Comparison study of adsorption of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions from dimethyl formamide on In-Ga and Tl-Ga electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions on the renewable liquid In-Ga and Tl-Ga electrodes from 0.1 M solutions in dimethyl formamide (DMF) is investigated by using the method of differential capacitance measurements. The results are compared with similar data obtained on Hg and Ga electrodes in DMF and with the corresponding data obtained in acetonitrile (AN). It is shown that, in DMF, the adsorption parameters and the series of surface activity of halide ions (Hal⁻) significantly depend on the metal nature. In contrast to Hg electrode, on which the surface activity of halide ions increases in the series: Cl⁻ < Br⁻ < I⁻, on In-Ga, as well as on the Ga electrode, it varies in the reverse order: I⁻ < Br⁻ < Cl⁻, whereas on the Tl-Ga electrode, partially reversed series of surface activity is observed: Br⁻ < I⁻ < Cl⁻. The results are explained within the framework of Andersen-Bockris model. An analysis of experimental results leads to the following qualitative conclusions: (1) on the In-Ga and Tl-Ga electrodes, as well as on Ga electrode, free energy of metal-Hal⁻ interaction ( $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) increases in series I⁻ < Br⁻ < Cl⁻; (2) for Cl⁻, Br⁻, and I⁻, $ \Delta G_{_{M - Hal^ - } } $ \Delta G_{_{M - Hal^ - } } ) grows in series Tl-Ga < In-Ga < Ga; (3) an absolute magnitude of $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } $ \Delta G_{_{M - Hal_1^ - } } - \Delta G_{_{M - Hal_2^ - } } (Hal₁⁻, and Hal₂⁻ are any ions of Cl⁻, Br⁻, and I⁻) increases in series Hg < Tl-Ga < In-Ga < Ga; (4) the metal-DMF chemisorption interaction is much stronger than the metal-AN interaction and increases in series Tl-Ga < In-Ga < Ga.     

Thermal behaviour of nickel(II) sulphate,nitrate and halide complexes containing ammine and ethylenediamine as ligands

Thermal behaviour of nickel amine complexes containing SO₄ ²⁻, NO₃ ⁻, Cl⁻ and Br⁻ as counter ions and ammonia and ethylenediamine as ligands have been investigated using simultaneous TG/DTA coupled with mass spectroscopy (TG/DTA–MS). Evolved gas analyses detected various transient intermediates during thermal decomposition. The nickel ammonium sulphate complex produces NH, N, S, O and N₂ species. The nickel ammonium nitrate complex generated fragments like N, N₂, NO, O₂, N₂O, NH₂ and NH. The halide complexes produce NH₂, NH, N₂ and H₂ species during decomposition. The ligand ethylenediamine is fragmented as N₂/C₂H₄, NH₃ and H₂. The residue hexaamminenickel(II) sulphate produces NiO with crystallite size 50 nm. Hexaammine and tris(ethylenediamine)nickel(II) nitrate produce NiO in the range 25.5 nm and 23 nm, respectively. The halide complexes produce nano sized metallic nickel (20 nm) as the residue. Among the complexes studied, the nitrate containing complexes undergo simultaneous oxidation and reduction.     

Spin crossover in iron(II) complexes with tris(pyrazol-1-yl)methane

Mononuclear iron(II) coordination compounds with tris(pyrazol-1-yl)methane (HC(Pz)₃) described as [Fe{HC(Pz)₃}₂]A₂ × nH₂O, where A = Cl⁻, Br⁻, I⁻, 1/2 SO₄²⁻, n = 0–7, were synthesized. The compounds were studied by static magnetic susceptibility measurements, IR and UV/Vis spectroscopy, and powder X-ray diffraction. The crystal and molecular structures of all compounds were determined by single crystal X-ray diffraction.     

