Enhancement in SERS intensity with hierarchical nanostructures by bimetallic deposition approach

We investigate the plasmonic enhancement arising from bimetallic (Au/Ag) hierarchical structure and address the fundamental issues relating to the design of multilayered nanostructures for surface‐enhanced Raman scattering (SERS) spectroscopy. SERS‐active nanosphere arrays with Ag underlayer and Au overlayer were systematically constructed, with the thickness of each layer altered from 40 to 320 nm. The SERS responses of the resultant bimetallic structures were measured with 2‐naphthalenethiol dye as the test sample. The results confirm the dependency of SERS enhancement on the thickness ratio (Au : Ag). Compared with Au‐arrays, our optimized bimetallic structures, which exhibit nanoprotrusions on the nanospheres, were found to be 2.5 times more SERS enhancing, approaching the enhancement factor of an Ag‐array. The elevated SERS is attributed to the formation of effective hot‐spots associated with increased roughness of the outer Au film, resulting from subsequent sputtering of Au granules on a roughened Ag surface. The morphology and reflectance studies suggest that the SERS hot‐spots are distributed at the junctions of interconnected nanospheres and over the nanosphere surface, depending on the thickness ratio between the Au and Ag layers. We show that, by varying the thickness ratio, it is possible to optimize the SERS enhancement factor without significantly altering the operating plasmon resonance wavelength, which is dictated solely by the size of the underlying nanospheres template. In addition, our bimetallic substrates show long‐term stability compared with previously reported Ag‐arrays, whose SERS efficiency drops by 60% within a week because of oxidation. These findings demonstrate the potential of using such a bimetallic configuration to morphologically optimize any SERS substrate for sensing applications that demand huge SERS enhancement and adequate chemical stability. Copyright © 2011 John Wiley & Sons, Ltd.     

A Sensitive “Optical Nose” for Detection of Volatile Organic Molecules Based on Au@MOFs Nanoparticle Arrays through Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) is an effective technique for detecting toxic gas and volatile organic molecules (VOMs); however, recent SERS-based gas sensors have disadvantages and lack an effective approach to capture toxic gas and insufficient reproducibility of SERS substrates. Herein, a facile strategy is developed to integrate metal-organic frameworks with Au nanoparticle (NP) arrays to form Au@ZIF-8 NP arrays, which can be used as an “optical nose” based on SERS to detect toxic VOMs with good reproducibility and sensitivity. Toluene as a target molecule is recognized at ppm levels by the Au@ZIF-8 NP arrays in situ. And the analytical enhancement factor of Au@ZIF-8 NP arrays for toluene is about 1.2 × 10⁵. Importantly, this SERS substrate can also detect the 1-butanol molecule, which provides an idea for designing a universal VOM sensor. In addition, the coating method of the ZIF-8 shell can be extended to synthetize various NPs@ZIF-8 core–shell composites, such as Au nanospheres@ZIF-8, Au@Ag nanorods@ZIF-8, PS microspheres@ZIF-8, and Fe₂O₃ microellipsoids@ZIF-8 composites.     

A comparative study of surface‐enhanced Raman scattering from silver‐coated anodic aluminum oxide and porous silicon

Three types of Ag‐coated arrays from porous anodic aluminum oxide (AAO) were prepared and studied as substrates for surface‐enhanced Raman scattering (SERS). They were compared with Ag‐coated porous silicon (PSi) samples. AAO‐based substrates were prepared by the vapor deposition of silver directly onto the surface of porous AAO with different morphologies of the pores, whereas SERS‐active island films on the PSi were prepared by immersion plating. The resulting metallic nanostructures were characterized by UV‐vis absorption spectroscopy and scanning electron microscopy (SEM). Thermal evaporation leads to the formation of granular arrays of Ag nanoparticles on the surface of AAO. SERS activity of the substrates was tested using water‐soluble cationic Zn(II)‐tetrakis (4‐N‐methylpyridyl) porphyrin (ZnTMPyP4) as a probe molecule. The results indicate that all AAO‐based substrates studied here exhibit some degree of SERS activity. Noteworthy, for excitation at 532 nm, signals from AAO‐based substrates were comparable with those from the PSi‐based ones, whereas for 441.6 nm excitation they were about twice higher. The strongest SERS‐enhancement at 441.6 nm excitationwas provided by the AAO substrates with silver deposited on the monolith (originally nonporous) side of AAO. Preferential SERS‐enhancement of the bands ascribed to the vibrations of the N‐methylpyridinium group of ZnTMPyP4 when going to blue excitation was found. Copyright © 2010 John Wiley & Sons, Ltd.     

