SERS as a probe for adsorbate orientation on silver nanoclusters

Surface‐enhanced Raman scattering (SERS) spectroscopy has been used to characterize multilayers of three isomeric aromatic compounds adsorbed on silver nanoclusters. The three structural isomers, all of which adsorb in the carboxylate form onto the silver nanoclusters, bind in two different geometries to the silver surface. Different molecular configurations correlate to differences in bonding strength of these molecules to the silver surface, which can be probed by SERS. For ortho‐hydroxybenzoic acid (salicylic acid), we observed red shifts of major SERS peaks in comparison to the normal Raman vibrations of nonadsorbed crystalline material. For this molecule the steric hindrance between the adjacent carboxylate and hydroxyl groups causes the carboxylate group to rotate from the common flat geometry of benzene substituents on surfaces and bond directly through one of the oxygen atoms to the surface. In this case, strong coordinative bonding between the carboxylate group and the metal surface causes the red shifts in the SERS peaks. For para‐, and meta‐hydroxybenzoic acid, the steric hindrance is less likely since the two functional groups are not at adjacent positions, and therefore these molecules adsorb on the silver surface in a totally flat geometry. For these molecules, in contrast to the ortho isomer, the CO₂ interacts with the surface through an extended π bond, and these molecules are physically adsorbed in the common flat position. Therefore, for the meta and para substituents, we do not observe significant red shifts in the SERS spectrum. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation of SERS active Ag nanoparticles encapsulated by phospholipids

A cost‐effective way of fabricating lipid‐coated surface‐enhanced Raman spectroscopy (SERS) substrate having reproducible high SERS activity was proposed. Ag nanoparticle embedded in 1,2‐dioleoyl‐sn‐glycero‐3‐phosphocholine (DOPC) and 1,2‐dioleoyl‐3‐trimethylammonium‐propane (DOTAP) membranes was produced by direct deposition of a 5‐nm‐thick layer of Ag onto the solid‐supported phospholipid membrane, and subsequent dissolution of the Ag nanoparticle‐embedded membrane in iso‐octane allowed easy one‐pot fabrication of DOPC‐ or DOTAP‐coated Ag nanoparticles. In particular, DOTAP produced nearly monodisperse lipid‐encapsulated Ag nanoparticles (9 nm in diameter) exhibiting reproducible high SERS activity (detecting up to 10 nM of rhodamine 6G and 0.5 μM of glutathione). In addition, the process was modified to incorporate variety of Raman active molecules (rhodamine 6G, malachite green, 4‐aminothiopheonol, 4‐mercaptopyridine) into the particle‐encapsulating lipid bilayer. The DOTAP/Raman dye‐coated Ag nanoparticles also generated high SERS activity to enable potential application of the DOTAP/Raman dye‐coated Ag nanoparticles feasible in different areas. Copyright © 2014 John Wiley & Sons, Ltd.     

Novel highly sensitive Cu‐based SERS platforms for biosensing applications

Novel surface enhanced Raman spectroscopy (SERS) platforms have been prepared and used for the bacteria detection. Unlike typical, expensive SERS platforms prepared from gold or silver, the presented platforms are prepared using copper. A new, simple, cost‐efficient and fast high pressure method is used for platform fabrication, through the decomposition of copper hydride. The platform enhancement factors are verified using the malachite green isothiocyanate as a standard. The platforms exhibit extremely high SERS enhancement factors depending on pressure used for their preparation. The calculated enhancement factors have been found in the range between 1.5 × 10⁶ and 4.6 × 10⁷. The SERS spectra reproducibility is established both across a single platform and among different platforms. The average spectral correlation coefficient (Γ) has been calculated to be 0.82. Fully characterized SERS platforms have then been used for detecting Staphylococcus aureus bacteria. These novel platforms have great potential to become excellent tools for biological or medical diagnostics as an alternative to more common silver or gold SERS platforms. Copyright © 2015 John Wiley & Sons, Ltd.     

