Photophysical processes involved within the anisole-thioindoxyl dyad system

The photophysical properties and the nature of the photoinduced electron transfer (PET) reactions within a synthesized anisole (A)-thioindoxyl (T) dyad system (24MBTO) have been studied by electrochemical, steady-state, and time-resolved spectroscopic techniques. Computations on the dyad were performed both in gas phase as well as solvent environment by TD-DFT method with B3LYP density function. The geometry optimization calculation of 24MBTO was done by 6-311G(d,p) basis function set implemented in the Gaussian package. The theoretical values of singlet vertical excitation energies were found to correlate well with the experimentally observed ones. The electrochemical measurements indicate the possibility of occurrence of PET reactions within 24MBTO between the linked redox centers A and T. Both steady-state and time-resolved spectroscopic measurements on the novel synthesized 24MBTO dyad demonstrate the formations of the two types of isomeric species: Z- and E- forms, resulted from the charge separation reactions. From the detailed studies it reveals that the present thioaurone may behave as a versatile photoswitchable system. It has been hinted that the loss process (charge recombination) within 24MBTO could possibly be prevented by incorporating it within the hydrophobic cavity of beta-cyclodextrin (betaCD).     

Triplet states as non-radiative traps in multichromophoric entities: single molecule spectroscopy of an artificial and natural antenna system

Energy transfer in antenna systems, ordered arrays of chromophores, is one of the key steps in the photosynthetic process. The photophysical processes taking place in such multichromophoric systems, even at the single molecule level, are complicated and not yet fully understood. Instead of directly studying individual antenna systems, we have chosen to focus first on systems for which the amount of chromophores and the interactions among the chromophores can be varied in a systematic way. Dendrimers with a controlled number of chromophores at the rim fulfill those requirements perfectly. A detailed photophysical study of a second-generation dendrimer, containing eight peryleneimide chromophores at the rim, was performed 'J. Am. Chem. Soc., 122 (2000) 9278'. One of the most intriguing findings was the presence of collective on/off jumps in the fluorescence intensity traces of the dendrimers. This phenomenon can be explained by assuming a simultaneous presence of both a radiative trap (energetically lowest chromophoric site) and a non-radiative trap (triplet state of one chromophore) within one individual dendrimer. It was shown that an analogue scheme could explain the collective on/off jumps in the fluorescence intensity traces of the photosynthetic pigment B-phycoerythrin (B-PE) (Porphyridium cruentum). The different values of the triplet lifetime that could be recovered for a fluorescence intensity trace of B-PE were correlated with different intensity levels in the trace, suggesting different chromophores acting as a trap as function of time.     

Adiabatic passage in a three-state system with non-Markovian relaxation: the role of excited-state absorption and two-exciton processes

The influence of excited-state absorption (ESA) and two-exciton processes on a coherent population transfer with intense ultrashort chirped pulses in molecular systems in solution has been studied. A unified treatment of adiabatic rapid passage (ARP) in such systems has been developed using a three-state electronic system with relaxation treated as a diffusion on electronic potential energy surfaces. We have shown that ESA has a profound effect on coherent population transfer in large molecules that necessitates a more accurate interpretation of experimental data. A simple and physically clear model for ARP in molecules with three electronic states in solution has been developed by extending the Landau-Zener calculations putting in a third level to random crossing of levels. A method for quantum control of two-exciton states in molecular complexes has been proposed.     

On an IC electronic balance control system and its impact on the calibration

The contribution deals with an “1974 integrated circuit” version of an electronic damping and nulling system, adapted to a torsion balance which now is more than twenty years old. The discussion of calibration results reveal that masses of about 0.5 mg, in certain cases, can be intercompared with a relative precision of 3 × 10^?5, indicating that the balance sensibility is better than 2 × 10^?8 g. As the deflection sensitivity of the balance is 1.3 × 10^?4 deg/μg the position sensor on the balance can detect, over a few minutes, average displacements of about 4 × 10^?7 cm (i.e. ～ 40 Å).     

Cortisol and cortisone as test substances for the efficiency of an inlet system

The results of a recent report on the use of cortisol and cortisone as test substances for inlet systems have been contradicted. The ion appearing at [M - 60]+ in the spectrum of each ofthese compounds has been shown to arise initially from an electron-impact process rather than by pyrolysis and subsequent ionization of the molecular compound. Only at higher temperatures isa significant degree of pyrolysis observed.     

