Spectral responses of gyrotropic chiral sculptured thin films to obliquely incident plane waves

Gyrotropic chiral sculptured thin films (STFs) exhibit optical activity due to their structural chirality, local anisotropy, and magneto-optic gyrotropy. We adapted two algorithms for nongyrotopic chiral STFs to investigate the circular-polarization-sensitivity of gyrotropic chiral STFs to incident plane waves. The impacts of gyrotropy and oblique angles of incidence on the reflectances and the transmittances were examined, and several conclusions drawn. In particular, we found that the incorporation of gyrotropy results in a blueshift of the Bragg regime.     

Electrically controlled reflection and transmission of obliquely incident light by structurally chiral materials

The solution of a boundary-value problem for the reflection and transmission of obliquely incident plane waves due to a slab of a structurally chiral material (SCM) displaying the Pockels effect with a point group symmetry indicates the enhancement of circular Bragg phenomenon by the application of a dc voltage. The enhancement suggests that thinner SCMs can be used as devices such as polarization-rejection filters if the Pockels effect is exploited, for both normally and obliquely incident light.     

Effect of ambient hydrogen sulfide on the physical properties of vacuum evaporated thin films of zinc sulfide

Evaporated thin films of zinc sulfide (ZnS) have been deposited in a low ambient atmosphere of hydrogen sulfide (H₂S ∼10⁻⁴ Torr). The H₂S atmosphere was obtained by a controlled thermal decomposition of thiourea [CS(NH₂)₂] inside the vacuum chamber. It has been observed that at elevated substrates temperature of about 200 °C helps eject any sulfur atoms deposited due to thermal decomposition of ZnS during evaporation. The zinc ions promptly recombine with H₂S to give better stoichiometry of the deposited films. Optical spectroscopy, X-ray diffraction patterns and scanning electron micrographs depict the better crystallites and uniformity of films deposited by this technique. These deposited films were found to be more adherent to the substrates and are pinhole free, which is a very vital factor in device fabrication.     

Ion-induced secondary electron emission from ZnS thin films deposited by closed-spaced sublimation

ZnS thin films were deposited on soda lime glass and aluminum substrates by close-spaced sublimation technique. The change in composition, structural and optical properties of the films was investigated as a function of the substrate temperature. The deposited films were stoichiometric and crystalline in nature having cubic structure oriented only along (1 1 1) plane. The energy band gap of the films deposited at the substrate temperature of 150, 250 and 350 °C was 3.52, 3.58 and 3.63 eV respectively. These films were then bombarded with 2-10 keV energy pulsed Ar⁺ beam and their electron yield was determined from impinging ion and emitted electron currents. The electron yield of ZnS films was much high as compared to the metals. The electron yield of ZnS films increased with energy of the incident ion and got saturated at about 8 keV. The most important result of this study was that the electron yield of ZnS films having same composition was different. Monte Carlo simulations performed to interpret these experimental findings showed that the dissimilar electron yields of ZnS films is due to the combined effect of energy band gap, surface barrier potential and density of the films.     

Luminescent characteristics of CaTiO3:Pr thin films prepared by pulsed laser deposition method with various substrates

CaTiO₃:Pr³⁺ films were deposited on different substrates such as Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica using pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by XRD and SEM measurements. The films grown on the different substrates have different crystallinity and morphology. The FWHM of (2 0 0) peak are 0.18, 0.25, 0.28, and 0.30 for Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica, respectively. The grain sizes of phosphors grown on different substrates were estimated by using Scherrer's formula and the maximum crystallite size observed for the thin film grown on Al₂O₃ (0 0 0 1). The room temperature PL spectra exhibit only the red emission peak at 613 nm radiated from the transition of (¹D₂ → ³H₄) and the maximum PL intensity for the films grown on the Al₂O₃ (0 0 0 1) is 1.1, 1.4, and 3.7 times higher than that of the CaTiO₃:Pr³⁺ films grown on MgO (1 0 0), Si (1 0 0), and fused Sillica substrates, respectively. The crystallinity, surface morphology and luminescence spectra of thin-film phosphors were highly dependent on substrates.     

