OctTES/TEOS system for hybrid coatings: real‐time monitoring of the hydrolysis and condensation by Raman spectroscopy

The hybrid organic–inorganic system Tetra‐ethyl‐ortho‐silicate functionalized with Octyl‐triethoxy‐silane, studied as protective coating for the preservation of historical glasses from the environmental weathering agents, has been characterized by Raman spectroscopy by monitoring the sol‐gel reactions over time through characteristic features in the spectrum. In particular, for the hydrolysis reaction the disappearance of the 653 cm⁻¹ (Si‐O symmetric breathing) and 810 cm⁻¹ (CH₂ rocking in Si‐alkoxides) peaks and the growth of the 710 cm⁻¹ band, because of hydrolyzed alkyl‐silane, and of the 881 cm⁻¹ peak (ethanol C–C symmetric stretching) have been checked. Moreover, the condensation reaction can be tracked by the disappearance of the two main peaks of the alcohols at 816 and 881 cm⁻¹, going along with the growth of the broad band between 250 and 500 cm⁻¹ (Si–O–Si symmetric bending) and of the feature at 840 cm⁻¹ (Si–O–Si stretching). At the end of the condensation process the Raman spectrum still displays spectral bands unique to the alkyl chain in Octyl‐triethoxy‐silane, in the 1330–1450 cm⁻¹ and 2725–3000 cm⁻¹ ranges. Copyright © 2016 John Wiley & Sons, Ltd.     

Crystal recovery from Al‐implantation induced damaging in 3C‐SiC films

Damaging in Al‐implanted 3C‐SiC and subsequent crystal recovery due to thermal treatments up to 1350 °C are evaluated by X‐ray diffraction and micro‐Raman spectroscopy. Reciprocal space mapping of (004) 3C‐SiC planes shows a low‐intensity implantation‐induced secondary peak at higher interplanar spacing in the as‐implanted 3C‐SiC sample, with a generated misfit between the implanted and the epitaxial region of about 0.6%. Increasing the annealing temperature from 950 °C to 1350 °C, the secondary peak is gradually re‐absorbed within the epitaxial 3C‐SiC reciprocal lattice point. Finally, the disappearance of the secondary peak after a 1350 °C thermal treatment is observed. Thus, implantation‐induced average strain, resulting in a severe 3C‐SiC deforma‐ tion, has been totally relieved at the highest annealing temperature. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Vibrational spectra and crystal structure of the di‐amino acid peptide cyclo(L‐Met‐L‐Met): comparison of experimental data and DFT calculations

Experimental Raman and FT‐IR spectra of solid‐state non‐deuterated and N‐deuterated samples of cyclo(L ‐Met‐L ‐Met) are reported and discussed. The Raman and FT‐IR results show characteristic amide I vibrations (Raman: 1649 cm⁻¹, infrared: 1675 cm⁻¹) for molecules exhibiting a cis amide conformation. A Raman band, assigned to the cis amide II vibrational mode, is observed at ∼1493 cm⁻¹ but no IR band is observed in this region. Cyclo(L ‐Met‐L ‐Met) crystallises in the triclinic space group P1 with one molecule per unit cell. The overall shape of the diketopiperazine (DKP) ring displays a (slightly distorted) boat conformation. The crystal packing employs two strong hydrogen bonds, which traverse the entire crystal via translational repeats. B3‐LYP/cc‐pVDZ calculations of the structure of the molecule predict a boat conformation for the DKP ring, in agreement with the experimentally determined X‐ray structure. Copyright © 2009 John Wiley & Sons, Ltd.     

