Segregation of Coronal Chains in Micelles Formed by Supramolecular Interactions

Summary: Spherical micelles have been formed by mixing, in DMF, a poly(styrene)‐block‐poly(2‐vinylpyridine)‐block‐poly(ethylene oxide) (PS‐block‐P2VP‐block‐PEO) triblock copolymer with either poly(acrylic acid) (PAA) or a tapered triblock copolymer consisting of a PAA central block and PEO macromonomer‐based outer blocks. Noncovalent interactions between PAA and P2VP result in the micellar core while the outer corona contains both PS and PEO chains. Segregation of the coronal chains is observed when the tapered copolymer is used.

Inclusion of comb‐like chains with short PEO teeth in the corona triggers the nanophase segregation of PS and PEO as illustrated here (PS = polystyrene; PEO = poly(ethylene oxide)).     

Reorganization of hydrogen-bonded block copolymer complexes

Poly(styrene)-block-poly(4-vinylpyridine) (PS-b-P4VP) copolymers and poly(acrylic acid) (PAA) have been mixed in organic solvents. Complexation via hydrogen bonding occurs between the P4VP and PAA blocks. Those insoluble complexes aggregate to form the core of micelles surrounded by a corona of PS chains. Reorganization of these structures occurs upon addition of acidic or basic water, which results in the breaking of the hydrogen bonds between the P4VP and PAA blocks. After transfer of the initial complexes in acidic water, micelles consisting of a PS core and a protonated P4VP corona are observed. In basic water, well-defined nanoparticles formed by the PS-b-P4VP copolymers are obtained. It is demonstrated that these nanoparticles are stabilized by the negatively charged PAA chains. Finally, thermally induced disintegration of the micelles is investigated in organic solvents.     

ROD-LIKE AGGREGATES FROM POLYSTYRENE-b-POLY(4-VINYLPYRIDINE)-b-POLYSTYRENE TRIBLOCK COPOLYMER IN AQUEOUS MEDIA

INTRODUCTIONRecently, solution-state assembly of block copolymers has attracted much interest. On the one hand, theversatility of morphology control can be used for the preparation of unique nanostructured materials with variousarchitectures[1-8]. On the other hand, some self-assembled structures are biomimetic[9,10]. The balance betweenthree major forces acting on the system affects block copolymer morphologies in solutions[11,12]. These threeforces include the stretching of the core-for…     

Metalated diblock and triblock poly(ethylene oxide)-block-poly(4-vinylpyridine) copolymers: understanding of micelle and bulk structure

The paper provides new insights into the structure of Pt-containing diblock and triblock copolymers based on poly(ethylene oxide) (PEO) and poly(4-vinylpyridine) (P4VP), using a combination of atomic force microscopy (AFM), X-ray diffraction (XRD), transmission electron microscopy (TEM), and anomalous small-angle X-ray scattering (ASAXS). Parallel studies using methods contributing supplemental structural information allowed us to comprehensively characterize sophisticated polymer systems during metalation and to exclude possible ambiguity of the data interpretation of each of the methods. AFM and TEM make available the determination of sizes of the micelles and of the Pt-containing micelle cores, respectively, while a combination of XRD, TEM, and ASAXS reveals Pt-nanoparticle size distributions and locations along with the structural information about the polymer matrix. In addition, for the first time, ASAXS revealed the organization of Pt-nanoparticle-filled diblock and triblock copolymers in the bulk. The nanoparticle characteristics are mainly determined by the type of block copolymer system in which they are found: larger particles (2.0-3.0 nm) are formed in triblock copolymer micelles, while smaller ones (1.5-2.5 nm) are found in diblock copolymer micelles. This can be explained by facilitated intermicellar exchange in triblock copolymer systems. For both systems, Pt nanoparticles have narrow particle size distributions as a result of a strong interaction between the nanoparticle surface and the P4VP units inside the micelle cores. The pH of the medium mainly influences the particle location rather than the particle size. A structural model of Pt-nanoparticle clustering in the diblock PEO-b-P4VP and triblock P4VP-b-PEO-b-P4VP copolymers in the bulk was constructed ab initio from the ASAXS data. This model reveals that nearly spherical micellar cores of about 10 nm in diameter (filled with Pt nanoparticles) aggregate forming slightly oblate hollow bodies with an outer diameter of about 40 nm.     

