Effect of beam-plasma interaction on ion transport through a cyclotron injector

The influence of collective effects associated with transverse plasma oscillations excited by a beam of negative ions on the neutralization of the space charge due to fast ions is studied. Conditions for the dynamic deneutralization of an unstable ion beam are refined. Analytic expressions for the plasma ion density distribution and for the stationary electric field in a partially neutralized beam are obtained. The equation of motion of a beam in the self-electric field and in an external magnetic field is used to determine the effect of secondary charged particles on the transport of negative ions through the injector of a cyclotron.     

微型电子回旋共振离子推力器离子源结构优化实验研究

微型电子回旋共振(ECR)离子推力器可满足微小航天器空间探测的推进需求. 为此, 本文开展直径20 mm的微型ECR离子源结构优化实验研究. 根据放电室内静磁场和ECR谐振区的分布特点, 研究不同微波耦合输入位置对离子源性能的影响, 结果表明环形天线处在高于ECR谐振强度的强磁场区域时, 微波与等离子体实现无损耦合, 电子共振加热效果显著, 引出离子束流较大. 根据放电室电磁截止特性, 结合微波电场计算, 研究放电容积对离子源性能的影响, 实验表明过长或过短的腔体长度会导致引出离子束流下降甚至等离子体熄灭. 经优化后离子源性能测试表明, 在入射微波功率2.1 W、氩气流量14.9 μg/s下, 可引出离子束流5.4 mA, 气体放电损耗和利用率分别为389 W/A和15%.     

Beam Probe Space-Potential Measurement in a Minimum-B Field

A measurement of plasma space potential in a minimum-B magnetic field has been made with a particle beam probe. The diagnostic technique is an extension of conventional heavy ion beam probing in that, among other features, the probing beam is neutral rather than ionized cesium and the parallel-plate electrostatic energy analyzer is fully characterized in a new manner which permits its use in complex magnetic confinement geometries.     

2 cm电子回旋共振离子推力器离子源中磁场对等离子体特性与壁面电流影响的数值模拟

电子回旋共振离子推力器(electron cyclotron resonance ion thruster,ECRIT)离子源内等离子体分布会影响束流引出,而磁场结构决定的ECR区与天线的相对位置共同影响了等离子体分布.在鞘层作用下,等离子体中的离子或电子被加速对壁面产生溅射,形成壁面离子或电子电流,造成壁面磨损和等离子体损失,因此研究壁面电流与等离子体特征十分重要.为此本文建立2 cm ECRIT的粒子PIC/MCC(particle-in-cell with Monte Carlo collision)仿真模型,数值模拟研究磁场结构对离子源内等离子体与壁面电流特性的影响.计算表明,当ECR区位于天线上游时,等离子体集中在天线上游和内外磁环间,栅极前离子密度最低,故离子源引出束流、磁环端面电流和天线壁面电流较低.ECR区位于天线下游时,天线和栅极上游附近的等离子体密度较高,故离子源引出束流、天线壁面电流和磁环端面电流较高.腔体壁面等离子体分布与电流受磁场影响最小.     

磁场调控型离子源的设计与实验

磁场调控型离子源在离子源等离子体扩散空间中引入轴向强脉冲磁场,磁场起两方面的作用,一是形成潘宁放电效应,使原子、气体分子碰撞电离效率增加;二是在脉冲强磁场的作用下,强轴向磁场将质量较轻的离子约束在轴线上,对质量较重的金属离子约束能力较弱,导致其在等离子体膨胀引出通道中碰壁损失,能够提升引出轻离子的比例。开展了磁场调控的离子源放电结构、强脉冲螺线管磁场以及引出束流光学结构的设计;测量分析了引出离子流强和离子打靶束斑形貌。研究结果表明,强轴向磁场通过等离子体对混合离子成分的筛选作用,可有效提高引出离子流强中的轻离子成分比例。     

Acceleration of dust grains by means of the high energy ion beam

The acceleration of charged dust grains by a high energy ion beam is investigated by obtaining the dispersion relation. The Cherenkov and cyclotron acceleration mechanisms of dust grains are compared with each other. The role of dusty plasma parameters and the magnetic field strength in the acceleration process are discussed. In addition, the stimulated waves by an ion beam in a fully magnetized dust–ion plasma are studied. It is shown that these waves are unstable at different angles with respect to the external magnetic field. It is also indicated that the growth rates increase by either increasing the ion and dust densities or decreasing the magnetic field strength. Finally, the results of our research show that the high energy ion beam can accelerate charged dust grains.     

