共查询到20条相似文献,搜索用时 453 毫秒
1.
用电子冷却存储环(CSR)提供的能量为165 MeV/u的高能C6+脉冲束分别与Ti、V、Fe、Ni和Zn靶表面相互作用,测量了各靶辐射的K壳层X射线。结果表明,实验探测到各靶的K和K X射线均向高能区发生了不同程度的移动。经分析,X射线发生频移是由靶原子外壳层发生多电离引起的。通过计算各靶K壳层X射线的产生截面,发现该截面随原子序数的增加而减小。将各靶K-X射线产生截面的实验值分别与两体碰撞近似、平面波恩近似和ECPSSR理论值比较,发现现有理论与实验值存在偏差,要准确描述实验结果需要进一步修正。 相似文献
2.
3.
研制了一台五通道ROSS-FILTER-PIN软X射线能谱仪,能谱范围为0.28—1.56keV.它由5个连续能段组成,每个能段的起止边由罗斯滤片对(ROSS-FILTERS)的L或K吸收边确定.罗斯滤片对的厚度通过优化计算得到,为了使每个通道的灵敏区外响应(即所测能段外响应)与通道总响应之比最小,在滤片对的第二滤片上镀上了一定厚度的第一滤片材料;为了缩减滤片表面积以增强低能滤片的抗冲击能力及方便滤片加工,能谱仪采用了小探测面积的PIN探测器(1mm2).借助此能谱仪,测量得到了喷气式Z箍缩(Z-pinch)等离子体辐射软X射线能谱的分布,并研究了软X射线产额随箍缩状况的变化趋势.
关键词:
Z箍缩等离子体
罗斯滤片
软X射线能谱 相似文献
4.
5.
在神光Ⅱ高功率激光装置上,实验研究了激光斜辐照形成的激光等离子体辐射X射线光子的特性及真空喷射热等离子体流的方向。采用针孔X射线相机测量了钕玻璃激光(基频1.053 μm)辐照铝靶形成的激光铝等离子体辐射的X射线光子的空间分布,并针对正入射和入射激光斜辐照情况下测得的X射线光子量及特性进行了分析和比较。结果发现:入射激光斜辐照固体平面靶产生的向真空喷射热等离子体流的方向是垂直靶面(即法线方向);正入射和斜入射激光叠加驱动靶时,一定程度上能改善激光辐照的均匀性,但等离子体源辐射的X射线光子数并未发现显著地增加;当激光斜辐照与靶相互作用时,激光能量被等离子体吸收下降。 相似文献
6.
用于激光等离子体诊断的亚千X射线能谱仪 总被引:19,自引:7,他引:12
本文简介了由滤片-X射线二极管阵列组成的具有亚纳秒时间分辨的亚千X射线能谱仪。在0.1到1.5keV能区能量分辨约为200eV。着重介绍了谱仪的结构和应用,数据处理及误差。并就激光-金平面靶相互作用实验中,在激光强度约10^14w/cm^2条件下获得的部份数据进行了简化处理,给出了激光等离子体亚千X射线辐射能谱,由此推出等离子体辐射温度。 相似文献
7.
利用多孔结构原理,研制了厚度为100 m、孔隙率为70%的纳米多孔铜靶,密度比为固体铜的30%。实验在中国工程物理研究院星光Ⅲ激光装置飞秒激光束上进行,激光功率密度大于1.61018 W/cm2,脉宽为30 fs。利用16 bit单光子CCD获取了X射线能谱,测得铜K线光子产额为2.9108 photonsr-1s-1,转换效率为0.008 38%。与压制加工的平面Cu靶相比,多孔结构靶的X射线产额约为平面靶的1.8倍,表明纳米多孔结构能够有效增强飞秒激光能量吸收,提高超热电子和X射线转化效率。 相似文献
8.
9.
利用一维辐射流体力学程序MULTI数值模拟研究了功率为1014Wcm2、脉冲宽度为300ps、波长为0.44μm的强激光辐照平面Au靶时产生X射线的过程,给出了X射线转换效率和能谱分布.通过将靶物质划分为对所产生的X射线光学薄的转化区和光学厚的再发射区,得到了作为黑体辐射热源的最佳靶厚度,并给出了辐射加热靶所产生的等离子体的密度和温度的空间分布.
关键词:
辐射流体力学
激光等离子体
X射线转换
辐射热波 相似文献
10.
利用神光Ⅱ第九路2 ns长脉冲激光束作用厚钛固体靶,研究了产生的keV X射线源的辐射区域和总辐射功率的时间行为。结果表明:在长脉冲激光作用厚固体靶时,硬X射线线辐射功率的时间行为以及辐射体积的时间行为与激光脉冲波形一致;长脉冲时,等离子体2维膨胀效应非常显著,keV X射线线辐射的径向辐射区域在激光焦斑尺寸附近达到饱和,导致X射线线辐射功率出现饱和,且keV X射线线辐射的辐射体积正比于焦斑尺寸的3次方。从理论和实验角度研究了在同样入射激光能量下,辐射功率随激光焦斑尺寸的变化关系,发现keV X射线线辐射的饱和辐射功率正比于焦斑尺寸的5/3次方,理论结果与实验结果一致。并讨论了相同基频输出激光能量下,keV X射线辐射总功率随激光波长的变化关系,发现即使考虑了倍频效率的影响,短波长激光仍然有利于keV X射线的发射。 相似文献
11.