Molecular‐level structures at poly(4‐vinyl pyridine)/acid interfaces probed by nonlinear vibrational spectroscopy

The molecular structures of the interfaces between a solid poly(4‐vinyl pyridine) (P4VP) surface and poly(acrylic acid) (PAA) as well as hydrochloric acid (HCl) solutions were probed using sum frequency generation (SFG) vibrational spectroscopy in situ in real time. Spectroscopic results clearly reveal that the PAA molecules are adsorbed onto the P4VP surface via hydrogen bonding at the P4VP/PAA solution interface while the P4VP surface is protonated at the P4VP/HCl solution interface. Consequently, the water molecules near the interfaces are strongly perturbed by these two interactions, exhibiting different orderings at the two interfaces. This work clearly demonstrates the power of studying the interfacial molecular‐level structures via nonlinear vibrational spectroscopy when molecular adsorption happens at the solid–liquid interface and paves a way for our future study on tracing the adsorption dynamics of polymer chains onto solid surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 848–852     

Effect of poly(acrylic acid) block length distribution on polystyrene-b-poly(acrylic acid) block copolymer aggregates in solution. 2. A partial phase diagram

The first paper of the series, which focused on the effect of polydispersity on the self-assembly of block copolymer vesicles, showed that an increase in the width of the poly(acrylic acid) (PAA) block length distribution resulted in a decrease in the size of the vesicles formed. In this paper, the rest of the phase diagram is explored. For the present study, a series of polystyrene-b-poly(acrylic acid) copolymers of an identical polystyrene length of 325 units but of varying degrees of polymerization of PAA was synthesized. Mixtures of the copolymers were made to artificially broaden the molecular weight distribution of PAA at a constant number average of 48 in the polydispersity index (PDI) range of 1.1-3.3. The mixtures were dissolved in dioxane, and water was added slowly to predetermined amounts. Transmission electron microscopy was used to observe aggregate morphologies at different water contents and PAA PDIs. At low water contents, dynamic light scattering was also used to measure the sizes of the aggregates. A partial phase diagram as a function of the water content and PAA PDI was obtained. Large compound micelles and spherical micelles (average diameter of 40 nm) were found at low water contents; however, at a water content of 12% (w/w), a continuum of morphologies from spheres to rods to vesicles was found with increasing PAA PDI. In addition, each copolymer was investigated by itself under identical conditions to those used for the mixtures to determine if there was any segregation of the individual polymers into separate aggregates. No evidence for such segregation was found.     

Amphiphilic Seven-arm Star Triblock Copolymers with Diverse Morphologies in Aqueous Solution Induced by Crystallization and pH

Well-defined amphiphilic seven-arm star triblock copolymers containing hydrophobic crystalline poly(ε-caprolactone)(PCL) blocks, hydrophobic non-crystalline poly(tert-butyl acrylate)(PtBA) blocks and hydrophilic poly(ethylene glycol)(PEG) blocks were precisely synthesized by a combination of ring-opening polymerization(ROP), atom transfer radical polymerization(ATRP) and “click” reaction. Such star copolymers could self-assemble into “core-shell-corona” micelles and “multi-layer” vesicles depending on the fraction of each block. Meanwhile, the selective hydrolysis of middle PtBA blocks into the poly(acrylic acid)(PAA) blocks allowed the star block copolymers to further change their morphologies of aqueous aggregates in response to pH values.     

