Cationic ring‐opening polymerization of monothiocarbonate with a norbornene group

This work deals with the cationic ring‐opening polymerization of cyclic thiocarbonates with a norbornene or norbornane moiety, that is, 5,5‐(bicyclo[2.2.1]hept‐2‐ene‐5,5‐ylidene)‐1,3‐dioxane‐2‐thione ( TC1 ) or 5,5‐(bicyclo[2.2.1]heptane‐5,5‐ylidene)‐1,3‐dioxane‐2‐thione ( TC2 ), respectively. The reaction of TC1 initiated by trifluoromethanesulfonic acid (TfOH), methyl trifluoromethanesulfonate (TfOMe), boron trifluoride etherate (BF₃OEt₂), or triethyloxonium tetrafluoroborate (Et₃OBF₄) afforded unidentified products; however, TC1 underwent cationic ring‐opening polymerization with methyl iodide as an initiator to afford polythiocarbonate because the propagating end was stabilized by the covalent‐bonding property. The polymerization of TC2 initiated by TfOH, TfOMe, BF₃OEt₂, or Et₃OBF₄ afforded polythiocarbonate with good solubility in common organic solvents and a narrow molecular weight distribution because of the absence of a double‐bond moiety. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1698–1705, 2002     

Free‐radical polymerization of dioxolane and dioxane derivatives: Effect of fluorine substituents on the ring opening polymerization

Partially fluorinated and perfluorinated dioxolane and dioxane derivatives have been prepared to investigate the effect of fluorine substituents on their free‐radical polymerization products. The partially fluorinated monomer 2‐difluoromethylene‐1,3‐dioxolane (I) was readily polymerized with free‐radical initiators azobisisobutyronitrile or tri(n‐butyl)borane–air and yielded a vinyl addition product. However, the hydrocarbon analogue, 2‐methylene‐1,3‐dioxolane (II), produced as much as 50% ring opening product at 60 °C by free‐radical polymerization. 2‐Difluoromethylene‐4‐methyl‐1,3‐dioxolane (III) was synthesized and its free‐radical polymerization yielded ring opening products: 28% at 60 °C, decreasing to 7 and 4% at 0 °C and −78 °C, respectively. All the fluorine‐substituted, perfluoro‐2‐methylene‐4‐methyl‐1,3‐dioxolane (IV) produced only a vinyl addition product with perfluorobenzoylperoxide as an initiator. The six‐membered ring monomer, 2‐methylene‐1,3‐dioxane (V), caused more than 50% ring opening during free‐radical polymerization. However, the partially fluorinated analogue, 2‐difluoromethylene‐1,3‐dioxane (VI), produced only 22% ring opening product with free‐radical polymerization and the perfluorinated compound, perfluoro‐2‐methylene‐1,3‐dioxane (VII), yielded only the vinyl addition polymer. The ring opening reaction and the vinyl addition steps during the free‐radical polymerization of these monomers are competitive reactions. We discuss the reaction mechanism of the ring opening and vinyl addition polymerizations of these partially fluorinated and perfluorinated dioxolane and dioxane derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5180–5188, 2004     

Controlled cationic ring‐opening polymerization of cyclic thiocarbonates with ester groups

This work deals with the cationic ring‐opening polymerization of the cyclic thiocarbonates 5‐benzoyloxymethyl‐5‐methyl‐1,3‐dioxane‐2‐thione ( 1 ), 5,5‐dimethyl‐1,3‐dioxane‐2‐thione ( 2 ), and 4‐benzoyloxymethyl‐1,3‐dioxane‐2‐thione ( 3 ). The polymerization was carried out with 2 mol % trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, boron trifluoride etherate, or triethyloxonium tetrafluoroborate as the initiator to afford the polythiocarbonate with a narrow molecular weight distribution accompanying isomerization of the thiocarbonate group. The molecular weight of the obtained polymer could be controlled by the feed ratio of the monomer to the initiator and increased when the second monomer was added to the polymerization mixture after the quantitative consumption of the monomer in the first stage. The block copolymerization of 2 and 3 was also achieved, and this supported the idea that the cationic ring‐opening polymerization of these monomers proceeded via a living process. The order of the polymerization rate was 3 > 2 > 1 . The cationic ring‐opening polymerization of 1 and 3 involved the neighboring group participation of ester groups according to the polymerization rate and molecular orbital calculations with the ab initio method. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 185–195, 2003     