Study of the voltammetric behaviour of metam and its application to an amperometric flow system

The electrochemical behaviour of the pesticide metam (MT) at a glassy carbon working electrode (GCE) and at a hanging mercury drop electrode (HMDE) was investigated. Different voltammetric techniques, including cyclic voltammetry (CV) and square wave voltammetry (SWV), were used. An anodic peak (independent of pH) at +1.46 V vs AgCl/Ag was observed in MT aqueous solution using the GCE. SWV calibration curves were plotted under optimized conditions (pH 2.5 and frequency 50 Hz), which showed a linear response for 17–29 mg L⁻¹. Electrochemical reduction was also explored, using the HMDE. A well defined cathodic peak was recorded at −0.72 V vs AgCl/Ag, dependent on pH. After optimizing the operating conditions (pH 10.1, frequency 150 Hz, potential deposition −0.20 V for 10 s), calibration curves was measured in the concentration range 2.5×10⁻¹ to 1.0 mg L⁻¹ using SWV. The electrochemical behaviour of this compound facilitated the development of a flow injection analysis (FIA) system with amperometric detection for the quantification of MT in commercial formulations and spiked water samples. An assessment of the optimal FIA conditions indicated that the best analytical results were obtained at a potential of +1.30 V, an injection volume of 207 μL and an overall flow rate of 2.4 ml min⁻¹. Real samples were analysed via calibration curves over the concentration range 1.3×10⁻² to 1.3 mg L⁻¹. Recoveries from the real samples (spiked waters and commercial formulations) were between 97.4 and 105.5%. The precision of the proposed method was evaluated by assessing the relative standard deviation (RSD %) of ten consecutive determinations of one sample (1.0 mg L⁻¹), and the value obtained was 1.5%.     

A new case of induced helical chirality in a bichromophoric system: absolute configuration of transparent and flexible diols from the analysis of the electronic circular dichroism spectra of the corresponding di(1-naphthyl)ketals

Di(1-naphthyl)ketals of 1, n-diols show couplet effects allied to the (1)B naphthalene transition in their CD spectra. This means that they assume a conformation with a prevailing sense of twist of the naphthalene rings, imposed by the absolute configuration (AC) of the starting diols and by the nature of the R 1 groups. A positive couplet for aliphatic diols is a probe of ( R, R), AC while the opposite sign is found for ( R, R) aromatic diols.     

The 1/1 and 2/1 approximants in the Sc-Mg-Zn quasicrystal system: triacontahedral clusters as fundamental building blocks

Single-crystal structures are reported for Sc(3)Mg(0.18(1))Zn(17.73(3)), the 1/1 approximant crystal (AC), and Sc(11.18(9))Mg(2.5(1))Zn(73.6(2)), the 2/1 AC, in the corresponding icosahedral quasicrystal (i-QC) system. The 1/1 AC crystallizes in space group Im, a = 13.863(2) A, Z = 8, and the 2/1 AC, in Pa, a = 22.412 (2) A, Z = 8. The latter, which is valuable in pointing the way to the QC structure, is the best ordered and refined 2/1 example to date. The fundamental building blocks in both ACs are triacontahedral clusters centered by smaller multiply endohedral Tsai-type arrays; the former are condensed through body-centered-cubic packing in the 1/1 and primitive cubic packing in the 2/1 AC. Novel prolate rhombohedra centered by Sc-Sc dimers are also generated between triacontahedra in the 2/1 AC.     

Use of 9-methylfluorene as an indicator in the titration of common group IA and group IIA organometallic reagents

9-Methylfluorene was tested as an indicator in the titration of commonly used organometallic reagents. This indicator is readily prepared in three steps from fluorenone. In THF solution the deprotonated indicator is red and exhibits a sharp endpoint. The highly basic reagents sec-butyllithium and tert-butyllithium can be titrated in ether solution, where the color of the deprotonated indicator is yellow.     