Aggregates in solution of binary mixtures of amphiphilic diblock copolymers with different chain length

The polydispersity effect of amphiphilic AB diblock copolymers on the self-assembled morphologies in solution has been investigated by the real-space implementation of self-consistent field theory (SCFT) in two dimensions (2D). The polydispersity is artificially obtained by mixing binary diblock copolymers where the hydrophilic or hydrophobic blocks are composed of two different lengths while the other block length is kept the same. The main advantage is that this simple polydispersity can easily distinguish the difference of aggregates in the density distribution of long and short block length intuitionally and quantitatively. The morphology transition from vesicles to micelles is observed with increasing polydispersity of copolymers due to the length segregation of copolymers. For polydisperse hydrophilic or hydrophobic blocks, the short blocks tend to distribute at the interfaces between hydrophilic and hydrophobic blocks while the long blocks stretch to the outer space. More specifically, by quantitatively taking the sum of all the concentration distribution of long and short chains over the inside and outside surface areas of the vesicle, it is found that long blocks prefer to locate on the outside surface of the vesicle while short ones prefer the inside. Such length segregation leads to large curvature of the aggregate, thus resulting in the decrease of the aggregate size.     

Self‐assembled complexes of poly(acrylic acid) and poly(styrene)‐block‐poly(4‐vinyl pyridine)

Polymer complexes were prepared from high molecular weight poly(acrylic acid) (PAA) and poly(styrene)‐block‐poly(4‐vinyl pyridine) (PS‐b‐P4VP) in dimethyl formamide (DMF). The hydrogen bonding interactions, phase behavior, and morphology of the complexes were investigated using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this A‐b‐B/C type block copolymer/homopolymer system, P4VP block of the block copolymer has strong intermolecular interaction with PAA which led to the formation of nanostructured micelles at various PAA concentrations. The pure PS‐b‐P4VP block copolymer showed a cylindrical rodlike morphology. Spherical micelles were observed in the complexes and the size of the micelles increased with increasing PAA concentration. The micelles are composed of hydrogen‐bonded PAA/P4VP core and non‐bonded PS corona. Finally, a model was proposed to explain the microphase morphology of complex based on the experimental results obtained. The selective swelling of the PS‐b‐P4VP block copolymer by PAA resulted in the formation of different micelles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1192–1202, 2009     

Double‐hydrophilic block copolymer for encapsulation and two‐way pH change‐induced release of metalloporphyrins

A double hydrophilic block copolymer composed of poly(acrylic acid) (PAA) and poly(4‐vinyl pyridine) (P4VP) was obtained through hydrolysis of diblock copolymer of poly(tert‐butyl acrylate) (PtBA) and P4VP synthesized using atom transfer radical polymerization. Water‐soluble micelles with PAA core and P4VP corona were observed at low (acidic) pH, while micelles with P4VP core and PAA corona were formed at high (basic) pH. Two metalloporphyrins, zinc tetraphenylporphyrin (ZnTPP) and cobalt tetraphenylporphyrin (CoTPP), were used as model compounds to investigate the encapsulation of hydrophobic molecules by both types of micelles. UV–vis spectroscopic measurements indicate that micelles with P4VP core are able to entrap more ZnTPP and CoTPP as a result of the axial coordination between the transition metals and the pyridine groups. The study found that metalloporphyrins encapsulated by the micelles with PAA core could be released on pH increase, while those entrapped by the micelles with P4VP core could be released on pH decrease. This behavior originates from the two‐way pH change‐induced disruption of PAA‐b‐P4VP micelles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1734–1744, 2006     

Control on the Morphology of ABA Amphiphilic Triblock Copolymer Micelles in Dioxane/Water Mixture Solvent

