Patterned supported lipid bilayers and monolayers on poly(dimethylsiloxane)

A simple and practical method for patterning supported lipid bilayers on poly(dimethylsiloxane) is presented. By using electron microscopy grids to laterally control the extent of plasma oxidation, the substrate is partitioned into regions of different hydrophilicities. Addition of vesicles then results in the spontaneous formation of lipid bilayers and monolayers side-by-side on the surface, separated by regions that contain no lipid and/or a region with adhering vesicles. By using millimeter-sized plastic masks we are able to control the formation of these lipid structures on macroscopic patches by simply varying the plasma-cleaning time. For the first time, we are able to influence, in a controlled fashion, the chemical composition of a substrate in such a way that it supports fluid lipid monolayers, rejects lipid adhesion, adsorbs intact lipid vesicles, or supports fluid bilayers.     

Bridging across length scales: multi-scale ordering of supported lipid bilayers via lipoprotein self-assembly and surface patterning

We show that a two-step process, involving spontaneous self-assembly of lipids and apolipoproteins and surface patterning, produces single, supported lipid bilayers over two discrete and independently adjustable length scales. Specifically, an aqueous phase incubation of DMPC vesicles with purified apolipoprotein A-I results in the reconstitution of high density lipoprotein (rHDL), wherein nanoscale clusters of single lipid bilayers are corralled by the protein. Adsorption of these discoidal particles to clean hydrophilic glass (or silicon) followed by direct exposure to a spatial pattern of short-wavelength UV radiation directly produces microscopic patterns of nanostructured bilayers. Alternatively, simple incubation of aqueous phase rHDL with a chemically patterned hydrophilic/hydrophobic surface produces a novel compositional pattern, caused by an increased affinity for adsorption onto hydrophilic regions relative to the surrounding hydrophobic regions. Further, by simple chemical denaturation of the boundary protein, nanoscale compartmentalization can be selectively erased, thus producing patterns of laterally fluid, lipid bilayers structured solely at the mesoscopic length scale. Since these aqueous phase microarrays of nanostructured lipid bilayers allow for membrane proteins to be embedded within single nanoscale bilayer compartments, they present a viable means of generating high-density membrane protein arrays. Such a system would permit in-depth elucidation of membrane protein structure-function relationships and the consequences of membrane compartmentalization on lipid dynamics.     

Stabilization of vesicular and supported membranes by glycolipid oxime polymers

We report herein new synthetic glycolipid dimers and polymers that provide unprecedented stability to both supported (SLBs) and vesicular lipid bilayers against dehydration and serum exposure. These novel physical properties will enable pharmaceutical delivery and development of SLB bioanalytical devices.     

Local concentration of gel phase domains in supported lipid bilayers under light irradiation in binary mixture of phospholipids doped with dyes for photoinduced activation

Recently, lipid bilayers supported on solid substrates are considered to offer potential as biological devices utilizing biological membranes and membrane proteins. In particular, artificially patterned supported bilayers hold great promise for the development of biological devices. In this study, we show control of the formation and location of phase-separated domain structures by light irradiation for gel phase and liquid-crystalline phase separation structures in a DMPC-DOPC binary lipid bilayer tagged with dye molecules on SiO2/Si substrates. Upon light irradiation, the gel phase domain structures disappeared from the phase-separated bilayers. This disappearance indicates that the light irradiation causes a local increase in the temperature of the lipid bilayer. In this disappearance phenomenon, the photoinduced activation of dye lipids, e.g. fluorescent lipids, is considered to play an important role, since the same phenomenon does not occur in lipid bilayers that have a low concentration of dye lipids. Thus, the local increase in temperature is propagated by light absorption of the dye lipid and subsequent photoinduced activation of nonradiative molecular vibrations. Subsequent interruption of the photoinduced activation for molecular motion allowed the gel phase domain structures to precipitate and grow again. Moreover, the domain area fraction remaining after the photoinduced activation was higher than that before the photoinduced activation. This result indicates that the local increase in temperature propagated by dye-excitation enhances formation of the gel phase domains. By utilizing this phenomenon, we could preferentially induce formation of domain structures within the light-irradiated regions. This technique could be the basis for a new patterning technique based on domain structures. Moreover, these domain structure patterns can be eliminated by increasing the temperature, allowing rewritable patterning.     