Cd(II) extraction in PEG-based two-phase aqueous systems in the presence of iodide ions. Analysis of PEG-rich solid phases

Cd(II) plus iodide species were extracted into PEG-rich phases in the aqueous PEG(1550)-(NH₄)₂SO₄ system at pH 2.05–7.12. IR spectra show that increasing (NH₄)₂SO₄ solution acidity does not protonate PEG ether oxygen atoms, but decreases water content in the PEG-rich phases. Metallic species’ extraction into the PEG predominantly alters how water molecules bind to polymer chains; the changes in their absorption bands depend on pH. Microscopy shows that “fixation” of the extracted metal in the PEG-rich phase occurs by specific interactions which depend on the species. These also determine changes in the polymer chains’ conformation.     

The Effect of Temperature on the Equivalent Conductivities and Ion-Association Constants of Some Tris-(ethylenediamine)chromium(III) Complexes in N,N-dimethylformamide and N,N-dimethylacetamide

The equivalent conductivities of tris-(ethylenediamine)chromium complexes, [Cr(en)₃]X₃ (where X⁻= Cl⁻, Br⁻, I⁻; en = ethylenediamine) were measured as functions of temperature (278.15 to 328.15 K) and concentration [(1.948 ×10⁻⁴ to 10.728 ×10⁻⁴ mol⋅dm⁻³) and (2.282 ×10⁻⁴ to 11.246 ×10⁻⁴ mol⋅dm⁻³)] in N,N-dimethylformamide (DMF) and N,N-dimethylacetamide (DMAC), respectively. Equivalent conductivity values for [Cr(en)₃]X₃ in DMF were found to be higher than those in DMAC. The conductivity data were analyzed with the Robinson-Stokes equations. For [Cr(en)₃]X₃, the limiting equivalent ionic conductivities of [Cr(en)₃]³⁺ and the ion-association constants (K _A) of the ion-pair between [Cr(en)₃]³⁺ and the monovalent halide anions were determined in DMF and DMAC. The values of K _A for three complex salts in DMF were higher than those in DMAC. This can be ascribed to an increase of the ion-association constants with a decrease of the relative permittivity of the solvents. The values of K _A at 298.15 K decreased in the order Cl⁻> Br⁻> I⁻ in DMF and Cl⁻> I⁻> Br⁻ in DMAC. The K _A values for [Cr(en)₃]Cl₃ increased with increasing temperature in both DMF and DMAC. For [Cr(en)₃]X₃(X⁻= Br⁻, I⁻) in both solvents, this indicates increasing disorder occurs with increasing temperature. Thermodynamic parameters (standard Gibbs energy, enthalpy and entropy changes) were determined from the temperature dependence of K _A in DMF and DMAC. These parameters were inter-compared in their dependences on temperature and solvent.     

Some applications of positron annihilation lifetime spectroscopy to complex formation and ion association studies

The rate constants for the reactions of positronium with halogen molecules and with halide ions in methanol (I₂, Br₂, Cl⁻, Br⁻) and in dimethylsulphoxide (I₂, Cl⁻) have been measured. The variations of the ortho-positronium lifetime in mixtures of these solutes have been used for quantitative determination of the formation constants of the corresponding polyhalides. These were found to be 2.9 and 5.4 M⁻¹, respectively, for I₂Cl⁻ and I₂Br⁻ in methanol and 2.0 M⁻¹ for I₂Cl⁻ in dimethylsulphoxide. Experiments on acidified AgClO₄ solutions confirmed the formation, at molar concentrations, of the Ag₂ ClO ₄ ⁺ species, very probably a triplet ion association.     