This work offers a typical understanding of the factors that govern the nanostructures of poly(4-vinyl pyridine)-b-polystyrene-bpoly(4-vinyl pyridine)(P4 VP-b-PS-b-P4 VP) block copolymers(BCs) in dioxane/water, in which water is a selective solvent for the P4 VP block. It is achieved through an investigation of the amphiphilic triblock copolymer micelles by variation of three different factors, including water content(above CWC but under the immobile concentration), temperature(ranging from 20 °C to 80 °C), and copolymer composition(low and high PS block length). Transition of bead-like micelles to vesicles is observed with the increase of water content due to the increase of interfacial energy between the copolymer and the solvent. Effect of temperature superposed on that of water content results in various morphologies, such as beads, fibers, rods, capsules, toroids, lamellae, and vesicles. The interfacial tension between the BC and the solvent increases with the increase of water content but decreases with the increase of temperature, indicating that the micellar morphologies are resulted from the competitive interplay between the temperature and the water content and always change in a direction that decreases the interfacial energy. Based on the micellar structures obtained in this work and the effects of temperature superposed on water concentration, a diagram of phase evolution of different micellar morphologies is illustrated here, covering the temperature range from 20 °C to 80 °C and the water content changing from 20 vol% to 35 vol%. For the investigation of BC composition, morphological transition of vesicle-to-fiber, for high PS length, is observed as compared with bead-to-capsule for low PS length, as the temperature changes from 20 °C to 80 °C. Our research complements the protocols to control over the morphologies and the phase diagram describing P4 VP-b-PS-b-P4 VP micellar nanostructures in aqueous solution.     

Multiple self-assembled nanostructures from an oligo(p-phenyleneethynylene) containing rod-coil-rod triblock copolymer

Induced by systematic variation of the initial polymer concentration in toluene, various morphologies of aggregates including vesicles, spheres, onion-like structures, and worm-like fibers from a rod-coil-rod triblock copolymer, oligo(p-phenyleneethynylene)-polystyrene-oligo(p-phenyleneethynylene), were observed by transmission electron microscopy.     

Mesoscopic simulations on the aggregation behavior of pH-responsive polymeric micelles for drug delivery

Computer simulations, dissipative particle dynamics (DPD) and mesoscopic dynamics (MesoDyn), are performed to study the aggregation behavior of pH-sensitive micelles self-assembled from amphiphilic polymer poly(methyl methacrylate-co-methacrylic acid)-b-poly(poly-(ethylene glycol) methyl ether monomethacrylate), P(MMA-co-MAA)-b-PPEGMA. Ibuprofen (IBU) is selected as the model drug. It can be seen from DPD simulations that P(MMA-co-MAA)-b-PPEGMA and IBU form spherical core-shell micelles at certain compositions, and IBU molecules distribute inside the core formed by hydrophobic MMA. The polymer molecules aggregate first, and then IBU diffuses into the aggregate, forming drug-loaded nanoparticles. With different compositions of polymer and IBU, aggregate morphologies in water are observed as sphere, column and lamella. From MesoDyn results, with less hydrophobic MMA beads, the polymer chains are more difficult to form ordered aggregates, and the order parameters get equilibrated in a longer time. The pH value also affects the aggregate process. At pH<5, the polymer could form traditional core-shell micelles. But at pH>5, the morphology of micelles is found to be anomalous and loose for releasing drug. MAA aggregates on the surface, instead of the inside. The simulation results are qualitatively consistent with the experimental results.     

Self‐assembly of a triblock terpolymer mediated by hydrogen‐bonded complexes

A poly(methyl methacrylate)‐block‐poly(4‐vinylpyridine)‐block‐polystyrene (PMMA‐b‐P4VP‐b‐PS) triblock terpolymer is synthesized by ATRP to study its self‐assembly with PAA in organic solvents. The self‐assembly behavior of this system is compared with the one of a mixture of two diblocks, namely polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) and poly(methyl methacrylate)‐block‐poly(methacrylic acid) (PMMA‐b‐PMAA). For both systems, formation of hydrogen‐bonded complexes between the P4VP and PMAA or PAA blocks occurs. These complexes become insoluble in the solvent used and micelles with a P4VP/P(M)AA complexes core surrounded by PS and PMMA coronal chains are obtained in both cases. These micelles are analyzed by DLS and TEM. Spherical micelles are formed for both systems but the hydrodynamic radii obtained for the two types of micelles are different. Indeed, the micelles formed by the PMMA‐b‐P4VP‐b‐PS + PAA system are smaller than those observed for the PS‐b‐P4VP + PMMA‐b‐PMAA system. Finally, the effect of the molar ratio of the P4VP/PMAA complexing blocks is investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 459–467     

