Synthesis of IONP's decorated graft copolymers and study of their magnetic force–induced wastewater treatment

Our work is focused on facile synthesis and modification of amylopectin‐grafted block copolymers by using reversible addition?fragmentation chain transfer (RAFT) polymerization technique. This technique yields polymers with controlled molecular weight and low polydispersity indexes and is feasible with a wide range of monomers. Five different grades of amylopectin‐grafted polymethacrylic acid and polyacrylamide block copolymers have been synthesized via RAFT, by varying the amount of acrylamide employing amylopectin‐based macro chain transfer agent. Graft copolymers have been upgraded as smart responsive graft copolymers, through the incorporation of iron oxide nanoparticles (IONPs) via condensation reaction. The polymeric materials have been extensively characterized by energy‐dispersive X‐ray analysis, Fourier transform infrared spectroscopy, proton magnetic resonance spectroscopy, scanning electron microscopy, ultraviolet‐visible spectroscopy, gel permeation chromatography, transmission electron microscopy, thermogravimetric analysis, and X‐ray diffraction analysis. Normal and responsive graft copolymers have been studied for removal of model contaminant (kaolin), and responsive graft copolymers have been used to remove methylene blue dye (without using any adsorbent) from water by applying external magnetic field. The upgraded block copolymers have shown best performance in wastewater treatment.     

BARRIER PROPERTIES OF VINYLIDENE CHLORIDE COPOLYMERS

The permeability coefficients of a series of copolymers of vinylidene chloride (VDC)with methyl acrylate (MA), butyl acrylate (BA) or vinyl chloride (VC) (as comonomer)to oxygen and carbon dioxide have been measured at 1.0 MPa and 30℃, while those towater vapor have been measured at 30℃ and 100% relative humidity All the copolymersare semicrystalline. VDC/MA copolymers have lower melting temperature compared withVDC/BA copolymers, while that melting temperature of VDC/VC copolymer is higherthan that of VDC/acrylate copolymers with the same VDC content. The barrier propertyof the copolymers is predominantly controlled by crystallite, free volume fraction, andcohesive energy The permeability coefficients of VDC/MA copolymers to oxygen, carbondioxide, and water vapor were successfully correlated with the ratio of free volume tocohesive energy.     

The preparation and properties of BAB block copolymers based on polyethylene sulphide and polyisoprene

Block copolymers of ethylene sulphide (B) and isoprene (A) have been prepared by anionic synthesis using alkali metal complexes of naphthalene as initiator. Two series of block copolymers have been synthesized, one (based on sodium naphthalenide as initiator) having high molecular weights and the other (based on lithium naphthalenide) having low molecular weights.Physical properties of the block copolymers as a function of composition, molecular weight and polyisoprene microstructure have been studied. Polymers containing high molecular weight polyethylene sulphide sequences were difficult to process without degradation. By lowering the molecular weight of the polyethylene sulphide segment, block copolymers of improved processibility were obtained.The centre block polyisoprene microstructure has been varied from 100% 1,2/3,4 configuration to 80% 1,4 configuration by preparing a “seed” polymer in tetrahydrofuran followed by solvent removal and replacement by hexane. Changes in microstructure affect low temperature flexibility, resilience and tensile strength of the block copolymer.The BAB block copolymers are biphasic and exhibit elastomeric properties with improved network stability compared with polystyrene-polybutadiene-polystyrene ABA block copolymers.     

苯乙烯—环氧乙烷嵌段共聚物的阴离子聚合与表征

用二苯甲烷钾为引发剂,阴离子聚合法合成了苯乙烯（Ｓｔ）－环氧乙烷（ＥＯ）嵌段共聚物,并用ＦＴＩＲ,＾１Ｈ－ＮＭＲ,ＳＥＣ,ＷＡＸＤ和动态粘弹谱对共聚物进行了表征。结果表明所得聚合物为分子量可控,窄分布的两嵌段共聚物。     

Modeling random methyl branching in ethylene/ propylene copolymers using metathesis chemistry: synthesis and thermal behavior

The structure of random ethylene/propylene (EP) copolymers has been modeled using step polymerization chemistry. Six ethylene/propylene model copolymers have been prepared via acyclic diene metathesis (ADMET) polymerization and characterized for primary and higher level structure using in-depth NMR, IR, DSC, WAXD, and GPC analysis. These copolymers possess 1.5, 7.1, 13.6, 25.0, 43.3, and 55.6 methyl branches per 1000 carbons. Examination of these macromolecules by IR and WAXD analysis has demonstrated the first hexagonal phase in EP copolymers containing high ethylene content (90%) without the influence of sample manipulation (temperature, pressure, or radiation). Thermal behavior studies have shown that the melting point and heat of fusion decrease as the branch content increases. Further, comparisons have been made between these random ADMET EP copolymers, random EP copolymers made by typical chain addition techniques, and precisely branched ADMET EP copolymers.     

