Sapphire (0 0 0 1) surface modifications induced by long-pulse 1054 nm laser irradiation

We have investigated modifications of sapphire (0 0 0 1) surface with and without coating, induced by a single laser pulse with a 1054 nm wavelength, 2.2 s duration, 7.75 mm spot and energy of 20-110 J. A holographic optical element was used for smoothing the drive beam spatially, but it induced small hotspots which initiated damage on the uncoated and coated surfaces. The individual damage effects of hotspots became less pronounced at high fluences. Due to high temperature and elevated non-hydrostatic stresses upon laser irradiation, damage occurred as fracture, spallation, basal and rhombohedral twinning, melting, vitrification, the formation of nanocrystalline phases, and solid-solid phase transition. The extent of damage increased with laser fluences. The formation of regular linear patterns with three-fold symmetry ( directions) upon fracture was due to rhombohedral twinning. Nanocrystalline -Al₂O₃ formed possibly from vapor deposition on the coated surface and manifested linear, triangular and spiral growth patterns. Glass and minor amounts of -Al₂O₃ also formed from rapid quenching of the melt on this side. The - to -Al₂O₃ transition was observed on the uncoated surface in some partially spalled alumina, presumably caused by shearing. The nominal threshold for laser-induced damage is about 47 J cm⁻² for these laser pulses, and it is about 94 J cm⁻² at the hotspots.     

Methane diode laser overtone spectroscopy at 840 nm

Overtone absorption lines of ¹²CH₄ have been examined by using a tunable diode laser (TDL) spectrometer in the region around (840 nm) where the combination overtone band ν₁+3ν₃ lies. The spectrometer sources are commercially available heterostructure GaAlAs TDLs operating in the “free-running” mode, which allowed the detection of the line positions within . The wavelength modulation spectroscopy (WMS) and the second harmonic detection technique permitted the measurements of minimum absorbances of the order of ?5×10^-6. This allowed to observe the weakest lines of the band with absorption cross-sections of the order of ?2×10^-25 cm²/molecule or /amagat. For some of them self-, air-, He- and H₂-broadening coefficients have been obtained at room temperature.     

GaN/LiNbO3 (0 0 0 1) interface formation calculated from first-principles

The stable adsorption sites for both Ga and N ions on the ideal and on the reconstructed LiNbO₃ (0 0 0 1) surface are determined by means of first-principle total energy calculations. A single N layer is found to be more strongly bound to the substrate than a single Ga layer. The adsorption of a GaN monolayer on the polar substrate within different orientations is then modeled. On the basis of our results, we propose a microscopic model for the GaN/LiNbO₃ interface. The GaN and LiNbO₃ (0 0 0 1) planes are parallel, but rotated by 30° each other, with in-plane epitaxial relationship [1 0 0]_GaN‖ [1 1  0]_LiNbO3. In this way the (0 0 0 1) plane lattice mismatch between GaN and LiNbO₃ is minimal and equal to 6.9% of the GaN lattice constant. The adsorbed GaN and the underlying LiNbO₃ substrate have parallel c-axes.     

Fourier transform emission spectroscopy of CoCl in the 500 nm region

Fourier transform emission spectra of CoCl were obtained with a tube furnace-DC discharge source in the 450-500 nm spectral region. In addition to observing two different band systems, which were assigned as [20.7] and [21.3] by Adam et al. [J. Mol. Spectrosc. 212 (2002) 111], we obtained data for additional sub-bands and vibrational levels. In contrast to the previous work, intense Q branches are seen in the [21.3]- bands which indicate that these bands are likely ΔΛ≠0 transitions. The equilibrium rotational constant B_e for the ground state is 0.1801104(28) cm⁻¹, the equilibrium bond length is 2.065122(16) Å and ΔG_1/2 is 430.418(5) cm⁻¹.     

Diode laser spectroscopy of ammonia at 760 nm

A tunable diode laser spectrometer has been employed to examine the unknown overtone absorption lines of NH₃ around (760 nm). The spectrometer sources are commercially available heterostructure AlGaAs tunable diode lasers operating in the “free-running” mode. The detection of the lines has been possible by the use of the wavelength modulation spectroscopy and the second harmonic detection technique. A special algorithm has been used in order to fit the highly modulated absorption lines. The weakest observed resonances have absorption cross sections on the order of ?/molecule or ?/amagat. For some of the more intense lines self-, air-, N₂-, He- and H₂-broadening coefficients have been obtained at room temperature and also some shifting coefficients have been measured.     