Nanofabricated periodic arrays of silver elliptical discs as SERS substrates

Signal enhancement observed in surface‐enhanced Raman spectroscopy (SERS) is attributable to the presence of noble‐metal nanostructures on substrate surfaces. The rational development of SERS‐active substrates depends critically on the homogeneity and intensity of surface plasmon resonances, properties that are strongly dependent on both the morphology and dielectric properties of the metals and composite materials making up the SERS substrates. Enhancement can be controlled by the shape, size, and spacing of metallic nanoparticles. Previous studies in our group have shown that arrays of elliptical nanodiscs have promising geometries for this purpose. Using electron beam lithography (EBL), we fabricate close‐packed arrays of these discs with lateral dimensions ranging from 300:50 to 300:300 nm (long axis : short axis). The arrays are composed of a negative photoresist that, once the lithography process is complete, are coated with a noble metal through physical vapor deposition (PVD). In this work, optimum thickness and deposition rate of noble metal are determined for these substrates. The lithographically produced nanopatterns are studied by Raman spectroscopy to examine the effect of altering the elliptical aspect ratio on SERS activity, while scanning electron microscopy (SEM) is used to examine pattern surfaces post lithographic development and post noble‐metal deposition. Atomic force microscopy (AFM) is used to inspect the roughness of substrate surfaces. Reproducibility between different arrays of the same pattern ranges from 12 to 28%. Homogeneity of our uniform‐morphology EBL/PVD‐fabricated substrates is examined and compared to our random‐morphology polymer nanocomposite substrates. Using rhodamine 6G as an analyte, an increase in SERS signal is noted as the aspect ratio of ellipses goes from 6:1 to 6:6. Our experimental data, in terms of trends in SERS activity, correlate with trends in field enhancements calculated using a simple electrostatic model and with the magnitude of the broad red‐shifted spectral continuum observed for the substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

SERS detection of proteins on micropatterned protein‐mediated sandwich substrates

One of the greatest challenges in developing protein chips is the detection of trace amounts of proteins on their surfaces. Traditionally employed techniques, such as optical microscopy and fluorescence, are effective and widely used, but it is sometimes hard to obtain fingerprint signals of biomolecules. In this paper, we use surface‐enhanced Raman scattering (SERS) spectroscopy as a platform for protein detection. Micropatterned protein‐mediated Au/Ag sandwich structures were employed as the detecting objects. Two types of proteins, pure hemoprotein and immunocomplex, were used as the media. Au/Ag layers were used as the SERS substrates. The resulting spectra showed good sensitivity and resolution. It indicates that SERS is a powerful tool in protein detection and has great potential for application in protein chips. Copyright © 2011 John Wiley & Sons, Ltd.     

Site‐specific deposition of Ag nanoparticles on ZnO nanorod arrays via galvanic reduction and their SERS applications

A controllable heterostructure consisting of ZnO nanorod arrays with attached Ag nanoparticles at only one end has been synthesized via a facile and convenient galvanic reduction method. Scanning electron microscopic images of these nanostructures showed good selectivity of Ag deposition on the tip of ZnO nanorod arrays. The formation of these regular Ag ZnO heterogeneous nanorod arrays can be explained by a localization of the electrons at the ends of the ZnO nanorods after the electron transfer step. By tuning the reaction time and the concentration of silver nitrate, the density of Ag nanoparticles on the tip of ZnO nanorods can be well controlled. Owing to the introduction of Ag nanoparticles with different densities, the resulting Ag ZnO heterogeneous nanorod arrays have been proved to be a versatile substrate for surface‐enhanced Raman scattering not only for common organic molecules but also for label‐free protein detection. Copyright © 2009 John Wiley & Sons, Ltd.     

Substituent effect on structure and surface activity of N‐methylpyridinium salts studied by FT‐IR,FT‐RS,SERS and DFT calculations

The substituent effect on structure and surface activity of mono‐ and disubstituted N‐methylpyridinium salts was investigated by means of Raman, infrared and surface‐enhanced Raman spectroscopy (SERS). The significant differences observed in Raman and infrared spectra have been correlated with marker bands assigned to in‐plane and out‐of‐plane vibrations, respectively. This vibrational analysis, complemented by quantum chemical calculations (B3LYP/6‐311++G(d,p)) was a basis for investigation of the surface activity of the studied compounds. Significant differences in their SERS spectra related to the enhancement mechanism and adsorbate orientation have been observed and analyzed. Copyright © 2012 John Wiley & Sons, Ltd.     

Design considerations for SERS detection in colloidal solution: reduce spectral intensity fluctuation

The intensity fluctuation of surface‐enhanced Raman scattering (SERS) has seriously hampered its practical applications. The previous studies that involved SERS intensity fluctuation mostly focus on the assembled substrates or single molecule and single nanoparticle but have few attention on colloidal solutions containing numerous molecules and/or nanoparticles. Here, we studied the time‐elapsed SERS spectra of three different analytes in colloidal solution. Their peak intensities fluctuated simultaneously and uniformly throughout the acquisition process and had no correlation with their wavenumber wandering. Gravity‐induced inhomogeneous distributions of Ag nanocubes in solution led to the spatial and temporal variations of peak intensities, which could be reduced by altering the integration time, particle concentration, and solvent viscosity and density. Furthermore, the dissimilar interactions between analytes and Ag nanocubes showed non‐detectable influence over their intensity fluctuations. This investigation gives out the significant guidance for SERS detection in colloidal solution. Copyright © 2015 John Wiley & Sons, Ltd.     

