Poly(vinylpyrrolidone)‐stabilized silver nanoparticles for strained‐silicon surface enhanced Raman spectroscopy

Poly(vinylpyrrolidone)‐stabilized silver nanoparticles deposited onto strained‐silicon layers grown on graded Si_1−xGe_x virtual substrates are utilized for selective amplification of the Si–Si vibration mode of strained silicon via surface‐enhanced Raman scattering spectroscopy. This solution‐based technique allows rapid, highly sensitive and accurate characterization of strained silicon whose Raman signal would usually be overshadowed by the underlying bulk SiGe Raman spectra. The analysis was performed on strained silicon samples of thickness 9, 17.5 and 42 nm using a 488 nm Ar⁺ micro‐Raman excitation source. The quantitative determination of strained‐silicon enhancement factors was also made. Copyright © 2011 John Wiley & Sons, Ltd.     

Investigations of the interactions of CO2, O3 and UV light with silver surfaces by in situ IRRAS/QCM and ex situ TOF-SIMS

The characterization of the reactions occurring during the atmospheric corrosion of silver surfaces at the metal-atmosphere interface is of great importance as only the exact knowledge of the degradation mechanisms enables the development of suitable corrosion inhibiting steps. For in situ surface analysis three complementary experimental techniques have been combined in order to study the surface chemistry of silver samples exposed to humidified air, CO₂, ozone (O₃) and ultraviolet (UV) light. In situ infrared reflection absorption spectroscopy (IRRAS) combined with a quartz crystal microbalance (QCM) as well as ex situ time of flight secondary ion mass spectrometry (TOF-SIMS) provide an overall picture of the processes occurring at the metal-atmosphere interface. Investigations were carried out by exposing polycrystalline silver samples to synthetic air containing 50-90% relative humidity (RH) and 250 ppm CO₂. Additionally, the samples were exposed to UV light or O₃ for certain time periods. The formation of the main corrosion products on the sample surfaces, depending on the relative humidity, O₃ content and UV light exposure could be observed in a time resolved way. These investigations reveal the different reaction mechanisms and reaction rates occurring on a silver surface.     

Adsorption of aniline on silver mirror studied by surface‐enhanced Raman scattering spectroscopy and density functional theory calculations

The adsorption of aniline on a silver mirror was studied by surface‐enhanced Raman scattering (SERS) spectroscopy and density functional theory (DFT) calculation methods. The normal Raman and SERS spectra of pure aniline liquid and its solutions were recorded by a micro‐Raman spectrometer with excitation at 514.5 nm. Orientation of the aniline molecule adsorbed on the Ag mirror is discussed. The results indicate that pure aniline is adsorbed on the surface of the Ag mirror with a tilted orientation. The conformer with the nitrogen atom interacting with the metal surface would be dominant. DFT calculations further confirm the experimental results that charge transfer (CT) takes place from the highest occupied molecular orbital(HOMO) of aniline to the singly occupied molecular orbital (SOMO) of the silver surface. In this paper, the frontier molecular orbital theory has been successfully used to explore the interaction between the aniline molecule and the silver surface. Copyright © 2011 John Wiley & Sons, Ltd.     

Damage and molecular changes under a laser beam in SEM‐EDX/MRS interface: a case study on iron‐rich particles

The control of damage to individual environmental particles by a laser beam during Raman spectroscopy carried out in ambient air is generally well understood. The nature and control of damage under vacuum conditions (e.g. in the scanning electron microscopy with energy X‐ray detection combined with micro‐Raman spectroscopy—interfaced SEM‐EDX/MRS) are more complex and less well comprehended. The physical and chemical processes that affect the damage caused to small particles by lasers still remain somewhat unclear, but certainly the atmosphere (vacuum/air) and the beam intensity have very significant influences. Furthermore, it has been determined that some particles (e.g. haematite), although stable under an electron beam, are damaged by the laser beam, hampering their analysis. Additionally, when simultaneous analyses by SEM/EDX and MRS are considered, the correct choice of the collection surface plays a crucial role. As a result, the following collection substrates were tested to determine their influence on the laser beam damage process to the particle: silver and aluminium foils and silicon wafers. A test study was performed using artificial examples of haematite (Fe₂O₃) particles. Exposure of Fe₂O₃ particles in vacuum to 514‐ and 785‐nm laser radiation often leads to their melting, transformation and evaporation. The dependence of the damage caused by the laser beam on the particle structure is reported here. Molecular and crystallographic changes have also been revealed. Formation of magnetite (as an effect of re‐crystallisation) and Raman inactive structures was detected. Copyright © 2010 John Wiley & Sons, Ltd.     