Time‐lapse Raman imaging of single live lymphocytes

We present time‐lapse Raman imaging (TLRI) of living cells as a new approach in label‐free chemical imaging through non‐electronic resonant, spontaneous Raman microspectroscopy. Raman hyperspectral datacubes of individual live peripheral blood lymphocytes were successively acquired. The Raman imaging time per voxel, with a volume of 0.3 fl, was 100 ms and the total image time of a 32 × 32 pixels image was less than 2 min. Multiple images of an individual cell have been obtained. A full series of TLRI images typically resulted in more than 1.6 million data points per image. We analyzed the datasets using hierarchical cluster analysis. A fingerprint of molecular changes was observed before the cell was blebbing. The molecular fingerprint was related to a gradual disappearance of the Raman signal from carotenoids. Concomitant changes occurred in the C H stretch high wavenumber region, presumably due to a change in the protein and lipid environment of carotenoids. These changes were smaller than 5% of the total signal at 2937 cm⁻¹. We hypothesize that the lipid environment of the carotenoids changes as a result of the photophysics in the carotenoid molecules. The detectability of carotenoids was shown to be 2.3 µMper voxel, which corresponds to 415 molecules. TLRI enables high‐speed chemical imaging not only in the intense high wavenumber region of the Raman spectrum, but particularly in the more informative fingerprint region between 500 and 1800 cm⁻¹. Copyright © 2010 John Wiley & Sons, Ltd.     

Studies on the resonance Raman spectra of polyaniline obtained with near‐IR excitation

The effects of near‐IR (NIR) laser power over the Raman spectra of poly(aniline) emeraldine salt (PANI‐ES) and base (PANI‐EB) were investigated. The reasons for the existence of several bands from 1324 to 1500 cm⁻¹ in the Raman spectra of poly(aniline) obtained at NIR region were also studied. The bands from 1324 to 1375 cm⁻¹ were associated to νC N of polarons with different conjugation lengths and the bands from 1450 to 1500 cm⁻¹ in Raman spectra of PANI emeraldine and pernigraniline base forms were correlated to νCN modes associated with quinoid units having different conjugation lengths. The increase of laser power at 1064.0 nm causes the deprotonation of PANI‐ES and the formation of cross‐linking segments having phenazine and/or oxazine rings. For PANI‐EB only a small spectral change is observed when the laser power is increased, owing to the low absorption of this form in the NIR region. Copyright © 2007 John Wiley & Sons, Ltd.     

Layer‐dependent resonant Raman scattering of a few layer MoS2

We report resonant Raman scattering of MoS₂ layers comprising of single, bi, four and seven layers, showing a strong dependence on the layer thickness. Indirect band gap MoS₂ in bulk becomes a direct band gap semiconductor in the monolayer form. New Raman modes are seen in the spectra of single‐ and few‐layer MoS₂ samples which are absent in the bulk. The Raman mode at ~230 cm⁻¹ appears for two, four and seven layers. This mode has been attributed to the longitudinal acoustic phonon branch at the M point (LA(M)) of the Brillouin zone. The mode at ~179 cm⁻¹ shows asymmetric character for a few‐layer sample. The asymmetry is explained by the dispersion of the LA(M) branch along the Γ‐M direction. The most intense spectral region near 455 cm⁻¹ shows a layer‐dependent variation of peak positions and relative intensities. The high energy region between 510 and 645 cm⁻¹ is marked by the appearance of prominent new Raman bands, varying in intensity with layer numbers. Resonant Raman spectroscopy thus serves as a promising non invasive technique to accurately estimate the thickness of MoS₂ layers down to a few atoms thick. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermo‐Raman spectroscopy of synthetic nesquehonite — implication for the geosequestration of greenhouse gases