Characterization of propylene-ethylene block copolymers using solid state 13C-NMR spectroscopy

Commercial block copolymers of propylene with ethylene (PEBC) are multiphase systems comprising block and random copolymers as well as small amounts of homopolymers. At present, no satisfactory method exists for characterizing the “blocky” structure of these copolymers. This article aims to fulfill this need. Accordingly, the block and random copolymers of propylene with ethylene have been investigated using ¹³C CP/MAS NMR with high-power dipolar decoupling. Comparisons have been made between the spectra of block and random copolymers and it is shown possible to distinguish between them by means of an additional signal, appearing at 32.5δ, in block copolymers (attributable to block junctions). © 1992 John Wiley & Sons, Inc.     

Synthesis of well-defined all-acrylic graft copolymers

Well defined all-acrylic graft copolymers have been synthesized using the macromonomer technique. Poly(methyl methacrylate) (PMMA) macromonomers of controlled molecular weight and narrow molecular weight distribution have been synthesized by group transfer polymerization (GTP) using a protected hydroxyl functional initiator. These macromonomers were quantitatively functionalized with a polymerizable acrylic and group and copolymerized under free radical conditions with 2-ethylhexyl acrylate (2EHA) to form the desired well defined graft copolymers in high yields. The macromonomers and the copolymers have been characterized by a variety of spectroscopic, chromatographic and thermal analysis methods. Transparent, multiphase materials with glass transition temperature (Tg) values of approximately -65 °C and 115 °C were obtained. The reaction conditions necessary to generate these materials most effectively have also been investigated and are described herein.     

Head-to-Head Polymers. XXII. Toward the Synthesis of Pure Head-to-Head Poly(methyl Methacrylate): Copolymerization of 2,3-Dimethylmaleic Anhydride and Ethylene

Copolymerization of 2,3-dimethylmaleic anhydride and ethylene has been accomplished under ethylene pressure (up to 1000 psi) with AIBN as the initiator. The copolymers were obtained at relatively low yield and only of moderate molecular weight. The incorporation of 2,3-dimethylmaleic anhydride units into the copolymer is about 20 mol% at 1000 psi and is 33 mol% at 500 psi of ethylene pressure. Unlike maleic anhydride-ethylene copolymers, alternating 2,3-dimethylmaleic qnhydride-ethylene copolymers of reasonable molecular weight have not yet been prepared. 2,3-Dimethylmaleic anhydride-ethylene copolymers could be hydrolyzed to the polymeric acids and quantitatively esterified to the polymeric methyl esters. Both anhydride and ester copolymers have been characterized spectroscopically and by their thermal behavior.     

Synthesis of guanidine‐containing copolymers and their applications in the sorption of transition metals

2,2‐Diallyl‐1,1,3,3‐tetraethylguanidinium chloride copolymers with N‐substituted maleimides have been prepared by free radical copolymerization. Specific surface area and porosity of the copolymers under investigation have been determined by using the low‐temperature adsorption method. Sorption capacity of the copolymers toward Re(VII), Mo(VI), Ni(II) and Cu(II) ions has been investigated. The influence of treatment time, temperature and pH on sorption of metal ions was studied. Copyright © 2016 John Wiley & Sons, Ltd.     

Side-chain liquid crystalline polysiloxanes containing a cyanohydrin chiral centre

A number of new ferroelectric side chain liquid crystal homopolymers derived from poly(hydromethylsiloxane), their copolymers with different mesogens and with poly(dimethylsiloxane) backbones have been prepared. The transition temperatures of the monomers, homo and copolymers have been determined. The homopolymers exhibit S*_C and N* phases, while copolymers show only a S*_C phase. A measured spontaneous polarization value of monomer, 9b, is larger than 500 nC cm^-2.     

