多级孔结构WO3/ZrO2固体酸催化剂的烷基化催化性能研究

采用复合模板表面活性剂辅助水热法一步合成WO3/ZrO2体系多级孔固体酸催化剂,探讨了煅烧温度对所合成催化剂试样酸强度及酸量的影响,并考察了催化剂针对苯和十二烯的烷基化反应中的催化性能.结果表明,WO3/ZrO2体系催化剂具有较强的酸强度,并且与催化剂的比表面积和晶化程度有密切关系,比表面积的增大和四方相ZrO2的生成能有效地提高催化剂的酸强度.该催化剂具有优良的烷基化反应催化活性和选择性,其中450℃,5h煅烧的WO3/ZrO2催化剂样品酸性最强,其烷基化催化活性和选择性最优.     

多级孔WO3/ZrO2固体酸催化剂的制备与表征

采用复合模板表面活性剂辅助水热法一步合成了WO3/ZrO2多级孔固体酸催化剂,并应用X射线衍射、低温N2吸附-脱附、拉曼光谱及NH3程序升温脱附对催化剂进行了表征.结果表明,WO3的引入使得WO3/ZrO2催化剂的比表面积增大,表面的酸中心明显增加.在乙酸和正丁醇的酯化反应中,WO3/ZrO2多级孔固体酸催化剂表现出较...     

SO42-/ZrO2-TiO2催化苯与1-十二烯烷基化合成十二烷基苯

利用沉淀-浸渍法制备了SO42-/ZrO2-TiO2固体酸催化剂,优化了SO42-/ZrO2-TiO2催化苯与1-十二烯烷基化合成十二烷基苯的工艺条件,并通过IR及GC/MS对产物的结构进行了表征.结果表明: SO42-/ZrO2-TiO2对苯与1-十二烯的烷基化反应具有良好的催化性能,其催化中心主要为B酸中心.0.12g催化剂/ mL1-十二烯、n(苯)/n(烯)=6:1、反应时间3 h等优化条件下1-十二烯转化率100%,LAB与2-LAB选择性分别达到90.3%和88.6%.使用后的催化剂可以通过H2SO4浸渍500 ℃焙烧再生.GC/MS分析表明产物主要包括2～6-LAB及少量二烷基苯.     

硫酸化剂和制备方法对锆基固体酸催化剂的结构和性能的影响

采用沉淀法制备ZrO2氧化物,用氯磺酸和硫酸对其进行改性制备了Zr基固体酸催化剂,以XRD、BET和NH3-FTIR等手段考察了制备条件对催化剂晶相结构和表面性质的影响,研究了催化剂结构与其对棕榈油酯化反应的催化活性之间的关系.NH3-FTIR表明催化剂表面有B酸和L酸中心的生成.硫酸化剂的种类及其引入顺序都将影响催化剂的晶相结构和孔结构.酸的引入将阻止ZrO2·nH2O在焙烧时直接向单斜相ZrO2转变,氯磺酸将使ZrO2·nH2O转变为四方相ZrO2,而硫酸将导致四方相ZrO2和Zr(SO4)2·5H2O的生成.以氯磺酸改性的四方相和单斜相ZrO2基催化剂均具有很高的催化酯化活性,比硫酸改性的S-Z固体酸催化活性高.CS-ZrO2固体酸催化活性最高,在醇油比6:1、催化剂用量7 wt%、温度338 K和常压下反应2 h,棕榈油的酯化率可达98.9%.     

固体强酸催化剂Pd/WO3-ZrO2的制备及其对正庚烷异构化反应的催化性能

 采用共沉淀方法制备了固体酸载体WO3-ZrO2,考察了W含量和焙烧温度等对WO3-ZrO2酸性和物相结构的影响,并且考察了Pd/WO3-ZrO2催化剂对正庚烷异构化反应的催化性能. 结果表明,Pd/WO3-ZrO2催化剂的催化性能与固体强酸的W含量及晶相结构密切相关. 在w(W)=13.2%～15.8%时,经700～800 ℃焙烧,WO3在ZrO2表面达到单层分散,且大部分ZrO2以四方晶相存在,所制备的0.5%Pd/WO3-ZrO2对正庚烷异构化反应的催化活性可达到70.4%,选择性可达到81.0%.     