2,3:4,6‐Di‐O‐isopropylidene‐α‐l‐sorbofuranose and 2,3‐O‐isopropylidene‐α‐l‐sorbofuranose

In the title compounds, C₁₂H₂₀O₆, (I), and C₉H₁₆O₆, (II), the five‐membered furanose ring adopts a ⁴T₃ conformation and the five‐membered 1,3‐dioxolane ring adopts an E₃ conformation. The six‐membered 1,3‐dioxane ring in (I) adopts an almost ideal ^OC₃ conformation. The hydrogen‐bonding patterns for these compounds differ substantially: (I) features just one intramolecular O—H...O hydrogen bond [O...O = 2.933 (3) Å], whereas (II) exhibits, apart from the corresponding intramolecular O—H...O hydrogen bond [O...O = 2.7638 (13) Å], two intermolecular bonds of this type [O...O = 2.7708 (13) and 2.7730 (12) Å]. This study illustrates both the similarity between the conformations of furanose, 1,3‐dioxolane and 1,3‐dioxane rings in analogous isopropylidene‐substituted carbohydrate structures and the only negligible influence of the presence of a 1,3‐dioxane ring on the conformations of furanose and 1,3‐dioxolane rings. In addition, in comparison with reported analogs, replacement of the –CH₂OH group at the C1‐furanose position by another group can considerably affect the conformation of the 1,3‐dioxolane ring.     

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectroscopic analysis of telechelic polythiourethanes obtained by the cationic ring‐opening polymerization of six‐membered cyclic thiourethane

A matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectroscopy analysis of polythiourethanes obtained by the cationic ring‐opening polymerization of a six‐membered cyclic thiourethane [3‐benzyltetrahydro‐1,3‐oxazine‐2‐thione (BTOT)] is described. A MALDI‐TOF mass spectrum of a polymer obtained by the polymerization of BTOT with boron trifluoride etherate (BF₃OEt₂) as the initiator in nitrobenzene at 50 °C for 24 h followed by an end‐capping reaction with diethyldithiocarbamic acid diethylammonium salt showed a series of well‐resolved signals that were assignable to polythiourethanes possessing an amino group at the initiating end and a diethyldithiocarbamate group at the terminating end. In comparison with the MALDI‐TOF mass spectra of polymers obtained by polymerization with trifluoromethanesulfonic acid or methyl trifluoromethanesulfonate, the plausible initiating species in the polymerization with BF₃OEt₂ was estimated to be a proton, which successively eliminated carbonyl sulfide to produce a secondary amine group at the initiating end. The secondary amine group in the obtained telechelic polymer was converted to a tertiary amine group by a reaction with benzyl bromide in the presence of triethylamine, and this was confirmed by MALDI‐TOF mass spectroscopy. Furthermore, a telechelic polymer with a pyrrole end group was successfully synthesized by the end‐capping reaction of the growing species in the polymerization of BTOT with sodium 1‐pyrrolecarbodithioate. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4281–4289, 2006     

Cationic polymerization of seven‐membered cyclic monothiocarbonate 1,3‐dioxepan‐2‐thione

The cationic ring‐opening polymerization of a seven‐membered cyclic monothiocarbonate, 1,3‐dioxepan‐2‐thione, produced a soluble polymer through the selective isomerization of thiocarbonyl to a carbonyl group {? [SC(C?O)O(CH₂)₄]_n? }. The molecular weights of the polymer could be controlled by the feed ratio of the monomer to the initiators or the conversion of the monomer during the polymerization, although some termination reactions occurred after the complete consumption of the monomer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1014–1018, 2005     

