Preparation of hybrid CaCO3–pepsin hemisphere with ordered hierarchical structure and the application for removal of heavy metal ions

In this paper, a simple way for preparation of hybrid CaCO₃–pepsin material with ordered hierarchical structure was reported. It could be observed that the nanoparticles self-assembled into a lot of tetrahedral calcite crystals, which assembled into highly ordered surfaces of hemisphere-shaped CaCO₃ with hierarchical structures. These products were characterized by X-ray powder diffraction (XRD), Scanning electron microscope (SEM), High resolution transmission electron microscopy (HRTEM), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetry-differential thermal analyses (TG-DTA) and photoluminescence (PL). A rational mechanism was proposed for the formation of hybrid CaCO₃–pepsin material ordered hierarchical structure. Functional study using the hybrid CaCO₃–pepsin material as an adsorbent for removal of heavy metal ions demonstrates that its distinguishing features in water treatment involve not only high removal capacities, but also decontamination of trace ions. The acquired experimental data show that both the functional and hierarchical structural features of hybrid CaCO₃–pepsin material provide a promising adsorbent for removal of heavy metal ions.     

Growth of hierarchical calcium carbonate crystals templated by biomolecules of lotus root

In this paper, crystal growth of calcium carbonate (CaCO₃) in the presence of biomolecules of lotus root was investigated. Scanning electron microscopy, Fourier transform infrared spectroscopy and X‐ray powder diffractometry were used to characterize the products. The results indicate that calcite spherical particles were constructed from small rhombohedral subunits. Similar CaCO₃ crystals were also gained when crystal growth of CaCO₃ in aqueous solution containing extracts of lotus root was performed, suggesting that the soluble biomolecules of lotus root play a crucial role in directing the formation of hierarchical calcite spherical particles. The possible formation mechanism of the CaCO₃ crystals by using lotus root is also discussed, which can be interpreted by particle‐aggregation based non‐classical crystallization laws. The biomolecules of lotus root might induce and control the nucleation and growth of calcium carbonate crystals. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

PSSS‐controlled synthesis of CaCO3 superstructures

Complex CaCO₃ superstructure can be easily synthesized by using poly (sodium 4‐styrenesulfonate) (PSSS) as a structure directing agent to direct the controlled precipitation of calcium carbonate from aqueous solution. The products were characterized by scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD) analysis. The results revealed that the morphology of the products changed significantly with the increasing of the concentration of PSSS in solution, from rhombohedral particles to plate‐packed aggregates to spheres with smooth surface, to sponge‐like spheres and finally to complex spherical superstructure consisted of plate‐like sub‐units. We hypothesize that the observed sequential changes in morphology of CaCO₃ particles with added PSSS concentration may be due to the influence of PSSS on nucleation, growth and aggregation of CaCO₃ crystals. The formation mechanisms of CaCO₃ crystals with different morphologies were discussed. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of calcium binding proteins on the precipitation of calcium carbonate: A kinetic and morphologic study

In our experiments, the thermodynamic effect of calcium binding proteins (CBP) on the growth of calcium carbonate (CaCO₃) was studied in vitro. The CaCO₃ crystals obtained in systems with and without CBP were characterized by scanning electron microscope (SEM), Fourier Transform Infrared spectrograph (FT‐IR) and powder X‐ray diffractometer (XRD). The kinetic process was studied by monitoring the conductivity and pH value, which revealed the obvious inducement effect of CBP on the CaCO₃ crystals growth, and the possible formation mechanism of CaCO₃ in CBP solution was discussed. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Formation of various polymorphs of calcium carbonate on porous membrane by electrochemical approach

