Imaging of rotating objects by means of synthesized optical holograms

A scheme is presented for producing optical holograms of rotating objects by illuminating the object by a single-frequency coherent laser beam. Along one axis, the synthesis takes place due to rotation of the object; along the other axis, the hologram is synthesized by the coherent radiation field generated by a long linear optical antenna. Numerical simulation shows that reliable discrimination of object images from the accompanying background is possible, for point objects, using a single hologram recorded at one angular position and, for extended flat objects or thin cylinder-like objects, using holograms recorded at two or three angular positions. If the holograms are synthesized in the presence of normally distributed random phase noise, the quality of the reconstructed images of rotating objects remains sufficiently high for root-mean-square noise amplitudes exceeding π/2 and reaching the limiting value 2π/3.     

Transient vibration measurements using multi-pulse digital holography

An optical system for the evaluation of transient deformations will be described. In order to increase the temporal resolution, a ruby laser producing four pulses has been used. Four separate digital holograms (one hologram for each pulse) of the test object are recorded in a few microseconds on three CCD sensors. The Fourier method is used for the quantitative evaluation of the digital holograms. The phases are obtained from the complex amplitudes, and the deformation at different times is calculated from phase subtraction. Experimental results are presented.     

Multiple holographic transmission gratings in silver halide emulsion

Holograms, recorded in silver halide emulsion by a plane reference wave andN cylindrical object waves, are measured as a function of the replay beam angle both for sequential and simultaneous recording. A theoretical model, based on coupled-wave differential equations, is presented. Numerical results for theN=3 case are compared with experiments and good agreement is found. Cross-modulation effects caused by simultaneous recording are discussed and are shown to be detrimental to the fidelity of reproduction of the original object beams. The results are relevant to more general hologram configurations, e.g., display holograms.     

Hologram multiplexing in acrylamide hydrophilic photopolymers

Unslanted diffraction gratings are recorded in a 900 μm thick acrylamide photopolymer by means of peristrophic multiplexing. A solid state Nd:YAG (λ = 532 nm) laser is used as the recording beam, with a total incident intensity of 5 mW/cm², and a He-Ne laser as the reconstruction beam. The dye concentration in the photopolymer is optimized so that it does not limit the dynamic range. Nine holograms are recorded using constant exposure time scheduling and variable exposure time scheduling. From the results obtained it may be deduced that optimization of the dye allows us to work in the linear response region of the photopolymer and at the same time obtain high values of diffraction efficiency for each hologram. An exponential increase in exposure time as the number of holograms increases enables the values of diffraction efficiency to be homogenized with regard to the case of constant exposure scheduling. In this way, better use is made of the dynamic range of acrylamide hydrophilic photopolymer.     

Multiplexed phase-conjugate holographic data storage with a buffer hologram

We describe and demonstrate a volume holographic storage system in which a phase-conjugate object beam is reconstructed by the same reference beam that was used for recording. An intermediate hologram is used as a temporary buffer, recorded with its own reference beam and the data-bearing object beam. Reading this buffer hologram with the phase conjugate of its reference beam reconstructs the phase conjugate of the object beam, which can then be recorded into the desired volume hologram for long-term storage. This method combines the immunity to lens aberrations provided by phase-conjugate readout with the simplicity of using the same multiplexed reference beam for both recording and readout. Only a single pair of phase-conjugate reference beams is required. Experimental results are shown with a single LiNbO(3):Fe crystal used as both buffer and storage holograms and a self-pumped phase-conjugate mirror in BaTiO(3) that provides the pair of phase-conjugate reference beams.     

基于螺旋相位调制的非相干全息点扩散函数研究

分析了菲涅耳非相干相关全息(Fresnel incoherent correlation holography,FINCH)系统中纯相位空间光调制器(spatial light modulator,SLM)加载螺旋相位掩模时的点扩散函数.以氙灯为照明光源搭建了FINCH系统,电荷耦合器记录的点源全息图与点扩散函数模拟结果一致.采用该系统分别在SLM上加载双透镜掩模和螺旋相位调制双透镜掩模两种情况下对分辨率板和非染色洋葱细胞成像,给出了成像对比结果.结果表明:采用螺旋相位调制的FINCH系统可以在几乎不牺牲分辨率的情况下提高图像的边缘对比度;同样,对相位物体也可以实现图像的边缘提取和识别.该方法在实时监测活细胞的分裂、形变等方面具有重要应用前景.     

Digital spatially incoherent Fresnel holography

We present a new method for recording digital holograms under incoherent illumination. Light is reflected from a 3D object, propagates through a diffractive optical element (DOE), and is recorded by a digital camera. Three holograms are recorded sequentially, each for a different phase factor of the DOE. The three holograms are superposed in the computer, such that the result is a complex-valued Fresnel hologram. When this hologram is reconstructed in the computer, the 3D properties of the object are revealed.     

