCl‐catalyzed sol–gel approach of silane followed by the lithium perchlorate (LiClO₄)/HCl‐catalyzed opening of epoxide and (2) the simultaneous gelation of tin/LiClO₄‐catalyzed silane/epoxide groups. LiClO₄ catalyzed the epoxide polymerization, and its effects on the structures of these hybrid materials were studied by NMR. The structure of the inorganic side was probed by solid‐state ²⁹Si NMR spectroscopy, and the characterizations of the organic side and the chemical processes involved in the different synthetic routes were performed with solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR. The different synthetic routes significantly affected the polymerization behaviors of the organic and inorganic sides in the presence of LiClO₄. A larger amount of LiClO₄ promoted the opening of epoxide and led to the formation of longer poly(ethylene oxide) chains via the HCl‐catalyzed sol–gel approach, whereas in the case of the tin‐catalyzed approach, the faster polymerization of the inorganic side hindered the growth of the organic network. The addition of LiClO₄ was proven to be without crystalline salt present in the hybrid networks by wide‐angle X‐ray powder diffraction. Also, the interactions between the ions and hybrid host, examined with Fourier transform infrared and ⁷Li proton‐decoupled magic‐angle‐spinning NMR, further demonstrated that extensive ion aggregation existed in these hybrid materials. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 151–161, 2004     

Bis‐substituted thiophene‐containing oxime sulfonates photoacid generators for cationic polymerization under UV–visible LED irradiation

Three novel types of thiophene‐containing oxime sulfonates with a big π‐conjugated system were reported as non‐ionic photoacid generators. The irradiation of the newly synthesized photoacid generators using near UV–visible light‐emitting diodes (LEDs) (365–475 nm) results in the cleavage of two weak N O bonds in single molecules, which lead to the generation of different sulfonic acids in good quantum and chemical yields. The mechanism for the N O bond cleavage for acid generation was supported by the UV–visible spectra and real‐time ¹H NMR spectra. They are developed as high‐performance photoinitiators without any additives for the cationic polymerization of epoxide and vinyl ether upon exposure to near‐UV and visible LEDs (365–475 nm) at low concentration. In the field of photopolymerization, especially visible light polymerization, it has great potential for application. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 776–782     

Conjugation of arginine–glycine–aspartic acid peptides to thermoreversible N‐isopropylacrylamide polymers

Thermoreversible polymeric biomaterials are finding increased acceptance in tissue engineering applications. One drawback of the polymers is their synthetic nature, which does not allow direct interaction of mammalian cells with the polymers. This limitation may be alleviated by grafting arginine–glycine–aspartic acid (RGD) containing peptides onto the polymer backbone to facilitate interactions with cell‐surface integrins. Toward this goal, N‐isopropylacrylamide (NiPAM)‐based thermoreversible polymers containing amine‐reactive N‐acryloxysuccinimide (NASI) groups were synthesized. Conjugation of RGD‐containing peptides to polymers was demonstrated with ¹H NMR spectroscopy and reverse‐phase high‐pressure liquid chromatography. The conjugation reaction was optimal at 4 °C and pH of 8.0, and increased with the increasing NASI content of polymers. With a peptide grafting ratio of 0.25 mol %, there was no significant change in the lower critical solution temperature of the polymers. Finally, the NASI‐containing polymers, cast as films, on tissue culture polystyrene, were shown to conjugate to RGD‐containing peptides and support C2C12 cell attachment. We conclude that NASI‐containing thermoreversible polymers are amenable for grafting biomimetic peptides to impart cell adhesiveness to the polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3989–4000, 2003     

Poly(N‐phenylmaleimide‐co‐acrylic acid)–copper(II) and poly(N‐phenylmaleimide‐co‐acrylic acid)–cobalt(II) complexes: Synthesis,characterization, and thermal behavior

The free‐radical copolymerization of N‐phenylmaleimide (N‐PhMI) with acrylic acid was studied in the range of 25–75 mol % in the feed. The interactions of these copolymers with Cu(II) and Co(II) ions were investigated as a function of the pH and copolymer composition by the use of the ultrafiltration technique. The maximum retention capacity of the copolymers for Co(II) and Cu(II) ions varied from 200 to 250 mg/g and from 210 to 300 mg/g, respectively. The copolymers and polymer–metal complexes of divalent transition‐metal ions were characterized by elemental analysis, Fourier transform infrared, ¹H NMR spectroscopy, and cyclic voltammetry. The thermal behavior was investigated with differential scanning calorimetry (DSC) and thermogravimetry (TG). The TG and DSC measurements showed an increase in the glass‐transition temperature (T_g) and the thermal stability with an increase in the N‐PhMI concentration in the copolymers. T_g of poly(N‐PhMI‐co‐AA) with copolymer composition 46.5:53.5 mol % was found at 251 °C, and it decreased when the complexes of Co(II) and Cu(II) at pHs 3–7 were formed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4933–4941, 2005     