不同磁路电子回旋共振离子源引出实验

空间推进所用的电子回旋共振离子源(ECRIS)应具有体积小、效率高的特点. 本文研究的ECRIS使用永磁体环产生磁场, 有效减小了体积, 该离子源利用微波在磁场中加热电子, 电子与中性气体发生电离碰撞产生等离子体. 磁场在微波加热电子的过程中起关键作用, 同时影响离子源内等离子体的约束和输运. 通过比较四种磁路结构离子源的离子电流引出特性来研究磁场对10 cm ECRIS性能的影响. 实验发现: 在使用氩气的条件下, 特定结构的离子源可引出160 mA的离子电流, 最高推进剂利用率达60%, 最小放电损耗为120 W·A^-1; 所有离子源均存在多个工作状态, 工作状态在微波功率、气体流量、引出电压变化时会发生突变. 离子源发生状态突变时的微波功率、气体流量的大小与离子源内磁体的位置有关. 通过比较不同离子源的引出离子束流、放电损耗、气体利用率、工作稳定性的差异, 归纳了磁场结构对此种ECRIS引出特性的影响规律, 分析了其中的机理. 实验结果表明: 保持输入微波功率、气体流量、引出电压不变时, 增大共振区的范围、减小共振区到栅极的距离, 离子源能引出更大的离子电流; 减小共振区到微波功率入口、气体入口的距离能降低维持离子源高状态所需的最小微波功率和最小气体流量, 提高气体利用率, 但会导致放电损耗增大. 研究结果有助于深化对此类离子源工作过程的认识, 为其设计和性能优化提供参考.     

Temperature and density measurements in a non-axisymmetric,continuously operating fusion experiment using a heavy ion beam probe

Two-dimensional electron temperature and density data have been obtained in the midplane of the non-axisymmetric magnetic confinement device ELMO Bumpy Torus (EBT) through the use of a heavy ion beam probe. This beam probe differs from others operated on toroidal or open magnetic geometries in its combination of complete computer control with the steady-state nature of EBT which allows, under normal operating conditions, for extensive calibration of the system in situ, minimizing both alignment and acquisition errors, along with the use of synchronous detection to dramatically improve the quality of the detected signal over what is typically possible in fast pulse devices. These techniques are important and applicable to long pulse devices where the beam probe may be an ideal diagnostic to measure, for example, parameters of the edge plasma. While the EBT beam probe was implemented to obtain profiles of plasma space potential, we have found that it can also be used effectively to measure the temperature and density profiles in the midplane between magnetic field coils. The data obtained support the contention that the formation of a hollow temperature profile in the T-Mode sufficiently inverts the plasma pressure such that stability of the core plasma would be expected even without diamagnetic effects from the hot electron rings which have previously been considered essential     

Effects of downstream magnetic field collimation on ion behavior inelectron cyclotron resonance microwave plasma

Effects of a magnetic held collimation on ion behavior in the downstream region of an electron cyclotron resonance (ECR) plasma device are clarified experimentally using a directional ion energy analyzer. The drift energy and its spread of the ion beam observed in the downstream region decrease and the beam temperature increases with the collimating magnetic flux density. Then, the ion temperature measured perpendicular to the axis of the plasma stream slightly decreases. The ion beam is found to be almost parallel to the magnetic field lines, that is, the beam tends to be collimated     