Synergistic and antagonistic effects between halide ions and carboxymethyl cellulose for the corrosion inhibition of mild steel in sulphuric acid solution

The corrosion and corrosion inhibition effect of carboxymethyl cellulose (CMC) for mild steel in sulphuric acid medium was investigated using chemical (weight loss and hydrogen evolution) techniques at 30–60 °C. The effect of addition of halide ions (Cl⁻, Br⁻, and I⁻) was also studied. It was found that CMC functions as an inhibitor for acid induced corrosion for mild steel. Inhibition efficiency increases with increase in immersion time but decreases with increase in temperature. Addition of halide ions reveals that chloride ions (Cl⁻) antagonize the inhibition process whereas iodide ions (I⁻) exert synergistic effect on the corrosion inhibition by CMC. Corrosion inhibitive effect was afforded by adsorption of CMC molecules onto the mild steel surface both in the absence and presence of halide ions which was found to follow Langmuir adsorption isotherm model. The phenomenon of physical adsorption is proposed from decrease in inhibition efficiency with increase in temperature. The inhibition mechanism was further corroborated by the values of thermodynamic and kinetic parameters obtained from the experimental data.     

Identification of Anionic Supramolecular Complexes of Sulfonamide Receptors with Cl<Superscript>−</Superscript>, NO<Stack><Subscript>3</Subscript><Superscript>−</Superscript></Stack>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> by APCI-MS

As part of a mass spectrometric investigation of the binding properties of sulfonamide anion receptors, an atmospheric pressure chemical ionization mass spectrometric (APCI-MS) method involving direct infusion followed by thermal desorption was employed for identification of anionic supramolecular complexes in dichloromethane (CH₂Cl₂). Specifically, the dansylamide derivative of tris(2-aminoethyl)amine (tren) (1), the chiral 1,3-benzenesulfonamide derivatives of (1R,2S)-(+)-cis-1-amino-2-indanol (2), and (R)-(+)-bornylamine, (3), were shown to bind halide and nitrate ions in the presence of (n−Bu)₄N⁺X⁻ (X⁻ = Cl⁻, NO₃⁻, Br⁻, I⁻). Solutions of receptors and anions in CH₂Cl₂ were combined to form the anionic supramolecular complexes, which were subsequently introduced into the mass spectrometer via direct infusion followed by thermal desorption. The anionic supramolecular complexes [M+X]⁻, (M=1–3, X⁻=Cl⁻, NO₃⁻, Br⁻, I⁻) were observed in negative mode APCI-MS along with the deprotonated receptors [M−H]⁻. Full ionization energy of the APCI corona pin (4.5 kV) was necessary for obtaining mass spectra with the best signal-to-noise ratios.     

Phenanthroline complexes bearing diamide-anion recognition sites

The synthesis and anion binding properties of new ruthenium(II) and cobalt(II) phenanthroline complexes, containing two amide subunits are described. Evidence for anion binding in dimethyl sulfoxide (DMSO) solution was obtained from u.v.–vis titration experiments. Results indicated that these receptors showed strong affinity for F⁻ and AcO⁻, and showed weak affinity for OH⁻ and H₂PO ₄ ⁻ , and showed no affinity for Cl⁻, Br⁻, I⁻. These receptors interacted with various anions examined through hydrogen-bond formation.     

Nucleophilic Substitution Reactions at Planar Tetra-coordinate Bis-cationic-platinum(II) Complexes. Kinetics of Displacement of Pyridine from {Pt[2,6-bis(methylthiomethyl)pyridine](py)}2+, {Pt[bis(2-pyridylmethyl)amine] (py)}2+ and {Pt[bis(2-(pyridylmethyl)sulphide](py)}2+ Cations