Aromatic interactions in the close packing of phenyl-imides at Cu(1 1 0) surfaces

The oxidation of aniline at Cu(1 1 0) surfaces at 290 K has been studied by XPS and STM. A single chemisorbed product, assigned to a phenyl imide (C₆H₅N(a)), is formed together with water which desorbs. Reaction with preadsorbed oxygen results in a maximum surface concentration of phenyl imide of 2.8 × 10¹⁴ mol cm⁻² and a surface dominated by domains of three structures described by , and unit meshes. However, concentrations of phenyl imide of up to 3.3 × 10¹⁴ mol cm⁻² were obtained from the coadsorption of aniline and dioxygen (300:1 mixture) resulting in a highly ordered biphasic structure with and domains. Comparison of the STM and XPS data shows that only half the phenyl imides at the surface are imaged. Pi-stacking of the phenyl rings is proposed to account for this observation.     

Electron-phonon interaction in magnesium: From the monolayer to the Mg(0 0 0 1) surface

We report ab initio study of the electron-phonon coupling in a free standing magnesium monolayer and at the Mg(0 0 0 1) surface. The calculations were carried out using a linear-response approach in the plane-wave pseudopotential representation. Eliashberg spectral function α²F(ω) averaged over electron states at the Fermi surface is presented for the monolayer while for the Mg(0 0 0 1) surface, we compute the electron-phonon spectral function α²F_k,i(ω) for surface states at the and points.     

Rotational levels of the (0 0 0) and (0 1 0) states of D2O from hot emission spectra in the 320-860 cm region

The far-infrared emission spectra of deuterated water vapour were measured at different temperatures (1370, 1520, and 1950 K) in the range 320-860 cm⁻¹ at a resolution of 0.0055 cm⁻¹. The measurements were performed in an alumina cell with an effective length of hot gas of about 50 cm. More than 1150 new measured lines for the D₂¹⁶O molecule corresponding to transitions between highly excited rotational levels of the (0 0 0) and (0 1 0) vibrational states are reported. These new lines correspond to rotational states with higher values of the rotational quantum numbers compared to previously published determinations: J_max=26 and for the (0 0 0) ← (0 0 0) band, J_max=25 and for the (0 1 0) ← (0 1 0) band, and J_max=26 and for the (0 1 0) ← (0 0 0) band. The estimated accuracy of the measured line positions is 0.0005 cm⁻¹. To our knowledge no experimentally measured rotational transitions for D₂¹⁶O within an excited vibrational state have been available in the literature so far. An extended set of experimental rotational energy levels for (0 0 0) and (0 1 0) vibration states including all previously available data has been determined. For the data reduction we used the generating function model. The root mean square (RMS) deviation between observed and calculated values is 0.0012 cm⁻¹ for 692 rotational levels of the (0 0 0) state and 0.0010 cm⁻¹ for 639 rotational levels of the (0 1 0) vibrational state. A comparison of the observed energy levels with the best available values from the literature and with the global predictions from molecular electronic potential energy surface [J. Chem. Phys. 106 (1997) 4618] for the (0 0 0) and (0 1 0) states is discussed.     

CO oxidation on Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces studied by infrared chemiluminescence spectroscopy

The infrared (IR) chemiluminescence studies of CO₂ formed during steady-state CO oxidation over Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces were carried out. Analysis of their emission spectra indicates that the order of the average vibrational temperature () values of CO₂ formed during CO oxidation was as follows: Pd(1 1 1) > Pt(1 1 1) > Rh(1 1 1), and the order is coincident with the potential energy in the transition state expected by the theoretical calculations. Furthermore, it is suggested that the bending vibrational temperature () can also be influenced by the angle of O-C-O (∠_OCO) of the activated complex in the transition state, which has also been proposed by the theoretical calculations.     