Micropatterned supported membranes as tools for quantitative studies of the immunological synapse

In living cells, membrane receptors transduce ligand binding into signals that initiate proliferation, specialization, and secretion of signaling molecules. Spatial organization of such receptors regulates signaling in several key immune cell interactions. In the most extensively studied of these, a T cell recognizes membrane-bound antigen presented by another cell, and forms a complex junction called the "immunological synapse" (IS). The importance of spatial organization at the IS and the quantification of its effect on signaling remain controversial topics. Researchers have successfully investigated the IS using lipid bilayers supported on solid substrates as model antigen-presenting membranes. Recent technical developments have enabled micron- and nanometre-scale patterning of supported lipid bilayers (SLBs) and their application to immune cell studies with provocative results, including spatial mutation of the IS. In this tutorial review, we introduce the IS; discuss SLB techniques, including micropatterning; and discuss various methods used to perturb and quantify the IS.     

Dehydration damage of domain-exhibiting supported bilayers: an AFM study on the protective effects of disaccharides and other stabilizing substances

Atomic force microscopy (AFM) has been applied to characterize hydrated sphingomyelin/dioleoylphosphatidylcholine/cholesterol supported bilayers, after dehydration either in the absence or in the presence of several stabilizing substances. Such a study provides information about the effect of extreme environmental conditions on biological membranes and, in particular, on lipidic microdomains. Dehydration stress, indeed, is thought to cause both macroscopical damage and alterations of microdomains in biomembranes, leading to deleterious effects. These phenomena can be avoided if disaccharides are added during dehydration. In this work, we apply AFM imaging to directly visualize damage caused to supported lipid bilayers by water removal. We compare the efficiency of sucrose, trehalose, dextran, dimethyl sulfoxide, and glucose in preserving the structural integrity of domain-exhibiting model membranes. Finally, in addition to confirming previous findings, our results provide further insight into damage and alteration of microdomains in membranes as a consequence of stressful drying conditions.     

Self-assembled structures with liquid-crystalline order in aqueous solution by patterning poly(phenylene ethynylene)s

Facially amphiphilic (FA) phenylene ethynylene (PE) polymers that self-assemble in aqueous solution were studied by small-angle X-ray diffraction (SAXD) and found to self-assemble into bilayers with a fully extended backbone. The resulting bilayers have long-range liquid-crystalline order. This self-assembly is programmed into the molecule by placing polar and nonpolar groups at precise locations so that they segregate onto opposite sides of the molecular structure. The absence of FA patterning generated an amorphous sample confirming the importance of this programmed amphiphilicity in the self-assembly process. Facially amphiphilic patterning represents a new design criterion for supramolecular chemistry, illustrated here in the observation of molecular ordering into bilayers reminiscent of self-assembled structures commonly found in biology, including amphiphilic beta-sheet polypeptides and phospholipid bilayers.     

Microfluidic patterning of nanodisc lipid bilayers and multiplexed analysis of protein interaction

We report a microfluidic method for precisely patterning lipid bilayers and a multiplexed assay to examine the interaction between the lipids and protein analytes. The lipids were packaged into nanoscale lipid bilayer particles known as Nanodiscs and delivered to surfaces using microfluidic channels. Two types of lipids were used in this study: biontinylated lipids and phosphoserine lipids. The deposition of biotinylated lipids on a glass surface was confirmed by attaching streptavidin coated quantum dots to the lipids, followed by fluorescent imaging. Using this multiplexed grid assay, we examined binding of annexin to phosphoserine lipids, and compared these results to similar analysis performed by surface plasmon resonance.     