Visualized measurement of the acoustic levitation field based on digital holography with phase multiplication

By using digital holographic interferometory with phase multiplication, the visualized measurement of the acoustic levitation field (ALF) with single axis is carried out. The digital holograms of the ALF under different conditions are recorded by use of CCD. The corresponding digital holographic interferograms reflecting the sound pressure distribution and the interference phase distribution are obtained by numerical reconstruction and phase subtraction, which are consistent with the theoretical results. It indicates that the proposed digital holographic interferometory with phase multiplication can successfully double the fringe number of the interference phase patterns of the ALF and improve the measurement precision. Compared with the conventional optical holographic interferometory, digital holographic interferometory has the merits of quasi real-time, more exactitude and convenient operation, and it provides an effective way for studying the sound pressure distribution of the ALF.     

New azo-dye-doped polymer systems as dynamic holographic recording media

Polymer materials show their impact on optical storage technology for developing high information density and fast access-type memories with a high read-out efficiency. New azo-dye-doped polymer materials have been developed and used for recording dynamic holograms. Dynamic holograms with reasonably high diffraction efficiency have been recorded at 468 nm, and the efficiency of the Write, Read and Erase (WRE) cycle in these azo-dye-doped polymer materials was determined. Significant observations in these materials are: (i) there is no need to change the polarization of the writing beam to erase the recorded holograms, (ii) the whole WRE cycle is very fast (3–6 s) and (iii) recording of more than 250 WRE cycles without any fatigue of the recording materials is possible.     

Display method with compensation of the spatial frequency response of a liquid crystal spatial light modulator for holographic femtosecond laser processing

Liquid crystal spatial light modulators, which are widely used as display devices for computer-generated holograms, have modulation characteristics that depend on spatial frequency. We describe a method for displaying a computer-generated hologram on a liquid crystal spatial light modulator with compensation of its spatial frequency response. Using this method, we demonstrate a binary phase grating with smaller dependence on the spatial frequency. We also demonstrate application of the display method to holographic femtosecond laser processing.     

Interferometric key readable security holograms with secrete-codes

A new method is described to create secrete-codes in the security holograms for enhancing their anti-counterfeiting characteristics. To imitate these codes is difficult as pure phase objects having complex phase distribution function are used to modulate the object beam that is recorded in conjunction with an encoded interferometric reference beam derived from a key hologram. Lloyd’s folding mirror interferometer is used to convert phase variations of the reconstructed wave-front into an intensity pattern for hologram authenticity verification. Creating the secrete-codes through an interferometric reference beam from the key hologram facilitates a multi-stage authenticity verification as well as easy repositioning of the security hologram through a specific Moiré pattern generated during the verification process.      

Application of interference microscopy to the study of hologram build-up in LiNbO3 crystals

Interference microscopy was applied to direct microscopic observation of temporal evolution of phase holograms in LiNbO₃:Fe photorefractive crystals. First a hologram was recorded in the sample, and diffraction efficiency was monitored during hologram build-up using inactinic laser light. Thus kinetics of hologram build-up could be determined. The initial hologram was erased using white light. Then a series of write-erase cycles were performed with increasing exposure times. Holograms were observed by interference microscope after each exposure. The time elapsed between the exposure and the microscopic observation was negligible compared to the relaxation time of the hologram. The obtained temporal evolution of the grating profile gives a deeper insight into the physical mechanism of hologram formation in photorefractive materials than simple diffraction efficiency measurements. A congruently grown sample of LiNbO₃ doped with 10⁻³ mol/mol Fe in melting was studied by this method. Sample thickness was set to 300 μm to allow correct microscopic observation. Plane-wave holograms were recorded in the samples using an Ar-ion laser at λ = 488.0 nm of grating constants of 3, 6.5 and 8.8 μm.     

Cross-talk free image encryption and watermarking by digital holography and random composition

In previous image watermarking methods an encoded host image and a watermark image are usually directly added, consequently the two images have cross-talk in the decryption step. To eliminate this effect, we propose a novel method based on digital holography, in which all the image pixels of the two sets of holograms resulted from two hidden images are rearranged and integrated into one set of composite holograms with a random scattering matrix (RSM). In decryption the use of this matrix can ensure the exact retrieval of each hologram, and then the perfect reconstruction of each image without cross-talk noise can be achieved. The feasibility of this method and its robustness against occlusion and additional noise are verified by computer simulations with phase-shifting interferometry and double random-phase encoding technique. This approach is suitable for both two- and three-dimensional images, and the additional RSM as a key provides a much higher level of security.     