Laser excitation spectrum of C3 in the region 26 000-30 700 cm

The vibrational structure of the electronic state of C₃ in the region 26 000-30 775 cm⁻¹ has been re-examined, using laser excitation spectra of jet-cooled molecules. Rotational constants and vibrational energies have been determined for over 60 previously-unreported vibronic levels; a number of other levels have been re-assigned. The vibrational structure is complicated by interactions between levels of the upper and lower Born-Oppenheimer components of the state, and by the effects of the double minimum potential in the Q₃ coordinate, recognized by Izuha and Yamanouchi [16]. The present work shows that there is also strong anharmonic resonance between the overtones of the ν₁ and ν₃ vibrations. For instance, the levels 2 1⁺ 1 and 0 1 ⁺ 3 are nearly degenerate in zero order, but as a result of the resonance they give rise to two levels 139 cm⁻¹ apart, centered about the expected position of the 2 1⁺ 1 level. With these irregularities recognized, every observed vibrational level up to 30 000 cm⁻¹ (a vibrational energy of over 5000 cm⁻¹) can now be assigned. A vibronic level at 30181.4 cm⁻¹, which has a much lower B′ rotational constant than nearby levels of the state, possibly represents the onset of vibronic perturbations by the electronic state; this state is so far unknown, but is predicted by the ab initio calculations of Ahmed et al. [36].     

Diode laser spectroscopy of ethylene overtones at 830 nm

A tunable diode laser spectrometer has been employed to examine the 3rd overtone absorption lines of C₂H₄ at around 12 000 cm⁻¹ (830 nm). The spectrometer sources are heterostructure AlGaAs tunable diode lasers operating “free-running”. By the aid of the wavelength modulation spectroscopy with the second harmonic detection technique and a Herriott type multipass cell 63 very weak absorption lines have been observed for the first time, with cross sections as low as 2 × 10⁻²⁶ cm²/mol, equivalent to . The self-broadening coefficient has been measured for one of the most intense lines.     

Segregation of Sn and Sb in a ternary Cu(1 0 0)SnSb alloy

Surface segregation studies of Sn and Sb in Cu(1 0 0)-0.14 at.% Sn-0.12 at.% Sb ternary alloy, have been done by making use of Auger Electron Spectroscopy. The method of Linear Temperature Ramp (LTR) was employed, whereby the sample was heated and cooled linearly at a constant rate. The positive heating rate showed both a kinetic segregation profile, as well as a narrow equilibrium segregation region, at higher temperatures. The equilibrium segregation profile was extended by cooling the sample. Sn was first to segregate to the surface due to its higher diffusion coefficient, mainly from a smaller activation energy E_Sn. Sb, due to its higher segregation energy, eventually replaced Sn from the surface. The modified Darken model was used to simulate the profile yielding the following segregation parameters: D_o(Sn) = 6.3 × 10⁻⁶ m²/s, D_o(Sb) = 2.8 × 10⁻⁵ m²/s; E_Sn = 175.4 kJ/mol, E_Sb = 186.3 kJ/mol; , ; Ω_Cu-Sn = 3.4 kJ/mol, Ω_Cu-Sb = 15.9 kJ/mol and Ω_Sn-Sb = −5.4 kJ/mol.     

X-ray initiated molecular photochemistry of Cl-containing adsorbates on a Si(1 0 0) surface using synchrotron radiation

X-ray initiated molecular photochemistry for SiCl₄ and CCl₄ adsorbed on Si(1 0 0) at ∼90 K following Cl 2p core-level excitation is investigated by photon stimulated ion desorption and ion kinetic energy distribution measurements. The Cl excitation of solid SiCl₄ induces the significant enhancement (∼900%) of the Cl⁺ yield, while the Cl excitation of condensed CCl₄ leads to a moderate enhancement (∼500%) of the Cl⁺ yield. The enhancement of Cl⁺ yield at the specific core-excited states is strongly correlated to the ion escaped energy. Upon X-ray exposure for CCl₄ adsorbed on Si(1 0 0) (20-L exposure), the Cl⁺ yields at resonances decrease and new structures at higher photon energies are observed. Cl⁺ yields at these new resonances are significantly enhanced compared to those at other resonances. These changes are the results of desorption and surface reaction of the CCl₄-Si surface complex due to X-ray irradiation. We have demonstrated that state-specific enhancement of ion desorption can be successfully applied to characterize the reaction dynamics of adsorbates adsorbed on surfaces by X-ray irradiation.     

