Reflection of a Dam–Break Wave at a Vertical Wall. Numerical Modeling and Experiment

Results of the experimental study and numerical modeling of the reflection of a dam–break wave at the vertical end wall of a channel are given. A wave forms with distance from a partition creating the initial level difference of the liquid. It is shown that a numerical calculation based on the Zheleznyak—Pelinovskii nonlinear dispersion model satisfactorily describes the height of the splash–up, the amplitude of reflected waves, and the wave velocity in front of the wall for smooth and dam–break waves. It is also shown that, for smooth and weakly breaking (without significant entrainment of air) incoming waves, the experimental values of the height of the splash–up at the wall agree well with relevant experimental and calculated data for solitary waves.     

Reflection of a plane shock wave from a rigid concave wall

We present the results of an experimental study of the reflection of a plane stationary shock wave with Mach number in the range 1.21–1.35 from a rigid cylindrical concave wall. The experiments were carried out in a shock tube. In experimental shock tube technology the reflection of a shock wave from a rigid wall is often used for obtaining high temperatures [1]. This circumstance is associated with the fact that the temperature behind the reflected wave is significantly higher than that behind the incident wave.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 33–39, July–August, 1970.     

Regular reflection of a magnetohydrodynamic shock wave from a conducting wall

In two-dimensional supersonic gasdynamics, one of the classical steady-state problems, which include shock waves and other discontinuities, is the problem concerning the oblique reflection of a shock wave from a plane wall. It is well known [1–3] that two types of reflection are possible: regular and Mach. The problem concerning the regular reflection of a magnetohydrodynamic shock wave from an infinitely conducting plane wall is considered here within the scope of ideal magnetohydrodynamics [4]. It is supposed that the magnetic field, normal to the wall, is not equal to zero. The solution of the problem is constructed for incident waves of different types (fast and slow). It is found that, depending on the initial data, the solution can have a qualitatively different nature. In contrast from gasdynamics, the incident wave is reflected in the form of two waves, which can be centered rarefaction waves. A similar problem for the special case of the magnetic field parallel to the flow was considered earlier in [5, 6]. The normal component of the magnetic field at the wall was equated to zero, the solution was constructed only for the case of incidence of a fast shock wave, and the flow pattern is similar in form to that of gasdynamics. The solution of the problem concerning the reflection of a shock wave constructed in this paper is necessary for the interpretation of experiments in shock tubes [7–10].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 102–109, May–June, 1977.The author thanks A. A. Barmin, A. G. Kulikovskii, and G. A. Lyubimov for useful discussion of the results obtained.     

铝粉/空气二维黏性两相爆轰的数值模拟

为了深入研究爆轰波形成和传播的机理与特性,建立了管内铝粉/空气二维黏性两相爆轰过程的数学模型,采用守恒元与求解元方法进行数值计算,并对其物理参数的分布进行了分析。结果表明:管内燃烧转爆轰的初期,压力沿径向变化明显,与壁面碰撞有明显的反射波;燃烧转爆轰的中后期,压力沿轴向变化明显,但径向效应仍不能忽视,碰撞形成的反射波对最终稳定爆轰波的形成影响较大。研究结果同时表明:不仅铝粉颗粒初始半径对爆轰波的形成与传播有一定的影响;而且气体的黏性作用在研究爆轰管内近壁面处流场时不容忽视。研究结果有利于进一步揭示铝粉燃烧转爆轰的机理。     

Interaction between a vertical wall and a wave propagating in a channel of parabolic cross section

The reflection of a long wave from a vertical wall is studied on the assumption that the wave travels in a channel or river of parabolic cross section. According to [11], such cross sections are found in river beds formed in noncohesive soils. Expressions describing the evolution of the height of the wave at the vertical wall are obtained on the assumption that the exponent of the parabola takes the values k=2/(2n – 1). The conditions corresponding to the formation of a bore at the vertical wall are described.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 102–105, January–February, 1987.The author wishes to thank E. N. Pelinovskii for his interest in the problem.     

Initial stage of the collision of blast waves

The collision of two blast waves is analyzed for the case of variable parameters of the gas behind the wave front and wave reflection at a plane, a cylindrical, and a spherical obstacle. The reflection of a blast wave from a nonmoving obstacle is investigated in detail. The problem of the collision of two shock waves with constant parameters behind the front is solved both in the symmetrical case (reflection from a nonmoving wall) and in the case of waves of different amplitudes by a system of algebraic relations for the compression shocks. The reflection of a strong point-source spherical shock wave from a wall has been treated in [1, 2]. The present article examines the initial stage of wave collision for an arbitrary distribution of the parameters behind the front.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 41–48, September–October, 1971.The authors are grateful to V. P. Korobeinikov for a discussion of the results and to V. P. Kolgan for furnishing the numerical solutions.     