Multiscale electromagnetic SERS enhancement on self‐assembled micropatterned gold nanoparticle films

In this work, we demonstrate a cascaded, multiplicative electromagnetic enhancement effect in surface‐enhanced Raman scattering (SERS) on periodically micropatterned films made of colloidal gold nanoparticles, prepared by a self‐assembly approach, without implying lithography procedures. The multiplicative enhancement effect is obtained by combining surface plasmon near‐field enhancement due to nanoscale features with far‐field photonic coupling by periodic microscale features. The effect is observed for both internal Raman reporters (molecules attached to the Au colloids before their assembly) and external Raman probes (molecules adsorbed on the samples after film assembly). The ability of the patterned films for far‐field light coupling is supported by reflectivity spectra, which present minima/maxima in the visible spectral range. Finite‐difference time‐domain computer simulations of the electric field distribution also support this interpretation. The fabricated dual‐scale SERS substrates exhibit a good spot‐to‐spot reproducibility and time stability, as proved by the SERS response over a time scale longer than 1 month. The experimental demonstration of this cascaded electromagnetic enhancement effect contributes to a better understanding of SERS and can affect future design of SERS substrates. Moreover, such dual‐scale colloidal films prepared by convective self‐assembly can be of general interest for the broader field of nanoparticle‐based devices. Copyright © 2014 John Wiley & Sons, Ltd.     

Self‐assembly and structure formation in liquid crystalline phthalocyanine thin films studied by Raman spectroscopy and AFM

This work presents an investigation of films prepared by doctor blade casting, the formation of self‐assembled microstructures of a liquid crystalline phthalocyanine with highly oriented molecules. Raman Spectroscopy in combination with atomic force microscopy is applied to study the structures within the films. By keeping the substrate at room temperature or at 353 K during coating, different geometric structures namely rods and islands form. Rod‐like structures are growing in coating direction, whereas directional growth of the islands is not observed. The distribution of the rod lengths varies widely, whereas the width appears more uniform. Annealing of the samples shows a different behavior of the two textures. Islands tend to melt, and rods smooth their structural form, which is extracted from Raman imaging in combination with atomic force microscopy. Additionally, Raman imaging gives insight into laterally different relative crystallinity. These observations are discussed in the context of the molecular orientation as probed by polarized Raman spectroscopy. These polarized Raman spectra indicate azimuthal alignment of the molecules within the rods (edge on alignment). This alignment occurs along and also perpendicular to the growth direction. In contrast to the alignment in the rods, the molecules inside the islands occurring at higher temperature do not show preferential molecular orientation. After annealing, no preferential molecular orientation is observed in rods because of the loss of anisotropy, too. Copyright © 2012 John Wiley & Sons, Ltd.     

Immobilization of galactose oxidase on self‐assembled monolayers of thiols on Au and Ag surfaces

Galactose oxidase (GalOD) was immobilized on self‐assembled monolayers of thiols on silver and gold surfaces using trans‐stilbene (4,4′‐diisothiocyanate)‐2,2′disulphonic acid (DIDS) as the bridging compound. DIDS is the symmetrical bifunctional reagent that reacted with the amine moiety of the thiol and with primary amino groups of enzyme. The Raman measurement revealed that onto cysteamine‐modified silver and gold electrodes, bands corresponding to the galactose oxidase (about 694, 1076, 1274 cm^—1 on Au and 762, 1058, 1274 cm^–1 on Ag ) appeared and clearly demonstrated its immobilization onto Au and Ag surfaces. Simultaneously, we have also observed changes in the ratio of trans–gauche conformers of adsorbed cysteamine molecules. Layers revealing high content of trans conformer are transformed into layers composed mainly of cysteamine molecule in gauche conformation after galactose oxidase adsorption. These observations deliver a strong support for enzyme immobilization on cysteamine‐modified gold and silver surfaces. The surface plasmon resonance experiment gave a surface coverage of ~8.4 × 10⁷ g/cm² for gold electrode modified cysteamine using DIDS chemistry and 1.1 × 10⁷ g/cm² for the cysteamine only modified gold substrate and demonstrated that galactose oxidase layers immobilized with DIDS coupling reagent are quite stable and cannot be easily removed from the surface by treatment with a buffer solution. The surface plasmon resonance results indicated that in this method, a multilayer of galactose oxidase have been immobilized. Our new method of covalent attachment of enzymes seems to be quite promising as a new way of manufacturing biosensors. Copyright © 2012 John Wiley & Sons, Ltd.     

