Synthesis,characterization, and application of griseofulvin surface molecularly imprinted polymers as the selective solid phase extraction sorbent in rat plasma samples

In present study, an investigation was carried out to develop and validate an analytical method for the selective extraction and determination of griseofulvin (GSF) from plasma samples. For this purpose, a rational approach was made to synthesize and characterize the surface molecularly imprinted polymers (SMIPs). The SMIPs were utilized as solid phase extraction (SPE) sorbents. The SMIPs were prepared by using GSF as template molecule on the surface of modified silica particles through a non-covalent technique. The particles demonstrated high adsorption capacity (119.1 µg/mL), fast adsorption equilibrium time (30 min) and good recognition selectivity for the template drug. The scanning electron microscopy and infrared spectroscopy were used to explain the structural and morphological characteristics of the SMIPs and surface non-imprinted polymers. The SPE method was combined with HPLC for plasma analysis. The method validation results demonstrated that the established method possessed good linearity for GSF ranging from 0.1 to 50 µg/mL (R² = 0.997). The limit of detection for this method was 0.02 µg/mL for rat plasma samples. The recoveries of GSF from spiked plasma samples were (90.7–97.7%) and relative standard deviations were (0.9–4.5%). Moreover, the SMIPs as selective SPE sorbent can be reused more than 8 times which is a clear advantage over commercial SPE sorbents. Finally, the usefulness of the proposed strategy was assessed by extraction and detection of GSF in real rat plasma samples.     

Exogenous pulmonary surfactant: A review focused on adjunctive therapy for severe acute respiratory syndrome coronavirus 2 including SP-A and SP-D as added clinical marker

Type I and type II pneumocytes are two forms of epithelial cells found lining the alveoli in the lungs. Type II pneumocytes exclusively secrete ‘pulmonary surfactants,’ a lipoprotein complex made up of 90% lipids (mainly phospholipids) and 10% surfactant proteins (SP-A, SP-B, SP-C, and SP-D). Respiratory diseases such as influenza, severe acute respiratory syndrome coronavirus infection, and severe acute respiratory syndrome coronavirus 2 infection are reported to preferentially attack type II pneumocytes of the lungs. After viral invasion, consequent viral propagation and destruction of type II pneumocytes causes altered surfactant production, resulting in dyspnea and acute respiratory distress syndrome in patients with coronavirus disease 2019. Exogenous animal-derived or synthetic pulmonary surfactant therapy has already shown immense success in the treatment of neonatal respiratory distress syndrome and has the potential to contribute efficiently toward repair of damaged alveoli and preventing severe acute respiratory syndrome coronavirus 2–associated respiratory failure. Furthermore, early detection of surfactant collectins (SP-A and SP-D) in the circulatory system can be a significant clinical marker for disease prognosis in the near future.     

Progress in the design and synthesis of viscosupplements for articular joint lubrication

Throughout a lifetime, articular joints experience many loading cycles and are prone to mechanical degradation. To safeguard the cartilage in these joints, the synovial fluid acts as a natural lubricant. However, degenerative joint diseases, like osteoarthritis, alter the composition of synovial fluid, diminishing its protective properties. In such cases, exogenous lubricants or viscosupplements can be injected to enhance the compromised synovial fluid's function. Scientists are now developing next-generation viscosupplements, based on hyaluronic acid (HA), that can better bind to and adhere to cartilage. Additionally, non-HA-based viscosupplements offer benefits over HA-based ones, as they possess more intricate molecular architectures, such as dendrimer or bottlebrush-like structures. These viscosupplements draw inspiration from natural molecules present in synovial fluid, providing them with a distinct advantage.     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.     

