Simultaneous determination of neodymium and erbium in rare earth mixture with 5,7-dibromo-8-hydroxyquinoline and TX-100 by third-derivative spectrophotometry

The absorption spectra of 4f electron transitions of the complexes of neodymium and erbium with 5,7-dibromo-8-hydroxyquinoline in the presence of octylphenol poly(ethyleneglycol)ether have been studied by normal and third-derivative spectrophotometry. The proposed method is free of interference of other rare earths. The calibration graphs were linear up to 18 g/ml of neodymium and 21 g/ml of erbium (in the final solution). The derivative molar absorptivities are 395 l.mol^–1.cm^–1 for neodymium and 3421.mol^–1.cm^–1 for erbium. The corresponding values of Sandell's sensitivity were 0.36 and 0.49 g.cm^–1, respectively. The relative standard deviations evaluated from ten independent determinations of 2.5 g/ml of neodymium and erbium are 1.5 and 3.8% for neodymium and 1.8 and 4.1% for erbium in absence and presence of 70 g of lanthanum, respectively. The detection limits (signal to noise ratio=2) are 0.23 g/ml for neodymium and 0.30 g/ml for erbium. The method has been used for the determination of neodymium and erbium in mixed rare earths with satisfactory results.     

Fourth-derivative spectrophotometric determination of neodymium in mixed rare earths with methyl thymol blue and cetylpyridinium chloride

A sensitive and selective method is described for the determination of neodymium in mixed rare earths using fourth-derivative spectrophotometry. The method is based on the absorption spectra of 4f electron transitions of the complex of neodymium with methyl thymol blue and cetylpyridinium chloride. The influence of various instrumental parameters and reaction conditions for maximum colour development are investigated. The calibration curve is linear over the range 0–3.5 g ml^–1 neodymium. The relative standard deviation for determination of 1.4 g ml^–1 neodymium (n = 7) is 1.6%. The detection limit (signal-to-noise ratio = 3) is 0.2 g ml^–1.     

Derivative spectrophotometric determination of holmium in rare earth mixtures with 2-(diphenylacetyl)indan-1,3-dione and octylphenyl poly(ethyleneglycol) ether

The zero-order and second-order derivative absorption spectra of the system of holmium with 2-(diphenylacetyl) indan-1, 3-dione and octylphenyl poly(ethyleneglycol) ether have been determined by derivative spectrophotometry. The molar absorptivity of absorption spectra and the derivative spectra are calculated respectively. The absorbances at the absorption maxima for the holmium complex are 48.5 (at 450 nm) and 14.5 (at 460 nm) times greater than for the corresponding chloride. The derivative spectra have been used to eliminate the interference of other lanthanides, and the sensitivity is again increased by a factor of about 5. The calibration graph is linear up to 25 g/ml of holmium. The detection limit, obtained from the sensitivity of the calibration graph and for 3S _b (S_b = standard deviation of a blank without holmium,n = 11), was 0.37 g/ml of holmium. The quantification limit (10S_b was 1.2 g/ml. The method has been applied successfully to synthetic and reference samples of rare earths.     

Simultaneous determination of manganese and zinc in mixtures using first- and second-derivative spectrophotometry

A new direct spectrophotometric determination of manganese with 5,8-dihydroxy-1,4-naphthoquinone (naphthazarin,NAZA) is reported. Absorption maximum, molar absorptivity and Sandell's sensitivity of 1:2 (M:L) complex are 695 nm, 1.88x10(4) l mol(-1) cm(-1) and 2.92 ng cm(-2), respectively. A linear calibration graph is obtained up to a concentration of 7.2 mug ml(-1) of manganese. The optimum range for determination (Ringbom) is between 0.20 and 6.8 mug ml(-1). A rapid method for simultaneous determination of manganese and zinc in their mixture using derivative spectra is described. The range 0.28-5.6 mug ml(-1) manganese could be determined in the presence of 0.33-6.8 mug ml(-1) zinc and vice versa. The developed method was applied to the simultaneous spectrophotometric determination of manganese and zinc in some synthetic mixtures and was found to give satisfactory results.     

