A template‐free route for controlled synthesis of dumbbell‐like Sb2S3 microcrystals

Large amounts of dumbbell‐like Sb₂S₃ microcrystals were synthesized via a simple solvothermal treatment method. Various techniques such as x‐ray diffraction (XRD), field‐emission scanning electron microscope (FESEM), high‐resolution transmission electron microscope (HRTEM), selected area electron diffraction (SAED), and photoluminescence spectrometry (PL) have been used to characterize the obtained products. The results showed that the products belong to the orthorhombic Sb₂S₃ phase, and the dumbbell‐like Sb₂S₃ microcrystals were composed by uniform microrods. Besides, the morphologies of Sb₂S₃ microcrystals could be changed from microshperes to dumbbell‐like microcrystals by only adjusting the reaction solvent. The solvent effects are discussed in detail. Furthermore, the PL properties of the obtained Sb₂S₃ microcrystals clearly show shape effects. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Low‐temperature urea‐assisted hydrothermal synthesis of Bi2S3 nanostructures with different morphologies

Different morphologies of single‐crystalline orthorhombic phase bismuth sulfide (Bi₂S₃) nanostructures, including sub‐microtubes, nanoflowers and nanorods were synthesized by a urea‐assisted hydrothermal method at a low temperature below 120 °C for 12 h. The as‐synthesized powders were characterized by X‐ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and UV‐vis spectrophotometry. The experimental results showed that the sulfur sources had a great effect on the morphology and size of the resulting powders. The formation mechanism of the Bi₂S₃ nanostructures with different morphologies was discussed. All Bi₂S₃ nanostructures showed an appearance of blue shift relative to the bulk orthorhombic Bi₂S₃, which might be ascribed to the quantum size effect of the final products. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of shuttle‐like Sb2S3 nanorod‐bundles via a solvothermal approach under alkaline condition

Uniform shuttle‐like Sb₂S₃ nanorod‐bundles were synthesized via a polyvinylpyrrolidone (PVP) assisted solvothermal approach under alkaline condition, using antimony chloride (SbCl₃) and thiourea (CH₄N₂S, Tu) as the starting materials in ethanol. The phase structure, composition and morphology of the product were characterized by means of X‐ray diffraction (XRD), energy dispersive X‐ray spectrometry (EDS), transmission electron microscopy (TEM), and high‐resolution transmission electron microscopy (HRTEM). XRD and EDS results confirm that the synthesized Sb₂S₃ nanorod‐bundles have an orthorhombic structure and an atomic ratio of 3:2 for S:Sb. TEM and HRTEM results show that the shuttle‐like Sb₂S₃ bundles are composed of nanorods with a size distribution of 20‐40 nm and growing along c‐axis. Furthermore, experiments under different reaction conditions were carried out and the mechanism for the growth of nanorod‐bundles was discussed (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Morphology‐photocatalytic properties‐growth mechanism for ZnO nanostructures via microwave‐assisted hydrothermal synthesis

ZnO nanostructures with various morphologies including rod‐like, sheet‐like, needle‐like and flower‐like structures were successfully synthesized via a fast and facile microwave‐assisted hydrothermal process. Reaction temperature, reaction time and the addition of NaOH were adjusted to obtain ZnO with different morphologies. Scanning electron microscopy(SEM), transmission electron microscope(TEM), X‐ray diffraction (XRD) and ultraviolet spectrophotometer (UV) were used to observe the morphology, crystal structure, ultraviolet absorption and photocatalytic activity of the obtained ZnO. The results indicated that growth rate of ZnO nanostructure along [001] direction was more sensitive to temperature compared with those along [101] and [100] directions. The competition between anionic surfactant and OH⁻ played an important role in the formation of ZnO with various morphologies. Flower‐like ZnO had better ultraviolet absorption property and excellent photocatalytic activity than ZnO in the other morphologies. On the basis of the above results, a possible growth mechanism for the formation of ZnO nanostructures with different morphologies was described.     

Solvothermal synthesis and good electrochemical property of pinetree like Bi2S3

Hierarchical pinetree like Bi₂S₃ was synthesized through a facile solvothermal route in the mixture of deionized water and tetrahydrofuran. The phase composition, morphology, and structure of the as‐prepared Bi₂S₃ products were characterized by using various techniques including X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM). It was found that the pinetree like Bi₂S₃ structures were composed of numerous assembled nanosheets, which had uniform morphology with the mean width and length of about 110 nm and 15 μm, respectively. Furthermore, the electrochemical property of the obtained pinetree like Bi₂S₃ was investigated. The pinetree like Bi₂S₃ presented both the high electrochemical hydrogen storage and electrochemical Li intercalation performance.     