CSR电子冷却系统强流电子束包络的振荡特性

 HIRFL CSR的电子冷却系统是采用强流电子束对重离子束进行冷却。在冷却段漂移管区，由于强流电子束自身的空间电荷场和螺线管磁场的作用，使得电子束的包络发生振荡。通过求解电子束的横向包络方程，研究了强流电子束包络随电子束参数和螺线管聚焦磁场的变化关系。计算结果表明：对于不同的电子束能量和磁场，电子束包络的振荡频率也不相同；在相同的条件下，磁场越强，电子束包络振荡幅度越小，电子束能量越大，其包络的振荡频率也越快。     

On the Focussing and Transmission Properties of Electron Beam in High Power Microwave Sources Filled with Plasma

Based on the electron movement principles the beam paraxial trajectory and space trajectory equation in drifting space filled with plasma are given in this paper. The space is divided into two areas( and , contains ₁ and ₂), the behavior of electrons in these areas is studied. The equations are theoretically or numerically solved, the focussing and transmission properties are studied and some parameters affecting these properties are discussed in detail. The relativistic effect is also taken into account. The study shows that with plasma filled the beam can be focused efficiently and transmitted with high quality by optimally choosing the plasma filling fraction and the voltage.Plasma microwave electronics stemmed from 1949, however, it developed rapidly in recent years. In the process of high power microwave study, plasma is more and more introduced into microwave source. Because of the neutralization effect of plasma, the beam can transmit with high quality, even under weak or without magnetic field, it can propagate through drifting tube or slow wave structure by its self magnetic focusing force^[1–2]. By making full use of this property, microwave devices without magnetic field system can be made, this leads to a decrease in volume and weight of the device. Some experiments show that this kind of device can promote the output power and efficiency obviously. However, because of the presence of plasma, the beam's behavior changes greatly compared to those under vacuum condition. It is important to study the properties of the beam in drifting space or slow wave structure filled with plasma for the development of the device.     

Ion-beam focusing in a double-plasma device

The authors studied the propagation of a low-energy charge-neutralized ion beam injected into the target region of a long double-plasma device. A magnetic field of up to ~180 G may be applied along the axis of the device. As a result of charge exchange collisions, the ion beam is attenuated as it propagates into the target region. However, under certain conditions of magnetic field strength and neutral gas pressure, the authors have observed a `reemergence' of the beam on axis far downstream in the target. This reemergence of the ion beam is attributed to a focusing of the ions by a self-consistently produced radial ambipolar electric field. The effect may be expected to occur in other types of plasma devices as well, whenever a sufficiently large radially inward electric field is present     

The heavy ion beam diagnostic for the tokamak ISTTOK

In this paper we describe the heavy ion beam diagnostic for the tokamak ISTTOK, which has been designed to determine the temporal evolution of the plasma density, poloidal magnetic field and plasma potential profiles. This diagnostic makes use of a new type of high density caesium plasma source, a multiple cell detector and a fast data acquisition system. We describe the numerical code for trajectory and beam attenuation simulations, a method for the experimental determination of the poloidal field profile, the ion gun and the detection, control and data acquisition systems. Calibration tests and the first experimental results are presented     

“神龙—Ⅰ”直线感应加速器束流输运系统设计

系统分析了强流相对论电子束在输运过程中影响束流品质的几种因素,针对束流不同能区凸现的主要矛盾,采取对应性措施以抑制空间电荷效应,束包络振荡和束心横向运动,所有措施归结到束流输运系统设计上表现为合适的束输运半径和匹配磁场的选取,提出了束流输运磁场配置的一般策略,初步设计了“神龙－Ⅰ”直线感应加速器束流输运系统的总体布局。     

“神龙-I”直线感应加速器束流输运系统设计

 系统分析了强流相对论电子束在输运过程中影响束流品质的几种因素,针对束流不同能区凸现的主要矛盾,采取对应性措施以抑制空间电荷效应、束包络振荡和束心横向运动。所有措施归结到束流输运系统设计上表现为合适的束输运半径和匹配磁场的选取,提出了束流输运磁场配置的一般策略,初步设计了“神龙 I”直线感应加速器束流输运系统的总体布局。     

