Simulation of DWDM signals using optimum span scheme with cascaded optimized semiconductor optical amplifiers

We numerically simulated the ten channels at 10 Gb/s dense wavelength division multiplexing (DWDM) transmission faithfully over 17,227 km using 70 km span of single mode fiber (SMF) and dispersion compensating fiber (DCF) using optimum span scheme at channel spacing 20 GHz. For this purpose, inline optimized semiconductor optical amplifiers (SOAs) and DPSK format are used. We optimized the SOA parameters for inline amplifier with minimum crosstalk and amplified spontaneous emission noise with sufficient gain at bias current 400 mA. For this bias current, constant gain 36.5 dB is obtained up to saturation power 21.35 mW. We have also optimized the optical phase modulator bandwidth for 400 mA current which is around 5.5 GHz with crosstalk −14.2 dB between two channels at spacing 20 GHz.We show the 10×10 Gb/s transmission over 70 km distance with inline amplifier has good signal power received as compared to without amplifier, even at equal quality factor. We further investigated the optimum span scheme for 5670 km transmission distance for 10×10 Gb/s with channel spacing 20 at 5.5 GHz optical phase modulator bandwidth. As we increase the transmission distance up to 17,227 km, there is increase in power penalty with reasonable quality.The impact of optical power received and Q factor at 5670 and 17,227 km transmission distance for different span schemes for all channels has been illustrated. For launched optical power less than saturation, all channels are obtained at bit error rate floor of 10⁻¹⁰.     

Transmission performance of 20 × 10 Gb/s WDM signals using cascaded optimized SOAs with OOK and DPSK modulation formats

We investigated 20 channels at 10 Gb/s wavelength division multiplexing (WDM) transmission over 1190 km single mode fiber and dispersion compensating fiber using cascaded inline semiconductor optical amplifier at a span of 70 km for RZ-DPSK (return zero differential phase-shift keying) modulation format by using same channel spacing, i.e. 100 GHz. We show for RZ-OOK (return zero on-off keying) format a transmission distance of up to 1050 km with Q factor more than 15 dB, without any power drops. We developed the SOA model for inline amplifier having minimum cross-talks and ASE (amplified spontaneous emission) noise power with sufficient gain. At optimal bias current of 400 mA, a high constant gain of 36.5 dB is obtained up to a saturation power of 21.36 mW. So reduction of cross-talk and distortion is possible by decreasing the bias current at appropriate amplification factor.The DPSK modulation format has less cross-talk as compared to OOK format for nonlinearities and saturation case. The impact of optical power received and Q factor at different distance for both RZ-OOK and RZ-DPSK modulation format has been illustrated. We have shown the optical spectrum and clear Eye diagram at the transmission distance of 1190 km in RZ-DPSK system and 1050 km in RZ-OOK systems.The bit error rate (BER) for all channels observed is less than 10⁻¹⁰ up to gain saturation for both DPSK and OOK systems. Finally, we investigated that the transmission distance decreases with a decrease in channel spacing of up to 20 GHz.     

An approach to enhance the receiver sensitivity with SOA for optical communication systems

In this paper, we investigate an SOA (semiconductor optical amplifier) preamplifier structure by optimizing the carrier lifetime in order to reduce the amplified spontaneous emission (ASE) noise and crosstalk, with adequate gain increase. This proposed SOA optical preamplifier has no need of optical alignment and antireflection coating. This structure of SOA eliminates the need of optical filter, and exhibits large tolerance to the input light wavelength. The receiver sensitivity is investigated for single and multi channel transmission links. The received power of − 50.34 dBm is observed at bit error rate (BER) 10^− 12 for 10 Gb/s with PIN receiver. Further, the impact of gain, amplified spontaneous emission power and gain variation for different carrier lifetime with input power for OOK system is illustrated. The proposed SOA has constant gain of 30.06 dB up to gain saturation for carrier lifetime 0.18 ns. It is predicted that low value of carrier lifetime suffers less from ASE noise.     