Measuring lipid asymmetry in planar supported bilayers by fluorescence interference contrast microscopy

There is substantial scientific and practical interest in engineering supported lipid bilayers with asymmetric lipid distributions as models for biological cell membranes. In principle, it should be possible to make asymmetric supported lipid bilayers by either the Langmuir-Blodgett/Schafer (LB/LS) or Langmuir-Blodgett/vesicle fusion (LB/VF) techniques (Kalb et al. Biochim. Biophys. Acta 1992, 1103, 307-316). However, the retention of asymmetry in biologically relevant lipid bilayers has never been experimentally examined in any of these systems. In the present work, we developed a technique that is based on fluorescence interference contrast (FLIC) microscopy to measure lipid asymmetry in supported bilayers. We compared the final degree of lipid asymmetry in LB/LS and LB/VF bilayers with and without cholesterol in liquid-ordered (l(o)) and liquid-disordered (l(d)) phases. Of five different fluorescent lipid probes that were examined, 1,2-dipalmitoyl-phosphatidylethanolamine-N-[lissamine rhodamine B] was the best for studying supported bilayers of complex composition and phase by FLIC microscopy. An asymmetrically labeled bilayer made by the LB/LS method was found to be at best 70-80% asymmetric once completed. In LB/LS bilayers of either l(o) or l(d) phase, cholesterol increased the degree of lipid mixing between the opposing monolayers. The use of a tethered polymer support for the initial monolayer did not improve lipid asymmetry in the resulting bilayer. However, asymmetric LB/VF bilayers retained nearly 100% asymmetric label, with or without the use of a tethered polymer support. Finally, lipid mixing across the center of LB/LS bilayers was found to have drastic effects on the appearance of l(d)-l(o) phase coexistence as shown by epifluorescence microscopy.     

Solid-state NMR analysis of the orientation and dynamics of epigallocatechin gallate, a green tea polyphenol, incorporated into lipid bilayers

Catechins are the principle polyphenolic compounds in green tea; the four major compounds identified are epicatechin (EC), epigallocatechin (EGC), epicatechin gallate (ECg) and epigallocatechin gallate (EGCg). Tea catechins tend to attach externally to their targets, such as viral envelopes, cell membranes, or the surface of low-density lipoproteins. In order to further our understanding of the molecular mobility of these compounds in cells, we examined the interaction of tea catechins with lipid membranes using solid-state NMR techniques. Our previous work indicated that the EGCg molecule is incorporated into lipid bilayers in a unique orientation. However, the detailed configuration, orientation, and dynamics of EGCg in lipid bilayers have not been well-characterized. Here, we investigated the orientation and dynamics of EGCg incorporated into multi-lamellar vesicles (MLVs) and bicelles using solid-state NMR spectroscopy.     

Supported lipid bilayers lifted from the substrate by layer-by-layer polyion cushions on self-assembled monolayers

The formation of lipid bilayers, lifted from the solid substrate by layer-by-layer polyion cushions, on self-assembled monolayers (SAMs) on gold was investigated by surface plasmon resonance (SPR) and fluorescence recovery after photobleaching (FRAP). The polyions poly(diallyldimethylammonium chloride) (PDDA) and polystyrene sulfonate (PSS) sodium salt were used for the layer-by-layer polyion macromolecular assembly. The cushion was formed by electrostatic interaction of PDDA/PSS/PDDA layers with a negatively charged surface of an SAM of 11-mercaptoundecanoic acid (MUA) on gold. The lipid bilayer membranes were deposited by vesicle fusion with different compositions of SOPS (an anionic lipid, 1-stearoyl-2-oleoyl-phosphatidylserine) and POPC (a zwitterionic lipid, 1-palmitoyl-2-oleoylphosphatidylcholine). In the case of pure SOPS and for lipid mixtures with a POPC composition up to 25%, single bilayers were deposited. FRAP experiments showed that single bilayers supported on PDDA/PSS/PDDA/MUA were mobile at room temperature, with lateral coefficients of approximately (1.2–2.1)×10⁻⁹ cm²/s. The kinetics of the addition of the ion-channel-forming peptide protegrin-1 to the supported bilayers was detected by SPR. A two-step interaction was observed, similar to the association behavior of protegrin-1 with bilayers supported on PDDA/MUA. The results are similar to that of supported lipid bilayers without a layer-by-layer cushion. The model membrane system in this work is a potential biosensor for mimicking the natural activities of biomolecules and is a possible tool to investigate the fundamental properties of biomembranes.     