The kinetics of nucleophilic substitution of pyridine in bis-cationic [Pt(L)(py)]²⁺ complexes (L=SNS, NNN, NSN) [SNS=bis(methylthiomethyl)pyridine, NNN=bis(2-pyridylmethyl)amine, NSN=bis(2-pyridylmethyl)sulphide] by a series of nucleophiles (Cl⁻, Br⁻, I⁻, N₃⁻, (C₂H₅)₂S, NH₃, thiourea (tu), NO₂⁻, C₅H¹0NH, SeCN⁻, SCN⁻, CN⁻ when L=SNS; Cl⁻, Br⁻, I⁻, N₃⁻, (C₂H₅)₂S, SCN⁻, NH₃, NO₂⁻ when L=NNN; Br⁻, N₃⁻, NO₂⁻, NH₃, C₅H₁₀NH when L=NSN) have been measured in MeOH at 25 °C, μ =0.1 mol dm⁻³ (LiClO₄ or LiCF₃SO₃). The logarithms of the second-order rate constants calculated at μ=0, log k° ₂, do not follow the dependence upon the n° _Pt scale. In particular, the reactivity of the biphilic reagents tu, SeCN⁻, SCN⁻ and, to a lesser extent, NO⁻ ₂, towards these doubly charged substrates is largely lower than expected on the basis of the n° _Ptscale. There are good linear relationships between logk° ₂ for the bis-cationic substrate [Pt(SNS)(py)]²⁺, chosen as the standard, and log k° ₂ for the same reactions with [Pt(NNN)(py)]²⁺, [Pt(NSN)(py)]²⁺ and other double charged complexes previously studied. A new wide nucleophilicity scale based on [Pt(SNS)(py)]²⁺, that is appropriate to all the bis-cationic substrates, is here proposed     

Comparative study of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ions adsorption from dimethyl formamide at Hg- and Ga-electrodes

The adsorption of Cl⁻, Br⁻, and I⁻ ions from their 0.1 M solutions in dimethyl formamide at renewable liquid Hg- and Ga-electrodes was studied under similar experimental conditions by the differential-capacitance and jet-electrode methods. The data obtained points out to a strong effect of the metal nature on adsorption parameters and the halogenide-ion surface activity series. The halogenide-ion surface activity at the Hg-electrode increased in the following sequence: Cl⁻ < Br⁻ < I⁻; at the Ga-electrode, in the reverse sequence: I⁻ < Br⁻ < Cl⁻. The results are explained qualitatively in terms of the Andersen-Bockris model. It follows from the obtained data that (1) the free energy of the metal-halogenide-ion interaction increases in the following sequence: I⁻ < Br⁻ < Cl⁻; (2) the free energy of the Ga-halogenide-ion interaction exceeds that of the Hg⁻halogenide-ion interaction; and (3) the difference of the Cl⁻, Br⁻, and I⁻ ions interaction with the metals increased significantly when passing from Hg⁻ to Ga-electrode.     

Study on ion exchange equilibrium for some uni-univalent and uni-divalent reaction systems using strongly basic anion-exchange resin Duolite A-113

The study on thermodynamics of ion exchange equilibrium for uni-univalent Cl⁻/I⁻, Cl⁻/Br⁻, and uni-divalent Cl⁻/SO₄²⁻, Cl⁻/C₂O₄²⁻ reaction systems was carried out using ion-exchange resin Duolite A-113. The equilibrium constant K was calculated by taking into account the activity coefficient of ions both in solution as well as in the resin phase. The K values calculated for uni-univalent and uni-divalent anion exchange reaction systems were observed to increase with rise in temperature, indicating the endothermic exchange reactions having enthalpy values of 17.21, 36.60, 19.50, 18.43 kJ/mol respectively.     

DDTC-Na-based colorimetric chemosensor for the sensing of cyanide in water

Sodium diethyldithiocarbamate (DDTC-Na) was demonstrated to be a new colorimetric cyanide chemosensor by utilizing an indirect trick. First, some copper ions were added to the colorless aqueous solution of DDTC-Na. Then, the resultant brown solution was studied upon the addition of different anions, including Cl⁻, I⁻, IO₃⁻, SO₄²⁻, NO₂⁻, Br⁻, H₂PO₄⁻, F⁻, SCN⁻, HSO₄⁻, ClO₄⁻ and CN⁻. It was observed by naked eyes that the brown solution changed to colorless immediately after the addition of the trace cyanide, but there were no changes towards other anions, making DDTC-Na a good selective cyanide chemosensor in pure water. Supported by the National Natural Science Foundation of China (Grant Nos. 20674059 & 20402011)     