Surfactants – Compounds for inactivation of SARS-CoV-2 and other enveloped viruses

We provide here a general view on the interactions of surfactants with viruses, with a particular emphasis on how such interactions can be controlled and employed for inhibiting the infectivity of enveloped viruses, including coronaviruses. The aim is to provide to interested scientists from different fields, including chemistry, physics, biochemistry, and medicine, an overview of the basic properties of surfactants and (corona)viruses, which are relevant to understanding the interactions between the two. Various types of interactions between surfactant and virus are important, and they act on different components of a virus such as the lipid envelope, membrane (envelope) proteins and nucleocapsid proteins. Accordingly, this cannot be a detailed account of all relevant aspects but instead a summary that bridges between the different disciplines. We describe concepts and cover a selection of the relevant literature as an incentive for diving deeper into the relevant material. Our focus is on more recent developments around the COVID-19 pandemic caused by SARS-CoV-2, applications of surfactants against the virus, and on the potential future use of surfactants for pandemic relief. We also cover the most important aspects of the historical development of using surfactants in combatting virus infections. We conclude that surfactants are already playing very important roles in various directions of defence against viruses, either directly, as in disinfection, or as carrier components of drug delivery systems for prophylaxis or treatment. By designing tailor-made surfactants, and consequently, advanced formulations, one can expect more and more effective use of surfactants, either directly as antiviral compounds or as part of more complex formulations.     

α-glucosidase inhibitory,antioxidant activity,and GC/MS analysis of Descurainia sophia methanolic extract: In vitro,in vivo,and in silico studies

Due to the presence of various phenolic compounds in D.sophia, this plant may have an inhibitory effect on α-Glc and ultimately diabetes control. Therefore, this work aims to scrutinize total phenolic, flavonoid contents, antioxidant capacity, and α-Glc inhibitory activity in aerial parts of methanolic D.sophia extract. The methanolic flower extracts were selected from among aerial parts for the experimental study of anti-diabetic effects by α-Glc inhibitory assays. The flower extracts were also studied by GC/MS to detect the compounds. The total phenolic and flavonoid contents were 21.38 ± 0.93 GAE/g and 96.2 ± 0.20 QE/g, respectively. The IC₅₀ value of flower extract for α-Glc inhibition with mixed (Competitive/non-competitive) mode was found to be 20.34 ± 0.11 mg/ml. Furthermore, in-vivo studies showed that the blood glucose level reduced after consumption of flower extract compared to the control group. Twenty-one compounds were identified by GC/MS technique. These compounds were assessed for high docking scores against α-Glc in silico. Docking score calculations exhibited that the DES-α-Glc complex had a significantly higher binding energy (-6.13 Kcal/mol) than other compounds. The DES-α-Glc complex which displayed a higher docking energy value than the ACR was subjected to MDs studies. The findings of this study suggest that the flower extract of D.sophia can be used as a suitable additive in syrups or foods with anti-diabetic capacity.     

The glucocorticoid derivative with the phthalimide group cationic nanocrystal for ophthalmic application: a design space development approach

The glucocorticoid derivative of budesonide with a phthalimide group is a drug candidate to treat inflammatory eye diseases; nevertheless, it presents low water solubility. Drug nanocrystals have been proposed to overcome this hurdle. The development of an innovative ophthalmic anti-inflammatory nanosuspension was performed using a design space approach. We obtained the particle size reduction of this glucocorticoid derivative on a nanometer scale (approximately 165.0 nm), applying wet bead milling on a super reduced scale. The design of experiment supported the optimization of the formula evaluating the parameters that influence reducing the particle size and also allowed determining the design space. Considering the two statistical models developed and the size range obtained, we proposed that the optimized formulation for the glucocorticoid derivative nanosuspension may be 1.0 wt% glucocorticoid derivative and 0.092 wt% cetylpyridinium chloride. This formulation was characterized by the morphological, physical–chemical, and mucoadhesive in vitro test and showed potential for ophthalmic use with reduced frequency of product application, improved efficiency, and safety, which may promote better patient compliance.     

Incorporations of gold,silver and carbon nanomaterials to kombucha-derived bacterial cellulose: Development of antibacterial leather-like materials

Bacterial cellulose (BC), derived from kombucha scoby have extraordinary organoleptic properties suitable for development of leather-like materials. An improvement in physical and mechanical property is desirable for the practical applications. This work deals with the treatment of BC by incorporations of three different nanomaterials such as gold nanoparticles (AuNP), silver nanoparticles (AgNP) and graphene oxide (GO). Achieving combined benefits via synergic interactions of different nanomaterials is the major objective herein. While graphene oxide can influence some of the parameters related to mechanical properties, silver nanomaterials can offer antibacterial characteristics. Gold nano materials can bridge the BC/silver/graphene oxide as well as provide the desirable aesthetic colour. Different physical chemical and mechanical characteristics were studied in detail. For example, changes in morphology by imaging fiber network were studied using scanning electron microscopy. Fibre properties were studied by Small Angle X-Ray Scattering (SAXS) and X-Ray Diffraction (XRD). Elemental composition was studied by X-ray photoelectron spectroscopy (XPS) analysis and Raman analysis. The improvement of hydrophobicity was studied by Contact angle meter. Thermal analysis was performed using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). A Picture was provided in ESI to show the modified material's leather-like appearances.     