Diode laser spectroscopy of CO2 at 790 nm

Absorption lines of ¹²C¹⁶O₂ have been examined by using a tunable diode laser spectrometer in the region around (790 nm). The spectrometer sources are commercially available double heterostructure InGaAlAs tunable diode lasers (TDLs) operating in the “free-running” mode, which allowed the detection of the line positions within . The observed carbon dioxide absorption lines belong to the combination overtone 2ν₂+5ν₃ ro-vibrational band with intensities ranging around .     

Adsorption structure of germanium on the Ru(0 0 0 1) surface

Coverage-dependent adsorption energy of the Ge/Ru(0 0 0 1) growth system and the geometrical distortions of the most stable adsorption structure are investigated through first-principles calculations within density functional theory. A local minimum in adsorption energy is found to be at a Ge coverage of 1/7 monolayer with a Ru(0 0 0 1)- symmetry. Based on this stale superstructure, the scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) images are simulated by means of surface local-density of states (LDOS). The results are consistent well with the STM measurements on the phase for Ge overlayer on Ru(0 0 0 1). From this stimulation, the relations between the STM images and the lattice distortion are also clarified.     

Absorption spectra of AsH2 radical in 435-510 nm by cavity ringdown spectroscopy

The absorption spectra of jet-cooled AsH₂ radicals were recorded in the wavelength range of 435-510 nm by cavity ringdown spectroscopy. The AsH₂ radicals were produced by pulsed DC discharge in a molecular beam of a mixture of AsH₃, SF₆, and argon. Seven vibronic bands with fine rotational structures have been identified and assigned as the , , and (n = 1-3) bands of the electronic transition. Based on the previous studies of AsH₂ radical, rotational assignments and rotational term values for each band were obtained, and the molecular parameters including vibrational constants, rotational constants, centrifugal distortion constants, and spin-rotation interaction constants were also determined.     

Rotational and vibrational structure in the 288 nm band system of the FeCl2 radical

The laser excitation spectrum of the 288 nm band system of FeCl₂, formed in a free-jet expansion, has been recorded at a rotational temperature of approximately 10 K. Vibronic transitions are observed from the ground state to two close-lying excited electronic states that differ in inversion (g, u) parity. Two extensive progressions in the symmetric stretching vibration have been identified, referred to as Progressions A and B. The main features of Progression A, which is based on the band, are allowed transitions to the excited electronic state of ungerade symmetry. Progression B is built on the band and consists of vibronically induced transitions to the gerade excited state. A substantial decrease in the symmetric stretching vibrational wavenumber is observed on excitation . Local perturbations are found to cause relative shifts between the different isotopomers. Several vibronic bands have been recorded and analysed at rotational resolution for the three isotopomers Fe³⁵Cl₂, Fe³⁵Cl³⁷Cl, and Fe³⁷Cl₂ in natural abundance. All bands show perpendicular rotational structure of a linear molecule, and have been unambiguously assigned to a Ω = 5-4 transition, consistent with the inverted ⁵Δ_g ground state predicted by ab initio and DFT calculations. The zero-point averaged FeCl bond length is determined to be in the upper and lower electronic states. The results show that the molecule is linear in both states.     

One-dimensional defects in iodine adlayers on Pt(1 0 0)

One-dimensional defect structures of closed-packed adlayers of iodine on Pt(1 0 0) were studied with scanning tunneling microscopy (STM). On the terraces of the Pt(1 0 0) surface we observed rotational domains with line defects running in [0 1 0] directions, in coexistence with nearly defect-free domains. In addition to these prevailing line defects (A-defects) with a local coverage lower than that of a defect-free surface, we report on much less frequently observed line defects with higher local coverages (B- and C-defects). The strong dependence of the concentration of these defects on the adsorption temperature is governed by the decrease of the overall iodine coverage with increasing temperature. Iodine adsorption at ∼1100 K leads to self-organization of A-defects in quasi-periodic arrangements. The relevance of these defects as important structural elements of commensurate superstructures of iodine on Pt(1 0 0) is stressed.