Microscale Synthetic Schlieren

We develop the axisymmetric Synthetic Schlieren technique to study the wake of a microscale sphere settling through a density stratification. A video-microscope was used to magnify and image apparent displacements of a micron-sized random-dot pattern. Due to the nature of the wake, density gradient perturbations in the horizontal greatly exceed those in the vertical, requiring modification of previously developed axisymmetric techniques. We present results for 780 and 383 μm spheres, and describe the limiting role of noise in the system for a 157 μm sphere. This technique can be instrumental in understanding a range of ecological and environmental oceanic processes on the microscale.

---

Reduction of primary freeze-drying time by electric field induced ice nucleus formation

The potential of a high electric field was utilized to induce ice nucleus formation in aqueous solutions. Using this technique it was possible to reduce the primary drying time during lyophilization. Samples of 10% (w/v) hydroxyethylstarch (HES) solution were frozen at a constant rate of −1 K/min, while nucleation was initiated at temperatures of −1.5, −4.5 and −8.5°C. In contrast, spontaneous nucleation was observed in a range between −11.5 and −17.1°C. Electrically induced nucleus formation has proved to be a reliable method to start crystallization at a desired temperature. Continuous measurement of the weight allowed to determine the drying rate and to detect at which time primary drying was completed. The drying time and the drying rate were found to be strongly dependent on the nucleation temperature during freezing. A relation between the nucleation temperature, the structure of the frozen samples and the drying times could be established.

---

Density stratified environments: the double-tank method

We present an alternative method of producing density stratifications in the laboratory based on the ‘double-tank’ method proposed by Oster (Sci Am 213:70–76, 1965). We refer to Oster’s method as the ‘forced-drain’ approach, as the volume flow rates between connecting tanks are controlled by mechanical pumps. We first determine the range of density profiles that may be established with the forced-drain approach other than the linear stratification predicted by Oster. The dimensionless density stratification is expressed analytically as a function of three ratios: the volume flow rate ratio n, the ratio of the initial liquid volumes λ and the ratio of the initial densities ψ. We then propose a method which does not require pumps to control the volume flow rates but instead allows the connecting tanks to drain freely under gravity. This is referred to as the ‘free-drain’ approach. We derive an expression for the density stratification produced and compare our predictions with saline stratifications established in the laboratory using the ‘free-drain’ extension of Oster’s method. To assist in the practical application of our results we plot the region of parameter space that yield concave/convex or linear density profiles for both forced-drain and free-drain approaches. The free-drain approach allows the experimentalist to produce a broad range of density profiles by varying the initial liquid depths, cross-sectional and drain opening areas of the tanks. One advantage over the original Oster approach is that density profiles with an inflexion point can now be established.

---

Two- and three-dimensional flows in nearly rectangular cavities driven by collinear motion of two facing walls

Two- and three-dimensional flows in nearly cuboidal cavities are investigated experimentally. A tight cavity is formed in the gap between two long and parallel cylinders of large radii by adding rigid top, bottom, and end walls. The cross-section perpendicular to the axes of the cylinders is nearly rectangular with aspect ratio Γ. The axial aspect ratio Λ > 10 is large to suppress end-wall effects. The fluid motion is driven by independent and steady rotation of the cylinders about their axes which defines two Reynolds numbers Re _1,2. Stability boundaries of the nearly two-dimensional steady flow have been determined as functions of Re _1,2 for Γ = 0.76 and Γ = 1. Up to six different three-dimensional supercritical modes have been identified. The critical thresholds for the onset of most of the three-dimensional modes, three of which have been observed for the first time, agree well with corresponding linear-stability calculations. Particular attention is paid to the flow for Γ = 1 under symmetric and parallel wall motion. In that case the basic flow consists of two mirror symmetric counter-rotating parallel vortices. They become modulated in span-wise direction as the driving increases. Detailed LDV measurements of the supercritical three-dimensional velocity field and the bifurcation show an excellent agreement with numerical simulations.

