Efficient Synthesis of α‐Benzylidene‐γ‐methyl‐γ‐butyrolactones

A concise synthesis of α‐benzylidene‐γ‐methyl‐γ‐butyrolactones 5a – g from substituted benzaldehydes is described. Compounds 1a – g on reaction with phosphorane 2 , provide the pentenoates 3a – g , which can be hydrolyzed to the acids 4a – g . The latter are cyclized to the corresponding butyrolactones 5a – g in excellent yields. The pentenoates 3a – g , on acid catalyzed cyclization, also provide 5a – g in very high yields.     

The chemistry and physics of zinc oxide surfaces

Metal oxides are virtually everywhere – only gold has the property not to form an oxide on its surface when exposed to the ambient. As a result, understanding the physics and chemistry of oxide surfaces is a topic of pronounced general interest and, of course, also a necessary prerequisite for many technical applications. The most important of these is certainly heterogeneous catalysis, but one has to realize that – under ambient conditions – virtually all phenomena occurring at liquid/metal and gas/metal interfaces are determined by the corresponding oxide. This applies in particular to friction phenomena, adhesion and corrosion. A necessary – but not necessarily sufficient – condition for unravelling the fundamentals governing this complex field is to analyze in some detail elementary chemical and physical processes at oxide surfaces. Although the Surface Science of metal surfaces has seen a major progress in the past decades, for oxides detailed experimental investigations for well-defined single crystal surfaces still represent a formidable challenge – mostly because of technical difficulties (charging), but to some extent also due to fundamental problems related to the stabilization of polar surfaces. As a result, the amount of information available for this class of materials is – compared to that at hand for metals – clearly not satisfactory. A particular disturbing lack of information is that about the presence of hydrogen at oxide surfaces – either as hydroxy-species or in form of metal hydrides.In the present review we will summarize recent experimental and theoretical information which has become available from single crystal studies on ZnO surfaces. While the number of papers dealing with another oxide, rutile TiO₂, is significantly larger (although titania does not exhibit a polar surface), also for zinc oxide a basis of experimental and theoretical knowledge as been accumulated, which – at least for the non-polar surfaces – allows to understand physico-chemical processes on an atomic level for an increasing number of cases. In particular with regards to the interaction with hydrogen a number of – often surprising – observations have been reported recently. Some of them carry implications for the behaviour of hydrogen on oxide surfaces in general. We will present the currently available information for both, experiment and theory, and demonstrate the rather large variety of this material’s surface properties.     

Mass spectrometry of 3-substituted 4-hydroxyisoquinolines and their derivatives

Under electron impact, 3-aryl-4-hydroxyisoquinolines form [M – H]⁺, [M – CO]⁺ and [M – H – CO]⁺ ions with a subsequent elimination of HCN or CH₃CN. A cyclic structure for the [M – H]⁺ ion is suggested. The primary act of fragmentation of the corresponding methyle ether derivatives is the loss of CH₃?, as well as H?; the further fragmentatio is similar to that described above. It has been established that the unusual [M – H]⁺, [M – OH]⁺ and [M – CH₅?]⁺ ions are formed when 8 fragments. Fragmentation schemes for all compounds are proposed based upon high resolution mass spectra and deuterated analogues.     

Photochemische Umwandlungen, 42 [1] Photoisomerisierungen im 5-Isopropyliden-tetracyclo-[4.3.0.02,4.03,7]non-8-en-System. Vorläufige mitteilung

Direct photochemical excitation of the tetracyclo[4.3.0.0.^2,4.0^3,7]non-8-enes 7a – d leads to a mixture of the isomers 8a – d and 10a – d , with the former being the main products. On sensitization by acetone the formation of 10a – d is clearly favored. The cis-bishomobenzenes 9a – d are the postulated intermediates. Spectral data and some thermal reactions are described.     

Cycloaddition von Heterocumulenen an CN-Bindungssysteme. 1. Mitteilung. Perhydro-s-triazindione und Perhydro-s-triazinyl-harnstoffe aus N,N,N′-trisubstituieten Formamidinen und Isocyanaten

The addition of methyl isocyanate to N,N-dimethyl-N′-arylformamidines 4d – 4r leads to the perhydro-s-triazine-diones 5d – 5o and to the s-triazinylureas 10a – 10k . The mechanism of formation is discussed. The addition of the arylisocyanates 18a – 18p to the N,N,N′-trialkylformamidines 9 and 27a – 27i furnishes the expected 1,4-cycloaddition products 26 and 27 in good yields. The N,N-di-isopropyl-N′-alkylformamidines 27j – 271 , however, do not undergo 1,4-dipolar cycloadditions and react with the arylisocyanate 18b to yield the alkyl isocyanates 31a – 31c and N,N-diisopropyl-N′-(p-chlorphenyl)-formamidine 32 exclusively.     

