A template‐free route for controlled synthesis of dumbbell‐like Sb2S3 microcrystals

Large amounts of dumbbell‐like Sb₂S₃ microcrystals were synthesized via a simple solvothermal treatment method. Various techniques such as x‐ray diffraction (XRD), field‐emission scanning electron microscope (FESEM), high‐resolution transmission electron microscope (HRTEM), selected area electron diffraction (SAED), and photoluminescence spectrometry (PL) have been used to characterize the obtained products. The results showed that the products belong to the orthorhombic Sb₂S₃ phase, and the dumbbell‐like Sb₂S₃ microcrystals were composed by uniform microrods. Besides, the morphologies of Sb₂S₃ microcrystals could be changed from microshperes to dumbbell‐like microcrystals by only adjusting the reaction solvent. The solvent effects are discussed in detail. Furthermore, the PL properties of the obtained Sb₂S₃ microcrystals clearly show shape effects. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and characterization of inorganic‐organic ZnS(aminopropane)n composite materials

The main goal of our work was the synthesis and characterization of ZnS(aminopropane)_n hybrid inorganic‐organic layered materials. The basic material of our investigation was ZnS(1,3‐dap)_1/2, (where dap denotes diaminopropane). Its crystal structure has been solved by X‐ray powder diffraction methods. This layered compound was prepared using 1,3‐diaminepropane, zinc sulphate (ZnSO₄) and tioacetamide (CH₃CSNH₂). We have also tried to obtain and characterize other materials: ZnS(1‐ap) and ZnS(1,2‐dap), where ap denotes aminopropane. But in these last two cases diffraction patterns were of much poorer quality, which prevented a full structural survey; thus we cannot directly prove that hybrid lamellar materials were obtained. All compounds were studied using X‐ray diffraction, chemical analysis, UV‐vis spectroscopy and scanning electron microscopy. Additionally, using X‐ray diffraction as a function of temperature, we obtained information about structural changes of obtained composite materials under temperature treatment. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis via an organic molten salt solvent route and characterization of PbS nanocrystals

In this paper, four petals flowers‐like and quasi sphere‐like PbS nanostructures were successfully synthesized by an environment friendly organic molten salt solvent (OMSS) route at 200 °C, with different sulfur sources, e.g. thiourea and sodium thiosulfate, respectively. The as‐synthesized products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), UV–vis absorption spectrum and photoluminescence (PL) spectrum, respectively. It was shown that four petals flowers‐like and quasi sphere‐like PbS nanocrystals were formed. It was also demonstrated that the morphologies of PbS nanocrystals were significantly influenced by different sulfur sources. The ultraviolet‐visible absorption peaks of PbS nanocrystals exhibited a large blue‐shift and the luminescence spectra had strong and broad emission bands centered at 488 nm and 492 nm. The possible formation mechanisms of the PbS nanostructures were discussed. The organic molten salt solvent (OMSS) method is preferable for synthesizing high‐quality PbS nanocrystals. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A simple glucose reduction route for the synthesis of sheet‐like copper dendrites

In the current paper we designed a simple glucose reduction route for synthesis of sheet‐like Cu dendrites on a high yield, using CuSO₄ as the starting material. The reaction was carried out at 180 °C for 18 h in the absence of any structure‐directing agent. The product was characterized by X‐ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and electron diffraction (ED). Some factors influencing the shapes of Cu microcrystals, including the reaction temperature, time, and the concentration of the starting CuSO₄, were investigated. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of radial‐like ZnO structure by hydrothermal method with ZnSO4·7H2O and Zn(CH3COO)2·2H2O as zinc sources

Radial‐like ZnO structures were prepared using zinc sulfate (ZnSO₄·7H₂O) and zinc acetate [Zn(CH₃COO)₂·2H₂O] as zinc sources by a facile template‐free hydrothermal method in this paper. Structural and optical properties of radial‐like ZnO structures are characterized by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV‐vis spectrophotometer and photoluminescence measurement (PL). It has been found that the distinct surface morphologies of radial‐like ZnO structures grown by different zinc sources. Slim radial‐like ZnO with a hexagonal wurtzite structure is grown by using ZnSO₄·7H₂O as zinc sources, whereas coarse radial‐like ZnO with zincite structure is achieved by zinc acetate. The UV‐vis absorption spectra of them both display an obvious and significant absorption in the ultraviolet region. The room temperature PL spectra of ZnO structures grown by two different zinc sources possess a common feature that consists of a strong ultraviolet (UV) peak and visible emission band.     