WO3/ZrO2固体强酸催化剂上异丁烷-丁烯烷基化反应的研究Ⅲ. 超细ZrO2载体对催化剂性能的影响

制备了以超细ZrO2为载体的WO3/ZrO2、 SO4 2-/ ZrO2、 MoO3/ZrO2固体强酸催化剂 ,并用XRD、 DTA-TG 、 H2-TPR、 NH3-TPD等方法表征了其晶型结构、表面状态和酸性. 结果表明,超细ZrO2及其催化剂均主要以T-晶相存在,与通常以Zr(OH)4为载体制备的同类催化剂相比,ZrO2中的T-晶相所占比例虽有所下降,但具有更大的比表面积、酸强度和对金属氧化物的负载能力,且酸强度随焙烧温度升高而增强,表明其表面状态亦有较大变化. 研究了以超细ZrO2为载体的固体强酸催化剂上, 异丁烷-丁烯的烷基化反应,与通常以Zr(OH)4为载体制得的催化剂相比,其具有更好的烯烃转化率,在烷基化产物中, C5～C7裂解产物较多,使C80的选择性有所下降.     

稀土氧化物的掺杂量对SO42-/ZrO2/Al2O3催化剂催化性能的影响

采用浸渍-沉淀法制备负载型纳米ZrO2/Al2O3,复合载体,并将不同量的氧化钕、氧化镨掺杂到负载型纳米ZrO2/Al2O3复合载体中以调变ZrO2的表面性能.同时以此复合载体负载SO42-制备SO42-/REXOY-ZrO2/Al2O3催化剂.运用XHD、BET、NH3-TPD、原位红外技术对催化剂的晶相结构、比表面积、孔径分布、酸中心种类等进行表征,并以α-蒎烯异构化为探针反应考察了催化剂的活性.结果表明,适量的稀土掺杂会增加催化剂的比表面积,降低ZrO2的粒径,从而增加催化剂表面SO42-的配位吸附量,提高表面酸中心数和酸强度,增强催化剂的活性.     

WO3增强RuO2/ZrO2表面酸性及其NH3选择性催化氧化性能研究

以氨的选择性催化氧化为主要研究对象,设计制备了RuO2/ZrO2催化剂和一系列不同含量WO3改性的RuO2/ZrO2催化剂.其中,RuO2/ZrO2催化剂显示出优异的催化活性和较差的N2选择性.引入5％或10％的WO3之后RuO2/ZrO2催化剂的活性不变,但是高温N2选择性显著提高,NH3在225℃实现完全转化.然而...     

Pt/Al2O3/WO3/ZrO2催化剂对正己烷异构化反应的催化性能

 通过浸渍法制备了系列Pt/Al2O3/WO3/ZrO2催化剂样品,采用X射线衍射、傅里叶变换红外光谱和程序升温还原等方法表征了催化剂的结构、表面酸性和氧化还原性能,考察了不同反应条件下催化剂对正己烷异构化反应的催化性能. 结果表明, Pt的加入显著改变了WO3/ZrO2载体的氧化还原性,并使催化剂由单一的酸中心催化变成由酸中心与金属中心共同催化; Al2O3的加入增强了WO3与ZrO2之间的相互作用,增加了催化剂的Lewis酸位. 在n(H2)/n(n-C6H14)=1.5, WHSV=0.7 h-1, m(cat)=2.0 g, p=1.0 MPa, θ=220 ℃和t=3 h的反应条件下, Pt/Al2O3/WO3/ZrO2催化剂上正己烷的转化率和2,2-二甲基丁烷的选择性分别达到84.9%和22.9%,裂解反应产物的收率低于1.5%. 经 1000 h的寿命试验,催化剂没有出现失活.     

镓掺杂SO4^2—／ZrO2的制备及其对正丁烷异构化反应的催化性能

通过沉淀、回流和浸渍法制备了镓掺杂的纳米级固体超强酸SO4^2-／Ga2O3／ZrO2，并用X射线衍射、透射电镜、热重、吡啶吸附红外光谱、低温N2-BET及化学分析等技术对SO4^2-／Ga2O3／ZrO2的结构、表面性质及其对正丁烷异构化反应的催化活性进行了研究．结果表明，掺杂Ga2O3可以抑制制备过程中ZrO2晶粒长大，有利于抑制高温下催化剂由四方相转变为单斜相．与未掺杂的催化剂相比，Ga2O3的掺杂提高了催化剂表面SO4^2-的分解温度，有利于催化剂表面形成更多的酸中心．SO4^2-／Ga2O3／ZrO2对正丁烷异构化反应显示出优异的催化性能．其中，含3％Ga2O3的样品的活性最高，220℃下其初活性为59．1％；反应1h后，其活性基本保持稳定，稳态转化率大于51％，接近该反应条件下正丁烷的平衡转化率．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.