SiO2和Al2O3负载的Ni基催化剂在甲烷干重整中的催化性能差异

CH₄与CO₂干重整反应对于环境保护和天然气资源的合理利用具有重要意义。SiO₂和Al₂O₃是适用于甲烷干重整反应的两种典型的催化剂载体。为了阐明这两种载体对催化剂性能的影响,本研究采用等体积浸渍法制备了Ni/Al₂O₃和Ni/SiO₂催化剂,并利用BET、TEM、H₂-TPR、XRD、TG和Raman等技术对还原和反应后的催化剂进行了表征。结果表明,由于载体的性质不同,Ni基催化剂在甲烷干重整中的催化性能也不同。Ni/SiO₂催化剂的初始活性较高,但由于其金属-载体相互作用较弱,催化稳定性较差,在800℃下反应15h其催化活性急剧下降;较弱的金属-载体相互作用使得Ni/SiO₂催化剂上的Ni颗粒较大,有利于积炭前驱物种的生成,导致催化剂快速失活。而对于Ni/Al₂O₃催化剂,金属-载体相互作用较强,Ni颗粒较小,但由于Ni与Al₂O₃生成了NiAl_xO_y物种,有效活性位减少,其催化活性相对较低,但催化稳定性较好,干重整反应进行50h其活性保持稳定;Ni与Al₂O₃之间较强的相互作用有利于形成小且稳定的Ni粒子,能减少积炭,因而具有优异的催化稳定性。     

Design of coke-free methane dry reforming catalysts by molecular tuning of nitrogen-rich combustion precursors

The valorization of methane and carbon dioxide is a promising solution for mitigating global warming. The dry reforming of methane (DRM) is capable of concomitant conversion of these greenhouse gases into starting materials for production of synthetic fuels, promoting a carbon neutral avenue for fuel production. The development of efficient, stable, and economic catalysts presents a challenge owing to the comparatively rapid deactivation of DRM catalysts under reaction conditions. Here, Ni/La₂O₃ DRM catalysts are prepared by combustion synthesis of Ni and La complexes of nitrogen-rich precursors. We expound the relationship between structures of the combustion precursors, the thermochemistry of their combustion, the structures of the resultant Ni/La₂O₃ catalysts, and their performance under DRM conditions. We show that the best catalyst is derived from energetic precursor which has the sharpest exotherm and rapidly releases the largest amounts of nitrogen gas. These properties give rise to the crystallization of the Ni/La₂O₃ catalyst with high Ni dispersion and strong metal-support interactions. This work can act as starting point to expand the link between the chemistry of combustion precursors and the resulting catalyst properties, eventually realizing the rational design of high-performance catalysts prepared by combustion synthesis through tailoring the chemistry and structure of the nitrogen-rich precursors.     

Property and structure of various platinum catalysts for low-temperature carbon monoxide oxidations

The oxidation of carbon monoxide (CO) has received more attention in the last two to three decades owing to its importance in different fields. To control this CO pollution, catalytic converters have been investigated. Different types of catalysts have been used in a catalytic converter for CO emission control purposes. Platinum (Pt)-based noble metal catalysts show great potential for CO oxidation in catalytic converters with high thermal stability and tailoring flexibility. Pt metal catalysts modified with promoters such as alkali metals and reducible metal oxides have received great attention for their superior catalytic activities in CO oxidation. Temperature, close environment of the catalyst, and chemical composition in the surface layer of the catalyst have a huge effect on the active phase dispersion and O₂ adsorption capacity of the Pt metal catalysts. The main difference in activities of Pt metal catalyst for CO oxidation in O₂ or H₂ atmosphere has found. The addition of supports in Pt metal catalysts has improved their performances and reduced their cost. These improvement strongly depends on the surface structure, morphology, number of active sites, and various Pt-O interactions. Many research articles have already been published in CO oxidation over Pt metal catalysts, but no review article dedicated to CO oxidation is available in the literature.     

