Simultaneous strain and temperature measurement using a highly birefringence fiber loop mirror and a long-period grating written in a photonic crystal fiber

We present a new design for simultaneous strain and temperature measurement using a high-birefringence fiber loop mirror (HiBi-FLM) concatenated with a temperature-insensitive long-period grating (LPG) written in a photonic crystal fiber (PCF). The FLM acts as a sensor head, while the LPG in PCF serves as a filter to convert wavelength variation to optical power change. By measuring the wavelength variation and the power difference of two near peaks in the spectral response of this configuration, simultaneous strain and temperature measurement is obtained.     

Optimization of long-period grating inscribed in large mode area photonic crystal fiber for design of bandstop filter

By inscribing long period grating (LPG) in a photonic crystal fiber (PCF), optical filters for communication wavelengths can be fabricated. In this paper, by utilizing coupled-mode theory and enhanced improved vectorial effective index method, a design of bandstop filter based on optimal LPG parameters is presented where the optimized full-width half-maximum (FWHM), the number (N) and total length of gratings of LPGs (L) are determined. As a result, by the determination of optimized LPG parameters with an optimum length of L_opt=6.5 mm and optimum number of grating N_opt=27 inscribed in the PCF, a bandstop optical filter with FWHM=1 nm is designed.     

Four-wave mixing self-stability based on photonic crystal fiber and its applications on erbium-doped fiber lasers

The analytic solutions of coupled-mode equations of four-wave mixings (FWMs) are achieved by means of the undepleted approximation and the perturbation method. The self-stability mechanism of the FWM processes is theoretically proved and is applicable to design a new kind of triple-wavelength erbium-doped fiber lasers. The proposed fiber lasers with excellent stability and uniformity are demonstrated by using a flat-near-zero-dispersion high-nonlinear photonic-crystal-fiber. The significant excellence is analyzed in theory and is proved in experiment. Our fiber lasers can stably lase three waves with the power ripple of less than 0.4 dB.     

Radio-frequency interrogation of a fiber Bragg grating sensor in the configuration of a fiber laser with external cavities

A fiber laser sensor, which consists of two coupled cavities based on three fiber Bragg gratings (two of them acting as sensing elements) and is interrogated via the longitudinal mode beating frequency, is presented. The two resonant cavities have lengths of 4250 m and 4297 m, respectively. Their beating frequency is of the order of 24 kHz, and its shift as a function of the variation of the period of one (or both) of the sensing gratings, induced by strain or temperature changes, can be measured by a radio-frequency analyzer. The system is suitable for long-distance sensing with high spatial resolution and high sensitivity.     

A simple temperature-insensitive fiber Bragg grating displacement sensor

The study on fiber Bragg grating (FBG) displacement sensor based on monitoring the back-reflected power from an array of novelly embedded FBG sensors is presented. The sensor is a uniform FBG with three sections that are embedded in different layer in a composite lamina. Its bandwidth is displacement dependent and hence its reflected power varies almost linearly with displacement and it is insensitive to temperature variation. Thus, only low-cost photodetector (PD) is required to monitor displacement. This study demonstrates a novel fiber sensor, a method of fabricated the same, and a method to achieve simultaneous multi-sensor measurement.     

Numerical analysis of a temperature sensor based on the photonic band gap effect in a photonic crystal fiber

In this paper we investigate, by the plane wave expansion method and an analytical model, the temperature effect on the photonic band gap fiber, and we report on a numerical demonstration of a temperature sensor based on the photonic band gap (PBG) shift in a solid core photonic crystal fiber (PCF) infiltrated with a high refractive index oil. The bandwidth and the position of the central wavelength of the band gap are the parameters of interests for our temperature sensing purpose. Simulation results were found to be in excellent agreement with the refractive index scaling law and the highest sensitivity of 3.21?nm/°C was achieved, and it will be even higher than the grating based sensors written in PCFs with similar structure.     

A review of photonic crystal fiber sensor applications for different physical quantities

Since the early conceptual and practical demonstrations in the late 1990s, photonic crystal fibers (PCFs) have attracted considerable interest by virtue of their promise to deliver a unique range of optical properties that are simply not possible in standard fiber types. Hollow-core photonic band gap fiber has the potential to overcome some of the fundamental limitations of solid fiber as they also provide a unique medium for a range of light. PCF also be used as a unique optical material to make sensors due to the air-holes that can be filled with different materials (liquid, gas or even solid) to alter the difference of refractive index (RI) in the two modes, has been used in various sensing search fields. The application of PCF on physical quantities is discussed, and the recent results on temperature, magnetic, strain and vibration are reviewed. These developments demonstrate that the enlarged complexity and decreased accuracy of sensors offered by PCF make it useful in a wide range of engineering monitoring applications.     