Gold aggregates on silica templates and decorated silica arrays for SERS applications

In this work, we report the fabrication and characterization of size controllable gold nanoparticles (NPs) aggregates for their application in surface enhanced Raman scattering (SERS). Aggregates were prepared using two methodologies: (i) by using silica particles arrays as a template to agglomerate gold NPs between the inter-particle interstices, and (ii) by functionalizing silica particles to be used as support to graft gold nanoparticles and thus to form decorated silica particle arrays. These substrates were used in the detection of Rhodamine 6G producing an enhancement factor (EF) from 10⁴ to 10⁶ that is associated to the increment of hot spot (HS) sites, and the fact that plasmon resonance from aggregates and absorption wavelength of test molecules are closely in resonance with excitation wavelength. The EF was also reduced when the plasmon resonance was red-shifted as a result of the increment of aggregate size. In spite of this, the EF is high enough to make these SERS substrates excellent candidates for sensing applications.     

Comparison of SERS effectiveness of copper substrates prepared by different methods: what are the values of enhancement factors?

Surface‐enhanced Raman scattering (SERS) spectroscopy is an analytical method for the detection of low amounts of analytes adsorbed on an appropriate coinage metal (Au, Ag, Cu) surface. Generally, the values of the enhancement factor are the highest on silver, lower on gold and relatively very low on copper. In this study, we have focused on the estimation of the enhancement factors of copper surface/substrates formed by different preparation procedures. The SERS activity of large electrochemically prepared substrates and colloidal systems is compared. The surface morphology of the large substrates was studied using scanning electron microscopy and atomic force microscopy. The size distribution of colloidal nanoparticles was monitored by dynamic light scattering. The values of enhancement factor are in both cases more than 10⁵ for the FT‐SERS spectra, demonstrating the fundamental role of nanostructured copper as a substrate material at the excitation wavelength (1064 nm) used. Copyright © 2011 John Wiley & Sons, Ltd.     

Electrochemically fabricated nanovolcano arrays for SERS applications

Nanovolcano arrays were fabricated by electrodepositing Ni/Cu alloys into a monolayer of self‐assembled nanospheres and then electrochemically etching the deposited alloy film. The fabricated nanovolcano arrays feature highly ordered hexagonally arranged concave nanobowls decorated with triangular nanopores at their interstices. After coated with Ag, the nanovolcano arrays serve as high‐performance substrates for surface enhancement Raman spectroscopy (SERS) measurements. The experimental study shows that the structural features of the nanovolcano arrays, including concave nanobowls, nanopores, and their long‐range orders, all contribute to the observed strong SERS enhancement in a synergetic manner, which is further confirmed by the simulation results obtained using the finite‐difference time‐domain method. Copyright © 2012 John Wiley & Sons, Ltd.     

Improved performances on surface‐enhanced Raman scattering based on electrochemically roughened gold substrates modified with SiO2 nanoparticles

In this work, we use electrochemical oxidation–reduction cycles (ORC) methods to prepare surface‐enhanced Raman scattering (SERS)‐active gold substrates modified with SiO₂ nanoparticles to improve the corresponding SERS performances. Based on the modified substrates, the SERS of Rhodamine 6G (R6G) exhibits a higher intensity by 3‐fold of magnitude, as compared with that of R6G adsorbed on a SERS‐active Au substrate without the modification of SiO₂ nanoparticles. Moreover, the SERS enhancement capabilities of the modified and the unmodified Au substrates are seriously destroyed at temperatures higher than 250 and 200 °C, respectively. These results indicate that the modification of SiO₂ nanoparticles can improve the thermal stability of SERS‐active substrates. The aging in SERS intensity is also depressed on this modified Au substrate due to the contribution of SiO₂ nanoparticles to SERS effects. Copyright © 2009 John Wiley & Sons, Ltd.     