Simultaneous determination of neodymium, erbium and holmium in rare earth mixtures with 2-phenyltrifluoroacetone and octylphenol poly(ethyleneglycol) ether by third-derivative spectrophotometry

The complexes of the rare earth metals with 2-phenyltrifluoroacetone in the presence of TX-100 are reported. The characteristic absorbances of neodymium, holmium and erbium complexes can be increased by factors of 8.5, 31 and 15 respectively, compared to those of the cholrides. The third-derivative spectra have been used to eliminate the interference of cerium, and the sensitivities are increased again by factors of 7.4, 5.5 and 6.5. A method for the direct determination of neodymium, erbium and holmium in rare earth mixtures is proposed.     

Determination of mixtures of ampicillin and cloxacillin in pharmaceuticals by second-derivative spectrophotometry

Mixtures of ampicillin-Na and cloxacillin-Na are assayed by peak-to-baseline and zero-crossing second-derivative spectrophotometry. The procedure does not require any separation step. Calibration plots are linear (r = 0.9999) up to 30 μg ml^?1 of ampicillin-Na at 216 nm and up to 40 μg ml^?1 ampicillin-Na or cloxacillin-Na at 228 nm or 248.8 nm, respectively, in the presence of one another. Detection limits at the p = 0.05 level of significance, range from 0.15 pg ml^?1 to 0.33 μg ml^?1. The method was successfully applied to commercial injections and capsules containing these penicillins.     

Simultaneous determination of uranium and thorium with Arsenazo III by second-derivative spectrophotometry

A derivative spectrophotometric method has been developed for the simultaneous determination of microgram quantities of uranium and thorium with Arsenazo III in hydrochloric acid medium. The second-derivative absorbances of the uranium and thorium Arsenazo III complexes at 679.5 and 684.4 nm are used for their quantification. Uranium and thorium, both in the range 0.1-0.7 mug/ml have been determined simultaneously with good precision. The procedure does not require separation of uranium and thorium, and allows the determination of both metals in the presence of alkaline-earth metals and zirconium, but lanthanides interfere.     

三重比光谱导数法同时测定氨基酸注射液中的三种芳香氨基酸

采用三重-比光谱导数分光光度法同时测定氨基酸注射液中的3种芳香氨基酸,讨论了测定酪氨酸、苯丙氨酸和色氨酸的实验条件.实验结果表明,在pH 7.4的NaH2PO4-NaOH缓冲溶液中,3种氨基酸的线性范围分别为:酪氨酸2.0×10-6～2.8×10-5 mol/L,苯丙氨酸2.0×10-5 ～1.6×10-3 mol/L,色氨酸4.0×10-7～1.6×10-6 mol/L.回收率在95%～105%之间.     

Automatic spectrophotometric method for the determination of europium in mixtures with yttrium and other lanthanides

Summary An automatic spectrophotometric method for the determination of europium in the presence of yttrium and other lanthanides is described. The method is based on a modification of a recently devised manual procedure consisting of the reduction, on a Jones reductor, of europium(III) to europium(II) which is used to reduce molybdophosphate to a molybdenum blue. The method is capable of analysing solutions containing 10–400 g of europium per ml at a rate of 20 samples per hour. There is no interference from yttrium or other lanthanides and the method is suitable for application to europium determination after a group separation. When applied to mineral samples coefficients of variation between 2.5 and 3.8% were obtained.

---

Automatisches spektralphotometrisches Verfahren zur Bestimmung von Europium im Gemisch mit Yttrium und anderen Lanthaniden

Zusammenfassung Das Verfahren stellt eine Modifikation eines kürzlich ausgearbeiteten manuellen Verfahrens dar, das auf Reduktion (Jones Reduktor) zu Eu(II) und Reaktion mit Molybdophosphat zu Molybdänblau beruht. 20 Proben mit 10–400 g Eu/ml können je Stunde analysiert werden. Yttrium und andere Lanthanide stören nicht. Die Molybdänblaureaktion störende Substanzen können zuvor durch eine Gruppentrennung beseitigt werden. Bei der Analyse von mineralischen Proben wurden Variationskoeffizienten zwischen 2,5 und 3,8% erhalten.