1,3‐Thia­zolidine derivatives from regioselective [2+3]‐cyclo­additions of azomethine yl­ides with thio­ketones

The title compounds, namely di­methyl (2RS)‐2,3‐di­phenyl‐1,3‐thia­zolidine‐5‐spiro‐2′‐adam­antane‐4,4‐di­carboxyl­ate methanol sol­vate, C₂₈H₃₁NO₄S·0.275CH₄O, and di­methyl (4RS)‐3,4‐di­phenyl‐1,3‐thia­zolidine‐5‐spiro‐9′‐(9′H‐fluorene)‐2,2‐di­car­box­ylate, C₃₁H₂₅NO₄S, were obtained from dipolar [2+3]‐cyclo­additions of an azo­methine yl­ide with adamantane­thione and thio­fluorenone, respectively. The structures show that the choice of thio­ketone affects the regioselectivity of the cyclo­addition. The asymmetric unit of the former structure contains two mol­ecules of the thia­zolidine derivative plus a site for a partial occupancy (55%) methanol mol­ecule. O—H⋯O and C—H⋯O interactions link two of each of these entities into closed centrosymmetric hexamers. The five‐membered ring in each structure has an envelope conformation.     

Stereochemical Course of the Reaction between Thiocarbonyl Compounds and Oxiranes: Reaction with cis‐ and trans‐2,3‐Dimethyloxirane

The reactions of thiocarbonyl compounds with cis‐2,3‐dimethyloxirane ( 1a ) in CH₂Cl₂ in the presence of BF₃⋅Et₂O or SnCl₄ led to trans‐4,5‐dimethyl‐1,3‐oxathiolanes, whereas with trans‐2,3‐dimethyloxirane ( 1b ) cis‐4,5‐dimethyl‐1,3‐oxathiolanes were formed. With the stronger Lewis acid SnCl₄, the formation of side‐products was also observed. In the case of 1,3‐thiazole‐5(4H)‐thione 2 , these side‐products are the corresponding 1,3‐thiazol‐5(4H)‐one 5 and the 1 : 2 adduct 8 (Schemes 2 – 4). Their formation can be rationalized by the decomposition of the initially formed spirocyclic 1,3‐oxathiolane and by a second addition onto the C=N bond of the 1 : 1 adduct, respectively. The secondary epimerization by inversion of the configuration of the spiro‐C‐atom (Schemes 5 – 7) can be explained by a Lewis‐acid‐catalyzed ring opening of the 1,3‐oxathiolane ring and subsequent ring closure to the thermodynamically more stable isomer (Scheme 12). In the case of 2,2,4,4‐tetramethyl‐3‐thioxocyclobutanone ( 20 ), apart from the expected spirocyclic 1,3‐oxathiolanes 21 and 23 , dispirocyclic 1 : 2 adducts were formed by a secondary addition onto the C=O group of the four‐membered ring (Schemes 9 and 10).     

Copolymers containing a spiro orthoester moiety that undergo no shrinkage during cationic crosslinking

A spiro orthoester with an exomethylene group (exoSOE) was radically copolymerized with acrylonitrile or vinyl acetate at several feed ratios to obtain the corresponding copolymers having spiro orthoester moieties in the side chain. The obtained copolymers could be crosslinked via the double ring‐opening polymerization of the spiro orthoester moieties in their side chain by a treatment with BF₃OEt₂. The volume changes upon the crosslinking of the copolymers were evaluated by density measurements with a micromeritics gas pycnometer. The copolymers experienced less than 1% volume expansion instead of volume shrinkage during typical cationic crosslinking, regardless of the copolymer compositions. Negligible shrinkage was observed during the thermal cationic crosslinking of a film cast from a nitrobenzene solution of the copolymers containing a benzylthiophenium salt as a thermally latent cationic initiator. The constantly low volume changes during the crosslinking of the copolymers from exoSOE probably depended on the almost zero volume change during the cationic polymerizations of spiro orthoester derivatives. This indicates that exoSOE is an effective monomer for crosslinkable polymers without volume changes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3666–3673, 2006     

2,2′‐Spiro­bi(1,3‐benzodi­thiole)

The X‐ray structure analysis of 2,2′‐spiro­bi(1,3‐benzodi­thiole), C₁₃H₈S₄, has been performed. The mol­ecule has crystallographic twofold rotation symmetry, the axis passing through the spiro‐C atom. The four S atoms are arranged around the spiro‐C atom in two almost orthogonal CS₂ planes. However, because of large bending of the two five‐membered rings, close contact is present between two connected C atoms on the benzo group of each 1,3‐benzodi­thiole ring and one S atom on the other 1,3‐benzodi­thiole ring.     