Steam-reforming of ethanol for hydrogen production

Production of hydrogen by steam-reforming of ethanol has been performed using different catalytic systems. The present review focuses on various catalyst systems used for this purpose. The activity of catalysts depends on several factors such as the nature of the active metal catalyst and the catalyst support, the precursor used, the method adopted for catalyst preparation, and the presence of promoters as well as reaction conditions like the water-to-ethanol molar ratio, temperature, and space velocity. Among the active metals used to date for hydrogen production from ethanol, promoted-Ni is found to be a suitable choice in terms of the activity of the resulting catalyst. Cu is the most commonly used promoter with nickel-based catalysts to overcome the inactivity of nickel in the water-gas shift reaction. γ-Al₂O₃ support has been preferred by many researchers because of its ability to withstand reaction conditions. However, γ-Al₂O₃, being acidic, possesses the disadvantage of favouring ethanol dehydration to ethylene which is considered to be a source of carbon deposit found on the catalyst. To overcome this difficulty and to obtain the long-term catalyst stability, basic oxide supports such as CeO₂, MgO, La₂O₃, etc. are mixed with alumina which neutralises the acidic sites. Most of the catalysts which can provide higher ethanol conversion and hydrogen selectivity were prepared by a combination of impregnation method and sol-gel method. High temperature and high water-to-ethanol molar ratio are two important factors in increasing the ethanol conversion and hydrogen selectivity, whereas an increase in pressure can adversely affect hydrogen production.     

Perovskites as Precursors for Ni/La2O3 Catalysts in the Dry Reforming of Methane: Synthesis by Constant pH Co‐Precipitation,Reduction Mechanism and Effect of Ru‐Doping

LaNiO₃ perovskite is an interesting precursor for Ni/La₂O₃ catalysts for the dry reforming of methane at high temperatures. Precursors have been synthesized by co‐precipitation without, with 2.5 at %, and with 5 at % Ru doping. The presence of Ru leads to a stabilization of the perovskite structure and hinders the decomposition into NiO and Ruddlesden‐Popper mixed oxides La_n+1Ni_nO_3n+1, which was observed for the Ru‐free sample upon calcination at 1000 °C (n = 3). Upon reduction in hydrogen, a mechanism involving at least two steps was observed and the first major step was identified as the partial reduction of the precursor leading to a LaNiO_2.5‐like intermediate. The second major step is the reduction to Ni metal supported on La₂O₃ independent of the Ru content of the catalyst. In the presence of Ru, indications for Ni‐Ru alloy formation and for a higher dispersion of the metallic phase were found. The catalytic activity in DRM of the catalyst containing 2.5 % Ru was superior to the catalysts with more or without Ru. Furthermore, the propensity of coke formation was reduced by the presence of Ru.     

Carbon Dioxide Reforming of Methane over Ni Catalysts Supported on Al2O3 Modified with La2O3, MgO, and CaO

The preparation of synthesis gas from carbon dioxide reforming of methane (CDR) has attracted increasing attention. The present review mainly focuses on CDR to produce synthesis gas over Ni/MO_x/Al₂O₃ (X = La, Mg, Ca) catalysts. From the examination of various supported nickel catalysts, the promotional effects of La₂O₃, MgO, and CaO have been found. The addition of promoters to Al₂O₃-supported nickel catalysts enhances the catalytic activity as well as stability. The catalytic performance is strongly dependent on the loading amount of promoters. For example, the highest CH₄ and CO₂ conversion were obtained when the ratios of metal M to Al were in the range of 0.04–0.06. In the case of Ni/La₂O₃/Al₂O₃ catalyst, the highest CH₄ conversion (96%) and CO₂ conversion (97%) was achieved with the catalyst (La/Al = 0.05 (atom/atom)). For Ni/CaO/Al₂O₃ catalyst, the catalyst with Ca/Al = 0.04 (atom/atom) exhibited the highest CH₄ conversion (91%) and CO₂ conversion (92%) among the catalysts with various CaO content. Also, Ni/MgO/Al₂O₃ catalyst with Mg/Al = 0.06 (atom/atom) showed the highest CH₄ conversion (89%) and CO₂ conversion (90%) among the catalysts with various Mg/Al ratios. Thus it is most likely that the optimal ratios of M to Al for the highest activities of the catalysts are related to the highly dispersed metal species. In addition, the improved catalytic performance of Al₂O₃-supported nickel catalysts promoted with metal oxides is due to the strong interaction between Ni and metal oxide, the stabilization of metal oxide on Al₂O₃ and the basic property of metal oxide to prevent carbon formation.     