Pure nesquehonite (MgCO₃·3H₂O)/Mg(HCO₃)(OH)·2H₂O was synthesised and characterised by a combination of thermo‐Raman spectroscopy and thermogravimetry with evolved gas analysis. Thermo‐Raman spectroscopy shows an intense band at 1098 cm⁻¹, which shifts to 1105 cm⁻¹ at 450 °C, assigned to the ν₁CO₃²⁻ symmetric stretching mode. Two bands at 1419 and 1509 cm⁻¹ assigned to the ν₃ antisymmetric stretching mode shift to 1434 and 1504 cm⁻¹ at 175 °C. Two new peaks at 1385 and 1405 cm⁻¹ observed at temperatures higher than 175 °C are assigned to the antisymmetric stretching modes of the (HCO₃)⁻ units. Throughout all the thermo‐Raman spectra, a band at 3550 cm⁻¹ is attributed to the stretching vibration of OH units. Raman bands at 3124, 3295 and 3423 cm⁻¹ are assigned to water stretching vibrations. The intensity of these bands is lost by 175 °C. The Raman spectra were in harmony with the thermal analysis data. This research has defined the thermal stability of one of the hydrous carbonates, namely nesquehonite. Thermo‐Raman spectroscopy enables the thermal stability of the mineral nesquehonite to be defined, and, further, the changes in the formula of nesquehonite with temperature change can be defined. Indeed, Raman spectroscopy enables the formula of nesquehonite to be better defined as Mg(OH)(HCO₃)·2H₂O. Copyright © 2008 John Wiley & Sons, Ltd.     

Vibrational spectroscopic studies of the structure of di‐amino acid peptides. Part II: cyclo(L‐Asp‐L‐Asp) in the solid state and in aqueous solution

Solid‐state protonated and N,O‐deuterated Fourier transform infrared (IR) and Raman scattering spectra together with the protonated and deuterated Raman spectra in aqueous solution of the cyclic di‐amino acid peptide cyclo(L ‐Asp‐L ‐Asp) are reported. Vibrational band assignments have been made on the basis of comparisons with previously cited literature values for diketopiperazine (DKP) derivatives and normal coordinate analyses for both the protonated and deuterated species based upon DFT calculations at the B3‐LYP/cc‐pVDZ level of the isolated molecule in the gas phase. The calculated minimum energy structure for cyclo(L ‐Asp‐L ‐Asp), assuming C₂ symmetry, predicts a boat conformation for the DKP ring with both the two L ‐aspartyl side chains being folded slightly above the ring. The CO stretching vibrations have been assigned for the side‐chain carboxylic acid group (e.g. at 1693 and 1670 cm⁻¹ in the Raman spectrum) and the cis amide I bands (e.g. at 1660 cm⁻¹ in the Raman spectrum). The presence of two bands for the carboxylic acid CO stretching modes in the solid‐state Raman spectrum can be accounted for by factor group splitting of the two nonequivalent molecules in a crystallographic unit cell. The cis amide II band is observed at 1489 cm⁻¹ in the solid‐state Raman spectrum, which is in agreement with results for cyclic di‐amino acid peptide molecules examined previously in the solid state, where the DKP ring adopts a boat conformation. Additionally, it also appears that as the molecular mass of the substituent on the C^α atom is increased, the amide II band wavenumber decreases to below 1500 cm⁻¹; this may be a consequence of increased strain on the DKP ring. The cis amide II Raman band is characterized by its relatively small deuterium shift (29 cm⁻¹), which indicates that this band has a smaller N H bending contribution than the trans amide II vibrational band observed for linear peptides. Copyright © 2009 John Wiley & Sons, Ltd.     

Molecular structure,vibrational spectroscopic,first‐order hyperpolarizability and HOMO,LUMO studies of 3‐hydroxy‐2‐naphthoic acid hydrazide

The Fourier‐transform infrared spectrum of 3‐hydroxy‐2‐naphthoic acid hydrazide (3H2NAH) was recorded in the region 4000–400 cm⁻¹. The Fourier‐transform Raman spectrum of 3H2NAH was also recorded in the region 3500–10 cm⁻¹. Quantum chemical calculations of energies, geometrical structure and vibrational wavenumbers of 3H2NAH were carried out by density functional theory (DFT/B3LYP) method with 6‐31G(d,p) as basis set. The difference between the observed and scaled wavenumber values of most of the fundamentals is very small. The values of the electric dipole moment (µ) and the first‐order hyperpolarizability (β) of the investigated molecule were computed using ab initio quantum mechanical calculations. The UV spectrum was measured in ethanol solution. The calculation results also show that the 3H2NAH molecule might have microscopic nonlinear optical (NLO) behavior with non‐zero values. A detailed interpretation of the infrared and Raman spectra of 3H2NAH is also reported based on total energy distribution (TED). The calculated HOMO and LUMO energies shows that charge transfer occur within the molecule. The theoretical FT‐IR and FT‐Raman spectra for the title molecule have also been constructed. Copyright © 2009 John Wiley & Sons, Ltd.     