Electrochemical behaviour of a lead electrode in phosphoric acid

 A lead electrode was studied in 6 and 12 M H₃PO₄. Oxidation of a freshly polished electrode occurred in the −0.5 to −0.3 V vs. SCE range, and led to PbHPO₄ growth on the electrode surface. The dissolution of this layer by electrochemical reduction occurred between −0.5 and −0.7 V. The influence of temperature (20 °C and 65 °C) was investigated and showed that the anodic and the cathodic peaks were increasing, and more markedly for the 12 M H₃PO₄. The ratio Q _cathodic/Q _anodic (Q=electrical charge flowing through the electrode) was equal or close to the unity at 20 °C and decreased as the temperature was increased. The influence of Cl⁻, Br⁻ and I⁻ ions was also evaluated. The addition of Cl⁻ and Br⁻ predominantly led to Pb₅(PO₄)₃Cl and Pb₅(PO₄)₃Br, respectively, while I⁻ led to a mixture of PbI₂ and PbHPO₄. Received: 18 July 1999 / Accepted: 2 November 1999     

Anisotropy of lattice distortion in [Co(NH3)5ONO]X2, X=Cl−, Br−, under hydrostatic pressure of up to 5.0 GPA

Variation of the unit cell parameters of [Co(NH₃)₅ONO]X₂ (X=Cl⁻, Br⁻) as a function of hydrostatic pressure is studied by powder X-ray diffractometry in cooled diamond anvils. Pressures of up to 5.0 GPa lead to anisotropic lattice distortion but not to phase transitions. The anisotropy of lattice compression of the nitrito isomers is qualitatively distinct from that of the related structures of the corresponding nitro isomers, which differ mainly in the structure of complex cations. The following specific interactions are responsible for the anisotropy of compression for both nitrito and nitro isomers: hydrogen bonds between the NO₂ and NH₃ ligands of the neighboring cations and between the NH₃ ligands and the halide anions; specific interactions of the NO₂ ligands of the neighboring cations with each other and of the NO₂ ligands with the halide anions. Institute of Solid State Chemistry, Siberian Branch, Russian Academy of Sciences. Novosibirsk State University. Institute of Mineralogy and Materials Science and Technology Center, Marburg University (Germany). Translated fromZhurnal Strukturnoi Khimii, Vol. 39, No. 3, pp. 424–432, May–June, 1998. This work was supported by the Humboldt Foundation (Germany) and the “Universities of Russia” Program (projects 3H-34-94, 3H-375-92).     

Comparative study of Cl<Superscript>−</Superscript>, Br<Superscript>−</Superscript>, and I<Superscript>−</Superscript> ion adsorption from N-methylformamide at Ga-, (In-Ga)-, and (Tl-Ga)-electrodes

Adsorption of Cl⁻, Br⁻, and I⁻ (Hal⁻) ions from their 0.1 M solutions in N-methylformamide, a solvent with the highest permittivity (182.4 at 25°C), at liquid Ga-, (In-Ga)-, and (Tl-Ga)-electrodes with refreshable surface was studied by the measuring of differential capacitance and by using an open-circuit jet electrode. It is shown that the adsorption parameters and the surface activity series depend significantly on the metal nature. For the (In-Ga)- and (Tl-Ga)-electrodes, like for Hg-electrode, the halogenide-ion surface activity increases in the following series: Cl⁻ < Br⁻ < I⁻; for the Ga-electrode, it varies in the opposite sequence: I⁻ < Br⁻ < Cl⁻. By example of the Ga-electrode in N-methylformamide, it is shown for the first time that the phenomenon of the surface activity series reversal can be observed not only in aprotic solvents but also in protonic ones. The data obtained in N-methylformamide is compared with that obtained in dimethyl formamide and acetonitrile. The halogenide-ion adsorption at the Ga-, (In-Ga)-, and (Tl-Ga)-electrodes decreases in the series N-methylformamide < dimethyl formamide < acetonitrile. The results in aggregate are explained in terms of the Andersen-Bockris model. The data obtained in N-methylformamide, dimethyl formamide, and acetonitrile evidence the increase of ΔG _M-Hal ⁻in the series (Tl-Ga) < (In-Ga) < Ga, that is, with the increasing of the metal work function. This points out the donor-acceptor nature of the metal-halogenide-ion interaction, in which the halogenide-ions are donors of electron pair with respect to the metals.     