阴离子疏水单体改性的P(AM-co-DMC)的合成及絮凝性能

在少量阴离子疏水单体4-(ω-丙烯酰氧乙氧基)苯甲酸(PEBA)的参与下,合成了丙烯酰胺(AM)-丙烯酰氧乙基三甲基氯化铵(DMC)共聚物。通过表观黏度及芘探针发射谱测定了疏水改性P(AM-co-DMC)溶液的临界缔合浓度(CAC)。透射电镜观察表明:在水溶液中,当疏水改性P(AM-co-DMC)浓度高于CAC时,因静电及疏水作用可形成微球状缔合体。对高岭土悬浮液的絮凝表明,与普通P(AM-co-DMC)共聚物相比,疏水改性P(AM-co-DMC)具有较好的絮凝能力及较宽的窗体用量。pH对絮凝效果的影响表明,除疏水作用外,高分子链间的静电作用是提高絮凝效果的另一原因。     

Synthesis and characterization of pH sensitive poly(glycidol)‐b‐poly(4‐vinylpyridine) block copolymers

Block copolymers of poly(glycidol)‐b‐poly(4‐vinylpyridine) were obtained by ATRP of 4‐vinylpyridine initiated by ω‐(2‐chloropropionyl) poly(glycidol) macroinitiators. By changing the monomer/macroinitiator ratio in the synthesis polymers with varied P4VP/PGl molar ratio were obtained. The obtained block copolymers showed pH sensitive solubility. It was found that the linkage of a hydrophilic poly(glycidol) block to a P4VP influenced the pK_a value of P4VP. DLS measurements showed the formation of fully collapsed aggregates exceeding pH 4.7. Above this pH values the collapsed P4VP core of the aggregates was stabilized by a surrounding hydrophilic poly(glycidol) corona. The size of the aggregates depended significantly upon the composition of the block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1782–1794, 2009     

Loose complexation of weakly charged microemulsion droplets and a polyelectrolyte

The effect of polyelectrolyte addition on the properties of an oil-in-water (O/W) microemulsion of weakly charged spherical micelles is studied. The 81 A radius O/W droplets in this system can be charged by the partial substitution of the nonionic surfactant by a cationic surfactant. The effect of the addition of poly(acrylic acid) (PAA), which is a charged pH-dependent polyelectrolyte, on the interactions between charged or noncharged droplets has been investigated using SANS. We have characterized the phase behavior of this pH-smart system as a function of the microemulsion and the polyelectrolyte concentration and the number of charges per droplet at three pH values: pH = 2, 4.5, and 12. In particular, an associative phase separation due to the bridging of the droplets by the neutral PAA chains through H-bonds is observed with extremely low PAA addition at low pH. At the opposite, an addition of PAA at pH = 4.5 generates a strong repulsive contribution between neutral droplets. Electrostatic bonds between charged droplets and PAA, controlled by the number of charges per droplet, are responsible for a pH drift and then for an associative phase separation similar to that observed at low pH. Finally, at high pH, the creation of electrostatic bonds between fully charged PAA and charged droplets liberates sufficiently counterions in solution at high droplet charge density to screen the electrostatic interactions and to allow an associative phase separation.     