Density functional theory calculations and vibrational spectra of 2‐bromo‐4‐chloro phenol and 2‐chloro‐4‐nitro phenol

FTIR and FT Raman spectra of 2‐bromo‐4‐chloro phenol (BCP) and 2‐chloro‐4‐nitro phenol (CNP) were recorded in the region 4000–400 and 4000–50 cm⁻¹, respectively. The molecular structure, geometry optimization, and vibrational wavenumbers were investigated. The spectra were interpreted with the aid of normal coordinate analysis based on density functional theory (DFT) using the standard B3LYP/6‐31G** method and basis set combination and was scaled using multiple scale factors, which yield good agreement between the observed and calculated wavenumbers. The results of the calculations are applied to simulate the infrared and Raman spectra of the title compounds, which showed excellent agreement with the observed spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the hydrogen‐arsenate mineral pharmacolite Ca(AsO3OH)·2H2O—implications for aquifer and sediment remediation

The removal of arsenate anions from aqueous media, sediments and wasted soils is of environmental significance. The reaction of gypsum with the arsenate anion results in pharmacolite mineral formation, together with related minerals. Raman and infrared (IR) spectroscopy have been used to study the mineral pharmacolite Ca(AsO₃OH)· 2H₂O. The mineral is characterised by an intense Raman band at 865 cm⁻¹ assigned to the ν₁ (AsO₃)²⁻ symmetric stretching mode. The equivalent IR band is found at 864 cm⁻¹. The low‐intensity Raman bands in the range from 844 to 886 cm⁻¹ provide evidence for ν₃ (AsO₃) antisymmetric stretching vibrations. A series of overlapping bands in the 300‐450 cm⁻¹ region are attributed to ν₂ and ν₄ (AsO₃) bending modes. Prominent Raman bands at around 3187 cm⁻¹ are assigned to the OH stretching vibrations of hydrogen‐bonded water molecules and the two sharp bands at 3425 and 3526 cm⁻¹ to the OH stretching vibrations of only weakly hydrogen‐bonded hydroxyls in (AsO₃OH)²⁻ units. Copyright © 2009 John Wiley & Sons, Ltd.     

Density functional theory study and vibrational analysis of FT‐IR and FT‐Raman spectra of N‐hydroxyphthalimide

The Fourier transform infrared (FT‐IR) spectrum of N‐hydroxyphthalimide has been recorded in the range of 4000–400 cm⁻¹, and the Fourier transform Raman (FT‐Raman) spectrum of N‐hydroxyphthalimide has been recorded in the range of 4000–50 cm⁻¹. With the hope of providing more and effective information on the fundamental vibrations, the Density Functional Theory (DFT)‐Becke3‐Lee‐Yang‐Parr (B3LYP) level with 6‐31G* basis set has been employed in quantum chemical analysis, and normal coordinate analysis has been performed on N‐hydroxyphthalimide by assuming C_s symmetry. The computational wavenumbers are in good agreement with the observed results. The theoretical spectra obtained along with intensity data agree well with the observed spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Density functional theory calculations and vibrational spectra of p‐bromonitrobenzene

FT‐IR and FT‐Raman spectra of p‐bromonitrobenzene (p‐BNB) have been recorded in the region 4000–400 cm⁻¹ and 4000–50 cm⁻¹, respectively. The molecular structure, geometry optimization, vibrational wavenumbers have been investigated. The spectra were interpreted with the aid of normal coordinate analysis based on the density functional theory (DFT) using the standard B3LYP/6‐31G method and basis set combination and was scaled using multiple scale factors yielding good agreement between observed and calculated wavenumbers. The results of the calculations are applied to simulate infrared and Raman spectra of the title compound which showed reasonable agreement with the observed spectra. Copyright © 2009 John Wiley & Sons, Ltd.     

