毛细管气相色谱法测定炼厂气中单体烃组分的含量

采用PLOT／Al2O3石英毛细管气相色谱柱和氢火焰离子化检测器，建立了炼厂气中单体烃组分含量测定的毛细管气相色谱法，当炼厂气中单体烃组分的含量大于或等于2．1％时，RSD≤0．95％，当炼厂气中单体烃组分的含量为0．5％－2．1％时，RSD为0．95％－10．0％，当炼厂气中单体烃组分的含量为0．2％－0．5％时，RSD为10．0％－25．0％，该方法对单体烃组分的测定结果与行业标准SH／T0230－92《液化石油气组成测定法》的测定结果基本一致。     

毛细管气相色谱法测定水果、蔬菜中17种有机氯农药的残留量

采用毛细管气相色谱法测定水果、蔬菜中17种有机氯农药的残留量。用丙酮-正己烷混合液(1：1)提取样品中的有机氯农药,将提取液浓缩后,经过弗罗里硅土层析柱净化,用HP-5毛细管柱分离,再以电子捕获检测器测定,外标法定量。方法的加标回收率为80．7％-113．1％,测定结果的相对标准偏差为9％-17％,检出限为0．5—8．0ng／g。     

毛细管气相色谱法测定电热蚊香液中的丙炔菊酯

采用HP－1毛细管气相色谱法对电热蚊香液中丙炔菊酯的含量进行了定量分析，其测定结果的相对标准偏差为0．3％，回收率为103．05，具 有操作准确、简便，快速和实用等特点。     

毛细管气相色谱法测定深海鱼油中的EPA和DHA含量

用氢氧化钾－甲醇酯化法将深海鱼油中的脂肪酸快速、有效地转化成脂肪酸甲酯,然后进行毛细管气相色谱法测定,以二十二碳饱和脂肪酸甲酯为内标物,建立了5,8,11,14,17－二十碳五烯酸（EPA）和4,7,10,13,16,19－二十二碳六烯酸（DHA）的定量分析方法,并用于实际样品分析。该方法对EPA和DHA定量分析的相对标准偏差分别为4．6％和5．0％,回收率分别为99．7％和99．4％。     

毛细管气相色谱法测定牛奶中有机氯和有机磷农药残留量

采用一个较快速、简单的方法测定牛血中有机氯和有机磷农药残留物。牛奶中农残经氯仿萃取和固相提取净化后，分别用气相色谱－电子捕获检测器和气相色谱－火焰光度检测器直接测定，色谱柱为ＨＰ－１接ＨＰ－５、ＤＢ１７大口径石英毛细管柱。本法对１７种有机氯农残的回收效率范围为７１．２％￣９９．７％，检测限为０．５￣９μｇ／ｋｇ。而１１种有机磷农残的回收率范围为７０．１％￣９６．１％，检测限则为０．０１￣０．０４ｍ     

吹扫捕集-气相色谱法测定水中苯系物

利用HP-Innowax毛细管色谱柱,对对二甲苯和间二甲苯进行了分离研究,并建立吹扫捕集-气相色谱法测定水中6种常见苯系物的方法。当水样进样体积为25mL时,方法检出限为0．08～0．30μg/L,用该方法对实际水样中的6种苯系物进行测定,回收率为69．0％～111.9％,测定结果的相对标准偏差均小于4％。     

焦炉除尘中多环芳烃的毛细管超临界流体色谱分析

研究了９个多环芳烃混合样品的超临界流体色谱分析条件，并与毛细管气相色谱法做了比较。超临界流体色谱的条件是；柱温１１０℃。程序升压９．０ＭＰａ（５ｍｉｎ）→１．４ＭＰａ／ｍｉｎ２８．０ＭＰａ。各组分保留时间的相对标准偏差为１．４％－３．０％，定量分析的相对误差为１．４％－６．０％，比毛细管气相色谱法具有明显的优越性。     

牙本质中天冬氨酸消旋化程度的测定——手性毛细管气相色谱法与高效液相色谱法的比较

应用手性毛细管气相色谱法（酸性异丙醇、三氟乙酸酐为衍生试剂）、高效液相色谱法（邻苯二甲醛－Ｎ－乙酰－Ｌ－半胱氨酸为手性衍生试剂）同时测定人类第一磨牙牙本质中天冬氨酸的消旋化程度，结果表明，两者均可有效地用于天冬氨酸对映体的分离测定，但气相色谱检测限（０．２ｐｍｏｌ）低于高效液相色谱（１．０ｐｍｏｌ），而变异系数（７％）、总分析时间（１００ｍｉｎ）均高于高效液相色谱（分别对应为４％，３１ｍｉｎ）。     

土壤中多种有机氯及拟除虫菊酯类农药的GC-ECD测定

气相色谱法同时测定土壤中多种有机氯及拟除虫菊酯类农药。对土壤的分析结果：有机氯农药的检出限0．001～0、003μg／mL，拟除虫菊酯类农药检出限0.008～0．02μg／mL，线性相关系数0．9978～0．9999。用y（石油醚）：V（丙酮）=3：1超声波提取，有机氯农药回收率94．2％～124．0％，相对标准偏差为3．3％～8．8％（n=5）；拟除虫菊酯类农药回收率95．2％～118．3％，相对标准偏差为5．7％～7．1％（n=5）；方法适用于土壤样品中农药残留测定。     

牙本质中天冬氨酸消旋化程度的测定——手性毛细管气相色谱法与高效液相色谱法的比较

 应用手性毛细管气相色谱法（酸性异丙醇、三氟乙酸酐为衍生试剂）、高效液相色谱法（邻苯二甲醛－Ｎ－乙酰－Ｌ－半胱氨酸为手性衍生试剂）同时测定人类第一磨牙牙本质中天冬氨酸的消旋化程度，结果表明，两者均可有效地用于天冬氨酸对映体的分离测定，但气相色谱检测限（０．２ｐｍｏｌ）低于高效液相色谱（１．０ｐｍｏｌ），而变异系数（７％）、总分析时间（１００ｍｉｎ）均高于高效液相色谱（分别对应为４％，３１ｍｉｎ）。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.