7-Halogenated 7-Deaza-2′-deoxyinosines

The synthesis of the 7-deaza-2′-deoxyinosine derivatives 3a – c with chloro, bromo, and iodo substituents at position 7 is described. Glycosylation of the 7-halogenated 6-chloro-7-deazapurines 4a – c or of the 7-halogenated 6-chloro-7-deaza-2-(methylthio)purines 9a – c with 2-deoxy-3,5-di-O-(4-toluoyl)-α-D -erythro-pentofuranosyl chloride ( 5 ) furnished the intermediates 7a – c and 11a – c , respectively, which gave, upon deprotection, the desired nucleosides 3a – c .     

β-Cleavage of Bis(homoallylic) Potassium Alkoxides. Preparation of 3-Hydroxypropyl and 4-Hydroxybutyl Propenyl Ketones from γ- and δ-Lactones. Synthesis of (±)-Rose oxide

Starting from γ- and δ-lactones 1 – 3 , a two-step preparation of 3-hydroxypropyl and 4- hydroxybutyl propenyl ketones 10 – 18 is described, involving as the key step the β-cleavage of the bis(homoallylic) potassium alkoxides 4a – 9a . The novel methodology is illustrated by a short synthesis of (±)-rose oxide( 20 ).     

4‐Substituted 2,3‐Dihydroisoxazoles as Masked Azomethine Ylides: Access to Pyrrole Derivatives by 1,5‐ and 1,7‐Dipolar Electrocyclizations of Enynyl Derivatives

The enynyl‐substituted 2,3‐dihydroisoxazoles (‘isoxazolines') 9 – 14 were prepared by highly (Z)‐selective Peterson olefination reaction from the corresponding carbaldehydes 6 – 8 . On short‐time thermolysis (280 – 406°/10 s) the TMS derivatives 9 – 11 give rise to the annulated pyrrolines 18 – 20 , which, in some cases, suffer CH₄ elimination affording the pyrroles 15 – 17 . In contrast, thermolysis of the terminal alkyne derivatives 12 – 14 leads to the bicyclic compounds 21 – 23 . The reaction pathways are discussed on the basis of the formation of conjugated azomethine ylides as key intermediates, which either undergo a 1,5‐cyclization to 18 – 20 or a 1,7‐ring‐closure affording cycloallene intermediates of type V , which are further transformed into the azepino pyrroles 21 – 23 .     

Synthesis of Thiazole and Fused Thiazolo Derivatives

The syntheses of thiazole and fused thiazolo derivatives 2 – 4 , 6 – 8 , 10a – 11b , 13 – 16 from heterocylic isothiocyanates 1 , 5 , 9 , and 12 bearing an ortho ester group and bifunctional reagents, such as substituted propargylamines, is described. Different regioselectivity of intramolecular nucleophilic attack of the thiourea S-atom on the C ? C bond, resulting in the formation of both thiazolo and thiazino derivatives, as well as NMR structure elucidation are discussed.     

Synthesis of Monosaccharide‐Derived Spirocyclic Cyclopropylamines and Their Evaluation as Glycosidase Inhibitors

The glucose‐, mannose‐, and galactose‐derived spirocyclic cyclopropylammonium chlorides 1a – 1d, 2a – 2d and 3a – 3d were prepared as potential glycosidase inhibitors. Cyclopropanation of the diazirine 5 with ethyl acrylate led in 71% yield to a 4 : 5 : 1 : 20 mixture of the ethyl cyclopropanecarboxylates 7a – 7d , while the Cu‐catalysed cycloaddition of ethyl diazoacetate to the exo‐glycal 6 afforded 7a – 7d (6 : 2 : 5 : 3) in 93–98% yield (Scheme 1). Saponification, Curtius degradation, and subsequent addition of BnOH or t‐BuOH led in 60–80% overall yield to the Z‐ or Boc‐carbamates 11a – 11d and 12a – 12d , respectively. Hydrogenolysis of 11a – 11d afforded 1a – 1d , while 12a – 12d was debenzylated to 13a – 13d prior to acidic cleavage of the N‐Boc group. The manno‐ and galacto‐isomers 2a – 2d and 3a – 3d , respectively, were similarly obtained in comparable yields (Schemes 2 and 4). Also prepared were the differentially protected manno‐configured esters 24a – 24d ; they are intermediates for the synthesis of analogous N‐acetylglucosamine‐derived cyclopropanes (Scheme 3). The cyclopropylammonium chlorides 1a – 1d, 2a – 2d and 3a – 3d are very weak inhibitors of several glycosidases (Tables 1 and 2). Traces of Pd compounds, however, generated upon catalytic debenzylation, proved to be strong inhibitors. PdCl is, indeed, a reversible, micromolar inhibitor for the β‐glucosidases from C. saccharolyticum and sweet almonds (non‐competitive), the β‐galactosidases from bovine liver and from E. coli (both non‐competitive), the α‐galactosidase from Aspergillus niger (competitive), and an irreversible inhibitor of the α‐glucosidase from yeast and the α‐galactosidase from coffee beans. The cyclopropylamines derived from 1a – 1d or 3a – 3d significantly enhance the inhibition of the β‐glucosidase from C. saccharolyticum by PdCl , lowering the K_i value from 40 μM (PdCl ) to 0.5 μM for a 1 : 1 mixture of PdCl and 1d . A similar effect is shown by cyclopropylamine, but not by several other amines.     