     

Study of ionization of tyrosine residues in proteins by second-derivative UV spectroscopy

Four spectrally different forms of tyrosine residues were shown to be present in proteins, namely, nonionized residues, either buried or exposed to solvent, and ionized residues buried or exposed to solvent. A method for determining the pK _a values of the tyrosine residues in proteins was proposed. It is based on the decrease in the absorption intensity in the second derivative of the UV spectrum at 284.2 nm, which is the wavelength of the isobestic point corresponding to the transition of the nonionized tyrosine residues from the buried to the exposed state. Several proteins were studied by this method; the results obtained were found to be close to the corresponding published data. This method is simpler than the conventional UV titration. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1394–1398, July, 1997.     

Simultaneous determination of estradiol and medroxyprogesterone acetate in pharmaceutical formulations by second-derivative spectrophotometry

This paper reports a simple and fast method for the simultaneous determination of estradiol (ED) and medroxyprogesterone acetate (MP) in pharmaceutical formulations by second-derivative spectrophotometry. Methanol was used to extract the drugs from formulations, and subsequently the extracts were evaluated directly by derivative spectrophotometry. The drugs were determined simultaneously by using the graphic method at 297.4 nm for ED and the zero-crossing method at 273.4 nm for MP. If both compounds are present together in a sample, it is possible to quantitate one in the presence of the other. The best signal-to-noise ratio was found when the second derivative of the spectrum was used. The linear ranges for determination of the drugs were 4.7 x 10(-6) to 1.6 x 10(-4) and 7.2 x 10(-6) to 2.0 x 10(-4) mol/L for ED and MP, respectively. The ingredients commonly found in commercial pharmaceutical formulations do not interfere with the determination. Chemical and spectral variables were optimized for the determination of both analytes. Good levels of repeatability (relative standard deviation), 1.4 and 1.9%, were obtained for ED and MP, respectively. The proposed method was applied to the determination of these drugs in pharmaceutical formulations.     

Synthesis and mesogenic properties of azomethine complexes of lanthanides with alkyl sulfate anions

Liquid-crystalline cationic complexes of lanthanides with azomethines containing the alkyl sulfate anion as the counterion were synthesized. The temperatures of existence of the mesophase of the complexes with the alkyl sulfate anion were by 80–100°C lower than those of similar complexes with the Cl⁻ and NO₃ ⁻ counterions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 387–389, February, 1999.     

Extraction and separation of lanthanides from aqueous chloride and nitrate media using mixtures of binary extractants based on secondary and tertiary amines

1. Download : Download high-res image (97KB)
2. Download : Download full-size image

     

Quantitative analysis of trivalent uranium and lanthanides in a molten chloride by absorption spectrophotometry

As an analytical application for pyrochemical reprocessing using molten salts, quantitative analysis of uranium and lanthanides by UV/Vis/NIR absorption spectrophotometry was performed. Electronic absorption spectra of LiCl–KCl eutectic at 773 K including trivalent uranium and eight rare earth elements (Y, La, Ce, Pr, Nd, Sm, Eu, and Gd as fission product elements) were measured in the wavenumber region of 4,500–33,000 cm^?1. The composition of the solutes was simulated for a reductive extraction condition in a pyroreprocessing process for spent nuclear fuels, that is, about 2 wt% U and 0.1–2 wt% rare earth elements. Since U(III) possesses strong absorption bands due to f–d transitions, an optical quartz cell with short light path length of 1 mm was adopted in the analysis. The quantitative analysis of trivalent U, Nd, Pr, and Sm was possible with their f–f transition intensities in the NIR region. The analytical results agree with the prepared concentrations within 2σ experimental uncertainties.     

