Synthesis and characterization of new poly(aryl ether)s with isolated fluorophores

Four novel poly(aryl ether)s ( P1 – P4 ) consisting of alternate isolated electron‐transporting (3,3″′‐bis‐trifluoromethyl‐p‐quaterphenyl for P1 , P3 or 3,3″′‐dicyano‐p‐quaterphenyl for P2 , P4 ) and hole‐transporting fluorophores [N‐(2‐ethylhexyl)‐3,6‐bis(styryl)carbazole for P1 , P2 or 9,9‐dihexyl‐2,7‐bis(styryl)fluorene for P3 , P4 ] were synthesized and characterized. These poly(aryl ether)s can be dissolved in organic solvents and exhibited good thermal stability with 5% weight‐loss temperature above 500 °C in nitrogen atmosphere. The photoluminescent (PL) spectra of the films of these polymers showed maximum peaks at around 442–452 nm. The PL spectral results revealed that the emission of polymers was dominated by the fluorophores with longer emissive wavelength via the energy transfer from p‐quaterphenyl to 3,6‐bis(styryl)carbazole or 2,7‐bis(styryl)fluorene segments. Therefore, the p‐quaterphenyl segments function only as the electron‐transporting/hole‐blocking units in these polymers, and the other segments are the emissive centers and hole‐transporting units. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital energy levels of these polymers were measured by cyclic voltammetry. The electron‐donating nitrogen atom on carbazole resulted in the higher HOMO energy levels of P1 and P2 than those of P3 and P4 . The single‐layer light‐emitting diodes (LED) of Al/poly(aryl ether)s ( P1 – P4 )/ITO glass were fabricated. P1 , P2 , and P4 revealed blue electroluminescence, but P3 emitted yellow light as a result of the excimer emission. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2215–2224, 2002     

Naphtho[2,1‐b:3,4‐b′]dithiophene‐based Bulk Heterojunction Solar Cells: How Molecular Structure Influences Nanoscale Morphology and Photovoltaic Properties

Organic bulk heterojunction photovoltaic devices based on a series of three naphtho[2,1‐b:3,4‐b′]dithiophene (NDT) derivatives blended with phenyl‐C₇₁‐butyric acid methyl ester were studied. These three derivatives, which have NDT units with various thiophene‐chain lengths, were employed as the donor polymers. The influence of their molecular structures on the correlation between their solar‐cell performances and their degree of crystallization was assessed. The grazing‐incidence angle X‐ray diffraction and atomic force microscopy results showed that the three derivatives exhibit three distinct nanoscale morphologies. We correlated these morphologies with the device physics by determining the J–V characteristics and the hole and electron mobilities of the devices. On the basis of our results, we propose new rules for the design of future generations of NDT‐based polymers for use in bulk heterojunction solar cells.     

Synthesis of novel side‐chain triphenylamine polymers with azobenzene moieties via RAFT polymerization and investigation on their photoelectric properties

Two novel and well‐defined polymers, poly[6‐(5‐(diphenylamino)‐2‐((4‐methoxyphenyl)diazenyl)phenoxy)hexyl methacrylate] (PDMMA) and poly[6‐(4‐((3‐ethynylphenyl)diazenyl) phenoxy)hexyl methacrylate] (PDPMMA), which bear triphenylamine (TPA) incorporated to azobenzene either directly (PDMMA) or with an interval (PDPMMA) as pendant groups were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The electrochemical behaviors of PDPMMA and PDMMA were investigated by cyclic voltammograms (CV) measurement. The hole mobilities of the polymer films were determined by fitting the J‐V (current‐voltage) curve into the space‐charge‐limited current method. The influence of photoisomerization of the azobenzene moiety on the behaviors of fluorescence emission, CV and hole mobilities of these two polymers were studied. The fluorescent emission intensities of these two polymers in CH₂Cl₂ were increased by about 100 times after UV irradiation. The oxidation peak currents (I_OX) of the PDMMA and PDPMMA in CH₂Cl₂ were increased after UV irradiation. The photoisomerization of the azobenzene moiety in PDMMA had significant effect on the electrochemical behavior, compared with that in PDPMMA. The changes of the hole mobility before and after UV irradiation were very small for both polymers. The HOMO energies (E_HOMO, HOMO: the highest occupied molecular orbital) of side chain moieties of TPA incorporated with cis‐isomer and trans‐isomer of azobenzene in PDMMA and PDPMMA were obtained by theoretical calculation, which are basically consistent with the experimental results. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