Food additives characterization by infrared,Raman, and surface‐enhanced Raman spectroscopies

Fourier‐transform infrared (FT‐IR), Raman (RS), and surface‐enhanced Raman scattering (SERS) spectra of β‐hydroxy‐β‐methylobutanoic acid (HMB), L ‐carnitine, and N‐methylglycocyamine (creatine) have been measured. The SERS spectra have been taken from species adsorbed on a colloidal silver surface. The respective FT‐IR and RS band assignments (solid‐state samples) based on the literature data have been proposed. The strongest absorptions in the FT‐IR spectrum of creatine are observed at 1398, 1615, and 1699 cm⁻¹, which are due to ν_s(COOH) + ν(CN) + δ(CN), ρ_s(NH₂), and ν(C O) modes, respectively, whereas those of L ‐carnitine (at 1396/1586 cm⁻¹ and 1480 cm⁻¹) and HMB (at 1405/1555/1585 cm⁻¹ and 1437–1473 cm⁻¹) are associated with carboxyl and methyl/methylene group vibrations, respectively. On the other hand, the strongest bands in the RS spectrum of HMB observed at 748/1442/1462 cm⁻¹ and 1408 cm⁻¹ are due to methyl/methylene deformations and carboxyl group vibrations, respectively. The strongest Raman band of creatine at 831 cm⁻¹ (ρ_w(R NH₂)) is accompanied by two weaker bands at 1054 and 1397 cm⁻¹ due to ν(CN) + ν(R NH₂) and ν_s(COOH) + ν(CN) + δ(CN) modes, respectively. In the case of L ‐carnitine, its RS spectrum is dominated by bands at 772 and 1461 cm⁻¹ assigned to ρ_r(CH₂) and δ(CH₃), respectively. The analysis of the SERS spectra shows that HMB interacts with the silver surface mainly through the  COO⁻, hydroxyl, and  CH₂ groups, whereas L ‐carnitine binds to the surface via  COO⁻ and  N⁺(CH₃)₃ which is rarely enhanced at pH = 8.3. On the other hand, it seems that creatine binds weakly to the silver surface mainly by  NH₂, and C O from the  COO⁻ group. Copyright © 2006 John Wiley & Sons, Ltd.     

Vibrational spectroscopy and density functional theory calculations of poly‐D‐mannuronate and heteropolymeric fractions from sodium alginate

The tetrasaccharide of 1 → 4β‐D‐mannopyranuronate (MM) and the alternating tetrasaccharide of 1 → 4 b‐D‐mannopyranuronate and 1 → 4α‐L‐gulopyranuronate (MG) were analyzed based on density functional theory (DFT) by employing the Gaussian 03 W package. The molecular geometries were fully optimized by using the Becke's three‐parameter hybrid exchange functional combined with Lee–Yang–Parr correlation functional (B3LYP) and using a 6‐31G(d,p) basis set. The calculated IR spectrum of MM presents a band at 1093 cm⁻¹ for C C stretching vibration, which is in good agreement with the experimental observation (1096 cm⁻¹) for the polymannuronate fraction obtained by partial hydrolysis of sodium alginate extracted from the hybrid brown seaweed Lessonia–Macrocystis. The calculated value at 826 cm⁻¹for MM is in close agreement with the experimental value and confirms that this band is characteristic of polymannuronate blocks. Most of the bands in the IR spectrum are also present in the observed Raman spectrum of the polymannuronate fraction. The experimental IR spectrum of heteropolymeric fraction obtained by partial hydrolysis of sodium alginate shows absorbances similar to those calculated for the model tetrasaccharide (MG). Surface‐enhanced Raman scattering (SERS) allows differentiation between the homopolymeric and heteropolymeric fractions of sodium alginate. The SERS spectrum of the heteropolymeric fraction shows an enhanced signal at 731 cm⁻¹which is present in the calculated Raman spectrum of the tetrasaccharide MG at 729 cm⁻¹. This band is assigned to the ring‐breathing deformation of the β‐D‐mannopyranuronate and α‐L‐gulopyranuronate residues. Copyright © 2010 John Wiley & Sons, Ltd.     