Multiscale electromagnetic SERS enhancement on self‐assembled micropatterned gold nanoparticle films

In this work, we demonstrate a cascaded, multiplicative electromagnetic enhancement effect in surface‐enhanced Raman scattering (SERS) on periodically micropatterned films made of colloidal gold nanoparticles, prepared by a self‐assembly approach, without implying lithography procedures. The multiplicative enhancement effect is obtained by combining surface plasmon near‐field enhancement due to nanoscale features with far‐field photonic coupling by periodic microscale features. The effect is observed for both internal Raman reporters (molecules attached to the Au colloids before their assembly) and external Raman probes (molecules adsorbed on the samples after film assembly). The ability of the patterned films for far‐field light coupling is supported by reflectivity spectra, which present minima/maxima in the visible spectral range. Finite‐difference time‐domain computer simulations of the electric field distribution also support this interpretation. The fabricated dual‐scale SERS substrates exhibit a good spot‐to‐spot reproducibility and time stability, as proved by the SERS response over a time scale longer than 1 month. The experimental demonstration of this cascaded electromagnetic enhancement effect contributes to a better understanding of SERS and can affect future design of SERS substrates. Moreover, such dual‐scale colloidal films prepared by convective self‐assembly can be of general interest for the broader field of nanoparticle‐based devices. Copyright © 2014 John Wiley & Sons, Ltd.     

Silver nanostructure arrays abundant in sub-5 nm gaps as highly Raman-enhancing substrates

Two types of highly Raman-enhancing arrays substrates were fabricated using anodic aluminum oxide (AAO) templates by controlling the AAO template temperature and evaporated silver thickness during e-beam evaporating: complex patterned Ag nanoparticle arrays abundant in sub-5 nm gaps (type I); hexagonal Ag nanopore arrays (type II). The surface enhanced Raman scattering (SERS) enhancement factors (EF) of both substrates are estimated experimentally to exceed 10⁵, especially that of type I reaches 10⁷ due to the existence of numerous sub-5 nm gaps. The simulation using finite-difference time-domain (FDTD) method confirmed that gap effect has significantly improved the substrates’ SERS activity.     

SERS enhancement of gold nanospheres of defined size

Monodisperse, citrate‐stabilized gold nanoparticles of sizes ranging from 15 to 40 nm were synthesized and characterized by small angle X‐ray scattering and UV‐vis experiments. Identical surface properties of nanoparticles of different sizes to avoid variation in the chemical surface‐enhanced Raman scattering (SERS) enhancement, as well as selection of experimental conditions so that no aggregation took place, enabled the investigation of enhancement of individual nanospheres. Enhancement factors (EFs) for SERS were determined using the dye crystal violet (CV). EFs for individual gold nanospheres ranged from 10² to 10³, in agreement with theoretical predictions. An increase of the EFs of individual spheres with size can be correlated to changes in the extinction spectra of nanoparticle solutions. This confirms that the increase in enhancement with increasing size results from an increase in electromagnetic enhancement. Beyond this dependence of EFs of isolated gold spheres on their size, EFs were shown to vary with analyte concentration as a result of analyte‐induced aggregation. This has implications for the application of nanoparticle solutions as SERS substrates in quantitative analytical tasks. Copyright © 2011 John Wiley & Sons, Ltd.     