Transmission properties of one-dimensional graded photonic crystals and enlargement of omnidirectional negligible transmission gap

We investigate numerically the transmission properties of one-dimensional (1D) graded photonic crystals (PCs) in detail. Under the condition of linearly graded structures, the gap broadening of three cases is calculated: the case when the thickness of low index layer is increased, the case when the thickness of high index layer is increased and the case when the thickness values of both layers are increased simultaneously. Then the gap broadening of another graded case with the thickness exponentially increased is presented. At last the enlargement of omnidirectional negligible transmission band gap is obtained.     

Crystalline and photoluminescence characteristics of YVO4:Sm thin films grown by pulsed laser deposition under oxygen pressure

YVO₄:Sm³⁺ films were deposited on Al₂O₃ (0 0 0 1) substrates at various oxygen pressures changing from 13.3 to 46.6 Pa by using the pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by means of X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. The XRD pattern confirmed that YVO₄:Sm³⁺ film has zircon structure and the AFM study revealed that the films consist of homogeneous grains ranging from 100 to 400 nm. The room temperature photoluminescence (PL) spectra showed that the emitted radiation was dominated by a reddish-orange emission peak at 602 nm radiating from the transition of (⁴G_5/2→⁶H_7/2). The crystallinity, surface morphology, and photoluminescence spectra of thin-film phosphors were highly dependent on the deposition conditions, in particular, the substrate temperature. The surface roughness and photoluminescence intensity of these films showed similar behavior as a function of oxygen pressure.     

Enhanced luminescent characteristics of laser-ablated GdVO4:Eu thin films by Li-doping

Li-doping has been used to improve luminescent characteristics of thin films. Influence of Li-doping on the crystallization, surface morphology and luminescent properties of GdVO₄:Eu³⁺ films have been investigated. Crystallinity and surface morphology of thin films have been very important factors to determine luminescent characteristics and depended on the deposition conditions. The GdVO₄:Eu³⁺ and Li-doped GdVO₄:Eu³⁺ thin films have been grown using pulsed laser deposition method on Al₂O₃ (0 0 0 1) substrates at a substrate temperature of 600 °C under an oxygen pressure of 13.33-53.33 Pa. The crystallinity and surface morphology of the films were investigated using X-ray diffraction (XRD) and atomic force microscope (AFM), respectively. A broadband incoherent ultraviolet light source with a dominant excitation wavelength of 310 nm and a luminescence spectrometer have been used to measure photoluminescence spectra at room temperature. The emitted radiation was dominated by the red emission peak at 619 nm radiated from the transition of ⁵D₀-⁷F₂ of Eu³⁺ ions. Particularly, the peak intensity of Li-doped GdVO₄ films was increased by a factor of 1.7 in comparison with that of GdVO₄:Eu³⁺ films. The enhanced luminescence results not only from the improved crystallinity but also from the reduced internal reflections caused by rougher surfaces. The luminescent intensity and surface roughness exhibited similar behavior as a function of oxygen pressure.     

Write-once blue laser recording using silicon doped SbOx thin films prepared by reactive dc-magnetron sputtering

Si:SbO_x films have been deposited by reactive dc-magnetron sputtering from a Sb target with Si chips attached in Ar + O₂ with the relative O₂ content 7%. The as-deposited films contained Sb metal, Sb₂O₃, SiO, Si₂O₃ and SiO₂. The crystallization of Sb was responsible for the changes of optical properties of the films. The results of the blue laser recording test showed that the films had good writing sensitivity for blue laser beam (406.7 nm), and the recording marks were still clear even if the films were deposited in air 60 days, which demonstrated that doping silicon in SbO_x films can improve the stability of SbO_x films. High reflectivity contrast of about 36% was obtained at a writing power 6 mW and writing pulse width 300 ns.     