Polarization modulation infrared reflection absorption spectroscopy investigations of thin silica films deposited on gold. 2. Structural analysis of a 1,2-dimyristoyl-sn-glycero-3-phosphocholine bilayer

In this paper we report on the structural analysis of bilayers of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) using polarization modulation infrared reflection absorption spectroscopy (PM IRRAS). The lipid bilayers were formed on SiO2|Au and Au surfaces using the Langmuir-Blodgett and Langmuir-Schaeffer techniques. As we showed in part 1 (Zawisza, I.; Wittstock, G.; Boukherroub, R.; Szunertis, S. Langmuir 2007, 23, 9303-9309), SiO2 layers of 7 nm thickness, synthesized by plasma-enhanced chemical vapor deposition on 200 nm thick gold covered glass slides, allow PM IRRAS investigations. Only minor changes in the order and structure of the lipid bilayer are observed when deposited on SiO2|Au and Au surfaces. The choline moiety in the leaflet directed toward the SiO2 surface exists in trans conformation and shows a tilt of 28 degrees with the surface normal of the CN bond. On the silica surface in the second leaflet directed toward air and in two layers deposited on the Au surface, trans and gauche isomers of the choline moiety are present and the tilt of the CN bond increases to 55 degrees with respect to the surface normal. The order and molecular orientation in the DMPC bilayers on SiO2 and Au surfaces are not affected by time. The analysis of the phosphate stretching mode on the Au surface shows slight dehydration of this group and reorientation of the phosphate moiety.     

Interactions in lipid stabilised foam films

The interaction between lipid bilayers in water has been intensively studied over the last decades. Osmotic stress was applied to evaluate the forces between two approaching lipid bilayers in aqueous solution. The force–distance relation between lipid mono- or bilayers deposited on mica sheets using a surface force apparatus (SFA) was also measured. Lipid stabilised foam films offer another possibility to study the interactions between lipid monolayers. These films can be prepared comparatively easy with very good reproducibility. Foam films consist usually of two adsorbed surfactant monolayers separated by a layer of the aqueous solution from which the film is created. Their thickness can be conveniently measured using microinterferometric techniques. Studies with foam films deliver valuable information on the interactions between lipid membranes and especially their stability and permeability. Presenting inverse black lipid membrane (BLM) foam films supply information about the properties of the lipid self-organisation in bilayers. The present paper summarises results on microscopic lipid stabilised foam films by measuring their thickness and contact angle. Most of the presented results concern foam films prepared from dispersions of the zwitterionic lipid 1,2-dimyristoyl-sn-glycero-3-phosphorylcholine (DMPC) and some of its mixtures with the anionic lipid — 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DMPG).     

Single Lipid Bilayers Constructed on Polymer Cushion Studied by Sum Frequency Generation Vibrational Spectroscopy