Template‐free synthesis of hierarchical zinc oxide with improved photocatalytic properties

Novel hierarchical nano materials possess tremendous latent force in many applications. In this paper, hierarchical flower‐like, spherical and bowl‐like zinc oxide was successfully synthesized by altering solvent ratio (absolute ethanol and diethylene glycol) via a simple and template‐free solvothermal synthetic route. The solvent ratio also plays a vital role in deciding the structure, crystalline, band gap energy and specific surface area of the as‐synthesized samples. The preparation mechanism of ZnO in mixed alcohols was discussed. The obtained samples were characterized by energy dispersive spectroscopy(EDS), X‐ray diffraction (XRD), field emission scanning electron microscope (FESEM), transmission electron microscopy (TEM), N2 adsorption‐desorption, UV–vis diffuse reflectance spectroscopy (DRS). Photocatalytic activity of the as‐prepared ZnO nanocrystals was evaluated by the degradation of MB under UV irradiation. Among, the most effective photocatalyst was synthesized when the diethylene glycol was 10 ml.     

Structure and photoluminescence properties of SrWO4 3D microspheres synthesized by the surfactant‐assisted hydrothermal method

In this paper, we report large‐scale high‐quality SrWO₄ 3D microspheres synthesized in aqueous solutions under mild conditions with cetyl trimethyl ammonium bromide as a simple cationic surfactant. These crystals have been characterized by X‐ray diffraction, transmission electron microscopy and field emission scanning electron microscopy techniques. The crystal growth processes were employed to investigate the formation mechanism of SrWO₄ 3D microspheres. Room‐temperature photoluminescence indicated that the as‐prepared SrWO₄ 3D microcrystals had strong emission peaks at about 432 and 505 nm, respectively.     

Investigation of Bimetallic Thiocyanates belonging to ABTC Structure Type: ZnCd(SCN)4 and AHg(SCN)4 (A = Zn,Cd, Mn ) as Nonlinear Optical Crystal Materials

Bimetallic thiocyanate complexes crystal materials belonging to ABTC structure type: ZnCd(SCN)₄ and AHg(SCN)₄ (A = Zn, Cd, Mn ) which are potentially useful in second harmonic generation (SHG) have been prepared. Their structural, optical and physicochemical properties are characterized by infrared spectroscopy, X‐ray powder diffraction, vis/UV/NIR spectroscopy, SHG measurements and thermal analysis. The states of crystal growth solutions are discussed in this article. The crystals belong to tetragonal system with the space group I‐4 and exhibit SHG efficiencies over one order of magnitude higher than that of Urea. Their transparency cutoffs lie in the UV region, and they possess good physicochemical stabilities.     

PMA‐b‐PAA‐controlled synthesis of one‐dimensional CaCO3 superstructures

Crystallization of calcium carbonate (CaCO₃) crystals by a gas‐liquid diffusion method has been carried out in aqueous solution using a double‐hydrophilic block copolymer (DHBC) poly(maleic anhydride)‐b‐poly(acrylic acid) (PMA‐b‐PAA). The as‐prepared products were characterized with X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), selected area electron diffraction (SAED), high‐resolution transmission electron microscopy (HRTEM) and infrared spectroscopic analysis (FT‐IR). Uniform one‐dimensional calcite micro/nanostructures with different morphologies are fabricated through an assembled process. The influence of PMA‐b‐PAA copolymer concentration on the morphology of calcite nano/microwires is investigated, which plays an important role in the morphological control of building blocks composed of one‐dimensional calcite crystals. The possible formation mechanism of one‐dimensional CaCO₃ crystals was discussed. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Self‐template hydrothermal synthesis ZnS microspheres