Substitution effects on ferroelectric,leakage current and anti‐fatigue characteristic of Bi4‐xSbxTi3O12 thin films

Bi_4‐xSb_xTi₃O₁₂ (BSTO) (x = 0, 0.03, 0.04, 0.05, 0.06 and 0.07) thin films have been fabricated on Pt/Ti/SiO₂/Si substrates by sol‐gel method. The effects of various Sb³⁺ content on microstructure and ferroelectric properties of systems are investigated. XRD show that Bi_4‐xSb_xTi₃O₁₂ (x≠0) thin films prefer (117) orientation. The substitution Sb³⁺ for Bi³⁺ reduces the grain size of the film surface. Compared to the BTO (x = 0) film, Bi_4‐xSb_xTi₃O₁₂ films display exciting electric properties. Especially when x = 0.04, the film Bi_3.96Sb_0.04Ti₃O₁₂ has achieved the max 2Pr value of 87μC/cm². This film also has a better anti‐fatigue characteristic, which can be up to 10¹⁰ switching cycles without fatigue. The leakage current density improved with J = 8×10⁻⁸ A/cm².     

Synthesis and photoluminescence properties of bundle‐like CdS nanostructures assembled by high‐quality nanorods

Bundle‐like cadmium sulfide (CdS) nanostructures assembled by high‐quality nanorods have been successfully synthesized on a large scale via a facile solvothermal route in a mixed solvent of ethylenediamine and dodecanethiol. The typical lengths of bundle‐like CdS nanostructures are several tens of micrometers, and the diameters and lengths of CdS nanorods are about 50–70 nm and several micrometers, respectively. The influence of the concentration of dodecanethiol on the morphologies of CdS nanostructures has been investigated carefully. Photoluminescence spectra (PL) of CdS nanostructures reveal that the bundle‐like CdS nanostructures exhibited two fluorescence emission peaks centered at 495nm (2.51 eV) and 522 nm (2.38 eV) as the excitation wavelength is 405 nm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Surface‐morphology evolution of ZnO nanostructures grown by hydrothermal method

Surface‐morphology evolution of ZnO nanocrystals has been observed by the hydrothermal process. The effects of stirring time and ammonia content on the morphology evolution have been discussed, respectively. Extension of stirring time of the precursor results in morphology transformation from star‐like to wire‐like ZnO nanocrystals. ZnO nuclei aggregation and uniform Zn(OH)₂ precipitation can readily explain these two morphologies, respectively. By increasing the ammonia content in the solution, the morphology of ZnO crystals is transformed from an irregular shape to hexagon sheets to nanorods, and the side length of ZnO crystals is decreased accordingly. Hollow structures are realized at the subsequent solution aging process. Variation of zinc ammonic complex and minimum surface energy can well explain the morphology evolution of ZnO nanostructures.     

Morphology‐controllable synthesis of ZnO nano‐/micro‐ structures by a solvothermal process in ethanol solution

Flower‐like ZnO nanostructures assembled by nanorods with bimodal size distribution have been synthesized by a solvothermal process in NaOH‐Et system. Various effects of the solvothermal parameters and assistant additives on the morphologies of ZnO nanostructures have been investigated. The directing effect of chloride ions have been observed in the formation of highly symmetrical 3D ZnO nanostructures. A possible mechanism has been proposed to explain the formation of ZnO nanoflowers in NaOH‐Et system. A strong near‐UV emission band centered at around 396 nm is observed in the photoluminescence spectrum of flower‐like ZnO nanostructures, indicating of their high crystal quality.     

Controllable synthesis and field emission properties of In2O3 nanostructures

Large‐scale In₂O₃ nanorods, nanocubes and nanowires have been successfully synthesized by chemical vapor deposition route under atmospheric pressure. The structures and morphologies were characterized by x‐ray diffraction (XRD), scanning election microscopy (SEM) and high‐resolution transmission electron microscopy (HRTEM). The growth mechanisms of these In₂O₃ nanostructures were analyzed in detail based on the experimental results. Field‐emission measurements of these nanostructures demonstrated that nanorods with rectangular cross‐section possessed good performance with a turn‐on field of 2.47 Vμm^–1 and a field enhancement factor of 4597. The room‐temperature photoluminescence (PL) spectrum of the In₂O₃ nanostructure showed UV emission centered at about 396 nm and visible emissions located at 541 and 623 nm. (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Enhancement of thermoelectric efficiency in vapor deposited Sb2Te3 and Sb1.8In0.2Te3 crystals