Optically isotropic mesophase in comb-shaped copolymers with side mesogenic groups

Two series of comb-shaped copolymers poly(4-(4-cyanobiphenyl-4′-yloxy)butyl acrylate)-co-(4-(6-acryloyloxyhexyl-1-oxy)isophthalic acid)) and poly(4-(6-acryloyloxyhexyl-1-oxy)benzoic acid)-co-(acrylic acid)) have been prepared by free-radical copolymerization, and their phase diagrams have been constructed. Formation of the optically isotropic phase characterized by the absence of birefringence and high optical activity has been demonstrated for a number of copolymers. At the same time, the DSC curves of these compounds show a well-defined phase transition with the heat of melting equal to 2–5 J/g. Specific features of hydrogen bonding in the copolymers have been studied by IR spectroscopy. It has been speculated that there is correlation between microphase separation between hydrophobic and hydrophilic units in the copolymers and formation of the optically isotropic mesophase.     

Novel Polyurethane Multiblock Copolymers and Their Zwitterionomers Using a Polyurethane Macroiniferter

Abstract

Polyurethane-poly(4-vinylpyridine) multiblock copolymers have been prepared by the decomposition of a tetraphenylethane-based polyurethane macroiniferter in the presence of 4-vinylpyridine. The increase in the molecular weight and conversion with an increase in polymerization time proves the “living” radical mechanism. The polyurethane-poly(4-vinylpyridine) multiblock copolymers so obtained were converted into their zwitterionomers by treating with γ-propane sultone. Both block copolymers and their zwitterionomers have been characterized using spectral and thermal techniques.     

Novel fluoroalkyl end-capped amphiphilic diblock copolymers with pH/temperature response and self-assembly behavior

A series of fluoroalkyl end-capped diblock copolymers of poly[2-(N,N-dimethylamino)ethyl methacrylate] (PDMAEMA or PDMA) and poly[2-(N,N-diethylamino)ethyl methacrylate] (PDEAEMA or PDEA) have been synthesized via oxyanion-initiated polymerization, in which a potassium alcoholate of 4,4,5,5,6,6,7,7,7-nonafluoro-1-heptanol (NFHOK) was used as an initiator. The chemical structures of the NFHO-PDMA-b-PDEA and NFHO-PDEA-b-PDMA depended on the addition sequence of the two monomers and the feeding molar ratios of [DMA] to [DEA] during the polymerization process. These copolymers have been characterized by (1)H NMR and (19)F NMR spectroscopy and gel permeation chromatography (GPC). The aggregation behavior of these copolymers in aqueous solutions at different pH media was studied using a combination of surface tension, fluorescence probe, and transmission electron microscopy (TEM). Both diblock copolymers exhibited distinct pH/temperature-responsive properties. The critical aggregation concentrations (cacs) of these copolymers have been investigated, and the results showed that these copolymers possess excellent surface activity. Besides, these fluoroalkyl end-capped diblock copolymers showed pH-induced lower critical solution temperatures (LCSTs) in water. TEM analysis indicated that the NFHO-PDMA(30)-b-PDEA(10) diblock copolymers can self-assemble into the multicompartment micelles in aqueous solutions under basic conditions, in which the pH value is higher than the pKa values of both PDMA and PDEA homopolymers, while the NFHO-PDEA(10)-b-PDMA(30) diblock copolymers can form flowerlike micelles in basic aqueous solution.     

疏水缔合型增稠剂聚(丙烯酰胺-丙烯酸高级酯)的合成及增稠性能研究

采用沉淀聚合法合成了聚（丙烯酰胺－丙烯酸十四酯），聚（丙烯酰胺－丙烯酸十六酯）和聚（丙烯酰胺－丙烯酸十八酯），重点讨论了共聚物中疏水基团数量及疏水基团链长对增稠性能的影响。采用凯达尔定氮法和动态热分析（DMTA）测定了共聚物的组成及玻璃化温度。     

Sur la compatibilité des copolymères statistiques binaires et ternaires d'acrylonitrile,d'acétate de vinyle et d'α-méthylstyrène

A comparison has been made between (a) mixtures of the binary copolymers of acrylonitrile with vinyl acetate and with α-methyl styrene and (b) the ternary copolymer. The two products have been characterized for thermal and mechanical behaviour. For each pair of copolymers, a study has been made of compatibility in establishing the type of mixture and the variation of properties with composition.     