Zinc sulfide (ZnS) microspheres were synthesized by a self‐template hydrothermal route using thiourea as sulphur source. The formation of these hollow spheres was mainly attributed to the oriented aggregation of ZnS nanocystals around the gas‐liquid interface between gas (H₂S, NH₃, or CO₂) and water followed by an Ostwald ripening process. The gas bubbles of H₂S, NH₃, or CO₂ produced during the reaction might play a soft‐template to form ZnS hollow microspheres. The products were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), electron diffraction (ED), and photoluminescence (PL). The crystal structure of prepared ZnS microspheres is hexagonal phase polycrystalline. The average microspheres diameter is 1.5 ‐ 6 µm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Inorganic and organic templates‐assisted solvothermal synthesis of trigonal selenium microrods

A facile and environment‐friendly solvothermal method has been developed for the controlled growth of nano‐ and micro‐structured trigonal selenium (t‐Se) by using green templates. And, the morphology of trigonal selenium can be tuned by using different kinds of templates. The as‐obtained products were characterized by X‐ray powder diffraction (XRD) and scanning electron microscope (SEM). Furthermore, the formation mechanism of trigonal selenium nano‐ and microcrystals was rationally suggested. This method will open a new avenue to synthesize other functional inorganic nano‐ and microcrystals. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Controllable surface‐state emission from colloidal CdS quantum dots under different growth conditions

High‐quality colloidal photoluminescent CdS quantum dots (QDs) were synthesized in non‐coordinating solvent octadecene (ODE) using oleic acid (OA) as capping molecule, and characterized by powered x‐ray diffraction (XRD), transmission electron microscope (TEM), UV‐Vis absorption spectra, photoluminescence (PL) emission spectroscopy and time‐resolved emission spectroscopy. The effects of the growth time, the molar ratio of OA/Cd and Cd/S on the PL intensity from surface‐state have been investigated. We found that the surface‐state emission could be easily controlled by tuning the growth time and the molar ratio of Cd/S.     

Low temperature synthesis of spindle‐like ZnO nanostructures under microwave irradiation

A simple and general microwave route is developed to synthesize nanostructured ZnO using Zn(acac)₂·H₂O (acac = acetylacetonate) as a single source precursor. The reaction time has a great influence on the morphology of the ZnO nanostructures and an interesting spindle‐like nanostructure is obtained. The microstructure and morphology of the synthesized materials are investigated by X‐ray diffraction (XRD), scanning electron microscopy (SEM), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). It is found that all of them with hexagonal wurtzite phase are of single crystalline structure in nature. Ultraviolet–visible (UV‐vis) absorption spectra of these ZnO nanostructures are investigated and a possible formation mechanism for the spindle‐like ZnO nanostructures is also proposed.     

Structural and optical properties of CdO nanowires synthesized from Cd(OH)2 precursors by calcination

CdO nanowires were produced by calcination process using Cd(OH)₂nanowires as precursors. The Cd(OH)₂ nanowires were synthesized via arc discharge method submerged in de‐ionized water. Transmission electron microscopy (TEM) analysis of the as‐synthesized Cd(OH)₂ nanowires revealed that nanowire morphology was abundant form with the diameters range from 5 to 40 nm. In addition to the nanowire morphology, Cd(OH)₂ nanospheres and hexagonal shaped nanoparticles were also displayed. The Cd(OH)₂ nanostructures were used as precursors to produce CdO nanowires and calcinated in air at 400 °C for four hours. After calcination, the structural, morphological and optical properties of the as‐synthesized CdO nanowires were characterized by means of TEM, selected area electron diffraction (SAED), X‐ray diffraction (XRD) and UV‐vis spectroscopy. The XRD and SAED techniques showed that the as‐synthesized Cd(OH)₂ nanostructures could be transformed into CdO nanostructures after the calcination process. TEM results revealed that the as‐synthesized CdO nanowires were 5–30 nm in diameter and shorter than corresponding Cd(OH)₂ nanowires. In addition, the diameters of the spherical or irregular CdO nanoparticles ranged from 20 nm to 50 nm. UV‐vis spectroscopy analysis was showed that the direct gap of the CdO nanowires were found to be 2.60 eV which is slightly higher than the earlier reported values of the bulk CdO for direct band gaps (2.3 eV) due to quantum size effect. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Facile electrochemical synthesis of tellurium nanorods and their photoconductive properties

Tellurium nanorods have been successfully fabricated by template and surfactant‐free electrochemical technique from an aqueous solution at room temperature. The as‐prepared tellurium nanorods were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectrometry, UV‐vis spectroscopy and photoluminescence spectroscopy. Films based on tellurium nanorods were constructed to study the photoresponse and I‐V curves. These photoresponse measurements demonstrate that tellurium nanorods exhibited enhanced conductivity under illumination compared to in the dark measurement.     