Physical mechanisms behind the SERS enhancement of pyramidal pit substrates

In this paper we theoretically consider the physical mechanisms behind the surface‐enhanced Raman scattering (SERS) enhancement produced by commercially available Klarite substrates, which consist of rectangular arrays of micrometre‐sized pyramidal pits in silicon with a thin gold coating. Full three‐dimensional numerical simulations of the pits are conducted for both a real gold metal coating and a perfect electrical conductor (PEC) to determine whether the SERS enhancement is due to diffraction or plasmon effects. The pit apex angle and metal coating thickness are also varied to determine whether it is possible to further enhance the SERS signal by optimising the structural parameters of these substrates. By decreasing the film thickness and adjusting the apex angle, it is possible to achieve an enhancement almost double that of a standard Klarite substrate. Copyright © 2010 John Wiley & Sons, Ltd.     

Sensitive and Reliable SERS Substrates Based on Hierarchical Nanoparticle Arrays Fabricated by Confined Spheroidization

Substrates with complex and hierarchical nanostructure are widely investigated in surface‐enhanced Raman scattering (SERS), but it remains challenging to improve the structural uniformity and stability. Herein, a novel method is proposed: confined spheroidization. Unique configurations of hierarchical metallic nanoparticle arrays (HMNA) are successfully fabricated by confined spheroidizing on anodic aluminum oxide templates. By utilizing the confined effect of the holes, a series of large particles inside the hole and small particles arranged on the hole wall are obtained after thermal annealing. The size and distribution of nanoparticles strongly depend on the hole size, the thickness of the hole wall, and the deposition thickness of metal layer. COMSOL simulations demonstrate good SERS activity of the HMNA, with a low detection limit of ≈10^?8 m for crystal violet (CV) and the enhancement factor of ≈ 4.97 × 10⁷ at the 1160 cm^?1 mode of CV. The relative standard deviation of 6.23% from 59 random spots and a 9.24% signal variation among ten substrates are achieved, showing good SERS signal reproducibility of the HMNA. This simple and low‐cost technique makes it possible to prepare 3D hierarchical ordered micro–nanostructures by one‐step, showing prospect applications in SERS‐based detection and plasmonic materials.     

Silver‐decorated carbon nanotube networks as SERS substrates

We report on investigations upon a surface‐enhanced Raman scattering (SERS) substrate produced from a two‐dimensional single‐walled carbon nanotube (SWNT) network decorated with Ag nanoparticles. Using the strong and unique Raman spectrum of SWNTs as a reference, the SWNT/Ag nanostructure can be considered to provide two regions: one with an ultrasensitive SERS response for single‐molecule SERS (SMSERS) study; and another with uniform SERS enhancement over an area of several square millimeters for general SERS measurements. We report the appearance of an anomalous Raman feature at around 2180 cm⁻¹ in the high‐sensitivity region which exhibits the characteristics of SMSERS. The SERS performance of the uniform area was characterized using pyridine vapor adsorbed onto the substrate. The presence of the SWNT/Ag nanostructure enhanced the Raman intensity by over seven orders of magnitude, a factor comparable to or exceeding that obtained on SERS substrates reported by other groups. The results indicate great potential to produce highly sensitive, uniform SERS substrates via further fine‐tuning of the nanostructure. Copyright © 2011 John Wiley & Sons, Ltd.     

Large‐area Ag nanorod array substrates for SERS: AAO template‐assisted fabrication,functionalization, and application in detection PCBs

Highly ordered arrays of thiolated β‐cyclodextrin (HS‐β‐CD) functionalized Ag‐nanorods (Ag‐NRs) with plasmonic antennae enhancement of electrical field have been achieved for encapsulation and rapid detection of polychlorinated biphenyls (PCBs). The large‐area ordered arrays of rigid Ag‐NRs supported on copper base were fabricated via porous anodic aluminum oxide (AAO) template‐assisted electrochemical deposition. The inter‐nanorod gaps between the neighboring Ag‐NRs were tuned to sub‐10 nm by thinning the pore‐wall thickness of the AAO template using diluted H₃PO₄. The nearly perfect large‐area ordered arrays of Ag‐NRs supported on copper base render these systems excellent in surface‐enhanced Raman scattering (SERS) performance with uniform electric field enhancement, as testified by the SERS spectra and Raman mappings of rhodamine 6 G. Furthermore, the Ag‐NRs were functionalized with HS‐β‐CD molecules so as to capture the apolar PCB molecules in the hydrophobic cavity of the CD. Compared to the ordinary undecorated SERS substrates, the HS‐β‐CD modified Ag‐NR arrays exhibit better capture ability and higher sensitivity in rapid detection of PCBs. Copyright © 2012 John Wiley & Sons, Ltd.     