Characteristics of fourier phase holograms recorded on photopolymers

The results of the investigation of recording Fourier phase holograms on a self-developing photopolymer photosensitive in the range λ=400–515 nm are presented. It has been found that, due to the transient energy transfer between the beams, noise gratings are recorded, and a corresponding sharp reduction in the signal-to-noise ratio occurs, while the diffraction efficiency of the hologram as a whole remains relatively high (above 50%). It has been found that the noise-grating recording can be substantially suppressed by increasing the intensity of the reference beam relative to the intensity of the object beam. In this way, the signal-to-noise ratio has been considerably improved for Fourier holograms of binary phase masks: at a reference to object beam intensity ratio R=26, Fourier phase holograms are recorded with a diffraction efficiency η=15% and signal-to-noise ratio N=20 dB.     

Multiple-exposure high-sensitivity holographic interferometry for studying moving objects

A method for increasing the sensitivity of measurements through aberration compensation upon reconstruction of interferograms from two multiple-exposure holograms is proposed. At the early stage of object investigation, the holographic structures recorded at certain time instants are rerecorded by two coherent beams on new image carriers. In this case, the interference moiré method is employed to monitor the equality of the vectors of the holographic structures rerecorded. At the final stage, the new nonlinear holograms are processed in an optical analyzer of conjugate holograms with the use of incoherent light. The hologram thus reconstructed offers a high sensitivity of measurements and is free of aberrations. The method is tested by visualizing the temperature-field variations in a glass substrate with a conducting coating.     

轨道嵌套多像全息记录

根椐椭圆的性质，介绍了将大小不同的椭圆按一定的约束条件形成轨道嵌套多像全息记录的方法。这种方法利用全息台在实验室里可进行多像全息记录，避免了实验时为了调节物光与参考光光程相等所带来的反复测量光程的麻烦，实现把同一时刻空间分离的若干物体或一个物体不同视角的信息同时记录在一张全息图上，得到这些物体的三维全息图，即全息图片上同时再现出多个物体的像，或一个物体不同位置的视图的合成。     

基于相位共轭的动态体全息衍射特性的实时非破坏性测量

基于相位共轭技术,提出了一种动态体全息衍射特性的实时测量方法.在光学系统设计中,通过调整使得物光和参考光较强,而与参考光共轭的再现光非常弱（约为参考光的1/1 000）,借助非常微弱的共轭再现光实现了动态体全息的非破坏性实时测量.三束光的强度和偏振态可通过1/4波片、偏振片和衰减片进行调节和组合,可记录光强调制型或偏振态调制型体全息.本方法适合于光致折射率变化和光致变色材料体全息的测量.     

Diffraction efficiency and signal-to-noise ratio of multiplexed volume phase holograms recorded in a photographic emulsion

The problems related to noise that arise during recording and reconstruction of holograms used in optical data storage or in massive optical interconnection systems are quite similar and can be analyzed in order to improve the quality of the images that these optical systems provide. In this paper, we will analyze noise in cases in which several coherent object waves are simultaneously stored in a phase recording material in a way that allows us to obtain information about the relationship that exists between the recording material and the number of waves that are being stored. The material used in this study is Agfa Gevaert 8E75 HD holographic film processed with a rehalogenating—type bleach bath without a fixation step. Additionally, we show experimentally that it is possible to holographically store more than 400 waves at the same time (in a coherent fashion) using the same storage geometry, with a signal-to-noise ratio larger than 20 and an average diffraction efficiency of 15%.     

基于空间光调制器的非相干数字全息单次曝光研究

菲涅耳非相干相关全息术(Fresnel incoherent correlation holography,FINCH)利用在空间光调制器(spatial light modulator,SLM)上加载双透镜模式对同一物点光分束自相干,并通过改变加载的相位因子得到不同的相移全息图.本系统利用SLM可分区编码调制特性,将FINCH成像中SLM上分三次加载的0°,120°,240°相位双透镜掩模各提取1/3组成一幅复合相移模式加载,并研究了三种相位分布方式对FINCH成像质量的影响.结果表明:三个相位在SLM上分布间隔越大,再现像越清晰.在此基础上,提出了一种新的掩模加载方式,在SLM加载透镜阵列,每一个相位因子对应一个双透镜,具有一个光轴.实验表明,通过这种加载方式,通过SLM后形成的三个相移图能够一次在电荷耦合器上记录,并且三个相移图不重叠,然后通过MATLAB编程计算将不同相移角度的全息图分别提取出来,通过三步相移计算合成一幅包含有物光波的复值全息图,最后通过数值再现算法重建待测样品.此系统可用于对光源相干性较低的实时成像系统,也为微小形变测量、动态物体的观测提供了新方法,为非相干数字全息术的发展提供了新思路.     

Incoherent recovering of the spatial resolution in digital holography

We report on a technique to recover the spatial resolution of digitally recorded and reconstructed holograms of large objects. Due to the high-contrast speckle noise diminishes the spatial resolution in coherent imaging systems our proposal is based on the reduction of the contrast of it. This aim is achieved through the superposition on an intensity basis of digitally reconstructed holograms of the same static scene. We show a theoretical justification of the procedure and experimentally-obtained results of applying the technique with digitally reconstructed holograms of an object with very poor optical contrast.