---

Turbulence measurements in a swirling pipe flow

This paper reports laser-Doppler measurements of the mean flow and turbulence stresses in a swirling pipe flow. Experiments were carried out under well-controlled laboratory conditions in a refractive index-matched pipe flow facility. The results show pronounced asymmetry in mean and fluctuating quantities during the downstream decay of the swirl. Experimental data reveal that the swirl significantly modifies the anisotropy of turbulence and that it can induce explosive growth of the turbulent kinetic energy during its decay. Anisotropy invariant mapping of the turbulent stresses shows that the additional flow deformation imposed by initially strong swirling motion forces turbulence in the core region to tend towards the isotropic two-component state. When turbulence reaches this limiting state it induces rapid production of turbulent kinetic energy during the swirl decay.

---

Fluid dynamics analysis of channel flow geometries for materials characterization in microfluidic devices

The fluid dynamics of geometries for liquid state materials characterization in microfluidic devices are investigated. Numerical simulation together with flow classification criteria are used to explore combinations of geometry and boundary conditions for which the flow type can be adjusted between simple shear and extension, while providing adequate flow strength and a stable environment for material observation. Two classes of flow geometries are identified. Both make use of opposing, laterally offset fluid streams that produce a stagnation point in the center of the geometry. In the first class, the flow type is manipulated by changing parameters inherent to the base geometry. This first case serves as a basis for identifying a second class in which the flow type is manipulated by changing the pressure boundary conditions, while keeping the geometry constant.Electronic Supplementary Material is available for this article if you access the article at .

Transient analysis of sub-critical evaporation of fuel droplet in non-isothermal stagnant gaseous mixtures: effects of radiation and thermal expansion

Transient sub-critical droplet evaporation in non-isothermal stagnant gaseous mixtures taking into account the effects of radiation, liquid volumetric expansion and droplet heating is investigated numerically. We obtained equations for Stefan velocity and the rate of change of the droplet radius taking into account liquid volumetric expansion, and derived the boundary conditions taking into account the effect of liquid thermal expansion. It is shown that in the case of sub-critical evaporation neglecting the liquid volumetric expansion causes underestimation of the evaporation rate at the initial stage and overestimation of the evaporation rate at the final stage of droplet evaporation.

An application of Gappy POD

An iterative procedure, based on the proper orthogonal decomposition (POD), first proposed by Everson and Sirovich (J Opt Soc Am A 12(8):1657–1664, 1995) is applied to marred particle image velocimetry (PIV) data of shallow rectangular cavity flow at Mach 0.19, 0.28, 0.38, and 0.55. The procedure estimates the POD modes while simultaneously estimating the missing vectors in the PIV data. The results demonstrate that the absolute difference between the repaired vectors and the original PIV data approaches the experimental uncertainty as the number of included POD modes is increased. The estimation of the dominant POD modes is also shown to converge by examining the subspace spanned by the POD eigenfunctions.

---

A pragmatic approach for deriving constitutive equations endowed with pom–pom attributes

The most important rheological and mathematical features of the pom–pom model are presently used to compare and improve other constitutive models such as the Giesekus and Phan-Thien–Tanner models. A pragmatic methodology is selected that allows derivation of simple constitutive equations, which are suited to possible software implementation. Alterations to the double convected pom–pom, Phan-Thien–Tanner and Giesekus models are proposed and assessed in rheometric flows by comparing model predictions to experimental data.

A model of a subcritical Joule–Thomson cryocooler with condensation inside the recuperator

To develop a tool for predicting of heat and mass transfer in Joule–Thomson cryocoolers working at subcritical pressures, we study a counter flow heat exchanger with condensation by employing the integral method. The effects of inlet pressure and working fluid are predicted. We also show that there is an optimal value of the enthalpy difference along the heat exchanger for which its length is minimal.

---

Variational optical flow estimation for particle image velocimetry

We introduce a novel class of algorithms for evaluating PIV image pairs. The mathematical basis is a continuous variational formulation for globally estimating the optical flow vector fields over the whole image. This class of approaches has been known in the field of image processing and computer vision for more than two decades but apparently has not been applied to PIV image pairs so far. We pay particular attention to a multi-scale representation of the image data so as to cope with the quite specific signal structure of particle image pairs. The experimental evaluation shows that a prototypical variational approach competes in noisy real-world scenarios with three alternative approaches especially designed for PIV-sequence evaluation. We outline the potential of the variational method for further developments.The publications of the CVGPR Group are listed under .