Calcium carbonate (CaCO₃) formation was observed without surface modification of the organic template and in the absence of chemical additives such as macromolecules and divalent cations. Our innovative electrochemical approach that involves the use of an alternating current facilitated the crystallization of CaCO₃ polymorphs on a porous polymer membrane. A solution of calcium chloride (CaCl₂) and sodium carbonate (Na₂CO₃) was filled in a glass cell, and the porous membrane was interposed in the cell. A sine waveform of 10 Hz was applied to the platinum electrodes using a high-speed bipolar power supply. An alternating current was generated for 60 min. The crystal morphology and crystal structure of the resulting hybrid membrane were studied. In this electrochemical approach, versatile polymorphs of vaterite, aragonite, and calcite were formed on the membrane, thereby showing that the alternating current induced the formation of various polymorphs of CaCO₃ on the porous membrane even in the absence of any additives.     

Preparation of calcium carbonate crystals in the presence of trisodium citrate

The dumbbell‐like calcium carbonate (CaCO₃) crystals were synthesized in the presence of trisodium citrate. Different morphologies were obtained by changing the reaction temperature and the trisodium citrate concentration. The obtained samples were characterized by means of X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the morphology of CaCO₃ crystals was markedly affected by the reaction temperature and citrate anion concentration. The possible growth mechanism of CaCO₃ crystals was proposed. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal structure and spectroscopic studies of a new organic monohydrogenmonophosphate dihydrate

The crystal synthesis and structure of a new organic monohydrogenmophosphate (3,4‐Cl₂‐CH₂C₆H₃NH₃)₂HPO₄·2H₂O are reported. This compound crystallizes in the monoclinic P2₁/n with a = 9.081(7) Å, b = 6.501(5) Å, c = 35.423(12) Å, β = 91.09(5)°, V = 2090.9(2) ų, and Z = 4. Crystal structure was solved and refined to R = 0.042, using 2543 independent reflections. It can be described by inorganic layers, including the HPO₄^‐ anions and the H₂O molecules, parallel to (a, b) planes and situated at z = 0 and z = 1/2. The interlayer spacing is occupied by the organic molecules which perform different interactions around the 3D network cohesion. A characterization of this compound by solid‐state (¹³C, ³¹P) MAS NMR and IR spectroscopies is also reported. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Controllable mineralization of calcium carbonate on regenerated cellulose fibers

Gel–forming fibers (GF fibers) can serve as nucleation sites to prepare calcium carbonate (CaCO₃) because they can adsorb large amounts of Ca²⁺ due to their porous structure. In this paper, mineralization behavior of CaCO₃ on GF fibers in ethanol–water mixed solvents without any additives has been investigated. The results showed that some crystals covered the fibers, while others were embedded in fibers. Twin–sphere based vaterite, zonary and rodlike calcite with large aspect ratio could be prepared successfully. The effect of ethanol content inside GF fibers, concentration of Ca²⁺ and CO₃^2‐, mineralization time, miscibility between alcohol and water, and temperature were studied. Lastly, a possible mineralization mode was suggested. This work could provide a new method to prepare inorganic/polymer hybrid materials. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Precipitation of sparingly soluble salts in packed sandbeds in the presence of miscible and immiscible organic substances

Sparingly soluble salts precipitation, e.g. calcium carbonate or calcium sulfate, results in pore clogging in rock formations and in the concomitant reduction of the local permeability of oil wells during the oil extraction processes. On the other hand, in situ controlled salt precipitation is desirable in various applications e.g. waterproofing of concrete constructions suffering from leakages, etc. In the present study, calcium carbonate (CaCO₃) precipitation in sandbeds was investigated, in the presence of organic solvents simulating the conditions prevalent in oil‐well zones. CaCO₃ precipitation was investigated from supersaturated solutions prepared by in‐situ mixing of NaHCO₃ and CaCl₂.2H₂O solutions before the inlet of sandbeds. The solution resulting from the mixing of the two solutions was supersaturated with respect to all calcium carbonate polymorphs. Three types of experiments were performed depending on the supersaturated solutions: a) aqueous solutions b) aqueous supersaturated solutions in contact with sandbeds pre‐saturated with n‐dodecane c) aqueous solutions containing monoethylene glycol (MEG). Results showed that oil–water interfaces enhanced the heterogeneity of the supersaturated solutions and accelerated crystal growth of calcium carbonate at the inlet of the sandbed, resulting in early pore clogging and limitation of local permeability. Maximum sandbed consolidation was obtained with the solutions containing MEG.     