In situ nucleation and growth of silver nanoparticles in membrane materials: a controllable roughened SERS substrate with high reproducibility

A controllable roughened silver surface with high surface‐enhanced Raman scattering (SERS) activity and high reproducibility has been developed in this study. This silver surface was prepared by silver nucleation in polyelectrolyte multilayers (PEMs) and silver‐enlarged growth. First, the small Ag nuclei were synthesized by NaBH₄ in situ reduction of Ag ions on a surface of PEMs. Then the small Ag nuclei formed were effectively enlarged by using a mixture of commercially available reagents named Li Silver . The optical properties and morphologies of the silver substrates have been investigated by ultraviolet–visible (UV–vis) spectroscopy and atomic force microscopy (AFM). The UV–vis and AFM results revealed that the small Ag nuclei separately appeared on the PEMs after NaBH₄ in situ reduction. The size of the enlarged Ag nanoparticles can be easily controlled with the immersing cycle in Li Silver. 4‐Mercaptopyridine (4‐MPY) and Rhodamine 6G (R6G) have been used as Raman probes to evaluate the properties of the new SERS substrates. It has been found that the enhancement factor of R6G reached ∼10⁹ after treatment in Li Silver. Reproducibility has been investigated using the SERS signal intensity at 1094 cm⁻¹ of 4‐MPY. Signals collected over multiple spots within the same substrate resulted in a relative standard deviation (RSD) of 6.38%, while an RSD of 10.33% was measured in signals collected from different substrates. Copyright © 2008 John Wiley & Sons, Ltd.     

In situ QCM and TM-AFM investigations of the early stages of degradation of silver and copper surfaces

The early stages of atmospheric corrosion of pure copper and pure silver specimens were investigated performing in situ tapping mode atomic force microscopy (TM-AFM), in situ quartz crystal microbalance (QCM) and X-ray photoelectron spectroscopy (XPS). The information obtained by TM-AFM is the change of the topography of the sample surfaces with emphasis on the shape and lateral distribution of the corrosion products grown within the first hours of weathering. The simultaneously performed in situ QCM measurements are indicating the mass changes due to possibly occurring corrosive processes on the surface during weathering and are therefore a valuable tool for the determination of corrosion rates. Investigations were carried out in synthetic air at different levels of relative humidity (RH) with and without addition of 250 ppb SO₂ as acidifying agent. On a polished copper surface the growth of corrosion products could be observed by TM-AFM analysis at 60% RH without any addition of acidifying gases [M. Wadsak, M. Schreiner, T. Aastrup, C. Leygraf, Surf. Sci. 454-456 (2000) 246-250]. On a weathered copper surface the addition of SO₂ to the moist air stream leads to the formation of additional features as already described in the literature [M. Wadsak, M. Schreiner, T. Aastrup, C. Leygraf, Surf. Sci. 454-456 (2000) 246-250; Ch. Kleber, J. Weissenrieder, M. Schreiner, C. Leygraf, Appl. Surf. Sci. 193 (2002) 245-253]. Exposing a silver specimen to humidity leads to the degradation of the surface structure as well as to a formation of corrosion products, which could be detected by in situ QCM measurements. After addition of 250 ppb SO₂ to the moist gas stream an increase of the formed feature's volume on the silver surface could be observed by TM-AFM measurements. The results obtained additionally from the in situ QCM measurements confirm the influence of SO₂ due to a further increase of the mass of the formed corrosion layer (and therefore an increase of the calculated corrosion rates) compared to the data obtained from the experiment carried out in humidity only.     