Selective hydrogenation of o-chloronitrobenzene (o-CNB) over supported Pt and Pd catalysts obtained by laser vaporization deposition of bulk metals

Carbon nanotubes (CNTs), γ-alumina (γ-Al₂O₃) and silica (SiO₂) supported Pt and Pd catalysts were produced by laser vaporization deposition of respective bulk metals. The catalysts were characterized by inductive coupled plasma emission spectrometer (ICP), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The catalytic properties of the catalysts were investigated in the liquid phase hydrogenation of o-chloronitrobenzene (o-CNB) to o-chloroaniline (o-CAN) under 333 K and 1.0 MPa hydrogen pressure. The results show that the catalytic properties are greatly affected by the supports. Pt/CNTs catalyst exhibits the best catalytic performance among the Pt-based catalysts, producing o-CAN with 99.6% selectivity at complete conversion. Pd/CNTs catalyst exhibits the best catalytic performance among the Pd-based catalysts, giving o-CAN with 95.2% selectivity at complete conversion. For Pt-based catalysts, geometric effect and the textures and properties of the supports play important roles on catalytic properties. On the other hand, geometric effect, electronic effect and the textures and properties of the supports simultaneously influence the catalytic properties of the Pd-based catalysts. In addition, hydrogenolysis of the C–Cl bond can be well inhibited over all catalysts prepared by laser vaporization deposition.     

Catalytic conversion of greenhouse gases (CO2 and CH4) to syngas over Ni-based catalyst: Effects of Ce-La promoters

Dry reforming of methane (DRM) is an emerging technology as it can simultaneously serve as a prospective alternative energy source and mitigate greenhouse gases (e.g. CH₄ and CO₂). However, the industrial applications of DRM remain restricted due to the poor prospect of catalyst deactivation. In this study, the effects of adding CeO₂ and La₂O₃ as promoters on the catalytic performance of Ni/Al₂O₃ catalyst were assessed. Catalysts such as Ni/Al₂O₃, Ni/Al₂O₃-La₂O₃, and Ni/Al₂O₃-CeO₂ were synthesized at nano level using the sol-gel method. Citric acid was added to improve the reactivity of catalysts before the application of DRM. Various characterisation techniques were used to characterise synthesized catalysts, including Brunauer-Emmett-Teller (BET) analysis, temperature-programmed reduction (TPR), field emission scanning microscopy (FESEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM). The results revealed that the BET surface area of the synthesized catalyst slightly decreased when CeO₂ and La₂O₃ were added due to the deposition on the porous structure of the support. Meanwhile, the XRD results demonstrated the increase in reducibility and dispersion of Ni using CeO₂ promoter and the inhibited development of the non-active phase of Ni/Al₂O₃ using La₂O₃ promoter (i.e. NiAl₂O₄), resulting in the carbon formation and reduced efficiency of the catalyst. The catalytic performance in DRM at 800 °C showed that Ni/Al₂O₃-CeO₂ catalyst exhibited higher catalytic performance in terms of CH₄ and CO₂ conversion with 89.6% and 91.2% respectively. While Ni/Al₂O₃-La₂O₃ was found to play a substantial role in the stability of the chemical reaction during the 8 h reaction time-on-stream.     

稀土掺杂改性对Cu/ZnAl水滑石衍生催化剂甲醇水蒸气重整制氢性能的影响

采用原位合成法在γ-Al₂O₃表面合成了锌铝水滑石,再通过顺次浸渍法制备了一系列掺杂稀土改性的M（M=Y、La、Ce、Sm、Gd）/Cu/ZnAl催化材料,并将其应用于甲醇水蒸气重整制氢反应。探讨了稀土掺杂改性对Cu/ZnAl催化剂催化性能的影响,并采用XRD、SEM-EDS、BET、H₂-TPR、XPS和N₂O滴定等手段对催化剂进行了表征。结果表明,催化剂的活性与Cu比表面积和催化剂的还原性质密切相关,Cu比表面积越大,还原温度越低,催化活性越高。稀土Ce、Sm、Gd的引入能改善活性组分Cu的分散度、Cu比表面积以及催化剂的还原性质,进而提高催化剂的催化活性。其中,Ce/Cu/ZnAl催化剂表现出最佳的催化活性,在反应温度为250 ℃时,甲醇转化率达到100%,CO含量为0.39%,相比Cu/ZnAl催化剂,甲醇转化率提高了近40%。     