New host homopolymers containing pendant triphenylamine derivatives: Synthesis,optical, electrochemical properties and its blend with Ir(ppy)3 for green phosphorescent organic light‐emitting devices

Two vinyl homopolymers poly(N‐(4‐(4‐(4‐vinylbenzyloxy)styryl)phenyl)‐N‐phenylbenzenamine) (PVST ) and poly(4‐vinyltriphenylamine) (PTPA ) containing pendant hole‐transporting triphenylamine and 4‐oxystyryltriphenylamine groups, respectively, were synthesized by radical polymerization and employed as hosts for tris(2‐phenylpyridine) iridium [Ir(ppy)₃] phosphor. Structural influences of the hole‐transporting groups upon optoelectronic properties were investigated by photophysical, electrochemical, and electroluminescent methods. The polymers were readily soluble in common organic solvents and their weight‐average molecular weights (M_w) were 5.68 × 10⁴ and 1.90 × 10⁴, respectively. The emission spectra (both photoluminescence, PL and electroluminescent, EL) of the blends [PTPA with 4 wt % Ir(ppy)₃] showed dominant green emission (517 nm) attributed to Ir(ppy)₃ due to efficient energy transfer from PTPA to Ir(ppy)₃. The HOMO levels of PVST and PTPA, estimated from onset oxidation potentials in their cyclic voltammograms, were ?5.14 and ?5.36 eV, which are much higher than ?5.8 eV of the conventional poly(9‐vinylcarbazole) (PVK) host owing to high hole‐affinity of the triphenylamine groups. The optoelectronic performances of phosphorescent EL devices, using PVST and PTPA as hosts and Ir(ppy)₃ as dopant (indium tin oxide, ITO/poly(3,4‐ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS)/PVST or PTPA:Ir(ppy)₃(4 wt %):PBD(40 wt %)/BCP/Ca/Al), were investigated. The maximum luminance and luminance efficiency of the PTPA device were 9220 cd/m² and 6.1 cd/A, respectively, which were significantly improved relative to those of PVK and PVST. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7960–7971, 2008     

Thiepin‐Fused Heteroacenes: Simple Synthesis,Unusual Structure,and Semiconductors with Less Anisotropic Behavior

The simple one‐pot syntheses of sulfur‐rich thiepin‐fused heteroacences with an alkylidene–fluorene framework, THA1 and THA6 (thiepin‐fused heteroacene 1 or 6, in which the thiepin is conjugated at both ortho positions with S? CH₃ or S? C₆H₁₃, respectively), is reported. Based on electrochemical studies and theoretical calculations, their LUMO energies are relatively low (?3.26 eV), and their HOMO and HOMO?1 orbitals are nearly degenerate. The thiepin ring contributes mainly to HOMO?1 and LUMO orbitals, however, HOMO orbitals dominantly reside on thienoacence rings. Within the crystal of THA1, the molecules adopt a herringbone arrangement and multiple intermolecular interactions lead to the formation of a 2D network. Interestingly, THA6 shows totally different intermolecular arrangements. Organic field‐effect transistor (OFET) devices show both compounds exhibiting p‐type semiconducting behavior. Thin films or microcrystals of THA1 possess relatively high hole mobility. Moreover, the mobilities of the microcrystal of THA1 along three directions are in the same order, thus the hole‐carrier transporting within the hexagonal‐plane of microcrystal of THA1 exhibits less anisotropic behavior. In comparison, both thin films and microrods of THA6 show low hole mobilities. This agrees well with the intermolecular arrangements and interactions within crystal of THA6. Further theoretical calculations reveal that significant intermolecular electronic coupling among HOMO?1 orbitals and sulfur atoms play an important role in intermolecular electronic coupling for THA1.     

A novel mesogen‐jacketed liquid crystalline electroluminescent polymer with both thiophene and oxadiazole in conjugated side chain