Pure and indium doped antimony telluride (Sb₂Te₃) crystals find applications in high performance room temperature thermoelectric devices. Owing to the meagre physical properties exhibited on the cleavage faces of melt grown samples, an attempt was made to explore the thermoelectric parameters of p‐type crystals grown by the physical vapor deposition (PVD) method. The crystal structure of the grown platelets (9 mm× 8 mm× 2 mm) was identified as rhombohedral by x‐ray powder diffraction method. The energy dispersive analysis confirmed the elemental composition of the crystals. The electron microscopic and scanning probe image studies revealed that the crystals were grown by layer growth mechanism with low surface roughness. At room temperature (300 K), the values of Seebeck coefficient S (⊥ c) and power factor were observed to be higher for Sb_1.8In_0.2Te₃ crystals (155 μVK⁻¹, 2.669 × 10⁻³ W/mK²) than those of pure ones. Upon doping, the thermal conductivity κ (⊥ c) was decreased by 37.14% and thus thermoelectric efficiency was improved. The increased figure of merit, Z = 1.23 × 10⁻³ K⁻¹ for vapour grown Sb_1.8In_0.2Te₃ platelets indicates that it could be used as a potential thermoelectric candidate.     

Low temperature synthesis of spindle‐like ZnO nanostructures under microwave irradiation

A simple and general microwave route is developed to synthesize nanostructured ZnO using Zn(acac)₂·H₂O (acac = acetylacetonate) as a single source precursor. The reaction time has a great influence on the morphology of the ZnO nanostructures and an interesting spindle‐like nanostructure is obtained. The microstructure and morphology of the synthesized materials are investigated by X‐ray diffraction (XRD), scanning electron microscopy (SEM), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). It is found that all of them with hexagonal wurtzite phase are of single crystalline structure in nature. Ultraviolet–visible (UV‐vis) absorption spectra of these ZnO nanostructures are investigated and a possible formation mechanism for the spindle‐like ZnO nanostructures is also proposed.     

Preparation of Sb2S3 nanomaterials with different morphologies via a refluxing approach

Single-crystalline antimony trisulfide (Sb₂S₃) nanomaterials with flower-like and rod-like morphologies were successfully synthesized under refluxing conditions by the reaction of antimony trichloride (SbCl₃) and thiourea with PEG400 and OP-10 as the surfactants. X-ray diffraction (XRD) indicates that the obtained sample is orthorhombic-phase Sb₂S₃ with calculated lattice parameters a=1.124 nm, b=1.134 nm and c=0.382 nm. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images show that the flower-like Sb₂S₃ is 9–10 μm in size, which is composed of thin leaves with thickness of 0.05–0.2 μm, width of 0.8–2.2 μm and length of 2.5–3 μm, and the rod-like Sb₂S₃ is 45–360 nm in diameter and 0.7–4 μm in length, respectively. UV–Vis analysis indicates that the band gap of Sb₂S₃ nanorods is 1.52 eV, suitable for photovoltaic conversion. A possible mechanism of formation was proposed. The effects of reaction time and surfactants on the growth of nanomaterials with different morphologies were also investigated.     

Synthesis of TiO2 nanorings and nanorods on TCO substrate by potentiostatic anodization of titanium powder

Various TiO₂ nanostructures, such as nanorings, nanorods were synthesized via potentiostatic anodization of titanium powder under different conditions. The morphology of the obtained TiO₂ nanostructures can be easily tuned by varying applied voltage. The crystal structure, compositional information and morphological structures were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectra (XPS) and field emission scanning electronic microscopy (FESEM). XRD and XPS analysis confirmed the anodization products were TiO₂. A possible formation mechanism was suggested on the basis of the shape evolution of TiO₂ nanostructures observed by FESEM. The results revealed that the applied voltage played an important role in the formation of various nanostructures. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Hydrothermal synthesis of anatase flower‐like nanostructures for photocatalytic degradation of dye

Flower‐like hierarchical nanostructures of titanium dioxide (TiO₂) have been synthesized in large scale by a facile and controlled hydrothermal and after annealing process. The morphologies of flower‐like hierarchical nanostructures are formed by self‐organization of several tens of radially distributed thin flakes with a thickness of several nanometers holding a larger surface area. The materials are characterized by Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X‐ray diffraction (XRD). The ultraviolet photocatalytic degradation of R6G dyes has been studied over this flower‐like hierarchical nanostructures and the activity is compared with that of commercial P25 TiO₂ under same conditions. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis of Cu vanadate nanorods for visible‐light photocatalytic degradation of gentian violet

Cu vanadate nanorods have been synthesized via the hydrothermal process using polymer polyvinyl pyrrolidone (PVP) as the surfactant. X‐ray diffraction (XRD) shows that the nanorods are composed of monoclinic Cu₅V₂O₁₀ phase. Scanning electron microscopy (SEM) observation shows that the diameter and length of the nanorods are 50–300 nm and 3 μm, respectively. PVP concentration, hydrothermal temperature and duration time play essential roles in the formation and sizes of the Cu vanadate nanorods. A PVP‐assisted nucleation and crystal‐growth process is proposed to explain the formation of the Cu vanadate nanorods. Gentian violet (GV) is used to evaluate the photocatalytic activities of the Cu vanadate nanorods under solar light. The GV concentration clearly decreases with increasing irradiation time, and content of the Cu vanadate nanorods. GV solution with the concentration of 10 mg L⁻¹ can be totally degraded under solar light irradiation for 4 h using 10 mg Cu vanadate nanorods. The Cu vanadate nanorods have good photocatalytic activities for the degradation of GV under solar light.     