气相爆轰波在障碍物上Mach反射的实验验证

本文公布了气相爆轰波沿收缩管道传播时发生Mach反射的实验证据。在爆轰波通过的管道中安装不同楔角的楔块,形成管道的收缩。爆轰波在通过楔块时会发生Mach反射。利用烟熏玻璃片记录到了爆轰波Mach反射时形成的三波点迹线及其两侧胞格尺寸和密度的变化。据我们掌握的资料,这是首次用胞格结构变化的记录证实,气相爆轰波与无化学反应的空气中的冲击波一样,在一定的入射条件下会发生Mach反射。这一实验结果可使我们更深入了解爆轰波的本质,也为数值模拟气相爆轰波在障碍物上Mach反射现象提供了可对比的依据。     

可燃气体中激波聚焦的点火特性

数值模拟了二维平面激波从抛物面上反射在可燃气体中聚焦的过程,研究了形 成爆轰波的点火特性. 对理想化学当量比氢气/空气混合气体,在初始压强20kPa的条件下, 马赫数2.6-2.8的激波聚焦能产生两个点火区：第1个点火区是反射激波会聚引起的,第 2个点火区是由入射激波在抛物面上发生马赫反射引起的. 这种条件下流场中会出现爆燃转 爆轰,起爆点分别分布在管道壁面、抛物反射面和第2点火区附近. 起爆机理分别为激波管 道壁面反射、点火诱导激波的抛物面反射和点火诱导的激波与第2点火区产生的爆燃波的相 互作用. 不同的点火和起爆过程导致了不同的流场波系结构,同时影响了爆轰波传播的波动 力学过程.     

Flow of a gas behind a Chapman-Jouguet detonation wave in the vicinity of a line of discontinuity of a surface wave curvature

This paper discusses questions of constructing a solution of the gasdynamic equations near a line of curvature discontinuity at the surface of a detonation wave, propagating under Chapman—Jouguet conditions. It describes the construction of the solution in two cases: in a flow arising with the initiation of a detonation along a half-plane in a quiescent homogeneous combustible gas and in a flow arising with the initiation of a detonation along a half-line under these same conditions.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 120–126, January–February, 1978.     

Regular reflection of a shock wave from a solid wall in a stream of fuel mixture

The two-dimensional stationary problem of regular reflection of a shock wave from a plane solid wall in a fuel gas mixture is examined in the case when the mixture is ignited at the intersection of the incident wave with the wall and a flame front is formed behind the reflected shock wave. The shock waves and the flame front are considered plane surfaces of discontinuity. The fuel mixture and the reaction products are considered perfect, inviscid, and non-heat-conducting gases.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 161–163, July–August, 1978.     

Structure of detonation waves in gas suspensions of fuel containing the oxidant

The structure of detonation waves in air suspensions of unitary fuels (fuels containing an oxidant such as gunpowder and high explosives) is investigated. In such systems, complete combustion of the particles is possible at a high mass concentration of the fuel. As a result, the structure of detonation differs from that in gas-drop [1–3] and gas [4, 5] mixtures. The shock adiabats characteristic for air suspensions [6, 7] are used to investigate the field of integral curves which describe the structure of detonation waves in disperse media. Calculated distributions of the parameters which characterize the gas and particles in the detonation front are given. The influence of the rate of combustion of the particles and the intensity of interphase friction on the structure of the detonation is investigated. Results of the calculation of the structure of relaxation shock waves in gas suspensions of the solid fuel of rockets are given in [8]. Unsteady problems of convective combustion and the transition of combustion of air suspensions into detonation are analyzed in [9, 10].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 47–53, September–October, 1981.     

Transition from regular reflection to mach reflection when a shock wave interacts with a wall in a two-phase gas—liquid medium

A study is made of the transition from regular reflection to Mach reflection when a plane moderately strong or weak shock wave interacts with a wall in a two-phase gas—liquid medium. An equilibrium model that differs from the model of Parkin et al. [1] by the introduction of the adiabatic velocity of sound is used to investigate shock wave reflection in the complete range of gas concentrations. For the reflection of weak shock waves, nonlinear asymptotic expansions [2] are used. In the limiting cases, the results agree with those already known for single-phase media [2, 3].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 190–192, September–October, 1983.     