Effect of Ni loadings on the activity and coke formation of MgO-modified Ni/Al2O3 nanocatalyst in dry reforming of methane

MgO-modified Ni/Al₂O₃ catalysts with different Ni loadings were prepared and employed in dry reforming of methane (DRM). The effect of Ni loadings on the activity and coke formation of Ni/MgO-Al₂O₃ catalysts were investigated. The synthesized catalysts were characterized by XRD, N₂ adsorption-desorption, SEM, TPO and TPR techniques. The obtained results showed that increasing nickel loading decreased the BET surface area and increased the catalytic activity and amount of deposited carbon. In addition, the effect of gas hourly space velocity (GHSV) and feed ratio were studied.     

镍基催化剂上稻草水蒸气重整制富氢合成气

采用浸渍法制备了SiO₂, γ-Al₂O₃, CaO和TiO₂负载的Ni催化剂, 以及不同MgO含量的MgO-7.5%Ni/γ-Al₂O₃催化剂,利用X射线衍射和N₂吸附-脱附技术表征了催化剂的结构,在固定床反应器上评价了它们在稻草水蒸气催化重整制合成气反应中的催化性能,考察了反应条件对催化剂性能的影响.结果表明, 以γ-Al₂O₃为载体时Ni催化剂活性最高,其中7.5%Ni/γ-Al₂O₃催化剂的H₂收率可达1071.3ml/g,H₂:CO的体积比为1.4:1;同时,MgO的添加进一步提高了该催化剂的性能,当MgO含量为1.0%时,H₂收率可达1194.6ml/g,H₂:CO体积比可达3.9:1.可见MgO的加入促进了Ni基催化剂上稻草水蒸气催化重整制合成气反应的进行,同时使得合成气中CO发生水-汽转换反应,从而大大提高了合成气中H₂含量.     

Recent Advances in Preferential Oxidation of CO in H2 Over Gold Catalysts

Recent studies have revealed that supported gold catalysts exhibit comparable or superior catalytic performance relative to platinum group metals, especially at low temperatures, in the preferential oxidation of CO under excess H₂ (CO-PROX). Complete conversion of CO with good selectivity of O₂ for CO₂ and highly stable catalyst performance in the presence of CO₂ and H₂O are considered to be essential for the successful development of CO-PROX catalysts for application in polymer electrolyte membrane fuel cells. The performance of supported gold catalysts in the CO-PROX reaction has been shown to be dependent on the characteristics of gold (size, oxidation state, and its interaction with other metal/oxides), nature of the support (size, composition, preparation method, presence of promoters, and doping with other metal ions), and reaction conditions (temperature and feed composition). Complete CO conversion has been achieved in the presence of certain gold catalysts below 100 °C. The unresolved issues in CO-PROX include the undesired oxidation of H₂, detrimental effects of CO₂ and/or H₂O, and long-term stability of the catalysts. To address these issues, the catalytic activity of gold supported on simple oxides such as TiO₂, CeO₂, Al₂O₃, and Fe₂O₃ has been improved dramatically by the addition of promoters, alteration of the gold-oxide support interface, and modification of the oxide supports. Recently, nanoporous gold has also been recognized to be promising for this reaction. This review highlights recent developments of unsupported and supported gold catalysts for the CO-PROX reaction.     

氧化铝载体对Pt-Sn/Al2O3催化剂上苯胺和苯甲醇一步合成N-苯基苄胺催化反应性能的影响

以基于借氢策略的苯甲醇和苯胺一步合成N-苯基苄胺为模型反应,研究了三种不同表面结构的氧化铝对其负载的Pt-Sn催化剂上N-烷基化合成仲胺反应性能的影响.采用N₂吸附-脱附法、压汞法、X射线衍射、透射电镜、扫描电镜、CO脉冲吸附、H₂-程序升温还原及NH₃-程序升温脱附等技术对载体和Pt-Sn/Al₂O₃催化剂进行了表征.结果表明,与Al₂O₃相互作用较弱且高度分散的Pt颗粒具有很高的催化活性,Al₂O₃载体较大的孔体积和大孔分布的孔结构有助于反应物扩散和吸附到催化剂表面并提高反应活性.同时也有利于反应产物从催化剂表面离开,从而提高催化剂的稳定性.然而Al₂O₃较强的酸性及酸性分布降低了产物仲胺的选择性和催化剂稳定性.     