12.
G. L. Bochek V. K. Voloshin O. S. Deiev N. I. Maslov 《Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques》2013,7(2):339-346
The interaction between X-ray radiation and the material of secondary targets is simulated using GEANT4 for two methods of measurements of intense X-ray spectra. In the first case, characteristic X-ray radiation (CXR) from the secondary target to the back hemisphere is detected; in the second case, primary radiation passing through pairs of foils (a Ross filter) is registered. Using Ross filters and the CXR technique, the primary spectra of X-ray radiation are recovered. Two methods for recovery primary radiation spectra are compared. 相似文献
13.
The temporal characteristics of the X-ray emission from a laser irradiated Ai target in a 20 kV/cm electric field are measured with electronic detectors. Spatial and spectral distributions of the X-ray radiation are evaluated using a pinhole camera and filter technique. 相似文献
14.
激光腔靶辐射时间特性研究 总被引:2,自引:1,他引:1
介绍了激光加热腔靶辐射时间特性研究。实验采用滤长为1.053μm,能量为30-750J,脉宽为600-1100ps的高斯型激光脉冲,辐照柱型腔靶,用两台具有一定和时间分辨的亚千X射线能谱仪,分别观察激光入射口和X光输运口的辐射时间特性,实验结果给出了腔靶源区发射X光时间过程及其与发射口面积,形状,发射能区等的关系。 相似文献
15.
A two-pulse two-wave (Nd and CO2 lasers) scheme is proposed for irradiating a laser target, which ensures the highest factor of laser radiation conversion to the X-ray range (13.5 nm ± 1%). Analytic estimates are obtained for parameters of pulses and of the target made of Xe or Li. Numerical optimization is performed for X-ray emission from a spherical Xe target exposed to a CO2 laser pulse. The maximal factor of conversion of laser radiation to X rays is ~1%. Angular and spectral characteristics of X-ray radiation are obtained. The flux of fast Xe ions ejected from the target and damaging the Mo/Si coating of X-ray mirrors is estimated. 相似文献
16.
17.
Through the use of time and space integrated kiloelectronvolt (keV) spectroscopy, we investigate the thermal emission of plasma, which produces strong line emission from the titanium K shell (He-a at 4.7 keV and H-α at 4.9 keV), created by laser. In order to optimize the conversion efficiency enhancement on titanium foils, the experiment is conducted under a variety of laser-driven intensity conditions. The X-ray emission intensity at 4.7 keV is measured and compared with prediction. The experimental result demonstrates that the solid Ti target laser-produced plasma (LPP) source has X-ray emission at 4.7 keV, which are all generated from electronic transitions in Ti ions at pulse width of 2.1 ns or 30 ps, the crudely evaluated He-α X-ray intensity appears to slightly increase with laser intensity enhancement, and the pre- pulse effect increases the conversion efficiency of the He-α X-ray. In addition, a 90-μm-thick Ti foil as a filter is used to transmit He-α X-ray at near 4.7 keV, creating a quasi-monochromatic transmission and greatly reducing the lower- and higher-energy background. 相似文献
18.
在SILEX-1激光器上,利用光子计数型CCD测量了超短超强激光束与高纯度Mo相互作用而产生的发射谱。实验发现, 在超短超强激光脉冲作用下, Mo等离子体辐射Kα X射线, 这一过程伴随很强的热辐射和轫致辐射。Mo等离子体Kα X射线辐射强度、 热辐射和轫致辐射随激光功率密度增加而增强。Using a Single photon counting CCD, X ray emission spectra of high purity Mo irradiated by ultra short and ultra intense laser pulse was firstly detected. The experiment was carried out with the SILEX 1 laser facility. The experimental results show that, for Mo target, characteristic K shell emission (Kα) is observed in the 0.23—2.32 J energy range in addition to a broadband bremsstrahlung background, and the X ray radiation intensity, thermal radiation and bremsstrahlung increase with enhancementofthe laser power density. 相似文献
19.
20.
研究X射线二极管(XRD)时间特性.XRD 是构成软X射线能谱仪的主要部件,它用于激光等离子体发射软X射线谱测量.实验利用激光聚变研究中心的200TW激光器(激光能量~6J,脉冲宽度~30fs)打金箔靶产生的X射线发射谱,用滤片(Al)-XRD探测系统测量,探测信号由高频电缆(SUJ-50-10)传输和宽带示波器(TDS694C和TDS6604B)记录.实验数据进行了线性拟合和比对分析.
关键词:
X射线二极管
时间特性
软X射线能谱仪
数据处理 相似文献