Minimization of Cross-Gain Saturation in Wavelength Division Multiplexing by Optimizing Differential Gain in Semiconductor Optical Amplifiers

We successfully simulated the 10 × 40 Gbit/s soliton RZ-DPSK WDM signals over 1050 km with spectral efficiency approaching 0.4 bit/s/Hz using semiconductor optical amplifiers (SOAs) as in-line amplifier. The cross-gain saturation of SOA can be minimized by settling crosstalk at a lower level by decreasing the differential gain. This decrease in differential gain is in such a way that we get nil power penalty. The maximum transmission distance of 1050 km is possible with differential gain 210 atto cm² of SOA.

The impact of amplification factor, ASE noise power, crosstalk, quality factor and bit error rate for different differential gain has been investigated. It has been shown that with the increase in differential gain of SOA, the transmission distance goes on decreasing. At high value of differential gain 2.5 × 10^-16 cm² for the transmission distance 1050 km, all channels produce inter channel crosstalk with bit error rate greater than 10^-6. But for lower differential gain 190 atto cm², the quality of all channel increases at the cost of large power penalty.

With slight increase in differential gain 200 atto cm², the maximum transmission distance observed is 4550 km with quality of received signal more than 15 dB and having nil power penalty. We observed clear eye diagrams and optical power spectra for received signal with transmission distance 1050 km and 4550 km using soliton RZ-DPSK system. The bit error rate for all channels increase more than 10^-10 with the increase in launched input power that is due to power saturation.     

Boost up of four wave mixing signal in semiconductor optical amplifier for 40 Gb/s optical frequency conversion

The 40 Gb/s optical frequency converter for non-return to zero differential phase shift keying (NRZ-DPSK) signal by using four wave mixing in semiconductor optical amplifier (SOA) have achieved sucessfully. The optimized signal-to-pump ratio for NRZ-DPSK by using optimized SOA structure with enhanced FWM effect is also evaluated. The optimum signal-to-pump ratio is 12 dB and 10 dB with Q factor penalty of 0.685 dB and 0.663 dB. The dependence of four wave mixing efficiency and converted signal power on signal input power is studied and it is evaluated that four wave mixing efficiency decreases with increase in the input power. The impact of pump power, signal-to-pump ratio, and SOA parameters with Q factor penalty for 40 Gb/s has been illustrated. It has shown that converted signal power increases up to the saturation power of semiconductor optical amplifier, then decreases. It is observed that for the optimum pump power, OSNR of converted signal varies little with signal input power.     

Reduction of the fiber nonlinearity impairment using optical phase conjugation in 40 Gb/s CO-OFDM systems

In this paper, optical phase conjugation (OPC) located in the transmitter based on four wave mixing (FWM) in a semiconductor optical amplifier (SOA) is first simulated in 40 Gb/s CO-OFDM systems, and the fiber nonlinearity impairment of the transmission link is precompensated before OPC by transmission through a fiber with large nonlinearity coefficient. Simulation results show that the nonlinear threshold (NLT) can be increased by about > 3 dB and maximum Q factor can be increased by about 2 dB for the single-channel system. For 50-GHz-Spacing WDM systems, the maximum Q and NLT are increased by about 1 dB, even in the presence of cross phase modulation (XPM) from neighbouring WDM channels. It is found that this OPC subsystem located in the transmitter, not necessary to be inserted into the middle of link, can mitigate the fiber nonlinearity impairment for both single-channel and WDM systems.     

Power budget improvement for long-haul WDM transmission with optimum placement of SOAs

Sufficient power margin is investigated for ten-channels WDM transmission over 68,908 km by using cascaded in-line semiconductor optical amplifier for the differential phase-shift keying (DPSK) modulation format for the first time. For this, we used the structural optimization and placement scheme of semiconductor optical amplifiers (SOAs) for long-haul WDM transmission. The SOA model for in-line amplifier has low crosstalk, ASE noise power and low noise figure with sufficient gain. The impact of noise figure, amplification factor, ASE noise power, optical gain and crosstalk with signal input power for the SOA model has been illustrated, which shows that 400 mA is the optimum bias current.