Dry reforming of methane over Ni/Ce0.62Zr0.38O2 catalysts: Effect of Ni loading on the catalytic activity and on H2/CO production

The activity of ceria–zirconia-supported nickel catalysts (Ni/CZ) with various loadings of nickel (2, 4 and 10 wt. %) was studied in the case of low-temperature dry reforming of methane (DRM). XRD, S_BET, SEM, TPD-CO₂ and thermogravimetry were used to determine the physicochemical properties of the catalysts and of the carbon deposits formed on the surface. It was found that the agglomerates of the Ni-active phase are formed on the surface of the support for high loadings of nickel. The best conversions of CO₂ and CH₄ and an optimum ratio H₂/CO = 1 were obtained for the catalysts with the highest Ni content. It was also found that loading has an influence on the amount of carbon deposits formed in the DRM process.     

在Ni/HZSM-5催化剂上低温水蒸汽重整生物油制氢

We investigated high catalytic activity of Ni/HZSM-5 catalysts synthesized by the impregna-tion method, which was successfully applied for low-temperature steam reforming of bio-oil. The influences of the catalyst composition, reforming temperature and the molar ratio of steam to carbon fed on the stream reforming process of bio-oil over the Ni/HZSM-5 catalysts were investigated in the reforming reactor. The promoting effects of current passing through the catalyst on the bio-oil reforming were also studied using the electrochemical catalytic re-forming approach. By comparing Ni/HZSM-5 with commonly used Ni/Al₂O₃ catalysts, the Ni₂₀/ZSM catalyst with Ni-loading content of about 20% on the HZSM-5 support showed the highest catalytic activity. Even at 450 oC, the hydrogen yield of about 90% with a near complete conversion of bio-oil was obtained using the Ni₂₀/ZSM catalyst. It was found that the performance of the bio-oil reforming was remarkably enhanced by the HZSM-5 supporter and the current through the catalyst. The features of the Ni/HZSM-5 catalysts were also investigated via X-ray diffraction, inductively coupled plasma and atomic emission spectroscopy, hydrogen temperature-programmed reduction, and Brunauer-Emmett-Teller methods.     

Effects of CeO2 and CaO composite promoters on the properties of eggshell Ni/MgO-Al2O3 catalysts for partial oxidation of methane to syngas

The effects of CeO₂ and CaO composite promoters on the properties of eggshell Ni/MgO-Al₂O₃ catalysts of 1.5 mm diameter for the partial oxidation of methane to syngas were investigated. The addition of 1wt.% promoters could enhance the catalytic performance of the Ni/MgO-Al₂O₃ catalyst, while further increasing the promoter content to 4wt.% results in the decrease of reactivity. The catalytic property is related to the oxidizability of surface nickel species.     

金属改性SBA-15应用于乙醇水蒸气重整制氢的研究

采用水热法将Ce金属引入SBA-15骨架,合成一系列Ce-SBA-15（Si/Ce=40,20,10）载体,再通过浸渍法制得Co/Ce-SBA-15催化剂.利用XRD、UV-Vis、FT-IR、H₂-TPR、N₂吸附-脱附等手段对催化剂进行表征,并用于乙醇水蒸汽重整制氢反应（ESR）,考察载体骨架中Ce金属对催化剂结构和性能的影响.结果表明,水热法制备可使得Ce离子进入到SBA-15分子筛骨架,合成的载体仍保持SBA-15特有的介孔结构.与Co/SBA-15催化剂相比,基于铈的储放氧功能,Ce的加入提高了活性金属分散度,降低了反应积碳的生成,改善了催化剂稳定性.适量铈与钴的协同作用,提高了钴物种的分散度,降低了钴的烧结程度,催化剂Co/Ce-SBA-15（Si/Ce=20）具有良好的催化活性,乙醇转化率为96.6%,H₂选择性达到75.5%,反应后积碳率仅为5.6%.     