Speciation of Fe(II) and Fe(III) effect on CaCO3 crystallization

The present work was carried out to investigate separately the effect of Fe²⁺ and Fe³⁺ on the precipitation kinetics and the microstructure of CaCO₃. For this an experimental procedure was proposed. Precipitation tests were made by using the dissolved‐CO₂ degassing method. Both air and nitrogen were employed to strip the CO₂ from a Ca(HCO₃)₂ solution initially rich in this gas. At anoxic medium, it was shown that iron (II) prolongs the nucleation step and decelerates the crystalline growth rate. X‐ray diffraction analysis shows that its presence inhibits calcite and promotes aragonite variety. By using air, the reaction medium is rich in oxygen and iron (II) is rapidly oxidized. Seeing the higher solution pH (> 6.5), iron hydroxide forms before the onset of CaCO₃ precipitation and plays a role of seed permitting to initiate CaCO₃ nucleation. So, contrary to the observed effect of iron (II), the presence of iron (III) accelerates the precipitation rate of CaCO₃. As for iron (II), iron (III) inhibits calcite formation but favored the vaterite variety instead of the aragonite one.     

Investigation of the Conditions for the Production of Calcium Magnesium Acetate (CMA) Road Deicer in an Extractive Crystallization Process

Calcium magnesium acetate (CMA) is considered as the best road deicer to replace the environmentally unacceptable NaCl and CaCl₂. However, the high cost of CMA prohibits its widespread use. The present study is dealing with the investigation of a crystallization method for the production of deicing CMA crystals of desired physical properties and the elucidation of the conditions under which such a product can be formed. Extractive crystallization is promising for the low cost production of CMA crystals considering that acetic acid is produced by a biochemical method and removed from the fermentation broth in situ by organic extractant systems. In this method, this organic phase, which contains the acetate ions is contacted with an aqueous phase which is the source of calcium and magnesium ions. The extractive crystallization process resulted in the production of well‐formed, large, and non‐spherical crystals of calcium acetate (CA), magnesium acetate (MA), and calcium magnesium acetate double salt (CMADS). The crystal size was affected by the concentration of acetic acid in both the organic and aqueous phases, whereas the crystal type and hydration level were determined primarily by the acetic acid concentration in the aqueous phase. The molar ratio of the precursor salts (CaCO₃/MgCO₃) in the reaction mixture was found to be the major factor for determining the habit and Ca/Mg content of crystals. Crystallization of CMADS was favored at high concentrations of acetic acid in the aqueous phase and at higher temperatures as shown from supplementary evaporation‐to‐dryness experiments.     

Influence of stirring speed on the crystallization of calcium carbonate

Control over crystal morphology of calcium carbonate (CaCO₃) was investigated by simply changing the stirring speeds in the process of CaCO₃ formation. Scanning electron microscopy (SEM) and powder X‐ray diffraction (XRD) measurements explore the morphology evolution of CaCO₃ at varying stirring speeds. As the stirring speeds increase, rhombohedral calcite, spherical vaterite, and monoclinic crystal with coexistence of calcite phase and vaterite phase were formed, suggesting a facile control over calcium carbonate crystallization in constructing crystals with desired morphology. Moreover, almost pure vaterite spherical particles of narrow particle size distribution were formed at optimum stirring speed. Finally, also elucidated in this work is the mechanism investigation into the construction of various crystal forms via this simple route. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Phase‐controlled crystallization of amorphous calcium carbonate in ethanol‐water binary solvents