Effects of synthesis conditions on the yields and properties of HZSM‐5

In the SiO₂‐Al₂O₃‐TPAOH‐NH₄OH system through a two‐step procedure, the effects of synthesis parameters on the yields and properties of HZSM‐5 were studied. As the feeding n(SiO₂)/n(Al₂O₃) ratio increased, the yields of synthesized samples were between 11% and 14% while the crystallinity tended to decrease at the ratio > 300. At the ratio of 150, the yield was 13.7% and the ratio of actual yield to theoretical yield was 93%. The sample shaped ellipse‐like particles of 3 × 10⁻⁶ m. At the n(NH₃)/n(SiO₂) ratio of 1.5, the yield was 13.1% and the sample showed regular ellipse‐like particles of 2 × 10⁻⁶ m. Too high dosage of NH₄OH lowered the yield and the crystallinity. The addition of seed crystal favored the HZSM‐5 synthesis in high crystallinity. At the addition amount of 4%, the yield reached 13.9% and the sample shaped in spherical particles of 0.5 × 10⁻⁶ m. Synthesized HZSM‐5 with a surface area of 455 m²·g⁻¹ and intrinsic acidity showed highly catalytic activity toward the methanol conversion to olefins reaction.     

Structural study of GexSb40−xS60 (x = 10, 20 and 30) glasses

The atomic structures of Ge–Sb–S ternary glasses have been investigated by using the neutron diffraction method. The structure factor, S(q), for Ge_xSb_40−xS₆₀ (x = 10, 20 and 30) has a first sharp diffraction peak (FSDP) at around 1.1 Å⁻¹. The oscillation in S(q) persisted up over 25 Å⁻¹ indicates that the chemical short-range order is presented in these glasses. The aspect of S(q) for Ge₁₀Sb₃₀S₆₀ is different from those for Ge₂₀Sb₂₀S₆₀ and Ge₃₀Sb₁₀S₆₀. These results show that the atomic structure changes drastically between Ge₁₀Sb₃₀S₆₀ and Ge₂₀Sb₂₀S₆₀. The short-range order of tetrahedral GeS₄ and pyramidal SbS₃ units seems to exist in the Ge_xSb_40−xS₆₀ (x = 10, 20 and 30) glasses.     

Synthesis of radial‐like ZnO structure by hydrothermal method with ZnSO4·7H2O and Zn(CH3COO)2·2H2O as zinc sources

Radial‐like ZnO structures were prepared using zinc sulfate (ZnSO₄·7H₂O) and zinc acetate [Zn(CH₃COO)₂·2H₂O] as zinc sources by a facile template‐free hydrothermal method in this paper. Structural and optical properties of radial‐like ZnO structures are characterized by X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), UV‐vis spectrophotometer and photoluminescence measurement (PL). It has been found that the distinct surface morphologies of radial‐like ZnO structures grown by different zinc sources. Slim radial‐like ZnO with a hexagonal wurtzite structure is grown by using ZnSO₄·7H₂O as zinc sources, whereas coarse radial‐like ZnO with zincite structure is achieved by zinc acetate. The UV‐vis absorption spectra of them both display an obvious and significant absorption in the ultraviolet region. The room temperature PL spectra of ZnO structures grown by two different zinc sources possess a common feature that consists of a strong ultraviolet (UV) peak and visible emission band.     

Crystal structure of N‐[(1Z)‐1‐(3‐methyl‐3‐phenylcyclobutyl)‐2‐thiomorpholin‐4‐ylethylidene] thiourea

The crystal structure of N‐[(1Z)‐1‐(3‐methyl‐3‐phenylcyclobutyl)‐2‐thiomorpholin‐4‐ylethylidene] thiourea (C₁₈H₂₆N₄S₂) has been determined by X‐ray crystallographic techniques. The compound crystallizes in the orthorhombic space group Pbca, with unit cell parameters: a = 15.692(3), b = 20.803(8), c = 11.979(6)Å, Z = 8, V = 3911(7)ų. The crystal structure was solved by direct methods and refined by full‐matrix least squares to a final R‐value of 0.084 for 1447 observed reflections [I > 2σ ( I ) ]. In the thiosemicarbazide moiety, the S = C bond length is 1.656(6), N‐C‐N angle is 115.6(5)°. The crystal structure is stabilized by the intermolecular N‐H...S hydrogen bonds. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)