负载Ni催化剂用于乙二醇蒸汽重整制氢催化性能研究

采用等体积浸渍法和共沉淀法制备了Ni催化剂,在固定床反应器上考察了Ni负载量、焙烧温度、反应温度等因素对乙二醇低温重整制氢反应活性和选择性的影响。应用X射线衍射、氮物理吸附、H₂程序升温还原等技术对负载型Ni催化剂进行了表征。结果表明,共沉淀法制备的Ni/CeO₂催化剂具有较小的NiO颗粒与CeO₂载体颗粒粒径,催化活性较高。添加少量氧化钴到Ni/CeO₂催化剂中可使H₂收率达72.6%,EG转化率达93.1%。在CeO₂中添加Al₂O₃能提高负载Ni催化剂的活性,乙二醇转化率达94.0%,H₂收率达67.0%;但添加SiO₂则使其活性明显变差。     

Improving Catalytic Stability and Coke Resistance of Ni/Al2O3 Catalysts with Ce Promoter for Relatively Low Temperature Dry Reforming of Methane Reaction

Aseries of Ni catalysts supported on alumina with different Ce contents(1.0%-6.0%, mass fraction) was prepared by the impregnation method and used for dry reforming of methane(DRM) at a relatively low temperature of 650 ^oC. The promotion effect of Ce with different loading amounts on the physicochemical properties of the catalysts was systematically characterized by transmission electron microscopy(TEM), X-ray diffraction(XRD), N₂ adsorption-desorption, thermo elemental IRIS Intrepid inductively coupled plasma atomic emission spectrometer (ICP-AES), UV-visible diffuse reflectance spectroscopy(UV-Vis DRS), Fourier transformation infrared(FTIR) spectra, H₂-temperature programmed reduction(H₂-TPR) analysis, H₂-temperature programmed desorption(H₂-TPD), and the X-ray photoelectron spectroscopy(XPS) techniques. The results indicate that all the catalysts mainly exist in the NiAl₂O₄ phase after being calcined at 750 ^oC with small Ni particle sizes due to the strong metal-support interaction derived from the reduction of the NiAl₂O₄ phase. The Ce-promoted catalysts show better catalytic performance as well as the resistance against sintering of Ni particles and deposition of carbon compared to the Ni/Al₂O₃ catalyst. The Ni-6Ce/Al₂O₃ exhibits the best catalytic stability and coke resistance among the four catalysts studied, which is due to its small Ni nanoparticles sizes, excellent reducibility as well as high amount of active oxygen species. In a 400 h stability test for DRM reaction at 650 ^oC, Ni-6Ce/Al₂O₃ exhibits less coke deposition and small growth of Ni nanoparticles. This work provides a simple way to preparing the Ni-Ce/Al₂O₃ catalyst with enhanced catalytic performance in DRM. The Ni-6Ce/Al₂O₃ catalyst has great potential for industrial application due to its anti-sintering ability and resistance to carbon deposition.     

Catalytic Performance and Kinetic Models on Zirconium Phosphate Modified Ru/Co/SiO2 Fischer–Tropsch Catalyst

The present paper represents the promising ways to improve catalytic performance by introducing zirconium phosphate (ZP) on Ru/Co/SiO₂ catalysts and the related kinetic models using the optimized Fischer?CTropsch synthesis (FTS) catalyst. A lot of works has been reported using cobalt-based catalyst for FTS reaction, and many authors have continuously tried to find out highly efficient FTS catalyst by modifying support as well as by introducing promoters. Silica is one of the excellent candidates as catalytic supports, and the present works intensively represents how to modify SiO₂ support for a high catalytic performance by using ZP species. The effect of ZP-modification of SiO₂ support with respect to cobalt aggregation and catalytic deactivation was mainly investigated for FTS reaction. The surface modification at P/(Zr?+?P) molar ratio between 0.029 and 0.134, enhanced the spatial confinement effect of cobalt clusters, and resulted in high catalytic stability with the help of well-dispersed ZP particle formation. The enhanced catalytic performance, in terms of CO conversion, C₅+ selectivity and catalytic stability, is mainly attributed to the suppressed aggregation, a homogeneous distribution of cobalt clusters with a proper size and a low mobility of cobalt clusters at an optimum molar ratio of P/(Zr?+?P) because of the formation of thermally stable ZP particles. The kinetic parameters and rate equations on the optimized catalyst are also derived in terms of CO conversion and product distribution.