Mesogen‐jacketed liquid crystalline polymers (MJLCPs) with both electron‐transport oxadiazole and hole‐transport thiophene in the side chain were reported for their promising electroluminescent property. Monomers of 2,5‐bis{5‐[(4‐alkoxyphenyl)‐1,3,4‐oxadiazole]thiophen‐2‐yl}styrene (M‐Cm, m is the number of the carbons in the alkoxy groups, m = 8,10) were synthesized and confirmed by ¹H‐NMR, mass spectrometry, and elemental analysis. The corresponding polymers were successfully obtained and characterized by thermal analysis, optical spectroscopy, cyclic voltammetry, electroluminescent analysis, polarized light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD). The polymers exhibited high decomposition temperatures reaching 382 °C and high T_g's reaching 184 °C. The absorption spectra indicated that both the monomers and polymers had little aggregation in film than that in solution, and the absorption spectra of the polymers showed an obvious blue‐shift compared with those of the monomers. Both the monomers and the polymers had blue‐green emission, and the photoluminescence spectra of the polymers in film suggested the formation of excimer or exciplex. The polymers showed lower HOMO energy levels and LUMO energy levels than those of the MJLCPs containing oxadiazole unit reported before. Electroluminescence study with the device configuration of ITO/PEDOT/PVK/polymer/TPBI/Ca/Ag showed maximum brightness and current efficiency of 541 cd/m² and 0.10 cd/A, which proved that the introduction of directly connected electron‐ and hole‐transport units could greatly improve the EL property of side‐chain conjugated polymers. The phase structures of the polymers were confirmed to be smectic A phase through the results of PLM and WAXD. The annealed samples emitted polarized photoluminescence at room temperature, which indicated potential utility for practical applications in display. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1502–1515, 2010     

Poly((2‐alkylbenzo[1,2,3]triazole‐4,7‐diyl)vinylene)s for organic solar cells

Poly((2‐Alkylbenzo[1,2,3]triazole‐4,7‐diyl)vinylene)s (pBTzVs) synthesized by Stille coupling show different absorption spectra, solid‐state morphology, and photovoltaic performance, depending on straight‐chain versus branched‐chain (pBTzV12 and pBTzV20) pendant substitution. Periodic boundary condition density functional computations show limited alkyl pendant effects on isolated chain electronic properties; however, pendants could influence polymer backbone conjugative planarity and polymer solid film packing. The polymers are electronically ambipolar, with best performance by pBTzV12 with hole and electron transport mobilities of 4.86 × 10^?6 and 1.96 × 10^?6 cm² V^?1 s^?1, respectively. pBTzV12 gives a smooth film morphology, whereas pBTzV20 gives a very different fibrillar morphology. For ITO/PEDOT:PSS/(1:1 w/w polymer:PC₇₁BM)/LiF/Al devices, pBTzV12 gives power conversion efficiency (PCE) up to 2.87%, and pBTzV20 gives up to PCE = 1.40%; both have open‐circuit voltages of V_OC = 0.6–0.7 V. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1539–1545     

Silafluorene‐based polymers for electrochromic and polymer solar cell applications

In this study, four novel silafluorene (SiF) and benzotriazole (Btz) bearing conjugated polymers are synthesized. In the context of electrochemical and optical studies, these polymers are promising materials both for electrochromic device (ECD) and polymer solar cell (PSC) applications. All of the polymers are ambipolar (both p‐ and n‐dopable) and multichromic. Electrochemistry experiments indicate that incorporation of selenophene instead of thiophene unit increases the HOMO energy level of the polymers. Power conversion efficiency of the PSCs reached 1.75% for PTBTSiF, 1.55% for PSBSSiF, 2.57% for PBTBTSiF, and 1.82% for PBSBSSiF. The hole mobilities of the polymers are estimated through space charge limited current (SCLC) model. PBTBTSiF has the highest hole mobility as 2.44 × 10^?3 cm² V s^?1. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1541–1547     

Charge transport,injection, and photovoltaic phenomena in oligo(phenylenevinylene) based diodes

We report on the charge transport and injection phenomena of (E,E,E,E)‐1,4‐bis[(4‐styryl)styryl]‐2‐methoxy‐5‐(2′‐ethylhexoxy)benzene (MEH‐OPV5) sandwiched between asymmetric contacts. The hole mobility of MEH‐OPV5 was determined by means of transient electroluminescence. The steady‐state current was injection‐limited. The electric field and temperature dependence of the current were quantitatively described by a phenomenological injection model of thermally assisted charge‐carrier tunneling in a one‐dimensional chain of hopping sites. Furthermore, we report on the photovoltaic properties of thin‐film photovoltaic cells on the basis of donor–acceptor heterojunctions. MEH‐OPV5 and buckminster fullerene were used as the donor and acceptor materials, respectively. The emphasis was on the role of morphology in such devices. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2665–2673, 2003     

Benzimidazole Derivatives: Synthesis,Physical Properties,and n‐Type Semiconducting Properties

