Subphthalocyanine-based nanocrystals

Ultra high vacuum scanning tunnelling microscopy revealed chlorosubphthalocyanine to self-organize into discrete well-defined bilayer and trilayer triangular nanocrystallites when evaporated onto a Cu(111) surface.     

RNA-templated semiconductor nanocrystals

The use of a biomolecular RNA template for the synthesis of CdS semiconductor nanocrystals is described. Transfer RNA, with a well-defined three-dimensional structure, is used as a scaffold and ligand system in the aqueous synthesis of CdS. We have found that nanocrystal structures can be modulated by the structure of the templating tRNA. When possessing a folded three-dimensional structure, tRNA-templated synthesis yields a single product. If the same tRNA is rendered unstructured through the introduction of destabilizing mutations, a range of products are observed. The results reported indicate that biomolecules can be used to systematically engineer the structures and properties of semiconductor-based materials, and that the synergy between the dimensions of nanostructures and biomolecules provides a means to tune the properties of materials with nanoscale precision.     

Copper oxide nanocrystals

It is well-known that inorganic nanocrystals are a benchmark model for nanotechnology, given that the tunability of optical properties and the stabilization of specific phases are uniquely possible at the nanoscale. Copper (I) oxide (Cu(2)O) is a metal oxide semiconductor with promising applications in solar energy conversion and catalysis. To understand the Cu/Cu(2)O/CuO system at the nanoscale, we have developed a method for preparing highly uniform monodisperse nanocrystals of Cu(2)O. The procedure also serves to demonstrate our development of a generalized method for the synthesis of transition metal oxide nanocrystals. Cu nanocrystals are initially formed and subsequently oxidized to form highly crystalline Cu(2)O. The volume change during phase transformation can induce crystal twinning. Absorption in the visible region of the spectrum gave evidence for the presence of a thin, epitaxial layer of CuO, which is blue-shifted, and appears to increase in energy as a function of decreasing particle size. XPS confirmed the thin layer of CuO, calculated to have a thickness of approximately 5 A. We note that the copper (I) oxide phase is surprisingly well-stabilized at this length scale.     

The thermostability and reactivity of GaP nanocrystals in oxygen: from GaP nanocrystals to Ga2O3 nanocrystals

The thermostability and reactivity of GaP nanocrystals in O(2) were investigated using the thermogravimetric analysis (TGA), differential thermal analysis (DTA), powder X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analysis techniques. alpha-Ga(2)O(3) nanoparticles, nano-hollow-particles, or nanorods and nanotubes can be separately obtained from the oxidation of nanocrystalline GaP at 400 degrees C for 30 min in dry O(2) atmosphere via manipulating different heating rates. Transmission electron microscopy (TEM) and energy-dispersive X-ray spectrometry (EDX) analysis showed that the products were all alpha-Ga(2)O(3) but with different morphologies when different heating rates were applied. The formation mechanisms of the different morphological alpha-Ga(2)O(3) nanocrystals were discussed.     

Tubular-shaped stoichiometric chrysotile nanocrystals

Stoichiometric chrysotile tubular nanocrystals have been synthesized as possible starting materials for applications toward nanotechnology, and as a standard reference sample for the investigation of the molecular interactions between chrysotile, the most utilized asbestos, and biological systems. Chrysotile nanocrystals have been synthesized under controlled hydrothermal conditions, and have been characterized by chemical, morphological, structural, spectroscopic and microcalorimetric analyses. They show a constant "cylinder-in-cylinder" morphology constituted by two or three concentric subunits. Each single nanocrystal has a tubular shape of about 49+/-1 nm in outer maximum diameter, and a hollow core of about 7+/-1 nm. Structural investigation carried out on an X-ray powder pattern allowed to improve the structural model proposed for chrysotile mineral samples. Synthetic chrysotile crystallizes in the monoclinic Cc space group with a=0.5340(1) nm, b=0.9241(1) nm, and c=1.4689(2) nm, beta=93.66(3) degrees.     