Hydrothermal synthesis of porous octahedral Cu microcrystals and their application as hydrogen peroxide sensors

The novel porous octahedral Cu microcrystals were synthesized successfully by a simple one‐step hydrothermal reduction method based on TEA technique. The X‐ray diffraction (XRD) patterns reveal that Cu microcrystals have octahedral crystalline phase and high purity. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies represent that Cu microcrystals have a porous structure on their surface and polycrystalline structure. The asprepared porous Cu structures exhibited good ectrocatalytic activity in response to H₂O₂ reduction and can be used as H₂O₂ sensor. Furthermore, the possible formation mechanism of the POCu was proposed.     

Low‐temperature urea‐assisted hydrothermal synthesis of Bi2S3 nanostructures with different morphologies

Different morphologies of single‐crystalline orthorhombic phase bismuth sulfide (Bi₂S₃) nanostructures, including sub‐microtubes, nanoflowers and nanorods were synthesized by a urea‐assisted hydrothermal method at a low temperature below 120 °C for 12 h. The as‐synthesized powders were characterized by X‐ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and UV‐vis spectrophotometry. The experimental results showed that the sulfur sources had a great effect on the morphology and size of the resulting powders. The formation mechanism of the Bi₂S₃ nanostructures with different morphologies was discussed. All Bi₂S₃ nanostructures showed an appearance of blue shift relative to the bulk orthorhombic Bi₂S₃, which might be ascribed to the quantum size effect of the final products. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Fabrication and optical properties of two‐dimensional photonic crystal of ZnO pillars

Two‐dimensional (2D) photonic crystal of ZnO pillars was synthesized on silicon substrate by the combination of template method and vapor‐phase transport method. The microstructure and morphology of the ZnO photonic crystal was evaluated by using scanning electron microscope (SEM) and X‐ray diffraction (XRD). Large‐area specular reflectance measurements showed the presence of photonic stop band. The effect of the photonic band gap and the special structure on the photoluminescence (PL) properties of ZnO photonic crystal has been investigated. Both suppression and enhancement in the PL were observed. Raman scattering analyses demonstrated that the defect of ZnO photonic crystal exists in this experiment. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ethylenediamine inducing growth of {100} facets exposed PbS nanosheets

A simple ethylenediamine‐assisted hydrothermal method was developed for the synthesis of sheet‐like PbS nanostructures. Studies show that ethylenediamine not only provides a weakly basic environment for the reaction system, but also acts as a capping reagent to control the growth habit of cubic PbS. A reasonable growth mechanism for the PbS nanosheet structure has been proposed on the basis of the experimental studies. The structure, morphology, and composition of the nanosheets have been characterized by X‐ray powder diffraction, field‐emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and transmission electron microscopy.     

Synthesis of ZnO nanorods by the thermal reduction process of a mixture of ZnO and Al powder

Single‐crystalline Zinc oxide (ZnO) nanorods were firstly synthesized on gold‐coated Si substrate via a simple thermal reduction method from the mixture of ZnO and Al powder. The growth process was carried out in a quartz tube at different temperature (550‐700 °C) and at different oxygen partial pressure. Their structure properties were investigated by X‐ray diffraction (XRD), scanning electron microscope (SEM), X‐ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The length of the as‐prepared ZnO nanorods was up to several micrometers and their diameters were about 130 nm. The X‐ray diffraction patterns, transmission electron microscopic images, and selective area electron diffraction patterns indicate that the one‐dimensional ZnO nanorods are a pure Single‐crystal and preferentially oriented in the [0001] direction. The reaction mechanism of ZnO nanorods was proposed on the basis of experimental data. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)