On a fiber grating sensor system with the capacity of cross-sensitivity discrimination

A novel fiber Bragg grating (FBG) sensor system based on an interrogating technique by two parallel matched gratings was designed and theoretically discussed. With an interrogation grating playing the role of temperature compensation grating simultaneously, the wavelength drifts induced by temperature and strain were discriminated. Additionally, the expressions of temperature and strain were deduced for our solution, and dual-value problem and cross sensitivity were solved synchronously through data processing. The influence of the FBG's parameters on the dynamic range and precision was discussed. Besides, the change of environment temperature cannot influence the dynamic range of the sensor system through temperature tuning. The system proposed in this paper will be of great significance to accelerate the real engineering applications of FBG sensing techniques.     

Sensing properties of fiber Bragg gratings in small-core Ge-doped photonic crystal fibers

We report about fiber Bragg gratings (FBGs) inscribed in two different types of small-core Ge-doped photonic crystal fibers with a UV laser. Sensing properties of the FBGs were systematically investigated by means of demonstrating the responses of Bragg wavelengths to temperature, strain, bending, and transverse-loading. The Bragg wavelength of the FBGs shifts toward longer wavelengths with increasing temperature, tensile strain, and transverse-loading. Moreover, the bending and transverse-loading properties of the FBGs are sensitive to the fiber orientations. The reasonable analyses for these sensing properties also are presented.     

Simultaneous strain and temperature measurement based on a photonic crystal fiber modal-interference interacting with a long period fiber grating

An alternative all-fiber sensor for simultaneous strain and temperature measurement based on a photonic crystal fiber (PCF) spliced between single-mode fibers cascaded with a long period grating (LPG) is proposed. By collapsing the air holes at two splicing regions along the PCF, a simple but effective modal-interference (MI) is occurred between the core and cladding modes of the PCF. Due to the different responses on the changes of strain and temperature on the MI and the cascaded LPG, the strain and temperature can be measured simultaneously. Experimental results show that the sensing resolution of 9.1 με in strain measurement is experimentally achieved over a range of 2640 με, while the temperature sensing resolution is 0.27 °C within a range of 30-100 °C.     

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

In this work, we describe a fiber Bragg grating (FBG) sensing system using two wavelength-matched FBG sensors for static and dynamic strain measurement. A cascaded long-period fiber grating (CLPG)-based demodulation technique has been used to interrogate the two wavelength-matched FBG sensors. Experimental results of static strain measurement show that the proposed system has a strain resolution of 1 με. This system has also been used for dynamic strain measurement. An eddy current displacement meter-based system has been used as a comparison measurement. Experimental results of dynamic strain measurement have proved that the FBG sensing system has a good performance in the measurement of dynamic strain. The results of static and dynamic strain measurement indicate that the sensing system using two wavelength-matched FBG sensors is superior to the single FBG sensor system.     

Fiber grating sensors for high-temperature measurement

Two fiber grating sensors for high-temperature measurements are proposed and experimentally demonstrated. The interrogation technologies of the sensor systems are all simple, low cost but effective. In the first sensor system, the sensor head is comprised of one fiber Bragg grating (FBG) and two metal rods. The lengths of the rods are different from each other. The coefficients of thermal expansion of the rods are also different from each other. The FBG will be strained by the sensor head when the temperature to be measured changes. The temperature is measured based on the wavelength-shifts of the FBG induced by the strain. In the second sensor system, a long-period fiber grating (LPG) is used as the high-temperature sensor head. The LPG is very-high-temperature stable CO₂-laser-induced grating and has a linear function of wavelength–temperature in the range of 0–800 °C. A dynamic range of 0–800 °C and a resolution of 1 °C have been obtained by either the first or the second sensor system. The experimental results agree with theoretical analyses.     

Intensity curvature sensor based on photonic crystal fiber with three coupled cores

An intensity curvature sensor using a Photonic Crystal Fiber (PCF) with three coupled cores is proposed. The three cores were aligned and there was an air hole between each two consecutive cores. The fiber had a low air filling fraction, which means that the cores remain coupled in the wavelength region studied. Due to this coupling, interference is obtained in the fiber output even if just a single core is illuminated. A configuration using reflection interrogation, which used a section fiber with 0.13 m as the sensing head, was characterized for curvature sensing. When the fiber is bended along the plane of the cores, one of the lateral cores will be stretched and the other compressed. This changes the coupling coefficient between the three cores, changing the output optical power intensity. The sensitivity of the sensing head was strongly dependent on the direction of bending, having its maximum when the bending direction was along the plane of the cores. A maximum curvature sensitivity of 2.0 dB/m⁻¹ was demonstrated between 0 m and 2.8 m.     