Highly efficient silver particle layers on glass substrate synthesized by the sonochemical method for surface enhanced Raman spectroscopy purposes

A fast method for preparing of silver particle layers on glass substrates with high application potential for using in surface enhanced Raman spectroscopy (SERS) is introduced. Silver particle layers deposited on glass cover slips were generated in one-step process by reduction of silver nitrate using several reducing agents (ethylene glycol, glycerol, maltose, lactose and glucose) under ultrasonic irradiation. This technique allows the formation of homogeneous layers of silver particles with sizes from 80 nm up to several hundred nanometers depending on the nature of the used reducing agent. Additionally, the presented method is not susceptible to impurities on the substrate surface and it does not need any additives to capture or stabilize the silver particles on the glass surface. The characteristics of prepared silver layers on glass substrate by the above mentioned sonochemical approach was compared with chemically prepared ones. The prepared layers were tested as substrates for SERS using adenine as a model analyte. The factor of Raman signal enhancement reached up to 5·10⁵. On the contrary, the chemically prepared silver layers does not exhibit almost any pronounced Raman signal enhancement. Presented sonochemical approach for preparation of silver particle layers is fast, simple, robust, and is better suited for reproducible fabrication functional SERS substrates than chemical one.     

Nanofabricated periodic arrays of silver elliptical discs as SERS substrates

Signal enhancement observed in surface‐enhanced Raman spectroscopy (SERS) is attributable to the presence of noble‐metal nanostructures on substrate surfaces. The rational development of SERS‐active substrates depends critically on the homogeneity and intensity of surface plasmon resonances, properties that are strongly dependent on both the morphology and dielectric properties of the metals and composite materials making up the SERS substrates. Enhancement can be controlled by the shape, size, and spacing of metallic nanoparticles. Previous studies in our group have shown that arrays of elliptical nanodiscs have promising geometries for this purpose. Using electron beam lithography (EBL), we fabricate close‐packed arrays of these discs with lateral dimensions ranging from 300:50 to 300:300 nm (long axis : short axis). The arrays are composed of a negative photoresist that, once the lithography process is complete, are coated with a noble metal through physical vapor deposition (PVD). In this work, optimum thickness and deposition rate of noble metal are determined for these substrates. The lithographically produced nanopatterns are studied by Raman spectroscopy to examine the effect of altering the elliptical aspect ratio on SERS activity, while scanning electron microscopy (SEM) is used to examine pattern surfaces post lithographic development and post noble‐metal deposition. Atomic force microscopy (AFM) is used to inspect the roughness of substrate surfaces. Reproducibility between different arrays of the same pattern ranges from 12 to 28%. Homogeneity of our uniform‐morphology EBL/PVD‐fabricated substrates is examined and compared to our random‐morphology polymer nanocomposite substrates. Using rhodamine 6G as an analyte, an increase in SERS signal is noted as the aspect ratio of ellipses goes from 6:1 to 6:6. Our experimental data, in terms of trends in SERS activity, correlate with trends in field enhancements calculated using a simple electrostatic model and with the magnitude of the broad red‐shifted spectral continuum observed for the substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

Near‐field optical enhancement by lead‐sulfide quantum dots and metallic nanoparticles for SERS