The evolution of amorphous calcium carbonate (ACC) into crystals in ethanol/water binary solvents under ambient temperature was investigated, and it was found to depend on the volume ratio of ethanol to water (R). Calcite remained dominant when the amount of water was high (R = 1/3). A slight change in the amount of ethanol (R = 3/1) could lead to a dramatic change in the polymorph from calcite to aragonite. However, when poly (allylamine hydrochloride) (PAH) was added at R = 3/1, almost pure vaterite could be obtained, which has a specific morphological variation (from hollow microspheres to cloud‐like). This study provides an alternative polymorphic route for the CaCO₃ mineral by using the evolution of ACC in different solvent environments, which provides some useful clues for understanding the importance of kinetic control of the morphologies and polymorphs of a wide range of inorganic materials. In addition, this simple mild phase‐controlled synthetic method could be scaled up as a green chemistry route for the industrial production of different polymorphs of CaCO₃.     

Synthesis and crystal structure of a new inorganic – organic complex: (4‐ClC7H6NH3)9[Nd(P6O18)2]·9H2O

Single crystals of (4‐ClC₇H₆NH₃)₉[Nd(P₆O₁₈)₂]·9H₂O were synthesized in aqueous solution. This compound crystallizes in a triclinic P1 unit‐cell, with a = 14.898(6), b = 18.049(7), c = 20.695(6)Å, α = 102.04(3), β = 100.49(3), γ = 98.82(3)°, V = 5245(4) ų and Z = 2. The crystal structure has been solved and refined to R = 0.043 (Rw = 0.061) for 20420 observed reflections. The atomic arrangement of the title compound can be described as infinite layers built by complex of Neodyme [Nd(P₆O₁₈)₂] and nine water molecules. The organic cations are located in the space delimited by the successive inorganic layers. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth of spinel crystals in vanadium slag and their characterization

Morphology of vanadium slags were investigated by scanning electron microscopy (SEM). The mineralogical phases were characterized by energy disperse X‐ray spectrometry (EDS) and powder X‐ray diffraction (XRD). The obtained results show that spinels and silicates are the major phases in the vanadium slag, and V is concentrated in Fe_xV_3‐xO₄ and Mg_x(V, Ti)_3‐xO₄. Both the spinel grain size and volume fraction in the slag with higher V₂O₃ content are much larger than that with lower V₂O₃ content. (Fe, Mn)₂SiO₄ and (Fe, Mn)SiO₃ have a higher proportion in the slag with lower V₂O₃ and higher SiO₂ content. The relation among cooling conditions and grain size and volume fraction of spinels is also discussed. It is found that low cooling rate and long holding time benefit spinel crystal growth, especially for the interval of 1200‐1250 °C. Both mean diameter and volume fraction of spinels could achieve or exceed the industry vanadium slag when holding more than 45 min. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and structure of calcium peroxide‐templated porous calcium carbonate crystals

Crystalline calcium carbonate with randomly dispersed porous structure was prepared through co‐ crystallization with calcium peroxide and the following template elimination by a post heating treatment and washing with water. The artificial CaCO₃ possess abundant macro‐mesopores structures and high surface area. This approach may open a new general route for the preparation of crystals with high porosity and structure specialty. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Study on crystallization of calcium carbonate from calcium sulfate and ammonium carbonate in the presence of magnesium ions