Transformative two-dimensional layered nanocrystals

Regioselective chemical reactions and structural transformations of two-dimensional (2D) layered transition-metal chalcogenide (TMC) nanocrystals are described. Upon exposure of 2D TiS(2) nanodiscs to a chemical stimulus, such as Cu ion, selective chemical reaction begins to occur at the peripheral edges. This edge reaction is followed by ion diffusion, which is facilitated by interlayer nanochannels and leads to the formation of a heteroepitaxial TiS(2)-Cu(2)S intermediate. These processes eventually result in the generation of a single-crystalline, double-convex toroidal Cu(2)S nanostructure. Such 2D regioselective chemical reactions also take place when other ionic reactants are used. The observations made and chemical principles uncovered in this effort indicate that a general approach exists for building various toroidal nanocrystals of substances such as Ag(2)S, MnS, and CdS.     

Monodisperse lanthanide oxysulfide nanocrystals

Monodisperse lanthanide oxysulfide nanoplates and short nanorods were synthesized by the thermal decomposition of molecular precursors in the presence of oxygen. The nanoplates have uniform thicknesses and further self-organize to nanowires up to micron scale. The Eu2O2S and Eu3+-doped Gd2O2S nanocrystals both show unusual fluorescence properties obviously differing from the bulk powder phosphors, which are related to the surface-modification effects.     

Nanocable-aligned ZnS tetrapod nanocrystals

An effective method for synthesizing ZnS-core/carbon-sheath nanocables and nanocable-aligned ZnS tetrapod nanocrystals has been developed. Nanocable heterostructures and nanocable-linked ZnS tetrapods were synthesized in a controllable way. The tetrapods are single crystalline cubic ZnS with triangular-prism branches stretching out in four {111} directions. The tetrapods were aligned together with ZnS-C nanocables along the [100] direction.     

Carbon supported CdSe nanocrystals

Insights to the mechanism of CdSe nanoparticle attachment to carbon nanotubes following the hot injection method are discussed. It was observed that the presence of water improves the nanotube coverage while Cl containing media are responsible for the shape transformation of the nanoparticles and further attachment to the carbon lattice. The experiments also show that the mechanism taking place involves the right balance of several factors, namely, low passivated nanoparticle surface, particles with well-defined crystallographic facets, and interaction with an organics-free sp2 carbon lattice. Furthermore, this procedure can be extended to cover graphene by quantum dots.     

Preparation of cellulose nanocrystals and carboxylated cellulose nanocrystals from borer powder of bamboo

Carboxylated cellulose nanocrystals (CCN) and cellulose nanocrystals (CNC) were prepared from borer powder of bamboo by two different kinds of procedures: one-step approach with ammonium persulfate for CCN and two-step approach with sulfuric acid for CNC. The obtained samples were characterizated by transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and thermogravimetric analysis. The results show that the particles of CCN and CNC present spherical shape with diameters of 20–50 and 20–70 nm, respectively. The crystallinity of CCN and CNC is significantly improved after a series of chemical treatment, which is up to 62.75 and 69.84 %, respectively. The research indicates that the borer powder from bamboo could be an excellent raw material for manufacturing CNC in a low-cost and environmental-friendly way. Rational and sustainable utilization of the bamboo borer powder to develop new bioproducts holds great potential value for industry and offers many benefits and opportunities.     

Electrochemical probing of thiol-capped nanocrystals

Electrochemical studies of thiol-capped semiconductor nanocrystals have demonstrated several distinct oxidation and reduction peaks in the voltammograms with the peak positions being nanocrystal size dependent. It is demonstrated that the method is very sensitive to the nanocrystal surface states, providing complimentary information for better understanding the optical properties of semiconductor nanocrystals. Correspondence: Alexander Eychmüller, Physical Chemistry, TU Dresden, Bergstr. 66b, D-01062 Dresden, Germany     

Sorting fluorescent nanocrystals with DNA

Semiconductor nanocrystals with narrow and tunable fluorescence are covalently linked to oligonucleotides. These biocompounds retain the properties of both nanocrystals and DNA. Therefore, different sequences of DNA can be coded with nanocrystals and still preserve their ability to hybridize to their complements. We report the case where four different sequences of DNA are linked to four nanocrystal samples having different colors of emission in the range of 530-640 nm. When the DNA-nanocrystal conjugates are mixed together, it is possible to sort each type of nanoparticle by using hybridization on a defined micrometer-size surface containing the complementary oligonucleotide. Detection of sorting requires only a single excitation source and an epifluorescence microscope. The possibility of directing fluorescent nanocrystals toward specific biological targets and detecting them, combined with their superior photostability compared to organic dyes, opens the way to improved biolabeling experiments, such as gene mapping on a nanometer scale or multicolor microarray analysis.     