There is a growing interest in using quantum dots (QDs) and metallic nanoparticles (NPs), both for luminescence enhancement and surface‐enhanced Raman scattering (SERS). Here, we study the electromagnetic‐field enhancement that can be generated by lead‐sulfide (PbS) QDs using three‐dimensional finite‐element simulations. We investigate the field enhancement associated with combinations of PbS QDs with metallic NPs and substrates. The results show that high field enhancement can be achieved by combining PbS QDs with metallic NPs of larger sizes. The ideal size for Ag NPs is 25 nm, providing a SERS enhancement factor of ~5*10⁸ for light polarization parallel to the NP dimer axis and a gap of 0.6 nm. For Au NPs, the bigger the size, the higher is the field for the studied diameters, up to 50 nm. The near‐field values for PbS QDs above metallic substrates were found to be lower compared to the case of PbS QD‐metal NP dimers. This study provides the understanding for the design and application of QDs for the enhancement of near‐field phenomena. Copyright © 2013 John Wiley & Sons, Ltd.     

High performance Au/Ag core/shell bipyramids for determination of thiram based on surface‐enhanced Raman scattering

Au/Ag core/shell bipyramids were used as surface‐enhanced Raman scattering (SERS) substrates to determine the thiram. The metallic substrates showed high SERS performance and are very suitable for the analytical sensors. The fabrication and characterization of the Au/Ag core/shell bipyramids were described. The influence of experimental parameters, such as the thickness of Ag shell of the bipyramids, sodium chloride concentration, and pH value on SERS of thiram was examined and optimized. Under the optimum conditions, thiram molecules were effectively adsorbed onto bipyramids and the SERS intensity is proportional to the concentration of thiram in the range of 3.3 to 400.0 ng mL^–1. The corresponding correlation coefficient of the linear equation is 0.997, which indicates that there is a good linear relationship between SERS intensity and thiram concentration. The limit of detection for thiram is 2.0 ng mL^–1. The experimental results indicate that the proposed method is a viable method for determination of thiram. Some environmental water samples were analyzed and the analytical results were satisfactory. Copyright © 2012 John Wiley & Sons, Ltd.     

SERS active Ag nanoparticles in mesoporous silicon: detection of organic molecules and peptide–antibody assays

Ag nanoparticles synthesized on porous silicon samples were studied and applied as substrates for surface‐enhanced Raman scattering (SERS). The metallic nanostructures prepared by immersion plating were characterized by UV–Vis reflectance spectroscopy and scanning electron microscopy. SERS activity of the substrates was tested using Cyanine dye 1,3,3,1′,3′,3′‐esamethyl‐5,5′‐dimethoxyindodicarbocyanine iodide (Cy5‐OCH₃) as a probe molecule. The Raman spectra obtained for different excitation wavelengths indicate amplifications ascribed to plasmonic resonances with an enhancement factor up to 10⁷. CGIYRLRS peptides were chemisorbed on the Ag nanoparticles with the plasmonic resonance tuned at the excitation energy. Such oligopeptides were used as baits for a specific polyclonal antibody. The overall Raman enhancement allowed to evidence a good selectivity to the target analyte as required by most of the SERS applications on biological assays. Copyright © 2011 John Wiley & Sons, Ltd.     

Enhancements in intensity and thermal stability of Raman spectra based on roughened gold substrates modified by underpotential deposition of silver

In this study, electrochemically roughened gold is modified with underpotential deposition (UPD) silver to investigate the effects on enhancements in the intensity and the thermal stability of surface‐enhanced Raman scattering (SERS). The SERS of Rhodamine 6G (R6G) adsorbed on the UPD Ag‐modified Au substrate exhibits a higher intensity by six‐fold of magnitude, as compared with that of R6G adsorbedon the unmodified Au substrate. Moreover, the SERS enhancement capabilities of UPD Ag‐modified Au and unmodified Au substrates are seriously depressed at temperatures higher than 200 and 150 °C, respectively. It indicates that the modification of UPD Ag can significantly depress the thermal destruction of SERS‐active substrates. Copyright © 2009 John Wiley & Sons, Ltd.