Spiro[4H‐pyran‐3,3′‐oxindoles] Derived from 1,2,3,4‐tetrahydroquinoline—Part 2

Reaction of 5,6‐dihydro‐4H‐pyrrolo[3,2,1‐ij ]quinoline‐1,2‐dione ( 3 ) with two equivalents of cyclic 1,3‐dicarbonyl compounds under acid catalysis generates spiro[4H‐pyran‐3,3′‐oxindoles] 7 . In contrast, though base catalysis also achieves double addition, the final products 8 result from subsequent ring opening of the five‐membered lactam via intramolecular attack by enolate; these products can be converted into the spiro[4H‐pyran‐3,3′‐oxindoles] by treatment with acid.     

Synthesis and characterizations of the four‐armed amphiphilic block copolymer S[poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate)]4

The polymers poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate] (PDMDMA) and four‐armed PDMDMA with well‐defined structures were prepared by the polymerization of (2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate (DMDMA) in the presence of an atom transfer radical polymerization (ATRP) initiator system. The successive hydrolyses of the polymers obtained produced the corresponding water‐soluble polymers poly(2,3‐dihydroxypropyl acrylate) (PDHPA) and four‐armed PDHPA. The controllable features for the ATRP of DMDMA were studied with kinetic measurements, gel permeation chromatography (GPC), and NMR data. With the macroinitiators PDMDMA–Br and four‐armed PDMDMA–Br in combination with CuBr and 2,2′‐bipyridine, the block polymerizations of methyl acrylate (MA) with PDMDMA were carried out to afford the AB diblock copolymer PDMDMA‐b‐MA and the four‐armed block copolymer S{poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate]‐block‐poly(methyl acrylate)}₄, respectively. The block copolymers were hydrolyzed in an acidic aqueous solution, and the amphiphilic diblock and four‐armed block copolymers poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate) were prepared successfully. The structures of these block copolymers were verified with NMR and GPC measurements. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3062–3072, 2001     

Synthesis and properties of the polythiourethanes obtained by the cationic ring‐opening polymerization of cyclic thiourethanes

The cationic ring‐opening polymerization of a five‐membered thiourethane [3‐benzyl‐1,3‐oxazolidine‐2‐thione (BOT)] with boron trifluoride etherate afforded the corresponding polythiourethane with a narrow molecular weight distribution in an excellent yield. The molecular weight of the polymers could be controlled by the feed ratio of the monomer to the initiator. A kinetic study of the polymerization revealed that the polymerization rate of BOT (1.3 × 10^?2 L mol^?1 min^?1) was two times larger than that of the six‐membered thiourethane [3‐benzyltetrahydro‐1,3‐oxazolidine‐2‐thione (BTOT); 6.8 × 10^?3 L mol^?1 min^?1], and the monomer conversion obeyed the first‐order kinetic equation. These observations, along with the successful results in the two‐stage polymerization, supported the idea that this polymerization proceeded in a controlled manner. Block copolymerizations of BOT with BTOT were also carried out to afford the corresponding di‐ and triblock copolymers with narrow molecular weight distributions. The order of the 5% weight loss temperatures was as follows: poly(3‐benzyltetrahydro‐1,3‐oxazolidine‐2‐thione) [poly(BTOT)] > poly(BTOT₅₄‐b‐BOT₄₆) > poly(3‐benzyl‐1,3‐oxazolidine‐2‐thione) [poly(BOT)]. This indicated that an increase in the BTOT unit content raised the decomposition temperature. The order of the refractive indices was poly(BOT) > poly(BTOT₅₄‐b‐BOT₄₆) > poly(BTOT₅₄‐b‐BOT₄₆‐b‐BTOT₅₀) > poly(BTOT); this was in accord with the order of the sulfur content in the polymer chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4795–4803, 2006     