SERS enhancement of gold nanospheres of defined size

Monodisperse, citrate‐stabilized gold nanoparticles of sizes ranging from 15 to 40 nm were synthesized and characterized by small angle X‐ray scattering and UV‐vis experiments. Identical surface properties of nanoparticles of different sizes to avoid variation in the chemical surface‐enhanced Raman scattering (SERS) enhancement, as well as selection of experimental conditions so that no aggregation took place, enabled the investigation of enhancement of individual nanospheres. Enhancement factors (EFs) for SERS were determined using the dye crystal violet (CV). EFs for individual gold nanospheres ranged from 10² to 10³, in agreement with theoretical predictions. An increase of the EFs of individual spheres with size can be correlated to changes in the extinction spectra of nanoparticle solutions. This confirms that the increase in enhancement with increasing size results from an increase in electromagnetic enhancement. Beyond this dependence of EFs of isolated gold spheres on their size, EFs were shown to vary with analyte concentration as a result of analyte‐induced aggregation. This has implications for the application of nanoparticle solutions as SERS substrates in quantitative analytical tasks. Copyright © 2011 John Wiley & Sons, Ltd.     

Fiber optic probes for linear and nonlinear Raman applications – Current trends and future development

This review focuses on fiber optic probes for linear and nonlinear Raman spectroscopy, especially for medical applications. It aims at providing an overview over contemporary technology, recent first clinical trials, and helps identifying future developments necessary to bring the emerging technology to clinical end users. After a short introduction to linear and nonlinear Raman spectroscopic modalities, general design considerations will be discussed and compared to common fiber probe setups. Subsequently, examples for medical applications of fiber optic Raman probes will be given concentrating on probes for linear Raman spectroscopy as these devices are technologically more mature compared to their counterparts based on nonlinear Raman spectroscopy. The review also includes a brief summary of first multimodal fiber optic probes and highlights their benefits for clinical applications. Finally, probes are introduced which employ either nonlinear Raman spectroscopy or surface enhanced spectroscopy.     

A new‐type dynamic SERS method for ultrasensitive detection

In this study, we proposed a simple and ultrasensitive approach called dynamic surface‐enhanced Raman spectroscopy, which has been experimentally and theoretically demonstrated. The signal for rhodamine 6G is at least four orders of magnitude higher than that for the traditional method. A series of experiments have been exploited so as to verify the universality of our strategies. The results highlight a rapid and effective method in addictive narcotics residue apparatus, pesticide residue, crime scene or other public security field. Copyright © 2012 John Wiley & Sons, Ltd.     

单晶金微米片的电磁场增强及伴随的SERS效应

我们通过SERS的方法研究了单个金微米片表面不同区域的电磁场增强。首次对单个金属粒子采用拉曼区域成像的方法为电磁场增强提供了直接的实验证据。用结晶紫作为探针分子,通过对金微米六边形及截断的金微米三角形的SERS研究,直接证明金属粒子的边和角比面的电磁场增强更强。排除分子吸附、杂质干扰、晶体缺陷、表面活性剂等因素的影响,最后得出金微米片上电磁场增强的强弱顺序是角#边#面。     

Influence of backbone length and synthetic mutations on orientation of neurotensin fragments adsorbed onto a colloidal silver surface: SERS studies