Raman spectroscopy of halogen‐containing carbonates

Raman spectroscopy complemented with infrared spectroscopy has been used to study a series of selected natural halogenated carbonates from different origins, including bastnasite, parisite and northupite. The position of CO₃²⁻ symmetric stretching vibration varies with the mineral composition. An additional band for northupite at 1107 cm⁻¹ is observed. Raman spectra of bastnasite, parisite and northupite show single bands at 1433, 1420 and 1554 cm⁻¹, respectively, assigned to the ν₃ (CO₃)²⁻ asymmetric stretching mode. The observation of additional Raman bands for the ν₃ modes for some halogenated carbonates is significant in that it shows distortion of the CaO₆ octahedron. No ν₂ Raman bending modes are observed for these minerals. The band is observed in the infrared spectra, and multiple ν₂ modes at 844 and 867 cm⁻¹ are observed for parisite. A single intense infrared band is found at 879 cm⁻¹ for northupite. Raman bands are observed forthe carbonate ν₄ in‐phase bending modes at 722 cm⁻¹ for bastnasite, 736 and 684 cm⁻¹ for parisite and 714 cm⁻¹ for northupite. Multiple bands are observed in the OH stretching region for selected bastansites and parisites, indicating the presence of water and OH units in the mineral structure. The presence of such bands brings into question the actual formula of these halogenated carbonate minerals. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the magnesium‐carbonate minerals—artinite and dypingite

Magnesium minerals are important in the understanding of the concept of geosequestration. The two hydrated hydroxy magnesium‐carbonate minerals artinite and dypingite were studied by Raman spectroscopy. Intense bands are observed at 1092 cm⁻¹ for artinite and at 1120 cm⁻¹ for dypingite, attributed ν₁ symmetric stretching mode of CO₃²⁻. The ν₃ antisymmetric stretching vibrations of CO₃²⁻ are extremely weak and are observed at 1412 and 1465 cm⁻¹ for artinite and at 1366, 1447 and 1524 cm⁻¹ for dypingite. Very weak Raman bands at 790 cm⁻¹ for artinite and 800 cm⁻¹ for dypingite are assigned to the CO₃²⁻ν₂ out‐of‐plane bend. The Raman band at 700 cm⁻¹ of artinite and at 725 and 760 cm⁻¹ of dypingite are ascribed to CO₃²⁻ν₂ in‐plane bending mode. The Raman spectrum of artinite in the OH stretching region is characterised by two sets of bands: (1) an intense band at 3593 cm⁻¹ assigned to the MgOH stretching vibrations and (2) the broad profile of overlapping bands at 3030 and 3229 cm⁻¹ attributed to water stretching vibrations. X‐ray diffraction studies show that the minerals are disordered. This is reflected in the difficulty of obtaining Raman spectra of reasonable quality, and explains why the Raman spectra of these minerals have not been previously or sufficiently described. Copyright © 2008 John Wiley & Sons, Ltd.     