Sequence‐controlled cationic ring‐opening copolymerization of spiroorthocarbonate and oxetane

Pseudo block and triblock copolymers were synthesized by the cationic ring‐opening copolymerization of 1,5,7,11‐tetraoxaspiro[5.5]undecane (SOC1) with trimethylene oxide (OX) via one‐shot and two‐shot procedures, respectively. When SOC1 and OX were copolymerized cationically with boron trifluoride etherate (BF₃OEt₂) as an initiator in CH₂Cl₂ at 25 °C, OX was consumed faster than SOC1. SOC1 was polymerized from the OX‐rich gradient copolymer produced in the initial stage of the copolymerization to afford the corresponding pseudo block copolymer, poly [(OX‐grad‐SOC1)‐b‐SOC1]. We also succeeded in the synthesis of a pseudo triblock copolymer by the addition of OX during the course of the polymerization of SOC1 before its complete consumption, which provided the corresponding pseudo triblock copolymer, poly[SOC1‐b‐(OX‐grad‐SOC1)‐b‐SOC1]. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3233–3241, 2006     

New class of cationic ring‐opening polymerizations of 2,2‐diphenyl‐1,3‐oxathiolanes accompanying quantitative elimination of benzophenone

Cationic polymerizations of three 2‐substituted 1,3‐oxathiolanes, 2,2‐diphenyl‐1,3‐oxathiolane ( 1a ), 5‐methyl‐2,2‐diphenyl‐1,3‐oxathiolane ( 1b ), and 4‐methyl‐2,2‐diphenyl‐1,3‐oxathiolane ( 1c ), were carried out with boron trifluoride etherate (BF₃ · OEt₂) in dichloromethane at 30 °C to obtain poly(alkylene sulfide)s accompanying the elimination of benzophenone. In the cationic polymerization of 1b and 1c , the consumption of the monomers and formation of benzophenone proceeded simultaneously. The obtained poly(propylene sulfide)s from 1b and 1c contain 41% head–head units, which is in good agreement with that of the polymer from methylthiirane with BF₃ · OEt₂. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2943–2949, 2004     

Radical ring‐opening polymerization

The radical ring‐opening polymerization (RROP) behavior of the following monomers is reviewed, and the possibility for application to functional materials is described: cyclic disulfide, bicyclobutane, vinylcyclopropane, vinylcyclobutane, vinyloxirane, vinylthiirane, 4‐methylene‐1,3‐dioxolane, cyclic ketene acetal, cyclic arylsulfide, cyclic α‐oxyacrylate, benzocyclobutene, o‐xylylene dimer, exo‐methylene‐substituted spiro orthocarbonate, exo‐methylene‐substituted spiro orthoester, and vinylcyclopropanone cyclic acetal. RROP is a promising candidate for producing a wide variety of environmentally friendly functional polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 265–276, 2001     

Cationic ring‐opening polymerization of novel 1,3‐dehydroadamantanes with various alkyl substituents: Synthesis of thermally stable poly(1,3‐adamantane)s

