Power transfer characteristics among N parallel single-mode optical fibers

Based on the coupled-mode theory, the power transfer among “- - - -” arranged parallel single-mode optical fibers has been investigated. The analysis shows that the distances between each two of the N fiber centers have effects on the coupling coefficient and power transfer. The solution of the coupled-equations for three parallel single-mode optical fibers is given, and is studied for different initial conditions comparatively. Numerical simulations show that power transfer will be periodical during coupling among parallel single-mode optical fibers. These results can be extended to multi-parallel single-mode optical fibers.     

多根平行光纤的功率转移特性分析

基于模式耦合理论,研究了呈一字型排列的多根平行单模光纤间的功率转移,分析了光纤间距对耦合系数和功率转移的影响,给出了三根平行单模光纤耦合方程的解,针对不同的初始条件进行了比较分析.数值计算表明,呈一字型排列的多根平行单模光纤间的功率成一定周期转移.     

基于非球面透镜的空间光场光纤耦合系统研究

针对全光纤激光雷达中空间光场与单模光纤的耦合问题,设计了基于非球面透镜的望远镜光纤耦合系统.利用ZEMAX软件以单模光纤耦合效率为优化目标对其结构参量进行优化设计,然后分别用LED和激光器作为光源进行初步实验,比较直接耦合和非球面透镜耦合效果.实验结果表明,采用非球面透镜耦合可使多模光源的耦合效率比直接耦合增加约47%,与仿真结果45%非常接近,且不同芯径耦合光功率之比大略等于芯径比平方;而该耦合方式可使单模光源的耦合效率增加约20%,且耦合进不同小芯径光纤的耦合效率之比约为其芯径比平方的2.4倍,这对构建全光纤转动喇曼激光雷达系统具有重要意义.     

实际1×3单模光纤分束器的特性分析

利用五层对称平面介质波导的特征方程，导出了具有波导一体化结构的实际１×３单模光纤分束器的模场特性及其光纤间光耦合特性，并给出了实验结果．     

Characterization of coupling power for single-mode fiber fusion

Fabrication of single-mode fiber coupler by heating fibers on a flame is very common and popular. However, controlling the input and the output power quantities of the fiber coupling process is neither easy nor similar. Power losses occur at the coupling length as the effect of the geometry and structure of fibers during and after fusion. In application, the power losses will affect sensor devices, e.g. optical switch. This paper proposes power splitting into the second fiber junction as a new model by deriving and integrating the coupling power with two conditions of refractive index changes. First is the change in the vertical part and second is the change in the vertical and the horizontal parts. Both conditions are studied by perpendicular and parallel directions of coupling power. The model is examined with a linear change of refractive index where power absorption and reflection are accumulated by power losses. The result shows that power increases as the effect of losses by simulation. These power losses are lost by radiation out of cladding and fiber heating.     

126-W all-fiberized single-mode laser from an 11-μm small-core fiber

We demonstrate a 126-W all-fiberized single-mode laser from an 11-μm small-core fiber. The active fiber is a strictly single-mode fiber that produces pure single-mode. The optical to optical efficiency of the fiber laser is 68.2% with ASE suppressed by a factor of ∼35 dB and no power-roll. The output power is only limited by the available pump source, scaling the pump power may achieve much higher output power using the 11 μm small-core fiber.     

Optimal direct coupling from single-mode fibers to Ti:LiNbO3, channel waveguides

We investigate the optimal direct coupling from single-mode fibers to Ti:LihbO₃, channel waveguides using a very general formula and a heuristic optimization technique in this article. The coupling efficiency of the optical power depends on both the fiber positions and the modal sizes of the incident fields. From our numerical simulation, it is found that the optimal positions of the fiber axes are not in alignment with the peaks of the waveguiding modal fields and that the coupling efficiency can be improved by microlenses.     

Ultrafast pulse sources based on multi-mode optical fibers

Ultrafast pulse sources based on multi-mode optical fibers are discussed. High-power passively mode-locked fiber lasers based on multi-mode rare-earth-doped optical fibers greatly exceed the power limitations of single-mode oscillators. Ultrafast multi-mode fiber amplifiers operating in conjunction with multi-mode oscillators provide even higher power levels, where nonlinear propagation effects enable pulse compression to below 100 fs. Multi-mode fiber oscillators can be combined with single-mode Raman-shifting fibers to produce widely wavelength-tunable sources of femtosecond pulses. Further amplification in Yb fibers allows for the generation of sub-100-fs pulses with W-level average powers.     