Thermal latency of novel chelating borate catalysts as latent catalysts for epoxy–phenolic resins

Novel quaternary ammonium bis(2‐oxybenzoyloxy)borate salts ( 1a – 1c ) or quaternary ammonium bis(1,2‐benzenedioxy)borate salts ( 2a and 2b ) with tetra‐n‐butylammonium (TBA⁺), tetra‐n‐octylammonium (TOA⁺), or bis(triphenylphosphoranylidene)ammonium (PNP⁺) cations were synthesized as latent catalysts of epoxy/phenol–novolac resins by the complexation between boric acid and salicylic acid or catechol, followed by neutralization with quaternary ammonium hydroxide. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with 1a – 1c in diglyme at 150 °C for 6 h proceeded up to 85–96% conversions and gave polymers with number‐average molecular weights of 4180–10,500, whereas the polyaddition at 80 °C for 6 h gave less than 8% conversions. However, the polyaddition with 2a containing TBA⁺ cation proceeded to only a 32% conversion at 150 °C for 6 h in diglyme and to a 64% conversion even at 180 °C for 6 h in triglyme and only gave low molecular weight oligomers, and no reaction proceeded in the polyaddition at 80 °C. However, polyaddition with 2b containing PNP⁺ cation proceeded up to a 96% conversion at 150 °C for 6 h in diglyme and gave a higher molecular weight polymer with a number‐average molecular weight of 8050, whereas the polyaddition at 80 °C for 6 h gave only a 5% conversion. The catalytic activity of ammonium borates 1a – 1c and 2a and 2b depended on the borate anion structure: 1a and 1c with bis(2‐oxybenzoyloxy)borate anion revealed higher activity than 2a and 2b with bis(1,2‐benzenedioxy)borate anion, respectively. In comparison with tetra‐n‐butylammonium bromide (TBAB) as a conventional ammonium salt or tetra‐n‐butylammonium tetrakis(benzoyloxy)borate (TBA‐TBB), 1a – 1c and 2b revealed better thermal latency. The catalytic activity of ammonium borates also depended on the bulkiness of the ammonium cation, and the order of activity was 1c (PNP⁺) > 1b (TOA⁺) ≧ 1a (TBA⁺) and 2b (PNP⁺) > 2a (TBA⁺). The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts 1a – 1c and 2a and 2b in bulk at 40 °C was much better than that with TBAB and TBA‐TBB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2702–2716, 2002     

Micellar behavior of well‐defined polystyrene‐based block copolymers with triethoxysilyl reactive groups and their hydrolysis–condensation

Block copolymers of acryloxy propyl triethoxysilane and styrene were prepared through nitroxide‐mediated polymerization using alkoxyamine initiators based on N‐tert‐butyl‐1‐diethylphosphono‐2,2‐dimethylpropyl nitroxide. The copolymers were characterized by ¹H NMR, size exclusion chromatography and differential scanning calorimetry. Their micellar behavior in dioxane/methanol solutions was examined through static light scattering and transmission electron microscopy (TEM). TEM indicated the successful formation of spherical micelles which were subsequently frozen by the sol–gel process. Hydrolysis–condensation of the reactive ethoxysilyl side groups was followed by FTIR, ¹H NMR, and ²⁹Si NMR. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 784–793, 2010     

Well‐defined epoxide‐containing styrenic polymers and their functionalization with alcohols

Polymers containing electrophilic moieties, such as activated esters, epoxides, and alkyl halides, can be readily modified with a variety of nucleophiles to produce useful functional materials. The modification of epoxide‐containing polymers with amines and other strong nucleophiles is well‐documented, but there are no reports on the modification of such polymers with alcohols. Using phenyloxirane and glycidyl butyrate as low molecular weight model compounds, it was determined that the acid‐catalyzed ring‐opening of aryl‐substituted epoxides by alcohols to form β‐hydroxy ether products was significantly more efficient than that of alkyl‐substituted epoxides. An aryl epoxide‐type styrenic monomer, 4‐vinylphenyloxirane (4VPO), was synthesized in high yield using an improved procedure and then polymerized in a controlled manner under reversible addition‐fragmentation chain‐transfer (RAFT) polymerization conditions. A successful chain extension with styrene proved the high degree of chain‐end functionalization of the poly4VPO‐based macro chain transfer agent. Poly4VPO was modified with a library of alcohols and phenols, some of which contained reactive functionalities, e.g., azide, alkyne, allyl, etc., using either CBr₄ (in PhCN at 90 °C for 2–3 days) or BF₃ (in CH₂Cl₂ at ambient temperature over 30 min) as the catalyst. The resulting β‐hydroxy ether‐functionalized homopolymers were characterized using size exclusion chromatography, ¹H NMR and IR spectroscopy, and thermal gravimetric analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1132–1144