Electrochemical disinfection – State of the art and tendencies

Electrochemical disinfection has gained increasing interest in many sectors of social and industrial life. The reason is the growing need to disinfect the air, water, and special surfaces of different nature such as drinking water, wastewater, pool water, and other water qualities or surfaces. New research studies are reported and discussed. A stronger orientation on engineering aspects is intended. Following tendencies can be identified - research on complex liquid systems, implementation of risks consideration seen from by-product formation, and better cooperation between researchers and industry oriented to improve cell design and disinfection technology. Partially, reaction kinetics is studied and discussed at higher levels of likelihood. Furthermore, it can be found that more and more research papers deal with hybrid technologies to create novelty, to use synergistic effects and to meet the demands of real system treatment under practical conditions. A major focus can be identified for wastewater treatment/disinfection emphasizing electrocoagulation and electro-photocatalysis.     

Microfluidics and electrochemistry: an emerging tandem for next-generation analytical microsystems

Microfluidic and electrochemical technologies have been at the forefront of the development of emerging analytical microsystems. Microfluidics and electrochemistry show a synergistic relationship, empowering their inherent features. Thus, integration of microfluidics and electrochemical (bio)sensors is envisioned as a powerful tandem for boosting the next generation of lab-on-a-chip platforms, including point-of-care and point-of-need systems. In this review, a general overview of the advantages, drawbacks, and gaps as well as remaining challenges and future trends of coupling microfluidics and electrochemical cells is presented. Special attention is given to the manufacturing and scale-up of the integrated devices and all those aspects that can push on the development of true lab-on-a-chip platforms for reaching the industrial domain and actual commercialization.     

Combining plant and dairy proteins in food colloid design

The use of plant proteins to design colloidal food systems is a hot topic in the current context of the protein transition. However, replacing animal-derived proteins (in particular, dairy proteins) that have been traditionally used for this purpose by plant proteins is a challenge from various perspectives, and in particular, because of drastically different solubility and functionality. A possible route to mitigate these issues is to combine plant and dairy proteins, providing that their interactions can be understood from the molecular to the macroscopic scale. This review addresses the major advances that have occurred in the field of such blend-based systems, all the way from their behaviour in aqueous dispersions to their potential applications in gels, foams and emulsions.     

Paper-based diagnostic platforms and devices

Paper-based analytical devices have become lately “must have” components in equipment and instrumental designed for point-of-care applications, especially when they are used in tandem with microfluidic platforms. Nowadays, paper-based electrochemical devices (PEDs) represent the first choice in the development of lab-on-a-chip biosensors because of their benefits in biomedical diagnosis in terms of simplicity, affordability, portability, and disposability. Moreover, cellulose is a biodegradable and biocompatible substrate, ideal for building disposable devices for use in remote locations or low-resource settings. Despite their low costs and simplicity, PEDs must face a tough challenge—meeting the affordable, sensitive, specific, user-friendly, rapid and robust, equipment-free, and deliverable to end users criteria. The latest achievements in microfluidic PEDs for clinical diagnosis will be critically discussed, putting emphasis on innovative assay formats and methods for surface modification.     

Probing in vitro digestion at oil–water interfaces

Interfacial layers have been widely applied to study the formation and stability of emulsion-based systems. However, the application of isolated interfaces to address digestibility of emulsions is often limited because of the complexity of experimental methods and results. This review summarizes the latest developments in analytical methods and literature data on effects of digestion on interfacial layers. Particular emphasis is given to understand the changes on interfacial magnitudes during oral, gastric, and duodenal digestion, either applied separately or sequentially. Limitations of interfacial aspects and key factors that influence emulsion microstructure in bulk and lipid digestion are identified. Understanding the behavior of interfacial layers upon gastrointestinal digestion promotes an accurate tracking of the physiological fate of emulsions.     