Determination of tungsten with pyrocatechol violet by first-derivative solid-phase spectrophotometry

Derivative spectrophotometry was applied to solid-phase spectrophotometry in order to enhance its sensitivity and remove the large background caused by the absorbance of the resin layer. Determination of micro-amounts of tungsten with pyrocatechol violet to form a 21 green complex in acid medium which is fixed on a dextran-type anion-exchange resin (Sephadex QAEA-25) is described as an example for the application of this technique. The absorbance of the resin packed in a 1-mm spectrophotometric cell, was measured directly. The characteristic peak amplitude of the signal at 674 nm in the first-derivative spectrum is useful for quantitative determination of tungsten (3–16 g 1^–1; RSD 5.8%) in natural and industrial water samples.     

Simultaneous Determination of Atrazine and Chlorpyrifos in Pesticide Formulations,in Soils and Waters by Derivative Spectrophotometry and Ratio Spectra Derivative

Abstract

A new method is described to analyse a binary mixture of atrazine and chlorpyrifos, using first-derivative spectrophotometry for atrazine and first derivative of the ratio spectra for chlorpyrifos. The procedure does not require any separation step. Calibration graphs were linear up to 15 μg.mL^?1 of atrazine and to 10 μg.mL^?1 of chlorpyrifos. The method has been applied to determine both compounds in pesticide formulations, in soils and waters.     

Determination of sulphathiazole in the presence of sulphametazine by first-derivative solid-phase spectrophotometry

Sulphathiazole in the presence of sulphametazine is determined by a method based on derivative solid-phase spectrophotometry. Both compounds are fixed on a dextran-type cation-exchange gel. The absorbance of the gel, packed in a 1-mm silica cell, is measured directly. The range of application is between 0.20 and 18.0 g/ml of sulphathiazole in the presence of up to 20 g/ml of sulphametazine, the relative standard deviation is 0.6% and the detection limit is 0.05 g/ml. The method has been applied to the determination of sulphathiazole in synthetic mixtures and pharmaceuticals, with recoveries of 95.0 to 102.5%     

Quantitative determination of oxybutynin hydrochloride by spectrophotometry, chemometry and HPTLC in presence of its degradation product and additives in different pharmaceutical dosage forms

Simple, accurate, sensitive and validated UV spectrophotometric, chemometric and HPTLC-densitometric methods were developed for determination of oxybutynin hydrochloride (OX) in presence of its degradation product and additives in its pharmaceutical formulations. Method A is the first derivative of ratio spectra (DD¹) which allows the determination of OX in presence of its degradate in pure form and tablets by measuring the peaks amplitude at 216 nm. Method B and C are principal component regression (PCR) and partial least-squares (PLS) for determination of OX in presence of its degradate in pure form, tablets and syrup. While, the developed high performance thin layer chromatography HPTLC-densitometric method was based on the separation of OX from its degradation product, methylparaben and propylparaben followed by densitometric measurement at 220 nm which allows the determination of OX in pure form, tablets and syrup. The separation was achieved using HPTLC silica gel F₂₅₄ plates and chloroform:methanol:ammonia solution:triethylamine (100:3:0.5:0.2, v/v/v/v) as the developing system. The accuracy, precision and linearity ranges of the developed methods were determined. The results obtained were statistically compared with each other and to that of a reported HPLC method, and there was no significant difference between the proposed methods and the reported method regarding both accuracy and precision.     

Direct spectrophotometric determination of Nd in mixed rare earths with semi-xylenol orange and cetylpyridinium chloride

The derivative absorption spectra of the neodymium complex with Semi-Xylenol Orange and cetylpyridinium chloride has been investigated. The characteristic absorption of the complex is approximately 350 times that of neodymium chloride. The fourth-order derivative spectrum has been used to eliminate the interference of the other lanthanides, and to increase the sensitivity by a further factor of 6. Beer's law is obeyed for 0-7.5 microg of Nd in 25 ml of solution. The relative standard deviation for 7 determinations of 1.8 microg/25 ml neodymium was 1.3%. The detection limits were 5.8 ng/ml in the absence of lanthanum and 11.2 ng/ml in the presence of 44 ng/ml lanthanum (or 36 ng/ml yttrium). The method has been used for the determination of neodymium in mixed rare earths, with satisfactory results.