Cationic ring‐opening polymerizations of 5‐alkyl‐ or 5,7‐dialkyl‐1,3‐dehydroadamantanes, such as 5‐hexyl‐ ( 4 ), 5‐octyl‐ ( 5 ), 5‐butyl‐7‐isobutyl‐ ( 6 ), 5‐ethyl‐7‐hexyl‐ ( 7 ), and 5‐butyl‐7‐hexyl‐1,3‐dehydroadamantane ( 8 ), were carried out with super Brønsted acids, such as trifluoromethanesulfonic acid or trifluoromethanesulfonimide in CH₂Cl₂ or n‐heptane. The ring‐opening polymerizations of inverted carbon–carbon bonds in 4–8 proceeded to afford corresponding poly(1,3‐adamantane)s in good to quantitative yields. Poly( 4–8 )s possessing alkyl substituents were soluble in 1,2‐dichlorobenzene, although a nonsubstituted poly(1,3‐adamantane) was not soluble in any organic solvent. In particular, poly( 8 ) exhibited the highest molecular weight at around 7500 g mol^?1 and showed excellent solubility in common organic solvents, such as THF, CHCl₃, benzene, and hexane. The resulting poly( 4–8 )s containing adamantane‐1,3‐diyl linkages showed good thermal stability, and 10% weight loss temperatures (T₁₀) were observed over 400 °C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4111–4124     

Synthesis of well‐defined polymers end‐functionalized with crosslinkable aziridine groups by living anionic polymerization

Well‐defined end‐functionalized polystyrene, poly(α‐methylstyrene), and polyisoprene with polymerizable aziridine groups were synthesized by the termination reactions of the anionic living polymers of styrene, α‐methylstyrene, and isoprene with 1‐[2‐(4‐chlorobutoxy)ethyl]aziridine in tetrahydrofuran at ?78 °C. The resulting polymers possessed the predicted molecular weights and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.1) as well as aziridine terminal moieties. The cationic ring‐opening polymerization of the ω‐monofunctionalized polystyrene having an aziridinyl group with Et₃OBF₄ gave the polymacromonomer, whereas the α,ω‐difunctional polystyrene underwent crosslinking reactions to afford an insoluble gel. Crosslinking products were similarly obtained by the reaction of the α,ω‐diaziridinyl polystyrene with poly(acrylic acid)‐co‐poly(butyl acrylate). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4126–4135, 2005     

Two conformers of 10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene spiro‐linked with homobenzoquinone epoxide

The crystal structures of the two thermally equilibrated conformational isomers of the epoxide 1′,5′‐dimethyl­spiro[10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene‐5,8′‐4′‐oxatricyclo[5.1.0.0^3,5]octane]‐2′,6′‐dione, C₂₃H₂₀O₃, have been determined by X‐ray diffraction. In the tricyclic dione skeleton, the oxirane and cyclo­propane rings adopt an anti structure with respect to the conjunct quinone frame. The spiro‐linked 10,11‐dihydro‐5H‐dibenzo[a,d]cyclo­heptene ring of the major isomer has a fairly twisted boat form, folding opposite to the adjoining cyclo­propane methyl substituent, whereas the seven‐membered ring of the minor isomer has an almost ideal twist–boat form, inversely folding to the side of the relevant methyl group. The conformational structures of these isomers have been compared with those of the corresponding isomers of the unepoxidized homobenzoquinone.     

Unusual cationic copolymerization behavior of a six‐membered ring spiro‐orthocarbonate bearing adamantane backbones with a monofunctional epoxide

Copolymerizations of a six‐membered ring spiro‐orthocarbonate bearing adamantane backbones ( AD ‐ SOC , 1 ) and a monofunctional epoxide, PGE , in the presence of cationic initiators such as Sc(OTf)₃ were carried out under various reaction conditions. As a result, instead of the anticipated poly(ether‐ether‐carbonate) 11 , two types of copolyethers ( 12 and 18 ) consisting of two or three types of ether components having different substituent groups were unusually formed along with the evolution of carbon dioxide gas, in which AD ‐ SOC efficiently acted as the corresponding oxetane equivalent monomers 3 and 4 . Furthermore, the copolymerization behavior, including the formation of copolyethers 12 and 18 , unexpectedly and significantly depended on the reaction conditions, such as the concentration of the initiator. For example, the copolymerizations with 5 mol % of Sc(OTf)₃ mainly afforded copolyether 18 , while those with 1 mol % mainly gave copolyether 12 . In addition, treatments with 5 mol % of Sc(OTf)₃ also yielded CH₂Cl₂, THF, and DMF‐insoluble networked products, indicating relatively higher thermal stability compared with a common polyether. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1729–1740, 2005