Heteronuclear compounds formed in the systems based on Fe(II), Fe(III), Al(III), SO 42? , Cl?-H2O-OH?, and NH3

The possibility of synthesizing heteronuclear compounds in the systems based on Fe(II), Fe(III), Al(III), SO₄²⁻, Cl⁻-H₂O-OH⁻, and NH₃ was studied. A mathematical model based on data on the potentiometric titration was developed. The elemental and phase composition and the structure of the compounds synthesized were determined by the XPA, DTA and NMR methods to optimize the conditions of the synthesis.     

Copper(II)-Catalyzed Decomposition of Hydrogen Peroxide: Catalyst Activation by Halide Ions

Summary.  The catalytic action of Cu(II) on the decomposition of H₂O₂ in near-neutrality aqueous solutions is activated by halide ions. The activation energies amount to 113±7 (parent reaction) and 69.9±1.4 (chloride-activated reaction) kJ · mol⁻¹. Free-radical chain mechanisms are proposed for both the parent reaction and the halide-activated reaction. The catalyst activation caused by halide ions is explained in terms of coordination of halide ligands by both Cu(II) and Cu(I), the coordination causing a higher stabilization of Cu(I) than of Cu(II). At low concentrations, Br⁻ causes an inhibition of the Cu(II)/H₂O₂ reaction. This is explained in terms of an increase of the rate of termination of the chain reaction due to the scavenging effect of OH radicals caused by Br⁻. Received March 27, 2001. Accepted (revised) May 25, 2001.     

Improvement in the determination of traces of uranium in aqueous medium having high dissolved organic carbon and chloride ion by alpha-spectrometry

During this work the determination of uranium in the range of μg·L⁻¹ to tens of μg·L⁻¹ was done by alpha-spectrometry after electroplating the aliquots of water sample using (NH₄)₂SO₄ as an electrolyte. In general, the determination of uranium by alpha-spectrometry needs its separation from other transuranics specially thorium. The process described here does not involve any sample digestion and radiochemical separation of uranium from other transuranics. In this method an aliquot (1 to 3 mL) of the sample was dried and dissolve in (NH₄)₂SO₄ and thereafter the sample was electroplated on a stainless steel (SS) planchet by using an electrochemical cell of special design. The proposed techniques have a distinct advantage over the determination of uranium by adsorptive stripping voltammetry (AdSV) in which uranium-chloranilic (2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone) acid complex was used for concentrating the uranium from the solution. Since in the case of AdSv, the determination of uranium was not possible for samples having dissolved organic carbon (DOC) more than 15 mg·L⁻¹ and Cl⁻ concentration is in the range of 40,000 μ·g⁻¹. In the case of spike experiments with ²³²U the recovery was observed in the range of 90–95% in aqueous medium having higher concentration of Cl⁻ and DOC as indicated above.     

Synthesis and anion recognition of neutral receptors based on multiamide calix[4]arene

Two multiamide calix[4]arenes (5, 6) were synthesized and characterized by NMR, MS and elemental analysis. The binding properties of receptors with some anions (π-O₂NPhOPO₃²⁻, π-O₂NPhO⁻, H₂PO₄⁻, Ac⁻, Cl⁻, Br⁻ and I⁻) were studied by UV-Vis spectra. The results indicate that the tetraamide calix[4]arenes (5, 6) have a good selectivity to the anions containing aromatic ring (π-O₂NPhOPO₃ ²⁻, π-O₂NPhO⁻). The 1 : 1 complexes between host and guest were formed through multiple hydrogen bonding and π-π interactions. The hosts 5 and 6 also show a definite binding ability for the anions (H₂PO₄⁻, Ac⁻, Cl⁻) that have no ultraviolet absorption, which provides a simple method of spectrum detection for these anions.