Correlation of the left- and the right-handed circularly polarized waves in an anisotropic crystal

An optical torque is induced by incidence of the linearly polarized light and propagating through an anisotropic crystal, which results in self-modulation of the ordinary and the extraordinary waves and causes an energy splitting of the resultant left-, and the right-handed elliptically polarized waves. The optical torque originates from the angular momentum of light, which causes the correlation of the left- and the right-handed circularly polarized waves in the crystal.     

Ellipsometric characterization of PbI2 thin film on glass

The optical properties of polycrystalline lead iodide thin film grown on Corning glass substrate have been investigated by spectroscopic ellipsometry. A structural model is proposed to account for the optical constants of the film and its thickness. The optical properties of the PbI₂ layer were modeled using a modified Cauchy dispersion formula. The optical band gap E_g has been calculated based on the absorption coefficient (α) data above the band edge and from the incident photon energy at the maximum index of refraction. The band gap was also measured directly from the plot of the first derivative of the experimental transmission data with respect to the light wavelength around the transition band edge. The band gap was found to be in the range of 2.385±0.010 eV which agrees with the reported experimental values. Urbach's energy tail was observed in the absorption trend below the band edge and was found to be related to Urbach's energy of 0.08 eV.     

ZnSe sintered films: Growth and characterization

The II-VI compound semiconductor, ZnSe having wide band gap between 2.58 and 2.82 eV is a promising material for use in photovoltaic devices, blue light emitting diodes and laser diodes. Several methods have been used to prepare ZnSe thin films. We have deposited ZnSe films on ultra-clean glass substrate by sintering technique. The optical, structural and electrical properties of ZnSe thin films have been examined. The optical band gap of these films is studied using reflection spectra in wavelength range 325-600 nm and structure of these films is studied using XRD. The DC conductivity of the films was measured in vacuum by two-probe technique.Sintering is a very simple and viable method compared to other intensive methods. The results of the present investigation will be useful in characterizing the material ZnSe for its applications in photovoltaics.     

Highly enhanced photoluminescence and X-ray excited luminescence of Li doped Gd2O3:Eu thin films

Transparent Li-doped Gd₂O₃:Eu³⁺ thin-film phosphors were prepared by a modified sol-gel method. The effect of the Li⁺ ions on luminescent properties of the thin film was investigated. The results indicated that incorporation of Li⁺ ions into Gd₂O₃ lattice could result in a remarkable increase on photoluminescence or X-ray excited luminescence, and the strongest emission was observed from Gd_1.84Li_0.08Eu_0.08O_3−δ film, in which the intensity was increased by a factor of 1.9 or 2.3 in comparison with that of Gd_1.92Eu_0.08O₃ film. And it could be achieved the highest intensity for sintering the Gd_1.84Li_0.08Eu_0.08O_3−δ film at 700 °C. Such a temperature is much lower than the typical solid-state reaction temperature for its powder phosphors. This kind of transparent thin-film phosphors may promise for application to micro X-ray imaging system.     

Effect of substrate temperature on the growth of ITO thin films

Indium tin oxide (ITO) thin films were deposited onto glass substrates by rf magnetron sputtering of ITO target and the influence of substrate temperature on the properties of the films were investigated. The structural characteristics showed a dependence on the oxygen partial pressure during sputtering. Oxygen deficient films showed (4 0 0) plane texturing while oxygen-incorporated films were preferentially oriented in the [1 1 1] direction. ITO films with low resistivity of 2.05 × 10⁻³ Ω cm were deposited at relatively low substrate temperature (150 °C) which shows highest figure of merit of 2.84 × 10⁻³ square/Ω⋅     

Intrinsic birefringence in (11N)-oriented quantum wells of cubic crystals

The effect of natural birefringence in (11N) oriented Quantum Wells (QWs) due to the in-plane optical anisotropy is investigated. The birefringence is more pronounced, the stronger the anisotropy of hole effective masses and larger the splitting of the heavy- and light-hole sub-bands. The magnitude of the effect is maximum in (110)-oriented QWs. An order-of-magnitude estimation of the effect in QWs of GaAs and of ZnSe is given.     