The Validation of an LC-MS Method for the Determination of Risperidone and its Active Metabolite 9-Hydroxyrisperidone in Human Plasma

A simple, specific and sensitive high performance liquid chromatography-mass spectrometry (LC-MS) method for the determination of risperidone and its active metabolite 9-hydroxyrisperidone in human plasma has been developed and validated. The analytes were prepared through a single-step liquid-liquid extraction (LLE) procedure with the solvent methyl tert-butyl ether and quantitated by MS detection in the positive mode using selected ion monitoring (SIM). Each analytical run was completed within 9 min. Results showed that the LC-MS method enabled to detection of both compounds down to 0.1 ng.mL^–1 (S/N > 3) and the linear range was 0.2–24 ng.mL^–1, with the correlation coefficients above 0.99. At the concentration of 0.2, 0.5, 10 and 20 ng.mL^–1, the inter-day and intra-day RSD were both below 15%. The method has been successfully used to support the routine therapeutic drug monitoring (TDM) and the pharmacokinetics study of risperidone.     

Spectrophotometric determination of thallium after its extraction as an ion-pair of the chloro-complex and pyronine G

A sensitive and selective procedure for the spectrophotometric determination of thallium is described. The method is based on the formation of an ion-pair between [TlCl(4)](-) and the pyronine G cation in chloride-containing acid media. The ion-pair is extracted into benzene and permits the determination of as low as 0.3 mug of thallium in a final volume of 25 ml at 530 nm. The system obeys Beer's law in the concentration range 1-14 mug of thallium in a final volume of 25 ml. Potassium iodate was found to be highly effective for the oxidation of Tl(I) to Tl(III) and the presence of excess oxidant does not interfere. The method can be used for the determination of thallium in high purity cadmium, cadmium sponge and rock samples.     

自动真空液相色谱装置的研制及其在五味子成分分离中的应用

为满足天然产物高效分离的需求,本文研制了自动真空液相色谱(AUTO-VLC)装置并用于五味子石油醚萃取物的分离。该装置由自主设计的流动相储备系统、10通分流切换阀、3通切换阀、3个不同规格的动态轴向压缩色谱柱、10通馏分收集阀和馏分收集器组成,采用可编程逻辑控制器(PLC)S7-200实现了分离过程的不同比例流动相切换、不同规格色谱柱选择、分离时间设定及馏分收集的自动控制及监测。应用于五味子成分分离的结果表明:采用150 mm直径动态轴向压缩色谱柱的VLC,从100 g五味子石油醚萃取物中一次分离得到6个组成明显不同的样品(S1~S6)。建立了通过多次薄层色谱(TLC)展开筛选VLC分离条件的方法,并进行了分离验证。VLC分离条件选择方法:自动真空液相色谱的初始洗脱剂的比例以首次TLC展开时全部目标化合物的比移值(R_f)介于0~0.45时展开剂的组成为宜;梯度洗脱比例变化以k值(展开次数(n)与R_f的线性函数斜率)和TLC分离度为依据选择;不同R_f范围内洗脱次数由n≈ ΔR_f/k计算。采用选择的条件从样品S5中分离得到了13个组分和4个纯度在85%以上的化合物,仅耗时17 h。AUTO-VLC的研制对于中药成分的自动和系统性分离具有重要价值。     

New 1:1 and 2:1 salts in the `dl‐norvaline–maleic acid' system as an example of assembling various crystal structures from similar supramolecular building blocks

Molecular salts and cocrystals of amino acids have potential applications as molecular materials with nonlinear optical, ferroelectric, piezoelectric, and other various target physical properties. The wide choice of amino acids and coformers makes it possible to design various crystal structures. The amino acid–maleic acid system provides a perfect example of a rich variety of crystal structures with different stoichiometries, symmetries and packing motifs built from the molecular building blocks, which are either exactly the same, or differ merely by protonation or as optical isomers. The present paper reports the crystal structures of two new salts of the dl ‐norvaline–maleic acid system with 1:1 and 2:1 stoichiometries, namely dl ‐norvalinium hydrogen maleate, C₅H₁₂NO₂⁺·C₄H₃O₄⁻, (I), and dl ‐norvalinium hydrogen maleate–dl ‐norvaline, C₅H₁₂NO₂⁺·C₄H₃O₄⁻·C₅H₁₁NO₂, (II). These are the first examples of molecular salts of dl ‐norvaline with an organic anion. The crystal structure of (I) has the same C ₂²(12) structure‐forming motif which is common for hydrogen maleates of amino acids. The structure of (II) has dimeric cations. Of special interest is that the single crystals of (I) which are originally formed on crystallization from aqueous solution transform into single crystals of (II) if stored in the mother liquor for several hours.     