Copolymers of tetrafluoroethene with chlorotrifluoroethene and with bromotrifluoroethene

Tetrafluoroethene (TFE)–chlorotrifluoroethene (CTFE) and TFE–bromotrifluoroethene (BTFE) copolymers have been synthesized by solution copolymerization over the entire range of comonomer composition. Crystallinity data are reported and first- and second-order transitions have been investigated by DSC. Glass transition temperatures of TFE-CTFE copolymers vary in a nonlinear fashion in the range defined by the homopolymers conforming best to the Johnston equation; the behavior in the TFE-BTFE system is more linear. Whereas TFE-BTFE copolymers show a steep decrease of melting temperature at higher BTFE content, due to the amorphous character of the polymers, more regular behavior was found for TFE-CTFE copolymers. Enthalpies of fusion are also reported. The results are discussed in relation to copolymer composition and structure and are compared with data on tetrafluoroethene–hexafluoropropene (FEP) fluorocarbon resins.     

Optically active polymers containing side-chain photochromic moieties. Synthesis and chiroptical properties of copolymers of trans-N(4-azobenzene)-maleimide with (−)-menthyl vinyl ether and (+)(S)-2-methylbutyl vinyl ether

The copolymers of trans-N(4-azobenzene)-maleimide (ABM) with optically active alkyl vinyl ethers, such as (?)-menthyl vinyl ether (MtVE) and (+)S-2-methylbutyl vinyl ether (MBVE), have been prepared either by direct copolymerization or by functionalization with trans-4-amino-azobenzene of the corresponding alternating copolymers of maleic anhydride with MtVE and MBVE. The chiroptical properties of the above copolymers have been studied by CD measurements. The induced optical activity on the side-chain trans-azobenzene moieties is discussed in terms of different conformational rigidity of the macromolecules.     

Cone calorimetry studies of fire retardant soybean-oil-based copolymers containing silicon or boron: Comparison of additive and reactive approaches

The fire retardance and thermal stability of soybean-based copolymers reactively modified by copolymerization with trimethylsilylstyrene (SiST) and tris-(4-vinylphenylboroxine) (BST) have been compared with those prepared with equivalent amounts of the additive 1,3-diphenyl-1,1,3,3-tetramethyldisiloxane (SiAD) and tris-(phenylboroxine) (BAD) and with the heteroatom-free soybean-based copolymers. The best results are obtained for the boron-containing copolymers. The reactive or additive approach is a significant factor in terms of the level of fire retardance achieved.     

Dual stimuli-responsive dendritic-linear block copolymers

Dendritic-linear block copolymers that have pH responsive poly(benzyl ether) dendrons and temperature responsive PiPrOx chains have been designed by copper-mediated click reactions. These copolymers exhibit sharp thermal transitions with a wide range of pH-dependent thermal transition temperatures.     

Synthesis and characterization of graft copolymers containing poly(p-phenylene) main chains and mesogen-jacketed liquid-crystalline polystyrene side chains

A series of novel comblike mesogen-jacketed liquid-crystalline graft copolymers, poly(p-phenylene)-g-poly{2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene} (PPP-g-PMPCS) copolymers, have been designed and successfully synthesized by a Yamamoto coupling reaction and subsequent atom transfer radical polymerization (ATRP). ¹H NMR spectroscopy, ultraviolet–visible spectra, and gel permeation chromatography (GPC) have been used to confirm the molecular structure of the macroinitiator and the copolymers. A study of the polymerization kinetics of ATRP has shown that the molecular weight of the copolymer increases linearly with the conversion of the monomer, whereas the polydispersity remains narrow (≤1.28), indicating that the ATRP of 2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene is well controlled. Thermogravimetric analysis and differential scanning calorimetry (DSC) measurements have indicated that the PPP-g-PMPCS copolymers have better thermal stabilities than the macroinitiator, and their thermal stabilities increase with increasing molecular weight. The liquid-crystalline behavior has been examined with polarized optical microscopy, DSC, one-dimensional wide-angle X-ray diffraction (1D WAXD), and two-dimensional wide-angle X-ray diffraction (2D WAXD). The results show that all the comblike copolymers exhibit obvious liquid-crystalline behaviors, even though the GPC molecular weight of the segments of poly{2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene} (PMPCS) have been determined to be far less than the critical value of linear PMPCS. Moreover, 1D WAXD measurements show that the temperature at which the comblike mesogen-jacketed liquid-crystalline copolymers can transform into a liquid-crystalline phase is low; about 20 °C in comparison with the linear ones. 2D WAXD analysis has revealed that these comblike copolymers should be assigned to a hexatic columnar nematic (Φ_HN) phase. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2543–2555, 2007