Use of atomic layer deposition to improve the stability of silver substrates for in situ,high‐temperature SERS measurements

A method to stabilize silver surface‐enhanced Raman spectroscopy (SERS) substrates for in situ, high‐temperature applications is demonstrated. Silver island films grown by thermal evaporation were coated with a thin layer (from 2.5 to 5 nm) of alumina by atomic layer deposition (ALD), which protects and stabilizes the SERS‐active substrate without eliminating the Raman enhancement. The temporal stability of the alumina‐coated silver island films was examined by measurement of the Raman intensity of rhodamine 6G molecules deposited onto bare and alumina‐coated silver substrates over the course of 34 days. The coated substrates showed almost no change in SERS enhancement, while the uncoated substrates exhibited a significant decrease in Raman intensity. To demonstrate the feasibility of the alumina‐coated silver substrate as a probe of adsorbates and reactions at elevated temperatures, an in situ SERS measurement of calcium nitrate tetrahydrate on bare and alumina‐coated silver was performed at temperatures ranging from 25 to 400 °C. ALD deposition of an ultrathin alumina layer significantly improved the thermal stability of the SERS substrate, thus enabling in situ detection of the dehydration of the calcium nitrate tetrahydrate at an elevated temperature. Despite some loss of Raman signal, the coated substrate exhibited greater thermal stability compared to the uncoated substrate. These experiments show that ALD can be used to synthesize stable SERS substrates capable of measuring adsorbates and processes at high temperature. Copyright © 2009 John Wiley & Sons, Ltd.     

Conversion electron Mössbauer spectroscopy study of growth and nature of corrosion products on mild steel exposed to different environments

In this study, conversion electron Mössbauer spectroscopy (CEMS) has been utilized for identifying the nature of initial corrosion products formed on the surface of steel under different environments and measurement of relative thickness of corrosion products formed. CEMS studies on mild steel exposed under different environments, viz. mild steel sprayed with (1) distilled water (2) 3% NaCl and (3) mild steel exposed to SO₂ were carried out. The initial stable product of corrosion is found to be γ-FeOOH, which will transform into other oxyhydroxides and oxides, depending on environments. The mechanisms for the corrosion processes occurring under different conditions are also discussed.     

Raman investigations of TiO2 nanotube substrates covered with thin Ag or Cu deposits

A tubular array of TiO₂ nanotubes on Ti matrix was used as a support for Ag or Cu sputter‐deposited layers intended for surface‐enhanced Raman scattering (SERS) investigations. The composite samples of Ag/TiO₂–nanotube/Ti and Cu/TiO₂–nanotube/Ti were studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) [and scanning Auger microscopy (SAM)] to reveal their characteristic morphological and chemical features. Raman spectra of pyridine (as a probe molecule) were measured after it had been adsorbed on the TiO₂–nanotube/Ti substrates covered with thin Ag or Cu deposit as well as on the bulk electrochemically roughened Ag or Cu reference substrates. It was found that the SERS spectra measured for pyridine adsorbed on the bulk silver substrate were significantly different than the spectra measured on the TiO₂–nanotube/Ti substrates covered the Ag layer. The spectra measured for pyridine adsorbed on the Ag/TiO₂–nanotube/Ti suggest that on the surface of such a composite substrate there are many Lewis acidic sites. Spectra typical for pyridine adsorbed on acidic sites were observed even after deposition of a relatively thick silver layer (e.g. an Ag layer with an average thickness of 80 nm) on the TiO₂–nanotube/Ti support. Our findings suggest that TiO₂–nanotube/Ti support is a promising substrate for the preparation of metallic nano‐clusters on a support containing acidic active sites. Copyright © 2009 John Wiley & Sons, Ltd.     