We observed that the optimized optical filter bandwidth for the 100 GHz channel spacing is 0.4 nm. We observe that as we decrease the channel spacing, the quality of signal is degraded. We show that the optimum span scheme-1 is used up to a transmission distance of 68,908 km with good quality for power margin more than 24 dB. This placement scheme of SOAs shows good power budget for long transmission distance. We show the optical spectrum and clear eye diagram at the transmission distance of 68,908 km for optimum span schemes. Finally, we investigate the maximum transmission distance with decrease in channel spacing, i.e., 20 and 50 GHz.     

Simulation on semiconductor optical amplifier intensity noise reduction for future spectrum-sliced optical networks

Spectrum-slicing techniques employing incoherent light are an economic, practical and therefore attractive solution for future all-optical networks, especially for wavelength-division multiplexing (WDM) transmission systems in local area networks (LAN). However, spectrum-sliced methods exhibit a large excess intensity noise factor that limits the performance of the system. In this paper, we investigate noise suppression of spectrum-sliced incoherent light using a saturated semiconductor optical amplifier (SOA). The system incorporating the noise reducing SOA is modeled and simulated using OptSim software, and the results are compared to practical schemes from the literature. Performance comparisons are made with two different broadband sources test-beds. The characteristics of the SOA gain saturation are also presented. In both cases, it is found that a high degree of intensity noise is suppressed by the use of the non-linear gain saturation characteristics of the SOA so as to achieve better system performance. The position of a modulator in the system is also investigated in order to greatly reduce the excess intensity noise.     

Simulation and evaluation of phase noise for optical amplification using semiconductor optical amplifiers in DPSK applications

A thorough simulation and evaluation of phase noise for optical amplification using semiconductor optical amplifier (SOA) is very important for predicting its performance in differential phase-shift keyed (DPSK) applications. In this paper, standard deviation and probability distribution of differential phase noise at the SOA output are obtained from the statistics of simulated differential phase noise. By using a full-wave model of SOA, the noise performance in the entire operation range can be investigated. It is shown that nonlinear phase noise substantially contributes to the total phase noise in case of a noisy signal amplified by a saturated SOA and the nonlinear contribution is larger with shorter SOA carrier lifetime. It is also shown that Gaussian distribution can be useful as a good approximation of the total differential phase noise statistics in the whole operation range. Power penalty due to differential phase noise is evaluated using a semi-analytical probability density function (PDF) of receiver noise. Obvious increase of power penalty at high signal input powers can be found for low input OSNR, which is due to both the large nonlinear differential phase noise and the dependence of BER vs. receiving power curvature on differential phase noise standard deviation.     

All optical logic NAND gate based on two-photon absorption in semiconductor optical amplifiers

We propose a new scheme to realize all optical logic NAND operating at high speeds up to 250 Gb/s utilizing the ultrafast phase response during two-photon absorption (TPA) process in semiconductor optical amplifiers (SOA). NAND gate is important because other Boolean logic elements and circuits can be realized using NAND gates as basic building blocks. Rate equations for semiconductor optical amplifiers (for input data signals with high intensity) configured in the form of a Mach-Zehnder interferometer have been solved. The input intensities are high enough so that the two-photon induced phase change is larger than the regular gain induced phase change. The performance of this scheme is analyzed by calculating the quality factor of the resulting data streams. The results show that both AND and NAND operations at 250 Gb/s with good signal to noise ratio are feasible.     