A series of new benzimidazole derivatives were synthesized by the solid‐state condensation and direct sublimation (SSC‐DS) method and their physical properties were investigated. The reaction yields and product stability were significantly affected by the identity of the diamine and anhydride substituents. On the other hand, the substituents of the benzimidazole ring allowed fine tuning of the emission maxima, fluorescence quantum yields, and redox potentials. The HOMO–LUMO levels were estimated by cyclic voltammetry in film on indium tin oxide (ITO) and compared with values obtained by other methods. The described benzimidazoles showed high crystallinity, which is attributed to a high planarity and interactions between carbon and heteroatoms. These compounds showed n‐type semiconducting behavior in organic field‐effect transistors (OFETs). Optimized devices for fluorinated NTCBI (naphthalene tetracarboxylic bisbenzimidazole) showed respectable electron mobilities of ～10^?2 cm² V^?1 s^?1.     

ipso‐Arylative Ring‐Opening Polymerization as a Route to Electron‐Deficient Conjugated Polymers

ipso‐Arylative ring‐opening polymerization of 2‐bromo‐8‐aryl‐8H‐indeno[2,1‐b]thiophen‐8‐ol monomers proceeds to M_n up to 9 kg mol^?1 with conversion of the monomer diarylcarbinol groups to pendent conjugated aroylphenyl side chains (2‐benzoylphenyl or 2‐(4‐hexylbenzoyl)phenyl), which influence the optical and electronic properties of the resulting polythiophenes. Poly(3‐(2‐(4‐hexylbenzoyl)phenyl)thiophene) was found to have lower frontier orbital energy levels (HOMO/LUMO=?5.9/?4.0 eV) than poly(3‐hexylthiophene) owing to the electron‐withdrawing ability of the aryl ketone side chains. The electron mobility (ca. 2×10^?3 cm² V^?1 s^?1) for poly(3‐(2‐(4‐hexylbenzoyl)phenyl)thiophene) was found to be significantly higher than the hole mobility (ca. 8×10^?6 cm² V^?1 s^?1), which suggests such polymers are candidates for n‐type organic semiconductors. Density functional theory calculations suggest that backbone distortion resulting from side‐chain steric interactions could be a key factor influencing charge mobilities.     

Low bandgap π‐conjugated copolymers based on fused thiophenes and benzothiadiazole: Synthesis and structure‐property relationship study

A series of low bandgap conjugated polymers consisting of benzothiadiazole alternating with dithienothiophene (DTT) or dithienopyrrole (DTP) unit with or without 3‐alkylthiophene bridge have been synthesized. Effect of the fused rings and 3‐alkylthiophene bridge on the thermal, optical, electrochemical, charge transport, and photovoltaic properties of these polymers have been investigated. These polymers show broad absorption extending from 300 to 1000 nm with optical bandgaps as low as 1.2 eV; the details of which can be varied either by incorporating 3‐alkylthiophene bridge or by replacing DTT with DTP. The LUMO levels (?2.9 to ?3.3 eV) are essentially unaffected by the specific choice of donor moiety, whereas the HOMO levels (?4.6 to ?5.6 eV) are more sensitive to the choice of donor. The DTT and DTP polymers with 3‐alkylthiophene bridge were found to exhibit hole mobilities of 8 × 10^?5 and 3 × 10^?2 cm² V^?1 s^?1, respectively, in top‐contact organic field‐effect transistors. Power conversion efficiencies in the range 0.17–0.43% were obtained under simulated AM 1.5, 100 mW cm^?2 irradiation for polymer solar cells using the DTT and DTP‐based polymers with 3‐alkylthiophene bridge as donor and fullerene derivatives as acceptor. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5498–5508, 2009     

New quinoxaline derivatives as accepting units in donor–acceptor type low‐band gap polymers for organic photovoltaic cells

A series of new donor–acceptor‐type low‐band‐gap semiconducting polymers were synthesized as electron donors for organic photovoltaic cells. The polymers comprised quinoxaline derivatives as the acceptors and a benzodithiophene (BDT) derivative as the donors. 5,8‐Dibromoquinoxaline (Qx), 8,11‐dibromobenzo[a]phenazine (BPz), 10,13‐dibromodibenzo[a,c]phenazine (DBPz), and 8,11‐dibromo‐5‐(9H‐carbazol‐9‐yl)benzo[a]phenazine) (CBPz) were synthesized and polymerized with 2,6‐bis(trimethyltin)?4,8‐diethylhexyloxybenzo‐[1,2‐b;3,4‐b]dithiophene (BDT) through Stille cross‐coupling to produce four types of fully conjugated semiconducting polymers: PBDT‐Qx, PBDT‐BPz, PBDT‐DBPz, and PBDT‐CBPz , respectively. Intramolecular charge transfer between the electron donating and accepting units in the polymeric backbone induced a broad absorption from 300 to 800 nm. The optical band gap energies of the polymers were measured from their absorption onsets to be 1.54–1.80 eV depending on the polymer structure. Solution‐processed field‐effect transistors were fabricated to measure the hole mobilities of the polymers, and bulk hetero‐junction photovoltaic devices were fabricated using the synthesized polymers as electron donors and fullerene derivatives as electron acceptors. One of these devices showed a high power conversion efficiency of 3.87% with an open‐circuit voltage of 0.78 V, a short‐circuit current of 9.68 mA/cm², and a fill factor of 0.51 under air mass 1.5 global (AM 1.5 G) illumination conditions (100 mW/cm²). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4136–4149     