Planar solid supported single lipid bilayers on mica, glass, or other inorganic surfaces have been widely used as models for cell membranes. To more closely mimic the cell membrane environment, soft hydrophilic polymer cushions were introduced between the hard inorganic substrate and the lipid bilayer to completely avoid the possible substrate-lipid interactions. In this article, sum frequency generation (SFG) vibrational spectroscopy was used to examine and compare single lipid bilayers assembled on the CaF(2) prism surface and on poly (L-lactic acid) (PLLA) cushion. By using asymmetric lipid bilayers composed of a hydrogenated 1,2-dipalmitoyl-sn-glycerol-3-phosphoglycerol (DPPG) leaflet and a deuterated 1,2-dipalmitoyl-(d62)-sn-glycerol-3-phosphoglycerol (d-DPPG) leaflet, it was shown that the DPPG lipid bilayers deposited on the CaF(2) and PLLA surfaces have similar structures. SFG has also been applied to investigate molecular interactions between an antimicrobial peptide Cecropin P(1) (CP1) and the lipid bilayers on the above two different surfaces. Similar results were again obtained. This research demonstrated that the hydrophilic PLLA cushion can serve as an excellent substrate to support single lipid bilayers. We believe that it can be an important cell membrane model for future studies on transmembrane proteins, for which the possible inorganic substrate-bilayer interactions may affect the protein structure or function.     

Interaction of amphipathic model lipopeptides with phospholipid bilayers.

In order to investigate the conformation and localization of lipopeptides in lipid bilayers, a basic model peptide with a long alkyl chain, Ac-Ser-Val-Lys-Amy-Ser-Trp-Lys-Val-NHCH3 Amy-1; Amy = alpha-aminomyristic acid) was synthesized. Its interaction with neutral and acidic phospholipid bilayers was studied by circular dichroism (CD) spectroscopy, dye leakage and fluorescence measurements. Another peptide, Ac-Leu-Ala-Arg-Leu-Trp-Amy-Arg-Leu-Leu-Ala-Arg-Leu-NHCH3 (Amy-2), which was prepared previously, was used for comparison. The CD data indicated that Amy-1 took a beta-turn and/or a beta-structure in the absence and presence of liposomes. Amy-2 formed a beta-structure in aqueous solution and an alpha-helical structure in liposomes. The dye leakage ability of Amy-1 was much weaker than that of Amy-2. Fluorescence spectroscopic data suggest that the peptides are immersed in lipid bilayers. Based on these results, discussion is made in terms of localization of the peptides in lipid bilayers.     

Lipid fluorination enables phase separation from fluid phospholipid bilayers

To probe the effect of lipid fluorination on the formation of lipid domains in phospholipid bilayers, several new fluorinated and non-fluorinated synthetic lipids were synthesised, and the extent of phase separation of these lipids from phospholipid bilayers of different compositions was determined. At membrane concentrations as low as 1% mol/mol, both fluorinated and non-fluorinated lipids were observed to phase separate from a gel-phase (solid ordered) phospholipid matrix, but bilayers in a liquid disordered state caused no phase separation; if the gel-phase samples were heated above the transition temperature, then phase separation was lost. We found incorporation of perfluoroalkyl groups into the lipid enhanced phase separation, to such an extent that phase separation was observed from cholesterol containing bilayers in the liquid ordered phase.     

Micropatterned composite membranes of polymerized and fluid lipid bilayers

Micropatterned composite membranes of polymerized and fluid lipid bilayers were constructed on solid substrates. Lithographic photopolymerization of a diacetylene-containing phospholipid, 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DiynePC), and subsequent removal of nonreacted monomers by a detergent solution (0.1 M sodium dodecyl sulfate (SDS)) yielded a patterned polymeric bilayer matrix on the substrate. Fluid lipid bilayers of phosphatidylcholine from egg yolk (egg-PC) were incorporated into the lipid-free wells surrounded by the polymeric bilayers through the process of fusion and reorganization of suspended small unilamellar vesicles. Spatial distribution of the fluid bilayers in the patterned bilayer depended on the degree of photopolymerization that in turn could be modulated by varying the applied UV irradiation dose. The polymeric bilayer domains blocked lateral diffusion of the fluid lipid bilayers and confined them in the defined areas (corrals), if the polymerization was conducted with a sufficiently large UV dose. On the other hand, lipid molecules of the fluid bilayers penetrated into the polymeric bilayer domains, if the UV dose was relatively small. A direct correlation was observed between the applied UV dose and the lateral diffusion coefficient of fluorescent marker molecules in the fluid bilayers embedded within the polymeric bilayer domains. Artificial control of lateral diffusion by polymeric bilayers may lead to the creation of complex and versatile biomimetic model membrane arrays.     