IR/Raman spectroscopy and DFT calculations of cyclic di‐amino acid peptides. Part III: comparison of solid state and solution structures of cyclo(L‐Ser‐L‐Ser)

B3‐LYP/cc‐pVDZ calculations of the gas‐phase structure and vibrational spectra of the isolated molecule cyclo(L ‐Ser‐L ‐Ser), a cyclic di‐amino acid peptide (CDAP), were carried out by assuming C₂ symmetry. It is predicted that the minimum‐energy structure is a boat conformation for the diketopiperazine (DKP) ring with both L ‐seryl side chains being folded slightly above the ring. An additional structure of higher energy (15.16 kJ mol⁻¹) has been calculated for a DKP ring with a planar geometry, although in this case two fundamental vibrations have been calculated with imaginary wavenumbers. The reported X‐ray crystallographic structure of cyclo(L ‐Ser‐L ‐Ser), shows that the DKP ring displays a near‐planar conformation, with both the two L ‐seryl side chains being folded above the ring. It is hypothesized that the crystal packing forces constrain the DKP ring in a planar conformation and it is probable that the lower energy boat conformation may prevail in the aqueous environment. Raman scattering and Fourier‐transform infrared (FT‐IR) spectra of solid state and aqueous solution samples of cyclo(L ‐Ser‐L ‐Ser) are reported and discussed. Vibrational band assignments have been made on the basis of comparisons with the calculated vibrational spectra and band wavenumber shifts upon deuteration of labile protons. The experimental Raman and IR results for solid‐state samples show characteristic amide I vibrations which are split (Raman: 1661 and 1687 cm⁻¹, IR: 1666 and 1680 cm⁻¹), possibly due to interactions between molecules in a crystallographic unit cell. The cis amide I band is differentiated by its deuterium shift of ∼30 cm⁻¹, which is larger than that previously reported for trans amide I deuterium shifts. A cis amide II mode has been assigned to a Raman band located at 1520 cm⁻¹. The occurrence of this cis amide II mode at a wavenumber above 1500 cm⁻¹ concurs with results of previously examined CDAP molecules with low molecular weight substituents on the C^α atoms, and is also indicative of a relatively unstrained DKP ring. Copyright © 2009 John Wiley & Sons, Ltd.     

Origin of the Raman mode at 379 cm−1 observed in ZnO thin films grown on sapphire

In this work, we present a detailed Raman scattering study to clarify the origin of the mode at 379 cm⁻¹ which is observed in Raman spectra of the ZnO films grown on c‐sapphire substrates and generally attributed to the A₁‐transverse optical (A₁‐TO) mode of ZnO. The studied ZnO films were deposited by metal‐organic chemical vapor deposition on c‐sapphire and (0001) ZnO substrates. In the z(−,−)z̄ backscattering configuration, the A₁‐TO mode is forbidden, while the 379 cm⁻¹ peak is still observed in the as‐deposited film grown on sapphire substrate. However, this mode is not observed in Raman spectra of the as deposited film grown on ZnO substrate. We suggest that the peak at 379 cm⁻¹ is the E_1g mode of the sapphire substrate which is allowed in z(−,−)z̄ backscattering configuration. The effects of annealing, the substrate and the collection cross‐section on Raman active modes were analyzed. Copyright © 2011 John Wiley & Sons, Ltd.     

Measurement of the absolute Raman scattering cross section of the 1584‐cm−1 band of benzenethiol and the surface‐enhanced Raman scattering cross section enhancement factor for femtosecond laser‐nanostructured substrates

The absolute Raman scattering cross section (σ_RS) for the 1584‐cm⁻¹ band of benzenethiol at 897 nm (1.383 eV) has been measured to be 8.9 ± 1.8 × 10⁻³⁰ cm² using a 785‐nm pump laser. A temperature‐controlled, small‐cavity blackbody source was used to calibrate the signal output of the Raman spectrometer. We also measured the absolute surface‐enhanced Raman scattering cross section (σ_SERS) of benzenethiol adsorbed onto a silver‐coated, femtosecond laser‐nanostructured substrate. Using the measured values of 8.9 ± 1.8 × 10⁻³⁰ and 6.6 ± 1.3 × 10⁻²⁴ cm² for σ_RS and σ_SERS respectively, we calculate an average cross‐section enhancement factor (EF) of 0.8 ± 0.3 × 10⁶. Copyright © 2009 John Wiley & Sons, Ltd.