Tunable 12×10 GHz mode-locked semiconductor fiber laser incorporating a Mach-Zehnder interferometer filter

A stable multiwavelength mode-locked semiconductor fiber ring laser incorporating a fiber Mach-Zehnder interferometer (MZI) filter was proposed and experimentally demonstrated. A semiconductor optical amplifier (SOA) serves as an optically controlled mode-locking element due to gain exhaustion caused by external injected optical pulses. Another SOA severs as a constant-gain medium. A fiber MZI filter with a temperature control is incorporated into the fiber ring cavity to acquire a stable and tunable multiwavelength oscillation. Twelve wavelengths are synchronously mode-locked at 10 GHz, pulse width of mode-locked pulse are about 30 ps. Proposed multiwavelength mode-locked semiconductor fiber ring laser has some distinct advantages, such as simple and compact structure, easy integration, convenient tuning, good stability, potential high repetition rate operating, which has potential application in the future WDM communication system.     

All-optical NRZ-OOK-to-RZ-OOK format conversions with tunable duty cycles using nonlinear polarization rotation of a semiconductor optical amplifier

We experimentally demonstrate an all-optical 10 Gb/s format conversion from non-return-to-zero (NRZ) on-off-keying (OOK) to return-to-zero (RZ)-OOK with tunable duty cycle in the whole C-band using nonlinear polarization rotation (NPR) arising in an semiconductor optical amplifier (SOA). The experimental results show that, by tuning the polarizer at the SOA output, an RZ signal with tunable duty cycle from 33% to 66% could be obtained with an extinction ratio(ER) over 10 dB. In addition, we show that the NRZ-to-RZ conversion with duty cycle of 33-66% can be obtained with less than 1 dB power penalty at the bit error ratio (BER) of 10⁻⁹. The device can facilitate the cross-connection between optical transmission networks employing different modulation formats.     

All optical SR and D flip-flop employing XGM effect in semiconductor optical amplifiers

This paper presents a simple and novel scheme for all-optical SR and D flip-flop employing cross gain modulation (XGM) effect in two wideband semiconductor optical amplifiers. The proposed flip-flop has a fast response, with less than 20 ps transition times for both rising and falling edges. The FF speed-limit is mainly determined by the SOA recovery time and the intra-FF coupling length. The simulation results exhibit a contrast ratio of 13 dB between two states with an AM of less than 2.5 dB.The distinctive simplicity of the flip-flop implies reduced footprint and low power consumption which makes it ideal for photonic integration.     

Wide-Band Optical Wavelength Converter Based on Four-Wave Mixing Using Optimized Semiconductor Optical Amplifier

We have simulated 50 nm up and down wavelength conversion for a non-return to zero differential phase shift keying (NRZ-DPSK) signal using four-wave mixing in an optimized semiconductor optical amplifier (SOA) at 10 Gb/s for the first time. For this we optimized the SOA parameters to achieve sufficient quality and enhancement in four-wave mixing effect. This can be done in such a manner that the SOA never saturates and produces maximum four-wave mixing signals with minimum gain fluctuations. The quality of the converted signal is best before the saturation of SOA. Finally, we have numerically simulated cascaded wavelength converters up to 1300 km transmission distance.     

Wide-Band Optical Wavelength Converter Based on Four-Wave Mixing Using Optimized Semiconductor Optical Amplifier

We have simulated 50 nm up and down wavelength conversion for a non-return to zero differential phase shift keying (NRZ-DPSK) signal using four-wave mixing in an optimized semiconductor optical amplifier (SOA) at 10 Gb/s for the first time. For this we optimized the SOA parameters to achieve sufficient quality and enhancement in four-wave mixing effect. This can be done in such a manner that the SOA never saturates and produces maximum four-wave mixing signals with minimum gain fluctuations. The quality of the converted signal is best before the saturation of SOA. Finally, we have numerically simulated cascaded wavelength converters up to 1300 km transmission distance.     