Micro‐Raman innovative methodology to identify Ag–Cu mixed sulphides as tarnishing corrosion products

Mixed Cu–Ag alloys with different compositions have been produced and subjected to an accelerated sulphidation process which causes the development of a mixed sulphide‐rich corroded film on their surface. It was called tarnishing, that is, the formation of a blue‐brownish patina when Cu–Ag alloys are exposed in a sulfur‐containing atmosphere. The structures of the pristine alloys have been determined by the combined analytical techniques as scanning electron microscopy energy dispersive X‐ray microanalysis and X‐ray diffraction. The experimental conclusions confirmed the occurrence of micro phase separation with the formation of different dendritic domains of about 10 µm in width. The sulphidized samples were firstly investigated by optical microscopy and X‐ray diffraction in order to verify the homogeneity of the patina and to identify the different AgCuS phases appearing on the alloy surfaces. It was observed that, despite the inherent micro‐heterogeneity of the alloys, the sulphide layer was throughout uniform in composition at the micro‐scale. The complex scenario of the relative stability of all the various mixed sulphides involved was then explored by micro‐Raman spectroscopy (μ‐RS), pointing out that the Cu‐for‐Ag substitution in the crystal lattice of the mixed Ag–Cu sulphides caused a monotonous blue shift of the vibrational wavenumbers in Raman spectra. This study has unveiled microscopic details of the tarnishing process, furnishing an innovative, cheap and non‐destructive methodology based on μ‐Raman spectroscopy for the evaluation of the silver‐copper artefacts via the compositions of their corroded products. Copyright © 2016 John Wiley & Sons, Ltd.     

Silver‐coated inverse opals formed from polystyrene spheres for surface‐enhanced Raman scattering

We have developed a new substrate for surface‐enhanced Raman scattering (SERS) measurements involving a thin silver layer deposited over an ion‐etched TiO₂ inverse opal. The latter is formed by chemically infiltrating a polystyrene opal array with TiO₂ followed by a thermal decomposition of the spheres. The SERS response of the these substrates is examined for several sphere sizes and lasers wavelengths; the results show that such substrates yield high enhance factors, comparable to substrates involving a silver layer deposited directly on a polystyrene opal array. Copyright © 2010 John Wiley & Sons, Ltd.     

Atmospheric corrosion in the Gulf of México

The corrosion products on steels exposed at two sites in Campeche, México and one site at Kure Beach, USA, have been investigated to determine the extent to which different marine conditions and exposure times control the oxide formation. The corroded coupons were analyzed by Mössbauer, Raman and infrared spectroscopy as well as X‐ray diffraction, in order to completely identify the oxides and map their location in the corrosion coating. The coating compositions were determined by Mössbauer spectroscopy using a new parameter, the relative recoilless fraction (F-value) which gives the atomic fraction of iron in each oxide phase from the Mössbauer sub‐spectral areas. For short exposure times, less than three months, an amorphous oxyhydroxide was detected after which a predominance of lepidocrocite (γ-FeOOH), and akaganeite (β-FeOOH) were observed in the corrosion coatings with the fraction of the later phase increasing at sites with higher atmospheric chloride concentrations. The analysis also showed that small clusters of magnetite (Fe₃O₄), and maghemite (γ(Fe₂O₃), were seen in the micro-Raman spectra but were not always identified by Mössbauer spectroscopy. For longer exposure times, goethite (α-FeOOH), was also identified but little or no β-FeOOH was observed. It was determined by the Raman analysis that the corrosion products generally consisted of inner and outer layers. The protective layer, which acted as a barrier to slow further corrosion, consisted of the α-FeOOH and nano-sized γ-Fe₂O₃ phases and corresponded to the inner layer close to the steel substrate. The outer layer was formed from high γ-FeOOH and low α-FeOOH concentrations.     

A hybrid substrate for surface‐enhanced Raman scattering spectroscopy: coupling metal nanoparticles to strong localised fields on a micro‐structured surface

Electromagnetic coupling between localised plasmons on metal nanoparticles and the strong localised fields on a micro‐structured surface is demonstrated as a means to increase the enhancement factor in surface‐enhanced Raman scattering (SERS) spectroscopy. Au nanoparticles of diameter 20 nm were deposited on a micro‐structured Au surface consisting of a periodic array of square‐based pyramidal pits (Klarite). The spectra of 4‐aminothiophenol (4‐ATP) were compared before and after deposition of Au nanoparticles on the micro‐structured surface. The addition of Au nanoparticles is shown to provide significantly higher signal intensities, with improvements of the order of ∼10³ per molecule compared with spectra obtained from the micro‐structured substrate alone. This hybrid approach offers promise for combining nanoparticles with micro‐ and nano‐structured surfaces in order to design SERS substrates with higher sensitivities. Copyright © 2011 John Wiley & Sons, Ltd.     