Twisted olefinic building blocks for low bandgap polymers in solar cells and ambipolar field‐effect transistors

A series of polymers based on 8,8′‐biindeno[2,1‐b]thiophenylidene for use in photovoltaic devices and field‐effect transistors are reported. These structurally twisted olefins are effective building blocks for preparation of low bandgap polymers with optical bandgaps of 1.2–1.5 eV. Device performance, such as V_oc and J_sc, in solar cell devices could be successfully modulated by incorporation of a variety of comonomers. Ambipolar properties in field‐effect transistors using Au electrodes were also studied, with PtBTPDPP exhibiting balanced charge transport properties with hole and electron mobilities of 0.09 and 0.12 cm²·V^?1·s^?1, respectively. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 889–899     

Influence of 4‐fluorophenyl pendants in thieno[3,4‐b]thiophene‐benzo[1,2‐b:4,5‐b′]dithiophene‐based polymers on the performance of photovoltaics

Polymers consisting of benzo[1,2‐b:4,5‐b′]dithiophene and thieno[3,4‐b]thiophene units (PTB‐based polymers), either fully or partially containing 4‐fluorophenyl pendants, are synthesized as electron donor materials for inverted‐type polymer solar cells (PSCs). The influence of the 4‐fluorophenyl pendant content on the thermal and optical properties, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), the hole mobilities, and photovoltaic performances are investigated. As the 4‐fluorophenyl pendant content increased, the HOMO and LUMO of the polymers were deepened proportionally and the open‐circuit voltages of the PSCs improved. Incorporation of 4‐fluorophenyl pendants into the polymers also affected the crystallinity, orientation, and compatibility with [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester in the active layers, leading to nonlinearities in the short‐circuit current densities, and fill factors. The incorporation of an appropriate number of 4‐fluorophenyl pendants enhanced the power conversion efficiencies of the PSC devices from 2.25 to 3.96% for identical device configurations. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1586–1593     

Rational design of methacrylate monomers containing oxadiazole moieties for single‐layer organic light emitting devices

Methacrylate derived monomers functionalized with pendant oxadiazole moieties were synthesized and copolymerized with carbazole containing monomers to form polymers with electron and hole transporting fragments in the same molecule. Substituents on the oxidazole moiety were varied with the purpose of bandgap tuning and performance optimization when employed in single‐layer organic light emitting devices (OLED). Quantum mechanical calculations of the HOMO‐LUMO levels of the oxidazole derivatives were used to down‐select promising candidates for chemical synthesis and testing in single‐layer OLEDs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1663–1673     

High‐performance fluorine‐containing BDT‐based copolymer for organic solar cells with a high open circuit voltage

A new donor–acceptor (D‐A) conjugated copolymer (PBDTT(ff)‐ttTPD) based on fluorine‐substituted benzodithiophene (BDT) and 6‐alkylthienothienyl thieno[3,4‐c]pyrrole‐4,6‐dione (ttTPD) has been synthesized via a Stille cross‐coupling reaction. As a control, the nonfluorinated BDT‐based ttTPD copolymer (PBDTT‐ttTPD) was also synthesized by using the same polymerization method. The number‐average molecular weights (M _n) of PBDTT(ff)‐ttTPD and PBDTT‐ttTPD were found to be 48,000 g/mol (? = 2.2) and 43,000 g/mol (? = 2.1), respectively. The HOMO levels of PBDTT(ff)‐ttTPD and PBDTT‐ttTPD were calculated to be ?5.65 and ?5.45 eV, respectively. The inclusion of fluorinated BDT units is a very effective approach to lowering the polymer's HOMO level. The SCLC mobilities of PBDTT(ff)‐ttTPD and PBDTT‐ttTPD were determined to be 5.9 × 10^?4 and 3.0 × 10^?4 cm²/Vs, respectively. Polymer solar cell devices prepared with PBDTT(ff)‐ttTPD and PBDTT‐ttTPD as their active layers were found to exhibit power conversion efficiencies of 7.45 and 6.79% with open circuit voltages of 0.98 and 0.84 V, respectively. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2506–2512     