Neue β-Lactam-Antibiotika. Über Derivate der 3-Hydroxy-7-amino-ceph-3-em-4-carbonsäure. Modifikationen von Antibiotika, 10. Mitteilung [1]

3-Hydroxy-ceph-3-em-esters 5 a – c , versatile intermediates for the preparation of new β-lactam antibiotics, were obtained by ozonolysis of the corresponding 3-methylidene-esters 3 a – c . Reduction and elimination gave the 3-unsubstituted ester 13 ; derivatives 16 a – c and 20 – 22 resulted from O-alkylation. The 3-methoxy-esters 16 a – c were converted into the corresponding acids 23 a – d . Several other transformations of the β-ketoester system are described.     

Ein neuer Reaktionsweg zu 1, 3-Dicarbonylderivaten. Modelluntersuchungen am A/B-Teil von 3-Oxo-5α-steroiden

A New Route to 1, 3-Dicarbonyl Derivatives, Model Investigations on the A/B-Part of-3-Oxo-5α-steroids Starting from 1 the 1, 3-dicarbonyl compounds 4a – d were synthetized via the enynes 2a – e and the relatively unstable epoxides 3a – d . The latter were reacted with 95% formic acid to gave 4a – d ; small amounts of the furane derivatives 5a – c were identified as by-products in this last step. In the presence of catalytic amounts of HgSO₄ the epoxides 3a – c yielded with 95% formic acid the furanes 5a – c , but no detectable amounts of 4a – c .     

Protection of carbon steel with superhydrophobic coating against corrosion in NaCl solution

Corrosion and kinetics of partial electrode reactions on carbon steel St3 with superhydrophobic coatings of three types were studied in 0.5 M NaCl and 50 g/L NaCl +400 mg/L H₂S solutions. The investigations were carried out on electrodes made of carbon steel St3 with a chemical composition, wt. %: C – 0.20; Mn – 0.50; Si – 0.15; P – 0.04; S – 0.05; Cr – 0.30; Ni – 0.20; Cu – 0.20, and Fe – 98.36. To obtain the type I coating, the metal surface was textured by an IR laser radiation of nanosecond duration followed by chemisorption of fluorobutylsilane out of a solution in n-decane. To obtain a coating of type II, a nanoscale composite layer consisting of aggregates of aerosil nanoparticles was applied additionally to the outcome of type I method. To obtain a coating of type III, the metal surface after being textured by the infrared (IR) laser radiation of nanosecond duration was followed by chemisorption of fluoroxy silane. The influence of duration τ of the medium corrosive impact on protective effect of the superhydrophobic coating is considered. It was shown that upon reaching a steady state (after 72 h), the corrosion rate of steel with a superhydrophobic coating of I and II types in a 0.5 M NaCl solution is reduced by 23 ± 3 times compared with unprotected samples. Approximately the same picture is characteristic of electrodes with a coating of type III in a solution of 50 g/L NaCl +400 mg/L H₂S.     

Mononuclear Tetraamineplatinum(II) Complexes: Synthesis,Anticancer Activity,DNA Binding,and Cellular Uptake

The synthesis of three bis[(tert‐butoxy)carbonyl]‐protected (tetramine)dichloroplatinum complexes 2a – c of formula cis‐[PtCl₂(LL)] and of their cationic deprotected analogs 3a – c and their evaluation with respect to in vitro cytotoxicity, intramolecular stability, DNA binding, and cellular uptake is reported. The synthesis comprises the complexation of K₂[PtCl₄] with di‐N‐protected tetramines 1a – c to give 2a – c and subsequent acidolysis, yielding 3a – c . The cytotoxicity of the complexes is in direct relation to the length of the polyamine. Complexes 3a – c display a significant higher affinity for CT DNA as well as for cellular DNA in A2780 cells than cisplatin.     