Synthesis of a new (1R)-(-)-myrtenal-derived dioxadithiadodecacycle and its use as an efficient chiral auxiliary

[reaction: see text] The new macrocycle 9 (>70% yield from hydroxythiol 10) was treated with several nucleophilic reagents (RMgX, RLi, and LiAlH4) affording carbinols 12a-j (80-96% yield, >99:1 dr). Oxidative hydrolysis of 12a,c,e, followed by LiAlH4 reduction of the resulting mixture, gave 16a,c,e in >95% ee,16c being a key precursor for the preparation of fungicide 17. The absolute configuration of 9 and 12j (Nu = H) was established by single-crystal X-ray diffraction analyses and chemical correlation.     

Electrochemiluminescence resonance energy transfer between an emitter electrochemically generated by luminol as the donor and luminescent quantum dots as the acceptor and its biological application

Novel electrochemiluminescence resonance energy transfer (ECRET) between an emitter electrochemically generated by luminol as the donor and luminescent quantum dots as the acceptor is investigated. The ECRET technique can be used to study the interactions and conformational changes of proteins.     

A novel synthesis of 1-aryl tetrazoles promoted by employing the synergy of the combined use of DMSO and an ionic liquid as the solvent system at ambient temperature

The synergy of the combined use of DMSO and an ionic liquid viz. (bbim)⁺Br⁻ has brought about a mild, convenient, efficient, and rapid protocol for the synthesis of 1-substituted-1H-1,2,3,4-tetrazoles via the condensation of amines, triethyl orthoformate, and sodium azide at ambient temperature in excellent isolated yields (85-90%). The inherent Bronsted acidity of ionic liquid and high polarity of both IL and DMSO resulted in a significant enhancement in the reaction rate.     

Alternating copolymerization of ethylene and propene with the [ethylene(1-indenyl)(9-fluorenyl)]zirconium dichloridemethylaluminoxane catalyst system

The copolymerization of ethylene and propene was conducted at −40°C with the [ethylene(1-indenyl)(9-fluorenyl)]zirconium dichloride-methylaluminoxane catalyst system, and the microstructure of the resulting copolymers was analyzed in detail by ¹³C NMR. The content of alternating [EP] sequences increased markedly with an increase in the feed ratio of propene to ethylene. A poly(ethylene-co-propene) with a proportion of [EP] sequences over 95% was thus obtained under appropriate copolymerization conditions. It was also demonstrated that the alternating ethylene-propene copolymer is stereoregular and isotactic.     

Development of an automatic multi-channel ink-jet ejection chemiluminescence system and its application to the determination of horseradish peroxidase

In this work, an automatic multi-channel ink-jet for chemiluminescence (CL) analysis was developed. The four-channel ink-jet device was controlled by a home-made circuit. Differing from the classic flow injection CL, the whole procedure for CL analysis was automatically completed on a hydrophobic glass side. CL reaction of luminal and hydrogen peroxide for the determination of horseradish peroxidase (HRP) was selected as an application to automatic CL analysis platform. All solutions delivered by different channels were precisely ejected to the same position of the glass slide for the CL analysis. The consumption of reaction solution was reduced to nanoliter level. The whole CL analysis could be completed in less than 4 min, which was benefited from the prompt solution mixing in small size of droplet. The CL intensity increased linearly with HRP concentration in the range from 0.01 to 0.5 μg mL⁻¹. The limit of detection (LOD) (S/N = 3) was 0.005 μg mL⁻¹. Finally, the automatic CL system could also be used for the detection of HRP in HRP–protein conjugates, which showed its practical application in immunoassay.     

Adsorption of hydrogen on Pt(1 1 1) and Pt(1 0 0) surfaces and its role in the HOR

Hydrogen adsorption isotherms, evaluated by combination of cyclic voltammetry and chronoamperometry, are reported on Pt(1 1 1) and Pt(1 0 0) surfaces in 0.1 M HClO₄. We found that at E > 0.05 V Pt(1 1 1) and Pt(1 0 0) are only partially covered by the adsorbed hydrogen (H_ad). On both surfaces, a full monolayer of the adsorbed hydrogen is completed at −0.1 V, i.e. the adsorption of atomic hydrogen is observed in the hydrogen evolution potential region. We also found, that the activity of the hydrogen oxidation reaction is mirrored by the shape of the hydrogen adsorption isotherms, implying that H_ad is in fact a spectator in the HOR.