Brazilian integrated sugarcane-soybean biorefinery: Trends and opportunities

1. Download : Download high-res image (162KB)
2. Download : Download full-size image

     

Conjugate polymer-based membranes for gas separation applications: current status and future prospects

Conjugate polymers provide the possibility of exploiting both the chemical and physical attributes of the polymers for membrane-based gas separation. The presence of delocalized π electrons provides high chain stiffness with low packing density, thus making the membrane a rigid structure that favors facilitated transport. Historically, the polymeric membranes were constrained by the tradeoff relationship between gas permeability and gas selectivity. So, different methods were investigated to prepare the membranes that can overcome the limitation. In recent years, electroconductive polymeric membranes have gained attention with their enhanced transportation properties combining the separation behavior depending on both molecular size discrimination as well as the facilitated transport. They offer better selectivity toward polar gases such as CO₂ because of the increased solubility. This review is aimed to provide a literature survey on gas separation using conjugate polymers such as polyaniline, polypyrrole, and some derivatives of polythiophenes. It contains various methods used by different researchers to enhance the gas separation properties of the membranes with improved mechanical and thermal stability such as changing the morphology and membrane preparation methods. In addition, it provides the pros and cons of various factors affecting the conjugate polymer membrane performance. The major challenges and future work that can be done in improving the transportation properties through the membrane to achieve viable membranes are also discussed so that they can be used for commercial and practical applications in the future.     

Developments on carbon dioxide reduction: Their promise,achievements, and challenges

CO₂ reduction processes continue to be developed for electrosynthesis, energy storage applications, and environmental remediation. A number of promising materials have shown high activity and selectivity to target reduction products. However, the progress has been mainly at a small laboratory scale, and the technical challenges of large scale CO₂ reduction have not been considered adequately. This review covers recent advancements in catalyst materials and cell designs. The leading materials for CO₂ reduction to a number of useful products are presented with their corresponding cell and reactor designs. The latest efforts to progress to industrially relevant scales are discussed, along with the challenges that must be met for carbon dioxide reduction to be a viable route for mass scale production.     

Synthetic electrically driven colloids: A platform for understanding collective behavior in soft matter

The collective motion of synthetic active colloids is an emerging area of research in soft matter physics and is important both as a platform for fundamental studies ranging from non-equilibrium statistical mechanics to the basic principles of self-organization, emergent phenomena, and assembly underlying life, as well as applications in biomedicine and metamaterials. The potentially transformative nature of the field over the next decade and beyond is a topic of critical research importance. Electrokinetic active colloids represent an extremely flexible platform for the investigation and modulation of collective behavior in active matter. Here, we review progress in the past five years in electrokinetic active systems and related topics in active matter with important fundamental research and applicative potential to be investigated using electrokinetic systems.     

Bio and soft-imprinting lithography on bacterial cellulose films

Bacterial cellulose (BC) is a biocompatible polysaccharide produced by bacteria currently used in packaging, cosmetics, or health care. A highly attractive feature of BC is the possibility of patterning the BC pellicle during its biosynthesis, a concept coined as bio-lithography. BC-patterned films have demonstrated improved properties for cellular-guided growth, implant protection, or wound dressing. However, aspects such as the diversity and size of the features patterned, how those features withstand postprocessing steps, or if large areas can be patterned remain unanswered. Gathering knowledge on these characteristics could extend the use of patterned cellulose-based materials in emerging fields such as transient devices, nanogenerators, or microfluidics. Here, we show that bio-lithographed BC films present good-quality micropatterned features for various motifs (wells, pillars, and channels) in a wide range of sizes (from 200 to 5 μm) and areas as large as 70 cm². Besides, we have studied the fidelity of the motifs and the fiber organization for wet, supercritical, and oven-dried films. When wells and pillars were patterned, the x and y dimensions were faithfully replicated in the wet and dried samples, but only wet and supercritically dried films afforded mold accuracy in the z-direction. In addition, x/z ratio should be carefully considered for obtaining self-standing pillars. Finally, we compared bio-lithography and soft-imprint lithography. In the latter case, fiber alignment was not observed and the depth of the resulting features dramatically decreased; however, this technique allowed us to produce submicron features that remain after the rewetting of the BC films.