Multi-frame visualization for detonation wave diffraction

When a detonation wave emerges from a tube into unconfined space filled with a gas mixture, detonation wave diffraction occurs due to abrupt changes in the cross-sectional area. In the present study, we focused on the local explosion in reinitiation and propagation of a transverse detonation wave by performing comprehensive and direct observation with high time resolution visualization in a two-dimensional rectangular channel. Using the visualization methods of shadowgraph and multi-frame, short-time, open-shutter photography, we determined where the wall reflection point is generated, and also determined where the bright point is originated by the local explosion, and investigated the effects of the deviation angle and initial pressure of the gas mixture. We found that the reinitiation of detonation had two modes that were determined by the deviation angle of the channel. If the deviation angle was less than or equal to 30\(^{\circ }\), the local explosion of reinitiation might occur in the vicinity of the channel wall, and if the deviation angle was greater than or equal to 60\(^{\circ }\), the local explosion might originate on the upper side of the tube exit. With a deviation angle greater than 60\(^{\circ }\), the position of the wall reflection point depended on the cell width, so the radial distance of the wall reflection point from the apex of the tube exit was about 12 times the cell width. Similarly, the bright point (local explosion point) was located a distance of about 11 times the cell width from the apex of the tube exit, with a circumferential angle of 48\(^{\circ }\).     

Nonstationary problems of the combustion of aerosuspensions in fuel that contains the oxidant

A study is made of one-dimensional nonstationary problems of the combustion and detonation of aerosuspensions of unitary fuels or propellants, which contain the oxidant as well as the combustible material (gunpowder, high explosives). A numerical analysis is made of the damping of the convective combustion which occurs at relatively low mass concentrations of the fuel; the critical concentration dividing the damped and the detonation regimes is determined. It is shown that the realization of the damped or detonation regime of convective combustion at a given concentration is completely determined by the gas dynamics of the relative motion of the gas and the particles (two-velocity effect), this being governed by the coefficient of friction.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 22–27, January–February, 1981.     

气相爆轰波正反射激波加速研究

实验采用压力传感器测量了指定点压力时间曲线。数值模拟基于二维反应欧拉方程和基元反应模型,采用二阶附加半隐的龙格-库塔法和5阶WENO格式分别离散时间和空间导数项,获得了指定点数值压力时间曲线。理论分析基于爆轰理论和激波动力学,分析了气相爆轰波反射过程所涉及的复杂波系演变并获得了反射激波速度。结果表明:本文数值模拟和理论计算定性上重复并解释了实验现象。气相爆轰波在右壁面反射后,右行稀疏波加速反射激波。其加速原因是:尽管激波波前声速减小,但激波马赫数增大,波前气流速度减小。在低初压下,可能还由于爆轰波后未反应或部分反应气体的作用,导致反射激波加速幅度比高初压下大。     

Detonation Wave Propagation in Rotational Gas Flows

This paper studies the propagation of detonation and shock waves in vortex gas flows, in which the initial pressure, density, and velocity are generally functions of the coordinate — the distance from the symmetry axis. Rotational axisymmetric flow having a transverse velocity component in addition to a nonuniform longitudinal velocity is considered. The possibility of propagation of Chapman–Jouguet detonation waves in rotating flows is analyzed. A necessary conditions for the existence of a Chapman–Jouguet wave is obtained.     

Similarity motions of a gas in the case of local supply of mass and energy in a fuel mixture

One-dimensional nonstationary similarity motions of a gas with exothermic reactions behind shock waves are analyzed. The thickness of the region of chemical reactions is ignored. New solutions are obtained for the problems of flows of a chemically active gas with the formation of shock and detonation waves. In particular, it is shown that in the framework of the adopted schemes of the combustion process a solution with five strong-discontinuity surfaces can be constructed. The results are given of numerical solutions for supercompression detonation and Chapman-Jouguet detonation.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 70–77, July–August, 1979.     

Calculating the structure of detonation waves

Some results of calculations are shown which have been obtained for detonation waves with the fission of the explosive material occurring at a finite rate.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 3, pp. 73–80, May–June, 1971.     

Intensification of a detonation wave in the zone of secondary reactions in a two-phase medium

A method is proposed for the numerical calculation of one-dimensional nonsteady-state flows of a mixture of a gas with particles, based on the separation of a system of differential equations for a two-phase medium into two subsystems. The problem is solved concerning the propagation of a plane detonation wave in a mixture of a detonating gas with particles, behind the front of which secondary chemical reactions are taking place between the vapors of the particle material and the detonation products. The velocity profiles of the gas and of the thermodynamic functions behind the detonation wave front are determined, and also the dependence of the detonation velocity on the distance to the point of initiation. The conditions for intensification of the detonation wave are obtained in the zone of secondary reactions.Leningrad. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 92–96, September–October, 1972.     

The detonation burning of a fuel mixture resulting from a double explosion

A study is made of the propagation of a multifront detonation burning in a fuel mixture consisting of a gaseous fuel and an oxidant with additions of combustible solid or liquid particles arising as a result of a double point explosion. In such combustible media it is possible for there to be propagation of several detonation or burning fronts following one after the other. The easily igniting gaseous fuel burns in the first detonation wave, which propagates in the gaseous mixture with particles which are heated by the products of the explosion, ignite and burn in the second detonation wave or in the flame front. Self-similar regimes of propagation of such waves in an idealized formulation were studied in [1].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 126–131, March–April, 1985.