2.45GHz ECR 强流等离子体源核心部件设计与实验研究

电子回旋共振(Electron Cyclotron Resonance,ECR)等离子体源能产生高电荷态离子、高流强的单电荷态离子,提供稳定的束流和良好的重复性.核心部件的设计对ECR等离子体源是至关重要的,磁场对等离子体的生成和分布有直接影响,良好的磁场可以提高等离子体的性能和效率.采用有限元分析方法对ECR等离子体源磁场进行分析与设计,得到了满足设计需求与目标的磁场位形,通过高斯计对设计的永磁环轴向磁场精确测量,发现磁场仿真结果与实验结果吻合比较好,只是轴向磁场最大值及对应位置上有点偏差.通过集成实验,研究核心部件对离子源引出束流强度的影响,引出束流稳定且强度达到7 m A.     

Study on the Relation Between Discharge Voltage and Magnetic Field Topography in a Hall Thruster Discharge Channel

The relation between magnetic field topography and operating voltage is investigated in a 1kW Hall thruster discharge channel in order to focus the ion beam effectively and optimize the performance. The curvature of magnetic field line (α) is introduced to characterize the differences of topologies. The optimized magnetic field distribution under each operating voltage is obtained by experiment. Through the curvature transformation, we find that the area of (α > 1) in the channel gradually decreases with the increase of the operating voltage. In response to the results above, two dimensional plasma flows are simulated employing Particle‐in‐Cell method. The distributions of the electric potential, ion density and ion radial velocity are calculated to understand the important influence of the relation above on ion beam focusing. The numerical results indicate that magnetic field curvature and thermal electric field control the ion beam in the ionization and acceleration zone, respectively. The magnetic field topography and discharge voltage interact with each other and together form the focusing electric field. The ion radial mobility is suppressed effectively and the ion beam is focused to the channel centerline. In addition, for a given voltages, when the area of (α > 1) is larger than the optimal scope, the electric potential lines excessively bend to the anode causing ion over focus; contrarily, the electric potential lines will bend to the exit and defocus ions. All these results suggest the relation between magnetic field topography and discharge voltage is important to the ion radial flow control and performance optimization of the Hall thruster (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

ECR离子源束流发射度的实验研究

利用最新自行研制的电扫描发射度探测系统, 在ECR离子源上进行了一系列关于ECR离子源引出束流发射度的研究. 这套电扫描发射度探测系统安装在中国科学院近代物理研究所(兰州)的LECR3试验平台的束运线上. 试验中, 通过测量相关参数, 研究了磁场、微波、掺气效应及负偏压效应等对引出束流发射度的影响. 利用实验所得的结果与关于ECR等离子体和离子源束流发射度的半经验理论, 分析推导了离子源各可调参数与ECR等离子体的直接关系, 这为分析探索ECR离子源的工作机制提供了一定的参考依据.     

磁边界效应对径向磁场中等离子体束流运动轨迹的影响

根据离子与径向磁场的约束关系,用面向对象的单元粒子法模拟了极向偏转器中等离子体束流在均匀和非均匀径向磁场中的运动情况,得到了在磁边界效应下极向偏转器内部畸变电场的分布,分析了对质量分离的影响。模拟成果对质量分离器、质谱分析仪及材料提纯等装置的研制、特殊位形电磁场控制多质量束流等相关领域的研究有参考价值。     

非理想氢原子束真空环境长程传输模拟研究

模拟研究了非理想氢原子束在真空环境下的长程传输效应。根据中性化程度的不同,将非理想束分为欠中性束和过中性束。通过建立束流传输的准电磁模型,研究了束流密度、中性化因子、空间磁场和弹性散射等因素对非理想氢原子束的影响。结果表明:对于欠中性束,负氢离子的存在对氢原子的传输几乎没有影响,因此欠中性束的发射装置可以考虑去除偏置磁场,以减小设备体积和质量;对于过中性束,束流损失率与束流密度和中性化因子有关,即束流密度越大,束流损失越大;中性化因子越高,束流损失就越高;而无论是欠中性束还是过中性束,空间磁场和粒子间的弹性散射对其传输都没有影响。