Torsion sensing with a fiber ring laser incorporating a pair of rotary long-period fiber gratings

We experimentally demonstrate a fiber ring laser for high-resolution torsion measurement, where the laser cavity consists of a Mach-Zehnder interferometer formed with a pair of long-period fiber gratings written in a twisted single-mode fiber by a CO₂ laser. The emitting wavelength of the laser provides a measure of the rate of the torsion applied to the grating pair, while the direction of the wavelength shift indicates the sense of the applied torsion. The narrow linewidth and the large side-mode suppression ratio of the laser can provide a much more precise measurement of torsion, compared with passive fiber-optic torsion sensors. The torsion sensitivity achieved is 0.084 nm/(rad/m) in the torsion range ± 100 rad/m, which corresponds to a torsion resolution of 0.12 rad/m, assuming a wavelength resolution of 10 pm for a typical optical spectrum analyzer. The ultimate resolution of the sensor is limited by the linewidth of the laser and could be an order of magnitude higher.     

Highly sensitive bend sensor with hybrid long-period and tilted fiber Bragg grating

We demonstrate a new type of fiber optic bend sensor with a hybrid structure made up of a long period grating (LPG) and a tilted fiber Bragg grating (TFBG). The sensing mechanism is based on the spectrum of power transfers between the core and cladding modes from a TFBG located downstream from a LPG. We show that the curvature of a beam can be determined by the reflected power difference between the core mode and the recoupled cladding modes. We further provide design rules for the LPG and TFBG to optimize and linearize the sensor response. In addition, the temperature cross-sensitivities of this configuration are also investigated for two different types of fiber.     

Polarization maintaining index-guided photonic crystal fiber sensor for slowly varying pressure measurement

The paper presents an experimental investigation of slowly varying pressure measurement using the polarization maintaining photonic crystal fiber (PCF) sensor. Versatility of the sensor has been proved by analyzing its response for various types of time varying pressure profiles viz. exponentially decaying, sinusoidally varying and linearly increasing pressure. Temporal behavior of the sensor has been fully characterised. Dependence on temperature has been explored and it is found that the sensor is an attractive choice for applications in harsh environments.     

Room temperature multiwavelength erbium-doped fiber ring laser using a highly nonlinear photonic crystal fiber

A multiwavelength laser source is demonstrated with a high power erbium-doped fiber amplifier as the gain medium. A highly nonlinear photonic crystal fiber (PCF) is inserted in the ring cavity to provide nonlinear gain by four-wave mixing. A Sagnac loop is incorporated in the ring cavity serving as a comb-like multichannel filter. The comparison between fiber ring laser without PCF and with PCF shows that the highly nonlinear PCF can generate a larger number of excited wavelengths and help stabilize the output power.     

Fiber torsion sensor demodulated by a high-birefringence fiber Bragg grating

A new high-birefringence (Hi-Bi) fiber torsion sensor demodulated by a Hi-Bi fiber Bragg grating (FBG) is proposed in this study. The twisted Hi-Bi fiber sensor characteristics are analyzed using the Jones matrix. The intensity ratio from two reflected Bragg wavelengths is associated with the twist angle of the measured Hi-Bi fiber. It is found that the twist angle resolution is estimated at around 0.3° under ±0.1 dB readout from an optical spectrum analyzer if the polarization state of the light source is stable. The advantages of this new torsion sensor are: (1) insensitivity to intensity variations from the light source, (2) insensitivity to the torsion gauge length, and (3) absolute measurement in the twist angle. However, the polarization state of light in the proposed method needs to be controlled, and any birefringence change in the twisted Hi-Bi fiber needs to be prevented.     

光纤布拉格光栅激光器的传感应用

光纤激光器是一种光束质量好、信噪比高的光源。合理利用光纤激光器中布拉格光栅的传感特点能够制作出性能优良的高灵敏度传感器。光纤激光式传感器按结构基本可分为分布布拉格反射式光纤激光器以及分布反馈式光纤激光器两种。对这两类传感器进行介绍并对这些传感器的优缺点进行分析,最后展望其应用前景。     

Erbium-doped fiber ring laser sensor for high temperature measurements based on a regenerated fiber Bragg grating

This article presents an erbium-doped fiber ring laser for high temperature measurement with high accuracy. The proposed laser sensor employs a regenerated fiber Bragg grating (RFBG) as a sensor element. Through thermal treatments, the RFBG with enhanced thermal resistance was obtained. The laser emission optical spectrum presents good performance with a high optical signal-to-noise ratio of 58dB. Experimental results demonstrate a wavelength sensitivity to the temperature is 15.5 pm/ºC with the temperature range from 300ºC to 900ºC, and the correlation coefficient is 0.999. The results prove it is able to provide potential applications in high temperature measurement.