---

Quantitative planar Raman imaging through a spectrograph: visualisation of a supersonic wedge flow

Planar Raman imaging through a spectrograph is demonstrated as a diagnostic tool for quantitative flow visualisation of internal supersonic wedge flow. A dedicated Bayesian deconvolution filter is used to remove the spectral structure that is introduced by the spectrograph. The 2D density field is determined with ca. 10% precision using average images over 6,000 laser pulses, down to 0.5 mm from the surface of the wedge. Direct interpretations of Raman intensities provide more precise density data than indirect interpretations based on shock geometry in 2D inviscid flow.

---

A new interpretation for the dynamic behaviour of complex fluids at the sol–gel transition using the fractional calculus

We propose to analyse power law shear stress relaxation modulus observed at the sol–gel transition (SGT) in many gelling systems in terms of fractional calculus. We show that the critical gel (gel at SGT) can be associated to a single fractional element and the gel in the post-SGT state to a fractional Kelvin–Voigt model. In this case, it is possible to give a physical interpretation to the fractional derivative order. It is associated to the power law exponent of the shear modulus related to the fractal dimension of the critical gel. A preliminary experimental application to silica alkoxide-based systems is given.

A random synthetic jet array driven turbulence tank

We measure the flow above an array of randomly driven, upward-facing synthetic jets used to generate turbulence beneath a free surface. Compared to grid stirred tanks (GSTs), this system offers smaller mean flows at equivalent turbulent Reynolds numbers with fewer moving parts.

---

Influence of longitudinal conduction in the matrix on effectiveness of rotary heat regenerator used in air-conditioning

The paper presents an efficient analytical method of solving the problem of a rotary heat regenerator taking into account longitudinal heat conduction in the matrix. The small parameter method, Laplace transform as well as one of the spline functions have been applied for approximation of an initial condition in the reversion time. In the application part, the solution for a model in analysis of an influence of longitudinal conduction in the matrix on effectiveness of rotary heat regenerator in a wide range of dimensionless parameters as well as for the particular matrix applied in air-conditioning was used.

---

Aging of an unstable w/o gel emulsion with a nonionic surfactant

We study an unstable highly concentrated emulsion of water droplets in oil with a nonionic surfactant. A technique of light diffusion coupled to a rheometer allows simultaneous measurement of average droplet radius and emulsion shear elastic modulus during time. Over the studied range of volume fraction (from 71 to 95%), we show that Princen and Kiss’ (J Colloid Interface Sci 112:427–437, 1986) model does not apply. A dimensional analysis based on the hypothesis of dominant van der Waals forces is proposed for nonionic surfactants, which is in good agreement with experimental data. We also show that the measured average droplet volume increases linearly with time and that the coalescence rate strongly depends on the volume fraction in relation with different topological conformations of droplets.

Comment on the Clauser chart method for determining the friction velocity

A known difficulty with using the Clauser chart method to determine the friction velocity in wall bounded flows is that it assumes, a priori, a logarithmic law for the mean velocity profile. Using both experimental and DNS data in the literature, this note explicitly shows how friction velocities obtained using the Clauser chart method can potentially mask subtle Reynolds-number-dependent behavior.

---

Recent experimental probes of shear banding

Recent experimental techniques used to investigate shear banding are reviewed. After recalling the rheological signature of shear-banded flows, we summarize the various tools for measuring locally the microstructure and the velocity field under shear. Local velocity measurements using dynamic light scattering and ultrasound are emphasized. A few results are extracted from current works to illustrate open questions and directions for future research.

Structure and dynamics of a bidimensional pattern of liquid columns

We report an experimental study of the structure and dynamics of a bidimensional array of liquid columns. This pattern is formed below a flat porous plate continuously supplied with liquid. It exhibits a marked hexagonal tendency. Its typical wavelength is close to that of the most dangerous mode of the Rayleigh–Taylor instability of a thin viscous layer hanging below a plate, defined by the competition between gravity and surface tension. Collective dynamical behaviors are also evidenced, involving oscillations of the column positions, columns migrations, coalescences and nucleations. Quantitative comparisons are presented with the equivalent one-dimensional pattern formed below the perimeter of an overflowing dish (circular fountain experiment).

---