Polymer Electron Acceptors Based on Fluorinated Isoindigo Unit for Polymer Solar Cells

Most of efficient polymer electron acceptors for polymer solar cells (PSCs) are based on naphthalene diimide or perylene diimide as the electron deficient building block. In this paper, for the first time, we report polymer electron acceptors based on fluorinated isoindigo (F‐IID) as the electron deficient building block. We synthesized two polymer electron acceptors consisting of alternating F‐IID unit and thiophene/selenophen unit. They show low‐lying LUMO/HOMO energy levels of –3.69/–5.69 eV, high electron mobilities of 1.31×10^–5 cm²·V^–1·s^–1 and broad absorption spectra with the optical bandgap of 1.61 eV. PSC devices using the two F‐IID‐based polymers as polymer electron acceptors show encouraging power conversion efficiencies (PCEs) of up to 1.50% with an open‐circuit voltage (V_OC) of 0.97 V, a short‐circuit current density (J_SC) of 2.91 mA·cm^–2, and a fill factor (FF) of 53.2%. This work suggests a new kind of polymer electron acceptors based on F‐IID unit.     

Synthesis of poly(N‐9‐ethylcarbazole‐exo‐norbornene‐5,6‐dicarboximide) for hole‐transporting layer in hybrid organic light‐emitting devices

We synthesized new polynorbornene dicarboximide (PCaNI) functionalized with hole‐transporting carbazole moieties and its copolymer (PCaNA) by ring‐opening metathesis polymerization (ROMP), where the PCaNA was further reacted with 3‐amino‐triethoxysilane to prepare PCaNI/silica hybrid. We also investigated the feasibility of PCaNI and PCaNI/silica hybrid (PCaSi) as a hole‐transporting material for hybrid organic light emitting devices (HOLEDs). To improve the performance of the PCaNI‐based HOLEDs, N,N′‐diphenyl‐N,N′‐(3‐methylphenyl)‐[1,1′‐biphenyl]‐4‐4′‐diamine (TPD) was also introduced into the PCaNI matrix. Results showed that PCaNI exhibited high glass transition temperature (～260 °C) and high optical transparency in the visible region. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of PCaNI were measured as 5.6 and 2.2 eV, while the TPD‐doped PCaNI showed 5.7 eV (HOMO) and 2.6 eV (LUMO). The PCaNI/silica hybrid nanolayers showed excellent solvent resistance due to the formation of covalent bonds between ITO and PCaNI. The HOLEDs with PCaNI/TPD or PCaSi/TPD hybrid nanolayers exhibited relatively higher luminance (～10,000 cd/m²), lower operating voltage (～6.5 V at 300 cd/m²), and higher current efficiency (～2.7 cd/A). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

EDOT‐diketopyrrolopyrrole copolymers for high bulk hole mobility and near infrared absorption

To obtain novel low‐bandgap materials with tailored hole‐transport properties and extended absorption, electron rich 3,4‐ethylenedioxythiophene is introduced as a comonomer in diketopyrrolo[3,4‐c]pyrrole copolymers with different aryl flanking units. The polymers are characterized by absorption and photoluminescence spectroscopy, dynamic scanning calorimetry, cyclic voltammetry, and X‐ray diffraction. The charge transport properties of these new materials are studied carefully using an organic field effect transistor geometry where the charge carriers are transported over a narrow channel at the semiconductor/dielectric interface. These results are compared to bulk charge carrier mobilities using space‐charge limited current (SCLC) measurements, in which the charge carrier is transported through the complete film thickness of several hundred nanometers. Finally, charge carrier mobilities are correlated with the electronic structure of the compounds. We find that in particular the thiophene‐flanked copolymer PDPP[T]₂‐EDOT is a very promising candidate for organic photovoltaics, showing an absorption response in the near infrared region with an optical bandgap of 1.15 eV and a very high bulk hole mobility of 2.9 × 10^?4 cm² V^?1 s^?1 as measured by SCLC. This value is two orders of magnitudes higher than SCLC mobilities reported for other polydiketopyrrolopyrroles and is in the range of the well‐known hole transporting polymer poly(3‐hexylthiophene). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 639–648