Transmitted Optical Power through a Tapered Single-Mode Fiber under Dynamic Bending Effects

This paper describes theoretically one of the physical phenomena that take place in a tapered single-mode optical fiber (taper): the transfer of optical power between different order modes. This optical power transfer depends on several factors; one of them is the static bending of the taper, as other authors have reported. In addition to these studies, we have noticed that if the bend angle oscillates, then the magnitude of the optical power transfer is also modified by other additional factors. Thus, at dynamic conditions the transmitted optical power through the taper is also affected by the oscillation frequency. Here we propose a more generic equation system to obtain the coupling coefficient between modes under static as well as dynamic bending conditions. When the presented equations are particularized for static conditions, a complete agreement with other studies is observed. In addition, validating the theoretical justification, some experimental results are also shown.     

Polarization-independent grating couplers for silicon-on-insulator nanophotonic waveguides

We propose the use of subwavelength structures in a waveguide grating to achieve polarization-independent coupling of light between an optical fiber and a silicon-on-insulator (SOI) optical waveguide. The subwavelength structure allows the mode effective indices of the TE and TM modes in the grating section to be precisely engineered. We calculate that coupling efficiency of over 64% is possible using the proposed design for polarization-independent coupling between single-mode optical fibers and SOI nanophotonic waveguides.     

新型全固态准晶体结构大模场光纤特性研究

大模场单模光纤在高功率激光器、高功率光传输和高灵敏度传感器等领域具有重要意义.设计了一种新型超低损耗大模场单模光纤,包层空气孔由掺氟硅玻璃棒代替,掺氟硅玻璃棒排列呈六重准晶体结构.基于有限元法对光纤的传输特性进行了数值模拟.研究了光纤结构参量变化对模式特性和有效模场面积的影响.结果表明:波长在1064 nm处,有效模场面积高达5197μm2,基模的限制性损耗低于10-5dB/km,解决了大模场与低损耗之间的冲突;在1064—2000 nm波段内,基模与二阶模的限制性损耗相差7个量级,实现单模传输;半径为10 cm时,弯曲损耗小于0.01 dB/m,具有良好的低弯曲损耗特性.此光纤能够提高光纤热损伤阈值,减少接续损耗,全固态结构有效避免了空气孔塌陷,简化制备工艺,对高功率激光传输、光纤激光器和光纤放大器的发展具有重要意义.     

Multi-wavelength generation using a bismuth-based EDF and Brillouin effect in a linear cavity configuration

The generation of a multiple wavelength source using a bismuth-based erbium-doped fiber (Bi-EDF) in a linear cavity configuration is demonstrated. The configuration uses a pair of optical circulators at the input and output ends of the cavity to form a resonator for multi-wavelength generation in conjunction with optical couplers to inject the Brillouin pump (BP) and to tap the output at the two ends. The Brillouin erbium fiber laser (BEFL) comb with a 2.15 m of Bi-EDF has a wavelength spacing of 0.09 nm and operates in long-wavelength (L-) band region. A stable output laser comb of 50 lines is obtained at a BP of 1568.2 nm and 5 dBm and two 1480 nm pumps at 120 mW. The injected BP wavelength and power as well as the 1480 nm pump powers have a great effect on the number of lines and output power of the BEFL. This configuration is compact due to the use of the significantly shorter Bi-EDF as the linear gain medium, and can be made more compact by replacing the single-mode fiber with highly non-linear fibers such as holey fibers.     