TiO2 thin films for spintronics application: a Raman study

We present the results of a systematic study performed by micro‐Raman spectroscopy on pure anatase, pure rutile and mixed anatase–rutile TiO₂ thin films, deposited by radio frequency magnetron sputtering on quartz substrates, with different thicknesses. The crystal structures of the as‐deposited films were unambiguously determined and a good crystalline homogeneity was revealed by a systematic mapping of the samples. In the mixed‐phase films, the relative amount of the two phases was monitored by a simple analysis of the components of the multi‐Lorentzian fitting curves. For the single‐phase films, the influence of the thickness and the effect of different thermal treatments, carried out to obtain series of thin films differing only for oxygen content, are discussed. The analysis of the scattered light has provided indication about the presence of an interface layer between the substrate and the film, which can play a role in driving the interesting magnetic properties exhibited by our samples, which are of potential usefulness for spintronics application. The results obtained from other techniques are briefly reported and discussed in relation to our systematic Raman characterization. This study points out how Raman investigation can provide suggestions toward the understanding of the complex physical phenomena leading to room‐temperature ferromagnetism in TiO₂ thin films. Copyright © 2009 John Wiley & Sons, Ltd.     

EDXRF analysis of metal artefacts from the grave goods of the Royal Tomb 14 of Sipán,Peru

Several metallic sheets (about 1 mm thick) from the grave goods of the Royal Tomb 14 (Sipán, Peru) were characterised by energy dispersive X‐ray fluorescence analysis, using both a portable instrument and a capillary collimated spectrometer to investigate details, and micro‐Raman spectroscopy. The samples, belonging to the clothing of the warrior priest, resulted composed of thin copper sheets or tumbaga (natural alloy of copper, silver and gold). They were unearthed covered with typical green patina, formed during their long burial and characterised mainly by copper minerals, such as malachite, atacamite and magnetite identified with micro‐Raman spectroscopy. Due to deterioration of the original alloy, the artefacts analyzed in this work were rather fragile and could not resist hard polishing aimed at cleaning off corrosion products. So a non‐destructive qualitative EDXRF analysis was performed to identify the elemental composition of the metal alloy and a quantitative estimation was made applying the fundamental parameter method. The presence of superficial patina layer and the non‐homogeneous composition was also taken into account during calculation. The data obtained, compared to published results from several artefacts found in the nearby tombs, have been treated with a hierarchical statistic analysis. Copyright © 2011 John Wiley & Sons, Ltd.     

Rapid screening of sildenafil and tadalafil adulterated in healthcare products by Micro‐Raman spectroscopy

Sildenafil and tadalafil are inhibitors of phosphodiesterase type 5, which are frequently added into healthcare products. The objective of this study was to evaluate the possibility of using micro‐Raman spectroscopy as a non‐destructive technique to screen for sildenafil and tadalafil in adulterated healthcare products. Using a viewing microscope, the suspect area of healthcare products was selected, which had a discernable crystal form or shape from the surrounding zone. Optimization of instrumental parameters of the Raman spectrometer was chosen to reduce the background fluorescence, and the Raman spectra were collected. The spectra collected were compared with the standard Raman spectra of pure sildenafil and tadalafil. Samples with an identifiable Raman signature to that of sildenafil or tadalafil could be confirmed using liquid chromatography–mass spectrometry (LC/MS). Additionally, wavelet denoising combined with similarity calculation was used to establish an automated approach for discrimination of adulterated healthcare products. Correlation coefficient was chosen for similarity calculation based on the spectra collected and the standard Raman spectra of pure sildenafil and tadalafil. We compared ten samples, secured by administrative authorities in Shanghai, to analyse and demonstrate the capabilities of our proposed method. We established six samples containing sildenafil or tadalafil warranting analysis using LC/MS. Thus, the use of micro Raman spectroscopy provides a quick, convenient and non‐destructive method for screening adulterated chemicals in healthcare products. Raman spectroscopy combined with similarity calculation requires little training after spectra library is developed, thus showing great promise to identify the adulterated healthcare products in the future. Copyright © 2012 John Wiley & Sons, Ltd.     