带有可调通道的嵌段共聚物胶束对药物的控制释放

用聚丙烯酸叔丁酯-b-聚乙二醇(PtBA45-b-PEG114)和聚丙烯酸叔丁酯-b-聚4-乙烯基吡啶(PtBA60-b-P4VP80)制备了复合胶束. 该胶束在pH=2.5的酸性水溶液中形成以PtBA为核, PEG和P4VP为壳的稳定球型结构. 在pH=12时, 壳层的P4VP链段变为疏水, 塌缩在PtBA的核上形成内壳, PEG链段继续保持溶解状态, 与成核的PtBA连接并穿过塌陷的P4VP内壳, 形成胶束的冠, 由于PEG处于溶解状态, 其分子链间有比较大的空隙, 可以控制一些小分子通过, 在胶束的表面形成通道. 该通道类似于生物膜的蛋白通道, 可以控制PtBA核与外界进行能量或物质交换的速度. 以布洛芬为模型分子, 负载在胶束内进行药物控制释放研究的结果表明, 胶束表面的通道可以起到明显控制布洛芬释放速度的作用, 并且药物的释放速度与通道在胶束表面的比例成正比.     

Formation of vesicles in block copolymer-fluorinated surfactant complexes

Spherical micellar aggregates have been obtained in chloroform by mixing poly(styrene)-block-poly(4-vinylpyridine) (PS-b-P4VP) diblock copolymers with perfluorinated surfactants (FS) bearing a carboxylic acid head. These micellar aggregates are resulting from the self-assembly of the insoluble P4VP/fluorinated complexes into a core surrounded by the soluble PS coronal chains. Their characteristic features have been studied as a function of various parameters including the composition of the PS-b-P4VP copolymer, the tail length of the fluorinated surfactant, the 4VP/FS molar ratio, the number of carboxylic acid group (1 or 2) on the surfactant, the presence of the PS block and of the fluorine atoms on the surfactant. Dilution of these initial micellar aggregates triggers a morphological reorganization resulting in the formation of more stable vesicles. The extent of this morphological transition is related to the solubility of the P4VP/fluorinated complexes during the dilution process. This transition is complete for short P4VP/FS complexes, incomplete for long P4VP/FS complexes, and not observed whenever an alpha,omega-difunctional FS is used in P4VP/FS complexes, leading to a cross-linked core. Finally, the spheres-to-vesicles transition has been advantageously used in order to encapsulate molecules, as demonstrated by confocal fluorescence microscopy.     

Dendrimer influenced supramolecular structure formation of block copolymers: II. Dendrimer concentration dependence

The dendrimer concentration dependence of the supramolecular structure formation of polystyrene-block-poly(acrylic acid) in dioxane/THF was investigated as a function of water content. The distribution as well as the localization of the dendrimer units inside the formed aggregates were determined by comparative studies of turbidity measurements and transmission electron microscopy. The strong and specific interactions present between the amine groups of the dendrimer (PAMAM) and the carboxylic acid residues of PAA in the copolymer have a strong influence on the structure formation. The PAMAM concentration as well as the character of the terminal groups of the dendrimer influence the strength of these interactions and consequently affect the structure formation process. As shown by fluorescence quenching experiments, on all supramolecular hierarchical structure levels, and specifically in vesicles, the dendrimer is coated by the PAA chains of the block copolymer due to the strong interactions; since the PAA blocks are connected to the PS blocks, which form the corona, the dendrimer is surrounded by PS chains and is thus encapsulated into the hydrophobic regions of the block copolymer aggregates. A high-resolution transmission electron microscopy image of a micelle is shown, in which the individual dendrimer cores are seen to be localized in the center of these aggregates, and thus, the structure proposed in the previous publication (Kroeger, A.; Li, X.; Eisenberg, A. Langmuir 2007, 23, 10732) is confirmed. Furthermore, the sizes of the resulting aggregates depend on the relative concentration of dendrimer, expressed as RAm/Ac (the ratio of amine to acid groups). With increasing RAm/Ac values, not only the sizes of the micelles but also the vesicle dimensions, especially vesicle wall thicknesses, increase, and this effect suggests the encapsulation of the dendrimer into the vesicle walls. Thus, the constitution of the vesicle structure is determined precisely. This feature allows the potential incorporation of a wide range of species into the vesicle walls or the center of the micelle cores.