Product Inhibited Enzymatic Reactions on the Rotating Disk Electrodes

A model of cyclic staircase voltammetry of enzymatic reactions on the rotating disk electrode is developed and the inhibition by the product is investigated. The responses are mostly time – dependent current – potential curves with maxima in the forward but not in the backward branch. If the maxima appear in both branches, the inhibition is potential – dependent either directly or indirectly. The source of the second maximum is explained.     

Regioselective 1,3‐Dipolar Cycloadditions of (1Z)‐1‐(Arylmethylidene)‐5,5‐dimethyl‐3‐oxopyrazolidin‐1‐ium‐2‐ide Azomethine Imines to Acetylenic Dipolarophiles

The 5,5‐dimethylpyrazolidin‐3‐one ( 4 ), prepared from ethyl 3‐methylbut‐2‐enoate ( 3 ) and hydrazine hydrate, was treated with various substituted benzaldehydes 5a – i to give the corresponding (1Z)‐1‐(arylmethylidene)‐5,5‐dimethyl‐3‐oxopyrazolidin‐1‐ium‐2‐ide azomethine imines 6a – i . The 1,3‐dipolar cycloaddition reactions of azomethine imines 6a – h with dimethyl acetylenedicarboxylate (=dimethyl but‐2‐ynedioate; 7 ) afforded the corresponding dimethyl pyrazolo[1,2‐a]pyrazoledicarboxylates 8a – h , while by cycloaddition of 6 with methyl propiolate (=methyl prop‐2‐ynoate; 9 ), regioisomeric methyl pyrazolo[1,2‐a]pyrazolemonocarboxylates 10 and 11 were obtained. The regioselectivity of cycloadditions of azomethine imines 6a – i with methyl propiolate ( 9 ) was influenced by the substituents on the aryl residue. Thus, azomethine imines 6a – e derived from benzaldehydes 5a – e with a single substituent or without a substituent at the ortho‐positions in the aryl residue, led to mixtures of regioisomers 10a – e and 11a – e . Azomethine imines 6f – i derived from 2,6‐disubstituted benzaldehydes 5f – i gave single regioisomers 10f – i .     

The unusual fragmentation of long‐chain feruloyl esters under negative ion electrospray conditions

Long‐chain ferulic acid esters, such as eicosyl ferulate ( 1 ), show a complex and analytically valuable fragmentation behavior under negative ion electrospay collision‐induced dissociation ((?)‐ESI‐CID) mass spectrometry, as studied by use of a high‐resolution (Orbitrap) mass spectrometer. In a strong contrast to the very simple fragmentation of the [M + H]⁺ ion, which is discussed briefly, the deprotonated molecule, [M – H]^?, exhibits a rich secondary fragmentation chemistry. It first loses a methyl radical (MS²) and the ortho‐quinoid [M – H – Me]^‐? radical anion thus formed then dissociates by loss of an extended series of neutral radicals, C_nH_2n + 1^? (n = 0–16) from the long alkyl chain, in competition with the expulsion of CO and CO₂ (MS³). The further fragmentation (MS⁴) of the [M – H – Me – C₃H₇]^? ion, discussed as an example, and the highly specific losses of alkyl radicals from the [M – H – Me – CO]^‐? and [M – H – Me – CO₂]^‐? ions provide some mechanistic and structural insights.     

High-performance thin-layer chromatographic standardization and quantification of marker compounds in an Ayurvedic polyherbal formulation: Krishnadi Churna

JPC – Journal of Planar Chromatography – Modern TLC - The present era is witnessed by the increasing demand for herbal medicine. Therefore, the preparation of herbal drugs is warranted...     

RP-HPLC Separation of Highly Charged Quaternary Ammonium Salts

Abstract

The reverse phase HPLC separation of polycationic viologenes 1 – 4 and macrotricyclic quaternary ammonium salts 5 – 8 using ion pair conditions is described. Whereas the compounds 1 – 4 could be analysed on any of 4 stationary RP-18 phases tested, the cage compounds 5 – 8 were much more sensitive to the source of the matrix material. Optimal separation conditions for the latter up to eightfold positively charged macrocycles employ sodium perchlorate in acidic aqueous methanol using Nucleosil RP-18 or Lichrospher CH-18 columns.