All-optical clock recovery of 20 Gbit/s NRZ-DPSK signals using polarization-maintaining fiber loop mirror filter and semiconductor optical amplifier fiber ring laser

All-optical clock recovery (CR) from 20 Gbit/s nonreturn-to-zero differential phase-shift-keying (NRZ-DPSK) signals are demonstrated experimentally by using a polarization-maintaining fiber loop mirror filter (PMF-LMF) and a semiconductor optical amplifier (SOA) fiber ring laser. Only by adjusting polarization controller (PC), NRZ-DPSK signals were conveniently and fast converted to pseudo return-to-zero (PRZ) signal via PMF-LMF. Then the PRZ signals are injected into the SOA fiber laser for CR. The recovered clock signals is with the extinction ratio (ER) of 10 dB and the root-mean-square (RMS) timing jitter of 750 fs in 2³¹ − 1 long pseudorandom binary sequence (PRBS) NRZ-DPSK signals measurement. Moreover, the broad wavelength tunability of recovered clock stemmed from the use of SOAs as modulator and the gain medium are shown too.     

Filter-free ultrawideband generation based on semiconductor optical amplifier nonlinearities

A filter-free scheme for ultrawideband (UWB) generation with single semiconductor optical amplifier (SOA) is proposed and demonstrated. A pair of polarity-reversed optical pulses is generated due to cross gain modulation (XGM) in the pump-probe scheme, whereas the amplified pump pulse becomes sharp at its leading edge such that the power peak is shifted forward. Hence, the combination of the pump and probe signals at the SOA output is quasi-monocycle shape. Our scheme is an improved scheme to avoid exploiting optical filters and time-delay devices. The generated UWB radio frequency spectrum shows good stability when the input probe power varies from −10 dBm to 6 dBm, the probe wavelength varies in the whole C-band, and the bias current varies from 100 mA to 240 mA. Although the generated quasi-monocycle deviates from a standard Gauss monocycle to some extent, the frequency spectrum conforms to the UWB regulation. Two SOAs with different XGM dynamics are compared in generating UWB signals.     

A SOA-based all-optical regeneration of DPSK signals for satellite application

A semiconductor optical amplifier (SOA)-based regenerative amplification (SORA) of differential phase-shift keying (DPSK) signals for satellite application is presented, which has a simple frame and a large regenerative capacity to the small-power signals. The key mechanism of SORA is the discriminative gain provided by the SOA for the marks and spaces colliding in it. Simulation shows that, by using the SORA, the Q-factor improvement of degraded DPSK signals is about 0.7 dB, but it is significantly influenced by both optical confinement factor and gain relaxation time. Considering the satellite vibration, the bit error rate (BER) for the case of SORA can improve more than one order of magnitude compared with the case of no SORA.     

Experimental demonstration of polarization multiplexing for simultaneously providing broadband wireless and wired access

A fiber-based wavelength-division-multiplexing (WDM) network utilizing polarization multiplexing (PolMUX) is proposed to simultaneously provide broadband wireless and wired services. In such a dual-service access network, the wireless and wired services are separately delivered in two orthogonal states of polarization with well independence in a single WDM channel. The impact of several polarization-dependent interferences becomes insignificant due to the relatively short transmission distance in access networks. The feasibility of PolMUX is experimentally demonstrated with a power penalty at BER = 10^-9 of about 0.5 dB and 1 dB for 2.5 Gb/s wired and wireless downstream services, respectively. The proposed system is compatible with the current reported techniques in either WDM passive optical networks (WDM-PON) or radio-over-fiber (ROF) systems.     

All-optical phase and amplitude regeneration of return-to-zero differential phase shift keying data

We report a novel implementation of an all-optical rephasing, reshaping, and reamplification differential phase shift keying (DPSK) regenerator. The rephasing is based on converting phase noise into amplitude noise by using an interferometric configuration and then eliminating the amplitude noise by using a semiconductor optical amplifier (SOA). The reshaping is performed using gain competition and gain compression in a saturated SOA. The scheme was tested using 10Gbit/s, 2(23)-1 pseudorandom bit sequence return-to-zero DPSK data. The measurement shows removal of the degraded data error floor with a 6 order-of-magnitude improvement in bit-error rate. The measured negative power penalty is about 4dB. Mathematical analysis shows a reduction in DPSK phase-noise power by half.