Low temperature deposition of TiO2 thin films on polyvinyl alcohol fibers with photocatalytical and antibacterial activities

Fine particles of photoactive anatase-type TiO₂ coated polyvinyl alcohol (PVA) fibers (TiO₂/PVA) were prepared successfully via a simple dip-coating method. Tetrabutyl orthotitanate (TBOT) was hydrolyzed in presence of hydrolysis control agent tetrabutylammonium hydroxide (TBA)OH and the TiO₂ fine particles were crystallized under microwave (MW) irradiation. The X-ray diffraction (XRD) and selected-area electron diffraction (SAED) analyses indicated that the fine particles obtained with MW irradiation have much higher crystallinity with a single phase anatase compared with the non-MW-treated solution. The continuous layers of titania were found on PVA fibers by the scanning electron microscopy (SEM) analysis. The fibers with anatase coatings showed high photocatalytic property on the photodegradation of methylene blue (MB) and high antibacterial activity.     

Post-deposition atomic terraces growth of ZnO thin films deposited on epi-GaN templates

We demonstrate how growth processes affect on ZnO film properties, which are to be essential guides to prevent defect formation in order to synthesize reproducible high quality ZnO films. First, we reveal that deposition at a low temperature is indispensable to transfer underlying GaN atomic terraces to ZnO surface. As the film thickness is increased, however, the terraces disappear to develop island morphology. It is found that the thick film surface is smoothed to the extent that atomic terraces can be seen after an appropriate thermal treatment. Adverse effects associated with high annealing temperatures are then demonstrated as evidenced by cracks formation, increased yellow cathode-luminescence and intermixing at the interface.     

Characteristics of sculptured Cu thin films and their optical properties as a function of deposition rate

Sculptured copper thin films were deposited on glass substrates, using different deposition rates. The nano-structure and morphology of the films were obtained, using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). Their optical properties were measured by spectrophotometry in the spectral range of 340-850 nm. The real and imaginary refractive indices, film thickness and fraction of metal inclusion in the film structure were obtained from optical fitting of the spectrophotometer data.     

The preparation and refractive index of BST thin films

Radio-frequency magnetron sputtering technique is used to deposit Ba_0.65Sr_0.35TiO₃ (BST) thin films on fused quartz substrates. In order to prepare the high-quality BST thin films, the crystallization and microstructure of the films were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). More intense characteristic diffraction peaks and better crystallization can be observed in BST thin films deposited at 600 °C and subsequently annealed at 700 °C. The refractive index of the films is determined from the measured transmission spectra. The dependences of the refractive index on the deposition parameters of BST thin films are different. The refractive index of the films increases with the substrate temperature. At lower sputtering pressure, the refractive index increases from 1.797 to 2.197 with pressure increase. However, when the pressure increases up to 3.9 Pa, the refractive index reduces to 1.86. The oxygen to argon ratio also plays an important effect on the refractive index of the films. It has been found that the refractive index increases with increase in the ratio of oxygen to argon. The refractive index of BST thin films is strongly dependent on the annealing temperature, which also increases as the annealing temperature ascends. In a word, the refractive index of BST thin films is finally affected by the films’ microstructure and texture.     

Crystallinity and morphology dependent luminescence of Li-doped Y2−xGdxO3:Eu thin film phosphors

The influence of lithium doping on the crystallization, the surface morphology, and the luminescent properties of pulsed laser deposited Y_2−xGd_xO₃:Eu³⁺ thin film phosphors was investigated. The crystallinity, the surface morphology, and the photoluminescence (PL) of films depended highly on the Li-doping and the Gd content. The relationship between the crystalline and morphological structures and the luminescent properties was studied, and Li⁺ doping was found to effectively enhance not only the crystallinity but also the luminescent brightness of Y_2−xGd_xO₃:Eu³⁺ thin films. In particular, the incorporation of Li and Gd into the Y₂O₃ lattice could induce remarkable increase in the PL. The highest emission intensity was observed Li-doped Y_1.35Gd_0.6O₃:Eu³⁺ thin films whose brightness was increased by a factor of 4.6 in comparison with that of Li-doped Y₂O₃:Eu³⁺ thin films.