Batch reactive crystallization of calcium carbonate (CaCO₃) from ammonium carbonate ((NH₄)₂CO₃) and calcium sulfate (CaSO₄) was investigated in the presence of magnesium (Mg²⁺) ions. It was observed that Mg²⁺ ions partly inhibited the conversion of CaSO₄ into CaCO₃. When the content of Mg²⁺ was less than 2%, the reduction in conversion rate of CaSO₄ was less than 2%, and the effect of Mg²⁺ ions could be ignored. Effect of impurity on crystallization kinetics of CaCO₃, including the growth rate and nucleation rate, was investigated. The results revealed that when Mg²⁺ ions content was less than 1%, Mg²⁺ could promote the growth of CaCO₃ and inhibit the nucleation process, which was favorable for the filtration of CaCO₃.When the content of Mg²⁺ ions was greater than 1%, Mg²⁺ inhibited the growth of CaCO₃, which resulted in explosion nucleation and led to a large number of particles in the solution, which was unfavorable for the filtration of CaCO₃. Based on the Bransom model, the particle size distribution equations of CaCO₃ were established. X‐ray diffraction patterns and scanning electron microscopy images exhibited the existence of spherical vaterite of CaCO₃ due to the reaction of CaSO₄ with (NH₄)₂CO₃ under the effect of Mg²⁺ ions, which was inconsistent with the results reported in the literatures.     

Facile solvothermal synthesis,growth mechanism and thermoelectric property of flower‐like Bi2Te3

Hierarchical flower‐like Bi₂Te₃ was synthesized through a facile solvothermal method. The crystal structure and morphology of the as‐prepared samples were characterized by X‐ray diffraction (XRD), filed emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and high resolution TEM. The reaction parameters such as reaction time, the amount of glucose, concentration of NaOH and the reaction temperature were systematically investigated. Based on the FESEM observations, a possible mechanism defined as a self‐assembly process accompanied by anisotropic growth mechanism was proposed. Moreover, the thermoelectric properties were measured at the temperature range of 300–600 K. The hierarchical flower‐like Bi₂Te₃ presented good thermoelectrical properties. The maximum ZT value reached up to 0.6 at 600 K, which was higher than that of Bi₂Te₃ nanoparticles.     

Synthesis and characterization of inorganic‐organic ZnS(aminopropane)n composite materials

The main goal of our work was the synthesis and characterization of ZnS(aminopropane)_n hybrid inorganic‐organic layered materials. The basic material of our investigation was ZnS(1,3‐dap)_1/2, (where dap denotes diaminopropane). Its crystal structure has been solved by X‐ray powder diffraction methods. This layered compound was prepared using 1,3‐diaminepropane, zinc sulphate (ZnSO₄) and tioacetamide (CH₃CSNH₂). We have also tried to obtain and characterize other materials: ZnS(1‐ap) and ZnS(1,2‐dap), where ap denotes aminopropane. But in these last two cases diffraction patterns were of much poorer quality, which prevented a full structural survey; thus we cannot directly prove that hybrid lamellar materials were obtained. All compounds were studied using X‐ray diffraction, chemical analysis, UV‐vis spectroscopy and scanning electron microscopy. Additionally, using X‐ray diffraction as a function of temperature, we obtained information about structural changes of obtained composite materials under temperature treatment. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Conductometric study of calcium carbonate prenucleation stage: underlining the role of CaCO3o ion pairs

Calcium carbonate crystallization process, especially the prenucleation stage, has increasingly been the subject of several works. In the present work, a simple method based on electrical conductivity modeling applied to the FCP (Fast Controlled Precipitation) method data is used to highlight the role of CaCO₃^o ion pairs on calcium carbonate prenucleation stage. A good agreement was obtained between the resistivity vs pH curves estimated by the McCleskey model equation and obtained experimentally in a FCP test. Results showed that the nucleation process begins with the formation of CaCO₃^o ion pairs as pre‐nuclei as soon as the calcite‐equilibrium pH is reached. Additionally CaCO₃^o content increases with pH to form aggregates, which depend on the saturation state of the solution. Basing on our thermodynamic data, these aggregates do not form amorphous calcium carbonate ACC as an intermediate phase. They lead to the formation of stable calcium carbonate nuclei which will further evolve to crystallize. Furthermore we demonstrate that in addition to their inhibitory effect on the Ca²⁺ and CO₃²⁻ association to form ion pairs, the two scale inhibitors sodium triphosphate (STP) and sodium polyacrylate (RPI) reduce ion pairs aggregation rate.