基于ABCD矩阵的楔形柱面光纤微透镜的耦合技术分析

运用激光模式耦合理论分析了半导体激光器与楔形柱面光纤微透镜的连接损耗,设计并制作了楔形柱面光纤微透镜用来实现两者的模斑匹配。运用ABCD矩阵方法,对该组件的耦合效率进行了仿真计算和分析,得到了高耦合效率下楔形柱面光纤微透镜的结构参数。该方法可有效地用于楔形柱面光纤微透镜的优化设计。     

Gain characteristics and optimization of dual-pump fiber optical parametric amplifier using two-section highly nonlinear fibers

In this paper the gain characteristics of two-pump fiber optical parametric amplifiers (FOPA) with two-section highly nonlinear fibers are analyzed numerically and the parameters of the fibers are optimized to reach broad and flat gain spectra using genetic algorithm. Different from the previous methods, here the space between two pump wavelengths and the parameter β₄ of the fibers are included as a pivotal factor in the optimization. The numerical simulation shows that using two-section practical high nonlinear fibers, the amplifier may reach 110 nm bandwidth covering 1495–1605 nm with 10.5 dB average gain and gain ripple of 0.17 dB, when the total pump power is 1 W.     

Low-loss coupling between two single-mode optical fibers with different mode-field diameters using a graded-index multimode optical fiber

We present a method for ultra-low-loss coupling between two single-mode optical fibers with different mode-field diameters using multimode interference in a graded-index multimode optical fiber. We perform a detailed analysis of the interference effects and show that the graded-index fiber can also be used as a beam expander or condenser. The results are important for devices in which optical fibers with different mode-field diameters are coupled in series, such as in ultra-short-pulse fiber ring lasers, or in optical fiber communication links.     

Twist sensor based on Sagnac single-mode optic fiber interferometer

An optical fiber twist sensor based on Sagnac single-mode optic fiber interferometer is proposed. The stress-induced birefringence of single-mode optical fiber is obtained by applying a transverse force against a short length of singlemode fiber. A high sensitivity and resolution of the twist angle measurement of 0.19 nm/° and 0.002° is achieved experimentally, respectively. The proposed sensor is more convenient and simple than that of standard polarization-maintaining fibers.     

Simulative investigation on the impact of laser-spectral width in single-tone radio-over-fiber transmission system using optical single side-band technique

In this paper, we analyzed the impact of laser-spectral width incorporating dual-electrode Mach–Zehnder modulator (DEMZM) in single-tone radio-over-fiber (RoF) transmission system by simulation setup. It is shown that an improvement in the measurement of received radio frequency (RF) power is achieved by reducing the laser line width from 100 MHz to 100 kHz, which further improves the BER rate and optical link by transmitting the information with low power. The results are calculated for 20 and 50 km optical single sideband (OSSB)–RoF transmission system by varying the chirp from 0 to −3 as it requires less bandwidth than optical dual sideband (ODSB)–RoF system and is tolerable for power degradation due to a chromatic fiber-dispersion, through a standard single-mode fiber (SSMF) carried by a continuous wave (CW) laser at 1550 nm of laser-spectral width varying from 100 MHz to 100 kHz with CW power of 10 mW that modulates a single RF channel of 20 GHz. Further, deployment of such lasers with OSSB scheme helps the telecom industry to reduce the designing cost of RoF communication systems.     

Sensitivity-variable fiber optic pressure sensors using microbend fiber gratings

We report on sensitivity control of fiber optic sensors using microbend long-period fiber gratings. By tuning the phase difference between a pair of periodically aligned rod arrays that sandwiches a single-mode fiber, we can change the coupling strength of the core mode with radiating cladding modes, resulting in variable pressure sensitivity of the transmission power through the fiber. This technique enables control of the measurable range of pressure. When the phase difference is shifted from π toward 0, the measurable range is expanded from 1.7 to 3.3 N/cm and higher using a light-emitting diode as an input light source.     

单模光纤与Ti:LiNbO3单模平面光波导端面激励耦合的研究

本文报导一个单模光纤与单模Ti扩散LiNbO3光波导的端面耦合及固定连接实验研究.利用电弧烧熔法在单模光纤端面上制成了微透镜,改善了模场匹配程度,采用二维硅V形糟,提高了光纤与波导的对准精度。     

Methods for calculating the temperature zero drift initiated in fiber ring interferometers by random inhomogeneities in single-mode optical fibers

The specific features of the existing methods used for calculating the temperature zero drift initiated in fiber ring interferometers (FRIs) by linear coupling between polarization eigenmodes at random inhomogeneities in single-mode optical fibers are analyzed. The ranges of applicability of each method are determined. It is demonstrated that numerical simulation with a variation in the temperature of the single-mode optical fiber of the FRI loop is the most complex and, at the same time, the most universal method.