Photochemical decoration of silver nanoparticles on ZnO nanowires as a three‐dimensional substrate for surface‐enhanced Raman scattering measurement

To increase the sensitivity in surface‐enhanced Raman scattering (SERS) measurement, a three‐dimensional (3D) SERS substrate was prepared by the decoration of silver nanoparticles (AgNPs) on the side walls of ZnO nanowires. The prepared 3D SERS substrates provide the advantages of highly loaded density of AgNPs, with a large specific surface area to interact with analytes, and the ease for the analytes to access the surfaces of AgNPs. To prepare the substrates, ZnO nanowires were first grown on a glass plate by wet chemical method. By treating SnCl₂ on the surfaces of ZnO nanowires, Ag seeds could be formed on the side wall of the ZnO nanowires, which were further grown to a suitable size for SERS measurements via photochemical reduction. To optimize and understand the influences of the parameters used in preparation of the substrates, the reaction conditions were systematically adjusted and examined. Results indicated that AgNPs could be successfully decorated on the side wall of the ZnO nanowires only by the assistances of SnCl₂. The size and density of AgNPs were affected by both the concentration of silver nitrate and the irradiation time. With optimized condition, the prepared 3D substrates provided an enhancement factor approaching 7 orders of magnitude compared with conventional Raman intensity. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman micro‐spectroscopy of DNA/RNA bases adsorbed on pyroxene rocks as a test of in situ search for life traces on Mars

SERS spectroscopy with 785‐nm laser excitation minimizing fluorescence emission is exploited for remote analysis of life traces in an extraterrestrial environment. Adenine and guanine, nucleobases present in both DNA and RNA strands, and microRNA containing adenine and guanine have been used as testing ligands for identifying traces of nucleic acids in Martian rocks and sediments. SERS spectra of these nucleobase samples adsorbed on pyroxene substrates have been investigated with micro‐Raman apparatus in the absence of sample manipulation and inducing the signal enhancement by deposition of silver colloidal nanoparticles over the pyroxene/nucleobase substrates. An order‐of‐magnitude estimate of the sample amount responsible for the SERS spectra is given. Copyright © 2009 John Wiley & Sons, Ltd.     

Deterioration of iron archaeological artefacts: micro‐Raman investigation on Cl‐containing corrosion products

Deterioration after excavation of archaeological iron artefacts buried in soil is often associated with the presence of chlorinated phases in corrosion products, leading to serious problems for conservation of metallic objects of cultural heritage. Therefore, in order to better understand the corrosion process related to the presence of chlorine, some high‐resolution techniques of material characterisation are implemented. The analyses are realised on cross sections of corroded iron objects excavated from archaeological sites dated from the 12th to the 16th century A.D. Cl‐containing phases appear even when the Cl level in the water is low. In addition to the common oxy‐hydroxide‐containing chloride, akaganeite (β–FeOOH) often mentioned in the literature, a ferrous hydroxychloride β–Fe₂(OH)₃Cl was also found in the corrosion layers. Moreover, part of the study is based on the preparation and desalinisation of pure akaganeite powder in order to characterise the influence of the chloride content on its crystalline structure as characterised by Raman spectroscopy. Copyright © 2007 John Wiley & Sons, Ltd.     

Hydration and carbonation of monoclinic C2S and C3S studied by Raman spectroscopy

We present a micro‐Raman study on the hydration and carbonation of the main silicate phases of Portland cement, i.e. monoclinic dicalcium silicate (C₂S) and monoclinic tricalcium silicate (C₃S). We investigate the reaction products and the loss of crystallinity induced by hydration on these two compounds. In the CO₂‐contaminated pastes we find that calcite, aragonite, and vaterite are inhomogeneously formed. We study sample cross sections to evaluate the maximum depth at which CaCO₃ is formed. We find that carbonation is limited to the first 500–1000 µm from the surface in the C₃S pastes, while in C₂S pastes CaCO₃ is formed well beyond this depth. Our results show the great potential of Raman spectroscopy in the study of the chemistry of cements. Copyright © 2006 John Wiley & Sons, Ltd.