Synthesis of colloidal uranium-dioxide nanocrystals

In this paper, we have developed an organic-phase synthesis method for producing size-controlled, nearly monodispersed, colloidal uranium-dioxide nanocrystals. These UO2 nanocrystals are potentially important to applications such as nuclear fuel materials, catalysts, and thermopower materials. In addition, we have systematically mapped out the functions of the solvents (oleic acid, oleylamine, and 1-octadecene) in the synthesis, and we found that N-(cis-9-octadecenyl)oleamide-a product of the condensation of oleic acid and oleylamine-can substantially affect the formation of UO2 nanocrystals. Importantly, these results provide fundamental insight into the mechanisms of UO2 nanocrystal synthesis. Moreover, because a mixture of oleic acid and oleylamine has been widely used in synthesizing a variety of high-quality metal or metal-oxide nanocrystals, the results herein should also be important for understanding the detailed mechanisms of these syntheses.     

Synthesis of monodisperse spherical nanocrystals

Much progress has been made over the past ten years on the synthesis of monodisperse spherical nanocrystals. Mechanistic studies have shown that monodisperse nanocrystals are produced when the burst of nucleation that enables separation of the nucleation and growth processes is combined with the subsequent diffusion-controlled growth process through which the crystal size is determined. Several chemical methods have been used to synthesize uniform nanocrystals of metals, metal oxides, and metal chalcogenides. Monodisperse nanocrystals of CdSe, Co, and other materials have been generated in surfactant solution by nucleation induced at high temperature, and subsequent aging and size selection. Monodisperse nanocrystals of many metals and metal oxides, including magnetic ferrites, have been synthesized directly by thermal decomposition of metal-surfactant complexes prepared from the metal precursors and surfactants. Nonhydrolytic sol-gel reactions have been used to synthesize various transition-metal-oxide nanocrystals. Monodisperse gold nanocrystals have been obtained from polydisperse samples by digestive-ripening processes. Uniform-sized nanocrystals of gold, silver, platinum, and palladium have been synthesized by polyol processes in which metal salts are reduced by alcohols in the presence of appropriate surfactants.     

Light-emitting diodes with semiconductor nanocrystals

Colloidal semiconductor nanocrystals are promising luminophores for creating a new generation of electroluminescence devices. Research on semiconductor nanocrystal based light-emitting diodes (LEDs) has made remarkable advances in just one decade: the external quantum efficiency has improved by over two orders of magnitude and highly saturated color emission is now the norm. Although the device efficiencies are still more than an order of magnitude lower than those of the purely organic LEDs there are potential advantages associated with nanocrystal-based devices, such as a spectrally pure emission color, which will certainly merit future research. Further developments of nanocrystal-based LEDs will be improving material stability, understanding and controlling chemical and physical phenomena at the interfaces, and optimizing charge injection and charge transport.     

Nucleotide-directed growth of semiconductor nanocrystals

We engineer colloidal quantum dot nanocrystals through the choice of biomolecular ligands responsible for nanoparticle nucleation, growth, stabilization, and passivation. We systematically vary the presence of, and thereby elucidate the role of, phosphate groups and a multiplicity of functionalities on the mononucleotides used as ligands. The results provide the basis for synthesis of nanoparticles using precisely controlled synthetic oligonucleotide sequences.     

Phosphine-free synthesis of CdSe nanocrystals

High quality CdSe nanocrystals have been prepared using elemental selenium as the chalcogenide precursor dispersed in 1-octadecene (ODE). The conditions used to prepare the Se precursor were found to be critical for successful nanocrystal synthesis. Systematic titration of the Se precursor solution with tri-n-octylphosphine (TOP) allowed the Se reactivity to be tuned and the final particle size to be controlled. Band-edge and surface related emission were observed for samples prepared in the presence and absence of added TOP. In the absence of a selenium passivant, the crystal structure of CdSe nanocrystals could be altered from zinc blende to wurtzite by the addition of bis(2,2,4-trimethylpentyl)phosphinic acid (TMPPA).