Neurotensin (NT) is a naturally occurring neurotransmitter that mediates the metabotropic seven‐transmembrane G protein‐coupled receptors, namely NTR1s, richly expressed on tumor surface. Therefore, mutated active molecular fragments of NT that possess selective antagonist or weak agonist properties and the high affinity to NTR1 have attracted considerable interest for use in thrombus, inflammation, and imaging/treatment of tumors. In this work, SERS spectra of three N‐terminal fragments of human NT (NT^1‐6, NT^1‐8, and NT^1‐11) and six specifically mutated C‐terminal fragments of human NT, including NT^8‐13, [Dab⁹]NT^8‐13, [Lys⁸,Lys⁹]NT^8‐13, [Lys⁸‐(®)‐Lys⁹]NT^8‐13, [Lys⁹,Trp¹¹,Glu¹²]NT^8‐13, and NT^9‐13, adsorbed onto nanometer‐sized colloidal silver particles in an aqueous solution at pH level of the solution 2 are presented. A comparison was made between the structures of the native and mutated fragments to determine how changes in peptide length and mutations of the structure influenced the NT adsorption properties. Based on the interpretation of the obtained data, we showed that all of the investigated NT fragments, excluding [Lys⁹,Trp¹¹,Glu¹²]NT^8‐13, tended to adsorb on the silver surface mainly through the L‐tyrosine residue and the carboxylate group. The Tyr ring lied more‐or‐less flat on the silver surface. The hydrogen atom from the phenol group dissociated upon binding. On the other hand, [Lys⁹,Trp¹¹,Glu¹²]NT^8‐13 bound to this substrate through the close to vertical co‐pyrrole ring of the indole ring (Trp¹¹) and –COO^‐ . Comparison of the presented data with those obtained earlier for NT allows to suggest that in the case of naturally occurring neurotensin, both Tyr residues together with the carboxylate group play crucial role in the binding to the nanometer‐sized colloidal silver particles. This geometry of binding forces the NT molecule to lay flat on the surface. Copyright © 2012 John Wiley & Sons, Ltd.     

Plasmon‐enhanced polarized Raman spectroscopy for sensitive surface characterization

Local‐mode and localized surface plasmons generated on the silver thin film can selectively enhance the Raman signal from the surface. Further improvement of surface signal can be obtained by using the polarized Raman technique that results in a dramatic enhancement of the surface sensitivity by up to 25.4 times as compared to that without a silver coating. This technique will be very useful for Raman study on samples that suffer overlapping background signal. In this article, we show that it can be used to significantly improve the signal of thin strained‐Si layer on top of SiGe buffer layer. Copyright © 2008 John Wiley & Sons, Ltd.     

Concentric toroids as a wideband and efficient substrate for surface-enhanced Raman spectroscopy applications

Designing a structure having high local field enhancement, wideband resonance, and large hot spot area is the key element to obtain a large enhancement factor for surface-enhanced Raman spectroscopy applications. Here, the concentric toroid structures in dimer configuration is proposed, which shows a large local field intensity in a wide spectral range and the region that leads to a high-surface-enhanced Raman scattering signal intensity. Calculations show that the average surface-enhanced Raman scattering enhancement is up to 60 times more compared to the conventional dimer toroid structures with similar size.     

Understanding tip‐enhanced Raman spectra of biological molecules: a combined Raman,SERS and TERS study

Although conventional Raman, surface‐enhanced Raman (SERS) and tip‐enhanced Raman spectroscopy (TERS) have been known for a long time, a direct, thorough comparison of these three methods has never been carried out. In this paper, spectra that were obtained by conventional Raman, SERS (on gold and silver substrates) and TERS (in ‘gap mode’ with silver tips and gold substrates) are compared to learn from their differences and similarities. Because the investigation of biological samples by TERS has recently become a hot topic, this work focuses on biologically relevant substances. Starting from the TER spectra of bovine serum albumin as an example for a protein, the dipeptides Phe–Phe and Tyr–Tyr and the tripeptide Tyr–Tyr–Tyr were investigated. The major findings were as follows. (1) We show that the widely used assumption that spectral bands do not shift when comparing SER, TER and conventional Raman spectra (except due to binding to the metal surface in SERS or TERS) is valid. However, band intensity ratios can differ significantly between these three methods. (2) Marker bands can be assigned, which should allow one to identify and localize proteins in complex biological environments in future investigations. From our results, general guidelines for the interpretation of TER spectra are proposed. Copyright © 2012 John Wiley & Sons, Ltd.     

Strategy for improved analysis of peptides by surface‐enhanced Raman spectroscopy (SERS) involving positively charged nanoparticles

A strategy for improved surface‐enhanced Raman spectroscopy (SERS) measurements that extends the variety of analytes accessible to SERS analysis is developed. The strategy involves inducing aggregation by mixing positively charged nanoparticles which form SERS‐active clusters when mixed with negatively charged silver nanoparticles fabricated using the Lee–Meisel process. To make positively charged nanoparticles, silver nanoparticles using the traditional Lee–Meisel process are fabricated and coated with a thin layer of silica and the silica modified with silane chemistry. Analytes with a significant amount of negative charge exhibit strong Raman bands when the strategy using these fabricated, positively charged nanoparticles for inducing cluster formation is used, enabling their detection and analysis. We envision the use of positively charged nanoparticles in cluster formation for expanding the range of analytes that can be detected using SERS and hence the range of applications SERS can play a role in. Copyright © 2008 John Wiley & Sons, Ltd.