Molecular dynamics study on the stabilization of dehydrated lipid bilayers with glucose and trehalose

In this study, we use molecular dynamics simulations to investigate and compare the interactions of DPPC bilayers with and without saccharides (glucose or trehalose) under dehydrated conditions. Results from the simulations indicate that unilamellar bilayers lose their structural integrity under dehydrated conditions in the absence of saccharides; however, in the presence of either glucose or trehalose, the bilayers maintain their stability. Hydrogen bond analysis shows that the saccharide molecules displace a significant amount of water surrounding the lipid headgroups. At the same time, the additional hydrogen bonds formed between water and saccharide molecules help to maintain a hydration layer on the lipid bilayer interface. On the basis of the hydrogen bond distributions, trehalose forms more hydrogen bonds with the lipids than glucose, and it is less likely to interact with neighboring saccharide molecules. These results suggest that the interaction between the saccharide and lipid molecules through hydrogen bonds is an essential component of the mechanism for the stabilization of lipid bilayers.     

Two-Dimensional polymerization of supramolecular assemblies: Synthesis and bilayer polymerization of lipids containing α-methylene-substituted acyl chains

Polymerization of lipid assemblies may be usefully employed to alter the properties of the assemblies. The possible locations of the reactive group in the lipids include (1) the chain terminus, (2) the head group, and (3) near the lipid backbone. The third strategy yields polymerized assemblies which retain their head group functionality and lipid chain motion. We have designed and synthesized new members of this later category by the use of 2-methylene-substituted acyl chains. The main transition temperature (T_m) from gel to liquid crystalline phase of hydrated bilayers of 1-palmitoyl-2-(2-methylene)palmitoyl-sn-glycero-3-phosphocholine ( 1 ) and the disubstituted 1,2-bis(2-methylenepalmitoyl)-sn-glycero-3-phosphocholine ( 2 ) were 33.6 and 25.3°C, respectively. The T_m of the mono-substituted 1-oleoyl-2-(2-methylene)palmitoyl-sn-glycero-3-phosphocholine ( 3 ) bilayers was detected in a range from ?15 to ?10°C by x-ray diffraction. Hydrated bilayers of each individual lipid were successfully polymerized with a water-soluble initiator, azobis(2-amidinopropane) dihydrochloride (AAPD). These results indicate the lipid 2-methylene groups are accessible to the water interface. Thermal polymerization of the mono-substituted lipids in aqueous suspensions with AAPD, yielded oligomers. However the bis-2-methylene PC ( 2 ) was successfully polymerized to yield stabilized crosslinked bilayers. © 1994 John Wiley & Sons, Inc.     

Homogeneity, electrical resistivity and lateral diffusion of lipid bilayers coupled to polyelectrolyte multilayers

The electrostatic coupling of charged phospholipid bilayers with polyelectrolyte multilayers is studied varying the lipid charge density, multilayer composition and preparation conditions. It is shown that in all cases the bilayer is insufficiently insulating for meaningful electrochemical studies. Homogeneity on a light microscopical length scale was obtained by two methods: vesicle fusion into bilayers and deposition from monolayers by the Langmuir–Schäfer (LB/LS) technique. Largest progress was achieved aiming for lateral diffusion comparable to an uncoupled bilayer. For this mixtures with 10% charged (DOPA) and 90% uncharged (DMPC) lipid were prepared that exhibited sufficient anchoring density and at the same time a fluid DMPC phase on going above the main phase transition at 24°C. This yielded diffusion coefficients in aqueous environment above 1 μm² s⁻¹ with almost no immobile fractions.